| 单词 | depth of cut |
| 释义 |
例句释义: 切削深度,切土深度,掏槽深度,挖掘深度,切齿深度,切削量,刀口深度 1. The results showed that: the depth of cut had the main influence on cutting force followed by feed rate and cutting speed in turn. 研究结果表明：切削用量中背吃刀量对主切削力的影响最大，进给量次之，切削速度对主切削力的影响最小。 lib.cqvip.com 2. The cutting operation is performed at a certain desired peripheral speed of the workpiece, feed rate, and depth of cut. 切割手术是表现在某一个理想的外设速度的工件，进给速度，切削深度。 zhidao.baidu.com 3. This particular model predicts the depth of cut achievable with any given set of process parameters. 这个模糊控制模型可以预测在任何给定一组加工参数时，可获得的切割深度。 dictsearch.appspot.com 4. Any desired depth of cut can be obtained by the cross feed of the grinding wheel. 通过砂轮的横向进给能得到任意所需的切削深度。 www.mapeng.net 5. During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest. 在端面车削操作中，进给由横向滑板提供，而切削深度则通过大拖板或复式刀架控制。 www.mapeng.net 6. The results have indicated that the strength of AE increases slightly under super high wheel speed and large depth of cut. 结果表明，即使在砂轮超高速和大切深下，声发射增加仍较小。 www.ceps.com.tw 7. The depth of cut is adjusted by the cross feed of the grinding wheel into the workpiece. 切削深度通过改变砂轮对工件的横向进给来进行调整。 www.mapeng.net 8. Depth of cut, d, is the normal distance between the unmachined surface and the machined surface. 切削深度d是未加工面与已加工面之间的垂直距离。 www.mapeng.net 9. Tool cutter knife makes a sudden increase in the depth of cut, causing fracture tool and workpiece scrapped, and even caused the accident. 刀架落刀使得刀具突然增加了切削深度，造成刀具断裂、工件报废，甚至引起事故。 wenwen.soso.com 10. In this paper, effects of depth of cut and feedrate on mechanical properties of metallic fiber are investigated by spinning bit. 研究了用自旋转车刀加工金属纤维时，切削深度和进给量对纤维力学性能的影响。 www.chemyq.com 1. Dry and wet masonry blades provide a consistent depth of cut with less dust than abrasives. 干湿砖石刀片提供少于磨料粉尘削减一致的深度。 www.cfli.cn 2. It can also be seen that the maximum depth of cut is achieved directly as the cutter engages with the workpiece. 还可以看到当刀具进入工件切削时直接达到最大切削深度。 www.mapeng.net 3. Impact cutting and cutting compared, not only can increase depth of cut, but can also reduce the large number of cutting force. 冲击切削与静压切削相比，不仅可以增大切削深度，而且可以大量降低切削力。 www.fabiao.net 4. They provide a constant depth of cut and fewer blade changes. 它们提供了切不断深入和减少叶片的变化。 www.cfli.cn 5. As we can see in that figure, the depth of cut (and consequently the load) gradually increases on the successively engaged cutting edges. 就像在此图中能看到的那样，切削深度（及作为结果的载荷）随着切削刃持续进入切削而逐渐增加。 www.mapeng.net |
| 随便看 |
英汉双解词典包含2704715条英汉词条，基本涵盖了全部常用单词的翻译及用法，是英语学习的有利工具。