clamp

Based on structural characteristics and forced conditions of steel cable, a new pair of steel cable clamps have been designed and made.

nails for blocking the books are installed at the bottom of the said board for placing books and two clamps are fixed on the top.

If the bars do not drop in easily the swivel clamps may not be aligned properly and need to be adjusted.

The company clamps down on workers' strike.

The new swing clamps maintain the total clamping force by a patented self-locking device if hydraulic pressure is cut off or drops.

And now, few sectors come with more danger signs than Chinese property, as Beijing clamps down on the market to curb soaring house prices.

To cover the business rules identified in the sections above, the controller component clamps together all of these components.

Install 6' crossbars between the front and rear clamps on both sides.

The mechanical contribution to this coupling is subject to the hysteresis, metallurgical instability, creep, and slippage at holding clamps.

Prior to welding these clamps to the frame, insure that they both are pointing straight forward and directly on top of each cross-member.

The failure of the universal grinder clamps was analyzed by the macroscopic methods, microscopic examination and hardness testing.

After the clamps are applied place in oven for a minimum of four hours at 150 to 180 degrees.

DO NOT ALLOW JUMPER CABLE CLAMPS TO TOUCH EACH OTHER WHEN CONNECTED TO A BOOSTER SOURCE.

In mechanics, the class of problems describes the deflection of a elastic beam fixed at left and clamped at right by sliding clamps.

Only the modern technology of clamps and sharp scissors permits the slithery tube to be dealt with at speed.

I mark a center line on the riser to help me line it up with the clamps.

She learns soon enough, the curly-haired creature who clamps me so, of my meeting with her: moist is her eye!

2-Pull the edge joint tight with clamps. Make sure that both boards are aligned correctly, so that the surface is flat.

These hinge clamps are designed for the direct connection to the machine hydraulics with a max.

Many threads appear to have been discontinued or deleted, as the government clamps down increasingly hard on all dissent.

The adapters enable probes with different diameters to be properly positoned in the wobbulator or spindle micrometer mounting clamps.

Internal line-up clamps are fitted with shoes or blocks that in operation are pushed outward against the inside of the pipe.

In this case the mounting clamps need to be relocated using the four mounting holes on the top of the instrument housing.

The left bottom clamps two cloudy trigrams to namely two positive trigrams to represent the fire, the winter, north, the wisdom.

Remove the buttons on the front clamps only.

Remove the wedges on the 6' (1. 83 m) anchoring side bars between the front and rear clamps and remove the bars.

You should not apply tremendous force with your clamps because this will drive too much glue from the joint.

The hook is combined with the hook. Two iron clamps and two hooks can be placed in the key ring for convenient and selective use.

She huddles against the seat. Clamps her hand over her mouth.

Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses.

Stainless steel precision casting parts. Clamps, sanitary hex union nuts, flanges valves and valves etc. Standard and non-standard products.

The clamps shape need as that of crucible, Avoiding the concertrate stress destruction the crucible.

the throttle valve usually two young Duan circular arcs clamps a banding arrow by a square in the central straight line expression.

Application fields: mobile phone casing, belt buckles, hinges, bathroom door clamps, drain strainers, shower heads.

The clamps (2) on the side surface (3) are used for clamping convex parts on the two side surfaces of a tape which thus can not fall out.

and an interlock for prevent the clamps from operating until the fuse holder is arranged.

EU clamps down on heavy metal cadmium in batteries .

Use clamps or substitute materials that are not approved by the regulator manufacturer.

Clip part of the plastic disc clamps expanding part of the metal disc so as to reduce noise generated by colliding turntable by metal disc.

If this coating is not removed, large blossoms of corrosion on the terminal clamps are the end result.

Every single anatomical structure is properly aligned and fixed with the help of wires, needles, clamps, and foam blocks.

and using these positioning clamps provided with the combining portions as positioning clamp bodies.

This article introduces a series of special clamps for machining pump body of a Shoot Liquid Pump.

If yo clip the two clamps together directly, they will not be properly short circuited together.

All of these fasteners stretch stretch when tightened, and the tensile load created in this way clamps the members together.

