friction and wear

The fully supported guide rods minimize friction and wear between the pistons and the body bore.

This sidesteps the need for a linkage, and reduces the number of moving parts, friction and wear.

The oil is fed to the bearings of the cam shafts to lubricate, minimising friction and wear, thereby enhancing the engine's reliability.

Therefore, it is of great importance to exploit new metal matrix composites to friction and wear.

Thebetter results were got by testing the materials' mechanical performances and its friction and wear performances.

Evaluation of Friction and Wear Properties of Polymeric Materials for Use in Total Joint Prostheses using Micro-Tribometer mod.

Space is too small will cause pump impeller and a shell friction and wear.

Flake vermiculite has some good effects on the friction and wear properties of friction composites at high temperatures.

Because of their ability to reduce friction and wear, they are usually used as the material for making the worm wheel in a worm gear set.

Plastics. Friction and wear by sliding. Definitions of terms and general characteristics.

The effects of graphite content on properties and mechanism of friction and wear of copper base material were studied.

The laser-textured specimen showed better friction and wear characteristics than that of smooth specimen.

The friction and wear existing in the course of cylinder operation will directly put impact on the engine performance.

Effects of different graphite particle contents on friction and wear behavior of AZ91 magnesium matrix composites were investigated.

The electrical friction and wear mechanism of silver -carbon nanotube composites will be discussed.

Invasive micro-pump system dust particles, can cause or exacerbate the hydraulic friction and wear components, and further lead to leakage.

An automatic measuring and testing system for end-face friction and wear experiment was designed.

Thermal spraying is an important way to improve friction and wear resistance of part surface and to delay wear and invalidation of parts.

The process of friction and wear in stages of breaking-in, steady wear, scuffing and frictional noises were studied.

gas flows vertically between fins , which can reduce the friction and wear .

Both of which contribute to the formation of boundary lubricating film, so the friction and wear is reduced.

too rough, increased friction and wear, the same result Early oil seal failure.

By using self-made dry sliding friction pin-disk tester, the dry sliding friction and wear characteristics of 45 were investigated.

And the wear resistance of coatings was analyzed through friction and wear test.

The experimental results show that B20 soybean biodiesel has best behaviour of friction and wear.

Load and glide velocity had effect on friction and wear behavior of composites.

The effect of sliding velocity and the current density on electrical friction and wear performance of the Ag-MoS_2-G-CNTs was studied.

Soft cutting tools are excellent in friction and wear resistance, which break a new field of coating technology.

In this paper the failure mode and failure mechanism due 1o friction and wear in instrumentation are dealt with thecretically.

Friction and wear are caused by metal-to-metal contact of the moving parts.

In this paper, a bearing test device was developed based on the YTH-1000 type friction and wear test machine.

Effective lubrication can not only reduce friction and wear, but also improve the quality of the surface.

Rubber is important raw and processed materials in national economy, therefore it is of importance to study the friction and wear of rubber.

Research on the Friction and Wear of the Nylon Coating Used to Protect the Surface of the Flexible Continuous Sucker Rod

The friction-wear test machine is used to study friction and wear about rod-having pump system.

Study on the Friction and Wear Behavior of Several Frictional Pairs Used for Worm Drive under Dry Sliding Condition

Friction and Wear Behavior of NiTi Shape Memory Alloy Used for Orthopaedics Fixation

Study of the Friction and Wear Behavior of Laser Micro-Precisely Treated Alloy Cast Iron under Lubrication

Study of Friction and Wear Behavior of Ultrahigh Molecular Weight Polyethylene in Different Sliding Model

Study of Self-repair Property and Mechanism of Nano Cu as Lubricating Oil Additives under Oscillating Friction and Wear

Study of the Effects of Lubricating-Oil Additives on Friction and Wear Properties of Polymers

Friction and Wear Characteristics of Aluminum Matrix Composites and its Application in the Automotive Industry

Structural Optimization and Friction and Wear Behavior of a Radial Spherical Plain Bearing

The Friction and Wear Behavior of Some Materials Used for Bottom Pintles of Miter Gates

Development and Application of a Friction and Wear Experiment Software Testing System

Comparative Study of the Friction and Wear Behavior of Natura lTooth and Several Dental Prosthetic Materials

