torque

Frequency of torque signal is consistent with that of force vibration. Amplitudes of radial pulsation signal increases as tapping continues.

it implies smooth operation, in which a maximum force component is available to produce a force or torque in an output member.

Prior to hydro test, check torque values again and bring them up to the torque value shown in the Bolting Specification table.

There are two factors that determine how much torque can be applied to the wheels: equipment and traction.

The spin angular momentum is now in this direction, so I'm going to give it a torque like so.

If I put it on this side, torque is now in this direction, spin angular momentum is in this direction.

How much does the contact patch direction deviate from that of the wheel, when a self aligning torque is present?

When designing valve systems, hydrodynamic torque must BE considered to help assure correct selection for the application.

Well, it is one of the important things of solid mechanics, which is the torque of a force divided by the moment of inertia.

When a torque is applied to a body, potential energy is imparted to the body, which accepts it in the form of kinetic energy.

When the speed servo system has a large torque reference, the output of its PI controller is often saturated.

Now I'm going to give it a spin in your direction and now again I'm going to torque like this.

Beyond this point, the engine torque decreases more rapidly with an increase of speed. This results in a decline of power output.

Like the ball occasionally moving up a step, the rotor is sometimes buffeted enough by other molecules to move against the gentle torque.

Having access to such a wide torque band eliminates the need for a second or third gear in the transmission.

The simulation results showed that this method restrained its torque fluctuate effectively, and reduced its operating noises obviously.

P. We are interested in obtaining the axial force F necessary to produce a certain torque T and pressure p .

Screwing torque of every tools used is well checked daily by shift and recorded properly, showing the specified limits and actual values.

I have tried to make games with Torque, but found I frequently had problems that there was no documentation for, and wound up blocked.

3 completely changed the metal seal valve easy to leak, torque, sealing surface corrosion of the shortcomings of impatience.

And then I'm going to sit on this stool and I'm going to torque exactly as you see on the picture on the right.

A third force is known as a (torsion) force, or a torque since it tends to twist an object.

The prototype was fabricated and experiments proved that this method is useful and also keeps a high torque for a large stepped angle.

Do not be alarmed by a difference between the dynamic torque and a statiC recheck. This is a normal condition.

The calculation results show that this project can reduce the minimum adsorption force, driving torque and resist overturning.

To ensure a secure connection, many types of threaded joints are made up to specific torque requirements in oil- and gas-well applications.

If I torque the other way around, then the torque, of course, will make it flip like this.

I hold it in my hand and I'm going to torque it like this so that the torque factor is in your direction.

Results: There was no significant difference of screw insertion torque and the pull-out strength between each group.

Shaft: The pump shaft is made of a high grade stainless steel, ground and polished, and is of a large diameter designed for high torque.

Maximal voluntary contraction and peak torque increased significantly in the T group but did not change in the P group.

So, even though a car may be able to produce more torque, there needs to be enough traction to transmit that torque to the ground.

The hydraulic damper can close the door automatically by means of torque energy stored when the door is opened.

However, the torque ripple at the 79% pole-arc to pole-pitch ratio is not minimal although the THD of back EMF is minimal at this point.

CDI has long been a major innovator and leader in electronic torque measurement and torque calibration equipment.

A sensor and a transmitter can be installed in the torsion seat, and the torque of the utility model can be measured by a receiver.

Besides, a speed controller with load torque feedforward strategy is adopted, which makes the system capable of rejecting load disturbances.

It is a permanent magnetic synchronous coupling able to transmit torque through magnetic forces between the internal and external rotor.

Finally a simulation calculation on the torque transmission characteristics of clutch during vehicle starting is conducted for a real car.

Finally, the MATLAB was used to simulate the load torque observer, and the observer is proved to be valid by the simulation result.

The difference in "feel" between the Multimatic and a conventional automatic transmission using a torque converter is minimal.

The simulation results showed that this system could give good torque, speed and good resistance at very low speed.

According to the torque value, calculating that of drill string downhole , and checking the safety of the drill string.

Used for testing Children electromotion toy motor and reducer, drive system torque, voltage and current changes strength in using.

Therefore, it can think of that rotation speed has no effect on leakage and torque in the calculation.

Butterfly valves, sizes 8 "and larger, when used on liquids, show a marked increase in dynamic torque which tends to close the valve. "

The company claims no typical supercharger lag with these units, saying that throttle response is immediate, as is the increase in torque.

The total torque requirement is calculated by a nonlinear auto-regression with exogenous input (NARX) dynamic neural network model.