When the clamp apparatus clamps the marble slab for processing patterns, the slate seldom breaks and cracks, thereby promising high yield.

Transport the finished clamps to the next step .

securing the cable to the wall with plastic cable clamps every few feet.

MUFFLER: With the car cold, grasp the tailpipe and move it from side to side. Hear any rattles? Check for loose connections, rusted clamps.

As the key component of the heavy-duty manipulator, the clamps are optimized based on the optimization design technology.

Aerospace series - Cushion, rubber for clamps - Dimensions, masses.

There's also evidence that as China clamps down, production of the knock offs is shifting to India and Russia.

Tighten the clamps slowly to allow any excess glue to escape and leave the joint clamped until the glue sets.

Metallic hose clamps for general purpose. Band type, without screws, non re-usable. Specifications.

Remove the wedges from the bottom of the swivel clamps and the 6'4 " anchoring crossbar. "

Rail sections could be joined end-to-end using standard bolted dovetail clamps to form the required 9m runs on either side of the conveyor.

Be experienced in cold punching tooling design and improvement, be familiar with the design and process of worm clamps.

WOODWORKING MACHINES. NOMENCLATURE FOR FRAME CLAMPS.

AEROSPACE. OMEGA CLAMPS (SADDLE CLAMPS) FOR FLUID SYSTEMS. DIMENSIONS.

We used small atraumatic vascular clamps to control blood flow through the pulmonary and interlobar arteries.

Beefy , cast aluminum, top and bottom triple clamps help increase fork rigidity and reduce weight.

For one thing, an Israeli government could take weeks or more to emerge, and could then prove hobbled by religious and other clamps.

All splicing plates, tubing clamps and miscellaneous hardware shall be Type 316 stainless steel.

The cost of cables and clamps is lower than other power supply system.

The net assembly shall consist of the net, its suspension and the supporting posts, including the clamps attaching them to the table.

Clamps serve two purposes. They pull a joint together tightly and hold it in a fixed position while the glue sets.

so I then removed the lid from the clamps and filed the corners down (this only took about two strokes with the file). To make the inset.

Tanks for manufacturing of liquids and ointments not equipped with sanitary clamps.

Also a trace of ice ballast soil, spring clamps also chill, Poplar's branches still green shoots will emerge.

METAL-HOSE CLAMPS FOR GENERAL PURPOSES ; BAND TYPE, WITHOUT SCREWS, RE-USABLE, PIN OR AXLE CLAMPS.

This greatly facilitates system design by making clamps or snubbers obsolete.

An operator places a part into the fixture and uses the manual toggle clamps to secure the part.

Finally the switch at the electric box is disconnected , and the reed is removed from the reed clamps .

She clamps her ear to the door.

You shouldn't rely on clamps to pull bowed boards together because this places too much stress on the joint and eventually it will fail.

ROOFING ACCESSORIES. STAMPED SHEET OR STRIP METAL BOLT CLAMPS WITH INSERTED PIN.

They are available with different end fittings, including standard strap clips, card clamps, and key rings.

The theoretical results indicate that, a vertical laser field, formed by distributed Bragg reflector (DBR) mirrors, clamps gain.

The gate the gate clamps and the place spring with the stainless steel about is fixed.

when the glue is set , remove the pins or clamps , trim the bare ends of the feather and bind them with thread for extra safety.

Clamps a handful lemon, scatters the table salt in the tigers mouth, drinks the law with the most standard cowboy to toss down.

This kind of rotten performing skill clamps in the family war is really only then the share which submerges .

Battery terminals and cable clamps will also develop corrosion over time.

The floormen tighten the weight indicator diaphragm clamps back on the dead line.

The plastic is contained within this mold, whose halves are held shut by clamps, until it sets.

ROOFING ACCESSORIES. STRIP METAL BOLT CLAMPS WITH EXTENDED PIN.

ROOFING ACCESSORIES. STRIP METAL BOLT CLAMPS WITH INSERTED PIN.

CLOUD clamps on to the rooftops in October and stays until April.

The outer cover or pages are held in place against the base plate by clamps.