A Study on the Friction and Wear Behavior of Polyoxymethylene Filled with Regenerated Polytetrafluoroethylene Powders

ultra-high molecular weight polyethylene; modification; mechanical property; friction and wear property;

Friction and Wear Study of High Polymer Materials for Slanting Wedge Applied on Railway Wagon

Friction and Wear Behavior of Organic Molybdenum and Its Composite with Nano-particle Anti-Wear Additive

Microstructure and Friction and Wear Behavior of Induction Clad Ni-Based Composite Coating Reinforced with Micro- and Nano-WC Particulates

The Friction and Wear Characteristics of the Solid Film Lubricant and Its Function in the Oil

Study of friction and wear of nano grade nickel power on improving lubricant properties

Friction and Wear Behavior of Polytetrafluoroethylene Fabric Composite Spherical Bearing in Swaying

Friction and Wear Behaviors of Sucker Rod and Tubing String in the Presence of Oil-Field Wastewater as the Lubricating Medium

Friction and Wear Behavior of Rod-Like Mullite Dispersed Yttria-Stabilized Tetragonal Zirconia Polycrystal Ceramics

Research Situation and Prospects for Effect of a Magnetic Field on Friction and Wear of Metals

Friction and Wear Characteristics of Plastic Alloy Bearings under Different Lubricating Condition

Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

Single-pass Pendulum Scratching Test and Its Applications to Friction and Wear of Materials

Experimental Study on Friction and Wear of Copper-based Sintered Alloy and Copper-graphite Sintered Alloy against Stainless Steel

Study on Mechanism of Friction and Wear of Aluminum Matrix Composites and Its Applications

Friction and Wear Properties of Carbon Black Filled Ultrahigh Molecular Weight Polyethylene Composite

Study on Friction and Wear Characteristics of Polyethylene Engineering Plastic with Ultra High Molecular Weight

Effects of Different Lubricating Condition on Friction and Wear Characteristics of Plastic Alloy Bearings

Investigation of the Friction and Wear Behavior of Fiber Reinforced MC Nylon Under Water Lubrication

Friction and Wear Behavior of Non-Hydrogen Carburizing Layer on Titanium Alloy Surface Prepared by Arc-Added Glow Discharge Plasma

Study on Friction and Wear Performance of Ultra High Molecular Weight Polyethylene Plastic Composite Material

Effect of Polypropylene and Molybdenum Disulfide on Friction and Wear Behavior of Ultra High Molecular Weight Polyethylene

Study on Dry Friction and Wear Properties of Copper-matrix Composites Reinforced with Nitrides Ceramics Particles

Research on Friction and Wear Behaviors of Particle Reinforced Aluminum Matrix Composites under Dry Sliding

Study on Friction and Wear Characteristics of Carbon Fiber Composite Friction Materials for Automotive

Friction and Wear Properties of Polypropylene, Carbon Black, Carbon Fiber Filled UHMWPE Composite

Study on the Friction and Wear Properties of Glass Cloth Composites Filled with Various Nano- and Micro-Particles

Friction and wear properties of PTFE composites under different lubrication conditions

Improvement of friction and wear properties of pin bush used in passenger coach

Study on Friction and Wear Characteristic of Nickel Based Self-Lubricating Composites in Slight-Moved Friction

mechanical properties were researched by scratch test detector, friction and wear test detector;

Study on Friction and Wear Properties of Two Ni-based Alloys at Elevated Temperature

Friction and Wear Properties of SiC Particulate Reinforced Aluminum Matrix Composites

Manufacture of Friction and Wear Experimental Machine with Automatic Adjusting System

Effect of Graphite on the Friction and Wear Properties of Cu Alloy-Matrix Self-Lubricating Composites at Elevated Temperature

The Friction and Wear Behavior of Polyethersulfone Composites Reinforced with Carbon Fiber

Progress of Friction and Wear Properties of Ultra High Molecular Weight Polyethylene Composites

Effects of Preheat Treatment on the Friction and Wear Properties of Ultra High Molecular Weight Polyethylene

Friction and Wear Behavior of Diamond-Like Carbon Film Prepared by Plasma Enhanced Chemical Vapor Deposition

Friction and Wear Behavior of WC-Co Coatings Sprayed by Nanoscale and Conventional Powders in Dry and Water Environment