This mode, in which MFI can modulate the flapping parameters to adjust the force and torque, offers a means of control of the MFI.

The cogging torque was the main factor that causes a PM stepping motor to be vibrated, noisy and even influences its safe operation.

This machine may be of interest where the cost of winding connections is important, but again high torque ripple may be detrimental.

So it is not possible for the wheel to keep rotating, and as a result of this torque that I give it, that it simply goes around.

Tightening torque is one of the main factors that affect the connection quality in threaded connections.

An interpolation algorithm fully making use of the characteristic of CPLD high frequency is designed used for the grating torque sensor.

The loading device applies torque loading to the rotating shaft, and a gravity bending moment is loaded by the small pulleys.

Note: You may increase the torque on the rubber sleeve up to two times the specified value without causing sleeve or flange damage.

With changing the edge plate, the torque anchor can be reused for multiple times, so the consumption cost of the tool can be reduced.

A torque of this kind, arising from a pair of equal and opposite forces, is sometimes called a couple.

The simulation result shows that the system consisting of the estimator boasts a fast response, small torque ripple and good robustness.

The braking device applies a braking torque to the crankshaft when at least one cylinder is deactivated.

The system monitors and records the spindle speed, torque, temperature, pressure and leak rate of the seals under test.

The only load to be applied to the torsion bar is the torque M at its ends.

The finite element analysis was also used to extract the torque and iron losses, also obtained the Electric machinery efficiency.

The internal characteristics of the torque converter were calculated from its tested external characteristics by the method of proration.

Hydraulic torque converter of the blade design is to determine and influence important parameters of converter performance.

And as long as I torque it like this, that spin angular momentum wants to go around in the horizontal plane.

An adjustable mounting plate grips the base of a sample, presenting it for application of clockwise or counter-clockwise torque by hand.

The spiral shape of the fracture surface indicates that the shaft had been overloaded by a high torque prior to breaking.

The utility model can transfer torque and empty rotation in two ways to solve the old problem of low work efficiency of a tap spanner.

This paper stresses that the main motor must match system fly wheel torque, and there must be proper speed drop in shearing.

This will hold the regular nut allowing you to torque the first plate into position, and will later be used to adjust the turn tension.

Once stopped, the stepper motor resists dynamic movement up to the value of the holding torque.

Seating forces are generated by the torque during closing uniformly around the entire circumference.

This paper describes the design concept of a new robot based on the direct- drive method using rare -earth DC torque motor .

The various gears in the transmission and differential multiply the torque and spit it up between the wheels.

METAL CONSTRUCTION. JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING. CALIBRATION OF TORQUE WRENCHES.

Slewing ring bearing( slewing bearing), is a bearing that able to bear axial load, radial load and overturning torque.

Since the motor currents are effectively sinusoidal and form a balanced 2-phase system, the electromagnetic torque is nearly constant.

Link two coaxial shafts and transmit the torque and motion between them.

In contrast, torque-feedback response for a two-axis gyro is decidedly affected by shutting off the spin motor.

If the bolts have loosened, increase the torque to the torque value shown in the Bolting Specification table.

This causes the applied force to act as a torque, which therefore gives the ball a spin.

A nearly flat torque curve begins at a low 1, 400 rpm, meaning turbo lag is all-but-quelled.

Let the fusible plug of sealing ring install to Fixture , screw it in accordance with the provided torque of the manual.

For absolutely leak-tight joints, the peaks must be deformed with torque until a large portion of mating surfaces is in microscopic contact.

When wheels are being driven directly by electric motors, different levels of torque can be applied to improve stability on corners.

Safe load capacity, strengths and application limits of accessories and components of the EZY-torque must be carefully verified.

Roller drive machinery is low drive launched one of the machinery, providing a steady rotation, no gap, excellent torque.

The test equipment consists of a DC load machine coupled to the test motor by a torque transducer mounted in a Cardenshaft.

By using torque vectoring, it will be capable of an even more responsive version of the brand's famous "quattro" four-wheel drive system.

but, he hit the ice well behind the puck and a little bit too much torque on the stick.

It is a layered control system consisting of a 3 DOF vehicle model, a yaw moment determining layer and a torque distribution layer.

Automotive torque converter was designed with a flat profile for the purpose of achieving a smaller axial size and weight saving.

Output torque of the actuator must meet or exceed the operating torque requirements of the specific valve to be actuated.

We build a cluster where nodes are provisioned with xCAT and on which batch jobs are managed and executed by TORQUE.