This time they fixed heavy metal clamps to both sides of the dish so that they would fasten the chains.

Thank you. It work perfectly! The clamps hold the string with no problems.

This time they fixed heavy metal clamps to both sides of the dish so that they would fasten the chains.

Use a wire brush to clean a heavy accumulation on the clamps.

Scaling the treated clamps and report it in the daily report .

But if the government clamps down hard on market making as well, that number jumps to 52%.

Our clamps and mounting systems are designed and manufactured by our ISO 9001 Certified HY-ROS division.

Above: Clamps keep the back firmly in place as the glue dries.

The present invention is a candlestick whose spring clamps candle.

SECURE WORK. Use clamps or a vise to hold work. It's safer than using your hand and it frees both hands to operate tool.

Two miniature P-clamps which are riveted to the disc, hold the rod in place.

Two miniature P-clamps which are riveted to the disc, hold the rod in place.

The steel pipes should be secured with clamps.

Good ability to design and change the production clamps.

A notebook cover with rings or clamps for holding sheets of paper.

This time they fixed heavy metal clamps to both sides of the dish so that they could fasten the chains.

Milk bread class ? The coherence jam or clamps the vegetables to eat together ?

Controlled bleeding by clamps and ligatures will lead to arteries defect.

DCN-DISCLM cable clamps for Discussion Unit secure loop-through cables to next unit.

Spot welding. Electrode back-ups and clamps.

Provide the treated clamps in the control room .

Provide the treated clamps in the control room .

With clamps as used in a laboratory you can easily hold all kinds of tools.

Appears temporary startled touches, this is the feeling stomach clamps is startled.

Secure all work with clamps or a vise, freeing both hands to operate tools.

transport and handling of liquid chemical products . roads tankers . 500 and 600 domcover . closing devices with clamps.

The price includes 4. 5 meters of tower piping, tower base, guy wires , steel rope clamps and other mounting hardware.

Clamps, bent wires, vise grips, and other devices can also help to support and guide the profile.

The sensor is easy to install with mounting options including M5 rod eye bearings and body clamps.

What the hell? Who took my clamps and the bandage scissors?

In this plan, you will remove the end fittings and just use hose clamps.

For the first time in years, the protests have been giving Syrians a chance to discuss the future outside the clamps of the Baath party.

The sensors have a robust stainless steel body and push rod, body mounting options include M5 male thread, M5 rod eye or body clamps.

Clamps in the shaft rear part.

A segmental arch bridge, which was built in AD 610 and still stands, made extensive use of iron clamps between the staves of the arches.

We want to buy Miter Saw Machine, Corner assembling Machine, Furniture Clamps. Clips, Clamps.

When this happens it's best to get clamps to stick the wires to the walls.

Most lost objects were sponges, but also included were metal clamps and electrodes.

In order to attach rails and construction parts to sleepers, ribbed plate pads and SKL 12 tie clamps shall be used.

OFTA clamps down on illegal external telecommunications services operations

The American meets patiently lines up the waiting service, does not have "clamps the wedge" custom;

Standard Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion

Customs clamps down on illicit photocopying

transporting the injection moulding parts to thermo printing stations, positioning and fixing the injection moulding parts by clamps;

Blood-vessel cuts made by laser beams do not need clamps or stitches

aerospace series - clamps , loop p type in corrosion resisting steel with rubber cushioning - dimensions and masses

Sheath-clamps for telecommunication cables; requirements, tests

Electrical earthing - Clamps for earthing and bonding - Specification

a handle capable of inserting use holder and jointing clamps so as to fix the contact member at right position;

Aerospace series - Clamps worm drive - Technical specification

The Design and Application of the Assembling Clamps in the Injecting On-line Pressure Seals

Aerospace series - Clamps, worm drive - Dimensions, masses

An Existence Theorem of Nonlinear Elastic Beam Equations Fixed at Left and Clamped at Right by Sliding Clamps

The upper end is gripped by clamps, the lower is connected by turnbuckle with safety lines

Suspension Clamps for Double-bundle Conductors (For Jumper Conductor)