Friction and Wear Behavior of Two Semi-metallic Friction Materials

Friction and Wear Properties of a High Strength Al Alloy-PTFE Fabric Composite

Effects of Lubricating-Oil Additives on Friction and Wear Properties of Polymers and Their Composites

Dry Sliding Friction and Wear Characteristics of Elastic-metallic-plastic Composite

Comparison of Different Materials on Ferroalloy Embedded Bearing's Friction and Wear Behavior

Friction and Wear Behavior of Diamond-Like-Carbon Film on Titanium Alloy Surface Prepared by Liquid-Deposition

Friction and Wear Properties of Cast-iron Material with Bionic Non-smooth Surface under Normal Temperature

Study of Friction and Wear Behavior of Antiwear Ring of Turbines

Friction and Wear Characteristics of Al-Pb Alloy Modified by High-current Pulsed Electron Beam Processing

Friction and Wear Behavior of Diamond-like Carbon Multilayer Films in Different Environments

Effect of hBN and Calcined Petroleum Coke on Friction and Wear Properties of Phenolic Resin-based Friction Composites

Friction and Wear of Nanoparticles in Lubricants--Present Status and Development Trends

Study on Friction and Wear Properties of Alloying Layer using Plasma Surface Alloying Technology

Effect of Grain Size on the Friction and Wear Properties of Electrodeposited Nanocrystalline Cobalt

Development of the New Friction and Wear Tester for Teaching and Its Testing System

Friction and Wear Characteristics of Silicon Carbide Composite Doped With Nickel in Dry Sliding

Influence of Different Materials on Copper Alloys Embedded Bearing's Friction and Wear Behavior

Friction and Wear Behavior of Boron Permeated Layer on Mild Carbon Steel under Oil-lubricated Condition

Study on the Friction and Wear Characteristics of Plastic Bearings under Water Lubrication

Plastics - Friction and wear by sliding - Identification of test parameters

Effect of Electric Current on the Friction and Wear Behavior of Carbon Nanotubes-Silver-Graphite Composite

Friction and wear behavior of nano hard particle composite coating on plastic injection moulds

Study on the Improving Friction and Wear Properties of Lubricating Oil with Nanoparticles

Friction and Wear Behaviours of Zirconia Toughened Mullite Composites

Friction and Wear Characteristics of Bearings under Water Lubrication

Study on Friction and Wear Performance of Mental Doped Diamond-like Carbon Film on Titanium Alloy Surface

Effects of Phase Structure on the Friction and Wear Properties of Electrodeposited Ni-Co Deposits

Effect of P-N Type Extreme Pressure and Anti-wear Additive on the Friction and Wear Behaviour of Aluminum-steel Sliding Pair

excellent anti-wear: a high temperature and high pressure to ensure adequate oil film strength, reduce friction and wear;

Friction and wear characteristics of rare earth-containing magnesium alloy

Friction and Wear Properties of PTFE Composites Reinforced with Nano Particle Kaolin

Study on Friction and Wear Behavior of Carbamoyl-containing Polysulfides in Rapeseed Oil

Dry Friction and Wear Properties of Silicon Carbide with Nickel and Titanium as Compositions

Effects of Silicon Oil Lubricant on Friction and Wear Properties of Mullite - based Ceramics

Friction and Wear Behavior of N-containing Thiophen Derivatives as Additives in Rapeseed Oil

Friction and Wear Property of TiN Ceramic Alloying Layer by Double Glow Discharge Plasma Process

Friction and Wear Mechanisms and Demand for Resin-bonded Automotive Brake Materials

Sliding friction and wear of ceramics against graphitized cast irons under emulsion

Study on Interfacial Potential Barrier Theory of Friction and Wear

Advances in Friction and wear studies of High Performance ceramics for Hip Joint Prostheses

Friction and Wear Behavior of Aluminum Alloys Ion-implanted with Nitrogen, Oxygen and Metal

Friction and Wear Behaviors of Oils with Nano-Calcium Carbonate or Liquid Crystal Additives

Effects of Adhesive Added Rare Earths on Friction and Wear Properties of Friction Materials

Study on Friction and Wear Behavior of Polyetherimide Filled with Graphite

Effects of Solid Lubricants on the Friction and Wear Property of Half-Metal Friction Materials

