scraping knife

A handful of scraping knife in the lifetime of even grinding to a few millimetres in width, has been able to continue to work.

The adoption of closed-end scraping knife system, you can ensure that roller and a printing plate for best inking.

But at much higher speed, scraping knife can even drop to the top of the paper in its teeth.

The plates in the plates of the rollers, scraping knife components and nano-imprint lithography drum composition of gravure press.

Furthermore a printing plate in axial and circumferential support area and scraping knife, which created an inevitable differences.

the elongated object can be an elongated needle, or an elongated helicoid; or a triangle scraping knife-shaped.

Roller, stainless steel scraping knife and machine is new, vibration problem does not exist.

Scraping knife blade stainless steel materials Division and polyester plastic scraper.

scraping knife blade too sharp: should make scraping knife for cutting edge a little flat.

Business card printing and membership card when should avoid contact with and use the tip of moderate scraping knife.

If scraping knife gap smaller, which can be oilstone or 2, smooth abrasive to fine sandpaper.

The following scraping knife in the application of gravure printing and involves some problems on some views.

and adjust the scraping knife on the printing plate angle and distance, the power-on test.

Double scraping knife design, double effect, strength the.

The amount of low ink roller, scraping knife and plates are the three chnia the key control configuration.

pushback ink UN-uniform-scraping knife adjustment.

Based on the current state of technology, using the more soft scraping knife through the silk screen ink it.

To do this, set on flexo printing machine scraping knife.

scraping knife blade or having foreign body below.

After scraping knife wear-and-replace pboblems cleaning tool holder and envirogluvtm in the blade.

8 scraping the ink roller coating along the surface of the scraping knife, and then set the locking pin allocated;

secondly, subject to the printing plate and scraping knife wettability, plates and shallow;

If the roller without scraping knife, you can check your COTS roundness and cots gear and bearing wear;

scraping knife lifting device is rack gear, you can implement the regulation of pressure;

in the mixed with residues scraping knife scratch;