Application of CAD technology for automobile welding pneumatic clamps

The butterfly valve clamps when the pipeline should pay attention continually relay even is whether reliable;

Specification for corrosion resisting worm drive clamps for aircraft

Power current and telecommunication overhead lines; wire rope clamps

Purchase equipment, tools, matrix and clamps, take charge of outsourcing;

Specification for hose clamps (worm drive type) for general purpose use (metric series)

Acid-resistant stoneware for chemical equipment; clamps for flange pipes

Clamps and connections for overhead power lines; requirements

arranging combining portions on the positioning clamps;

Quantitative Analysis on Frozen Cracks of Clamps for Crimp Connecting Device

Clamps for glass lined vessels - Part 1: Dimensions, assignment, determination of minimum quantity

Strain Clamps (Compression Type for Lightning Arrester Wire)

Design of Clamps to Machine Left and Right Ammunition Mechanisms for Special Product

PLC Controlling to Automatically Hydraulic Rail Clamps

Analysis for Clamps Application in Wheel Manufacturing

Clamps the weak soil layer the layered location to the incident P-SV wave response analysis

Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe

Tabular layout of article characteristics for clamping or spreading clips - Part 123: Profiled clamps

Electric railway vehicles; bow slipper holder for contact wire clamps

Tabular layout of article characteristics for clamping or spreading clips - Part 121: Surface clamps

Teaching, learning and training equipment; stand rods; bossheads, tripods and table clamps

Clamps directly to the microscope substage for stability

The structure and operation principle of quick-changed drill clamps

Specification for spot welding - Electrode back-ups and clamps

Construction Analysis of Plate Clamps of Modern Offset Presses

On first the three meals a day, the breakfast quite is simple, the bread clamps the ham, drinks tea, coffee or milk;

Research on the Sand Slurry Abrasion Tester with Vertical Multi-clamps

Specification for carbon steel worm drive clamps for aircraft

Clamps, Utility, Laboratory and Holders, Buret and Clamp

The Application on Clamps in Flexible Manufacturing Line

Hand-held current clamps for electrical measurement and test

This time they fixed heavy metal clamps to both sides of the dish

Drawing and Blanking Progressive Die for Earth Clamps

Attention to the Insulation Technique of Clamps during the Desiccation of Transformers

Hose clamps - Spring band clamp - Part 2: Technical delivery conditions

Development of new Coupling Clamps for aluminum alloy pipes

Effects of Polished Rod Clamps on Polished Rod Fatigue Life

Strain Clamps for Steel Wire (Compressed Type)

Strain Clamps for Insulated Cable(Wedge Type )

Parallel groove clamps specific form

Tabular layout of article characteristics - Part 44: Clamps

Surgical clamps or clips or forceps or accessories

Metal laboratory ware - Clamps

Fastening clamps - Part 3: Section clamps and flange dimensions

Wedge clamps for overhead equipment

Hose clamps - Spring band clamp - Part 3: System: Spring band clamp-hose-spigot

Work on Clamps of Electric Upset Forging Machine

Struck tools (such as chisels, clamps, etc. ) shall be maintained in good condition and shall be fit for purpose

Laundering clamps of optics spare parts

Strut Clamps-with Parallel Tapped Holes

Pipe clamps for shipboard use - Pipe holder

Fastening clamps with bracket - Part 1: Type A without insert, type B with insert

Fastening clamps with bracket - Part 2: Type C without insert, type D with insert

The design of milling clamps for non-return valves

Central distance of sample clamps

Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; Types D and E

Metal clamps hold lid securely in place;

Potatoes; Storage in the open (in clamps)

Stoppers and Clamps of Welding Jigs

Pipe clamps for shipboard use - Part 2: Inserts for pipe clamps

Fastening clamps with bracket - Part 3: Insert

A Series of Special Clamps Design of Body of Shoot Liquid Pump

Grasp rumen with towel clamps

Clamps for jigs and fixtures

Pipe clamps - Center fastening for 2 pipes

Flange Clamps Design On- line Sealing Based on VBA

Using the units in clamps,

Pipe clamps for shipboard use - Part 1: Pipe clamps for pipes DN 8 to DN 1400