Effects of lubricating-oil additive on the friction and wear properties of PTFE composites

Effect of Particles Matching on the Friction and Wear Behavior of Reaction- Bonded Silicon Carbide

Effects of Matrix Modification on Friction and Wear of Resin Matrix Friction Materials

Real-time Measurement for Wear and Friction Coefficient in Friction and Wear Test with Current

Research of the Effect of Microstructure on the Friction and Wear Property of Structural Ceramics

Friction and Wear Properties of Fe-based Sintered Materials After Laser Quenching

Friction and Wear Behaviors of PTFE-based Composites Filled with Polymers

Friction and Wear Behavior of Several Commercial Dental Composites

Friction and Wear Properties of Elastic-metallic-plastic Composite

Friction and Wear Behavior of Co-Polymerized Polyimide Films in Dry Sliding Against Steel

Friction and wear evaluation of silicon nitride on elevated temperature

Test Machine of Friction and Wear and its Automatic Control

Application of AC Servo Motor in Reciprocating Friction and Wear Testing Machine

Study on Friction and Wear Properties of Wheel Steel under Rolling-Sliding Condition

Dry Friction and Wear Properties of PTFE Composite Filled with Carbon Nano Tubes

Effect of Particles Sizes on the Friction and Wear Behavior of Reaction- Bonded Silicon Carbide

Ion Sulphuration An Effective Technique for Reducing Friction and Wear

Effect of Rare Earths Modification of Glass Fiber on Friction and Wear Properties of PTFE Composite

Influence of Carbon Amount and Sulphidation on the Friction and Wear of PM Iron-base Materials

Study on Friction and Wear Properties of Fiber Reinforced Nylon Composites

Friction and wear behavior of Ni-based carbon nanotubes composite coatings

Friction and Wear Behavior of Self-lubricating Ceramic Composite

Design of Automatic Measuring and Testing System for End-face Friction and Wear Tester

The Actuality and Development of Friction and Wear Performance Test of Automobile Friction Material

The Research Progress of Friction and Wear Surface Self-repairing of Machine Parts

Effect of Cerium Oxide on the Microstructure and Friction and Wear Behavior of Enamel Coating

Investigation of Dry Friction and Wear Properties of MC Nylon Composites Modified by Polyazomethines

Research on friction and wear of tribological pairs of wheel of electric loco motive-rail

The Friction and Wear Behaviors of Carbon FiberReinforced Antifriction Material

On the Friction and Wear Characteristic of Water Lubricated Compound Rubber Bearings

Research on Friction and Wear Performances of Joints by TIG and Friction Stir Welding

Friction and Wear Properties of Ti-permeated Layer on Copper by Double Glow Discharge

Effects of Heat Treatment on Friction and Wear Properties of Aluminium-Bronze

Friction and Wear Behavior of Nanocrystalline Cu-Zn Layer on Copper Substrate

Friction and Wear Behavior of Fe-based Sintered Lining Material for Highway Train

Friction and Wear Characteristics of Plasma-sprayed WC Coatings

An On-chip Testing Method for Measurements of Friction and Wear in Moveable MEMS Devices

Friction and Wear Behavior of Glass Fiber Reinforced MC-nylon Composites

Friction and Wear Behavior of Human Enamel Eroded with Different Organic Acids

Friction and Wear Behavior of Bionic Non-Smooth Surfaces at High Temperature

Friction and Wear Characteristics of Zr-based Bulk Metallic Glasses

A Study on the Friction and Wear Properties of Ceramic-Enhanced Cu-Based Composites

Effect of Antifriction on Friction and Wear Properties of Resin-based Composite

Study on Friction and Wear of Steel-copper Couples in Carbon Dioxide Atmosphere

Friction and Wear Performance on Fretting Wear of Steel Wires in Hoisting Ropes

Friction and wear behavior of bionic coupling brake drum processed by laser

Experimental Study on the Friction and Wear Behavior of Sulphurized 45 Steel under Dry Friction Condition

Effect of Counterparts on the Friction and Wear Behavior of Single Crystal Silicon

Friction and Wear Behavior of Electroless Wear-Resistant and Self-Lubricating Ni-P Composite Coatings

Research status on heat dynamics of friction and wear for disc-pad braking systems

