corrosion rate

Corrosion rate of aluminum alloy half-immersed in electrolyte with time was similar with that of sample immersed entirely in electrolyte.

The results revealed that the corrosion rate of steel being used for pharmaceutical machine had been reduced in a very big degree.

Conversion of a metal surface to a less reactive state. A process to reduce corrosion rate of metal surfaces.

Due to this fact it was possible to conduct the corrosion rate measurements by means of GalvaPulse equipment.

At low and moderate temperatures, corrosion product films might be destroyed by liquid flow, inducing high corrosion rate.

At the same corrosion environment, the corrosion rate of naphthenic acid drops with the increase of its molecular weight.

RCPT and chloride ion diffusion test may be applied to assess the concrete durability besides rebar corrosion rate measurement.

In-situ measurement of corrosion rate of copper and soil physicochemical factors was carried out in Shenyang soil site.

The deposition rate, microhardness, corrosion rate of low temperature iron plating layer at different temperatures are investigated.

Corrosion rate of reinforce concrete periodically immersed in acid rain solution indoors was far beyond that in atmosphere outside.

The compactness and protective ability of the corrosion product films increased and corrosion rate decreased with temperature rising.

Analysis shows that these events constitute a significant fraction of the passive corrosion rate of titanium.

The method for predicting the soil corrosion rate of metal material has re occurrence, and can predict the soil corrosion of metal material.

With the temperature increased, corrosion rate became higher due to increase of film thickness and condensation rate.

According to the corrosion failure characteristics of buried oil pipeline, electrochemical corrosion rate of the flaw was derived.

The test results were been analyzed using various methods and mechanism of different factors with the corrosion rate was investigated.

The apparatus is used to measure the corrosion rate of mild steel in neutral medium with and without corrosion inhibitor.

Surface roughness has greater effect on the corrosion rate of NiTi shape memory alloy at the primal phase.

Finally the relationship between corrosion rate and shift in center wavelength was calibrated by experiment.

The new technology has advantages of fast polishing rate, low corrosion rate, less environmental pollution and low cost.

The corrosion rate and corrosion pitting depth of zinc in different humidity soils with SRB are larger than those in soils without SRB.

An empirical formula is given to modify the corrosion rate and get a satisfactory result.

The fundament of single pulse gslvanostatic polarization technique for corrosion rate measurement of medal are described.

Synthetic concrete pore solution chemistry and rebar corrosion rate in the presence of chlorides.

Hydrogen gas is evolved when a metal corrodes in acid and when the corrosion rate is relatively rapid.

The corrosion rate and degree is decreased with increased extrusion ratio and decreased chips size.

Corrosion film is the determinative factor for corrosion rate and corrosion pattern.

In the later stage, corrosion rate is slower and corrosion kinetics follows a linear law approximately.

In this example of swimming pool wall the conditions for performing corrosion rate measurements were not ideal.

The corrosion rate increased with the temperature increment of wet gas.

The results show that the corrosion rate of X80 pipeline steel is the largest when the soil moisture content is 20%.

In this case there is a rather good correlation between resistance, half-cell potential and corrosion rate mapping.

In simulated soil solution, electrochemical reactions are easiest to take place, so the corrosion rate is the highest.

The corrosion rate assesses grade to judge grading to judge a corrosion rate.

The results of dynamics affected by different concentration of HCO3- showed that corrosion rate was line with concentration of HCO3-.

The corrosion rate was measured using weight-loss test method.

corrosion rate is first decreased and then increased.

In addition, the corrosion rate in bending pipe will be high due to the erosion and corrosion.

It is important to predict the corrosion rate of pipeline for predicting the remaining life and the residual strength of pipeline.

corrosion rate than the TCI and DCI specimens without apatite.

The corrosion rate of Re-Ni-Cu alloy cast iron in hot concentrated alkaline solution was measured by the dynamic hydrometer method;

at the early corrosion stage, the corrosion rate is very high, with the time on the rate will drop obviously;

Research on the Correlation of Concrete Permeability with Steel Bar Corrosion Rate of Carbonated Concrete

Studies on the monitoring method of the corrosion rate of steel bar in existing concrete structures

Bridge reliability of concrete bridge including improved steel corrosion rate under chloride environment

Study of Corrosion Rate on Inner Wall of Acid Regenerating Tower at Position of Gas or Liquid Phase

Climate conditions influencing the corrosion rate of rebar in carbonated concrete

The influence of experiment condition on corrosion rate of rebars by linear polarization method

Calculation of Corrosion Rate of Passive Metals with Charge Curve Analysis Technique

Corrosion rate measurement and anticorrosion measures of carbon steel pipeline in central heating systems

Study on Random Fluctuation Characteristics for Corrosion Rate of Carbon Steel in Soils

A Model of Computing Corrosion Rate of Reinforcing Bar Following Spalling of Concrete Cover

Predict the Internal Corrosion Rate of Gas Pipeline with Artificial Neural Network

Current Situations of Researches on the Corrosion Rate of Reinforcing Bars in Concrete

The influence of impurity distribution to the corrosion rate of gadolinium in water

Experimental studies of transverse crack to the corrosion rate of rebar in concrete

Purifying column; Corrosion rate; Polypropylene;

Probabilistic Corrosion Rate Estimation for Longitudinal Members of Bulk Carriers on Active Service

Application of Statistics in Predicting Corrosion Rate of Water Injecting Pipeline

On-line monitoring of the foul thermal resistance and corrosion rate in cooling water systems

Relationship Between Corrosion Rate of Metal and Resistivity in Soil

Experimental studies to the corrosion-rate of rebar in concrete

Corrosion Rate and Morphology of Different Materials in Sulfer-Bearing Solution

Statistical analysis of corrosion rate for existing hydraulic steel gates

Experimental Evaluation of Computing Method of Instantaneous Corrosion Rate for 7075 Aluminum Alloy

Standard of test method for corrosion rate of buried steel

Research state on factor affecting rebar corrosion-rate in concrete

Change Characteristic and Mechanism of Rebar Corrosion Rate with Time in Concrete Under Constant Climate

Study on Correlation of Materials Corrosion Rate with Air Quality

Study on Correlation of Corrosion Rate with Air Quality for Materials

Modeling on Predicting Steel Corrosion Rate in Concrete

Predicting Corrosion Rate of Pipeline Based on Grey Combinatorial Model

Corrosion Rate Measuring Instrument Based on Linear Polarization Method

Effect of Temperature and Humidity on the Rebar Corrosion Rate

Is the corrosion rate is equal in the soft and hard water for steel