Effect of Carbon Fiber on the Friction and Wear Behavior of Paper-Based Friction Material

Study on the Friction and Wear Characteristic of Water Lubricated Rubber Bearings

Research on the Effect of Exterior Factors on the Friction and Wear Properties of Engineering Ceramics

Reduce friction and wear between shaft and supporting housing

Friction and Wear Behavior of PTFE-based Composites under Dry Sliding and in Liquid Nitrogen

Research on Friction and Wear Properties of Joint by Friction Stir Welding

Effect of Surface Treatment on Friction and Wear Behavior of Dental Porcelain

Study on Friction and Wear Properties of Plasma Nitriding 45# Steel under Different Lubrication

Study on Friction and Wear Behaviour of Mg-PSZ Ceramics at Different Environmental Temperatures

Friction and Wear Behavior of the Metals by Alfalfa Powder

Friction and Wear Properties of Self-mated Hot-pressed Boron Carbide Pair

Research on Friction and Wear Properties of Ultrasonic Motor

Friction and Wear Behaviors of Carbon-Copper Composites

Synthesis and Behavior of Friction and Wear of N-oleoylglutamic Acid as Water-based Lubricant Additive

Friction and Wear Behaviors of Greases for Low Noise Application

Study on Rolling Friction and Wear Characteristic of Wheel Steel

The in-situ friction and wear of hot-pressed polycrystalline SiC ceramic

The Subject of Friction and Wear in the Machine Design

Test Method for Measuring Friction and Wear Properties of EP Lubricating Oils Using the SRV Test Machine

Friction and wear of ceramics against gray cast iron in distilled water

Study on Friction and Wear of Steel-copper Couples in Oxygen Atmosphere

Investigation on friction and wear of finishing roll of hot rolling

Study on Friction and Wear Property of Water Lubricated Plastic Alloy Bearings

Effect of Co Ion Implantation on Friction and Wear Behavior of Stainless Steel

Development of Electro-Contact Sliding Friction and Wear Testing Machine

Friction and Wear Analysis of Self-lubrication Piston Ring

Effect of Rotating Speed on the Friction and Wear Behaviors of Glass-Ceramics

Friction and Wear Behavior of Titanium Carbide Thin Film Prepared on Bearing Steel Surface by PIIID

Friction and Wear Behavior of Double Glow Plasma No-Hydrogen Carburized Layer on Titanium Alloy

Effect of Solid Lubricator on Friction and Wear Property of Aramid Fiber Reinforced Nylon 66 Composites

Analyzing of Friction and Wear of Twin-piece Vane Compressors

Design of Data Processing System for Friction and Wear Tester

Friction and Wear Behavior of Ni-P-Carbon Nanotubes Electroless Composite Coating

Study on development of ceramics worm wheel and friction and wear mechanisms of material

A Study on Friction and Wear of Aluminium Bronzes in Different Media

Effects of Oil Additives on Friction and Wear Properties of MC Nylon

Experiment Research on Friction and Wear of Bionics Nonsmooth Structure

Study on Friction and Wear Properties of PTFE Composites

Studies of Vibration of Rubber during Friction and Wear

Research on Friction and Wear Behaviour of Chilled Iron

The Implement of Test System for New Type Friction and Wear Tester

Effect of Porous on the Friction and Wear of Zirconia Matrix Ceramics

On the Friction and Wear of Short Glass Fiber Reinforced Nylon

Investigation of Friction and Wear Properties of Thrust Sphere in ESPCP System

On Friction and Wear Behavior of Fe-based Bulk Amorphous Alloy

Online Testing System for Friction and Wear Tester

Friction and Wear Behavior of Welded Zone of Zinc-Based Alloy

The Effect of Rare Earth Compounds on the Friction and Wear Properties of PM Ni-based Alloy

Test method for friction and wear of plastics by sliding

Design of friction-and-wear test machine for oil well pumps

Friction and Wear Behavior of Flame-Sprayed Nylon1010 Coating

Research on Friction and Wear Properties of USM

Friction and Wear Behaviors of ZrN Coated Tool

The Design of Friction and Wear Tester for Nylon Bearing Based on Virtual Instrument

Studies of Friction and Wear of NBR under Wet Coal

Friction and Wear of Polymer Film

Study on the Friction and Wear Behavior of HVAF Coatings