Work mechanism of a partially filled torque converter is presented and method to realize partially filled converter is suggested.

Steady-state conditions, the work of the state of the engine with the engine speed and torque-related.

The simulation results show that the system can depress the torque ripple effectively and improve the startup response.

Mating connectors must be clean, must meet connector type interface, and must be tightened to the appropriate torque specification.

The tools you use for the cylinder heads should be hydraulic and for the main bearings, torque spanner.

The phase difference is proportional to the applied torque by means of the torsion spring.

The rheological properties of soy proteins were investigated respectively using a capillary rheometry and a Brabender torque rheometry.

Direct torque control has excellent dynamic performance, but it has large ripple on stator flux and electromagnetic torque.

The running performance brims with thrust that overpowers all others with its unprecedented torque.

However, if the bridge contains any curves, the beams become subject to twisting forces, also known as torque.

This difference in voltage applied to the motors appears as a difference in torque characteristics at high speeds.

A general form of the torque model for a VRSM is derived using the principle of energy conversion.

FWD is standard while Mazda's Active Torque All-Wheel Drive is to be sold as an option.

Conveying systems run more reliably and efficiently : as a torque brace , compact force transducer continuously monitors the drive forces .

Cogging torque is one of the main concerns of permanent magnet motor.

I'm going to torque by pushing my hand towards you, and the wheel does something completely unexpected.

The center swing is the only moving parts in this power unit, and it plays the role of conversion of energy and the transmission of torque.

The utility model belongs to the torque testing device of the screw pump well on an oilfield pump recovery wellhead.

from its unique design , the honda multimatic is superior to conventional automatic transmissions using torque converters.

Third, the eccentric peak torque changed not significantly with the increasing of a given velocity.

The shading loop delays the build up of a magnetic field in that portion of the pole and gives the motor some starting torque.

Finally, the torsion vibration nature frequency and torque amplitude factor of a rolling mill are calculated by using finite element method.

c. If the rig is equipped with a top drive, stab in and make up the top drive to the required torque.

Sufficient contact pressure generated by the torque is essential. A small increase in contact pressure produces a rapid decrease in leakage.

More effective way is to scale through the use of the torque wrench has a pilot to feel the appropriate torque value.

A three-dimensional design method for the hydraulic torque converter blades were proposed and its basic design flow was provided.

The torque ancd rotational speed of a motor are the most important two parameters, their measurement must be accurate.

If there is a net torque, there will be an angular acceleration, and that's what you see.

So, the study of torque converter, discussion of control means, and enhancement of energy-saving speed regulation are very important.

The cogging torque can be reduced efficiently by suitable selection of the relative angle between dual stators .

On a standard differential, equal torque is transmitted to the rear wheels if the loads on the two wheels are the same.

An additional torque compensation algorithm is proposed to improve the shape of the strip to be coiled.

CVT gets the engine to the peak torque and maintains it over a wide range of vehicle speeds by varying the transmission.

Make sure that any outlet seal is properly tightened to the same torque requirement as the CGA connection for the particular valve outlet.

The V8 is mated to a revised ZF HP28 6-speed automatic transmission, which has been optimized to focus on torque low down in the rev range.

The research contents of this paper supply theoretical basis to the design of brushless DC motor of high performances and low torque ripple.

Displacement is changed accordingly changes of the size of the output torque, which can meet the requirement of load variation outside.

The load rate, load fluctuation rate and actual distribution of the torque moments of partial spindle of the mill have been analyzed.

Dynamics and kinematics simulation analysis were processed, and drive torque for this system was also calculated.

This article deals with torque allocation for redundant flywheel configurations in a spacecraft attitude control system.

An extreme example would be a tyre so sticky that it requires an excess of torque to get the car moving.

Monitoring tightening bolts questions you will determine whether the technicians of the torque wrench required courses.

One of the disadvantages of conventional direct torque control is high torque ripple.

With so much torque on tap, around-town commuting requires only an occasional move of the lever.

Tightening with the correct torque minimizes the risk of the implant screw working loose and improves precision during bridge fabrication.

Polyvinyl Chloride(PVC); Factorial Experimental Design; Torque Rheometer; Differential Scanning Calorimeter(DSC); Heat of Fusion.

The torque converter leaves can be divided into two categories: developable surface leaves and leaves an exhibition surface.

If the correct torque has not yet been obtained, the hydraulic cylinder must be pushed in (down) and step repeated.

If you use an air gun, you should use the torque wrench to check the clutch air on different settings.

These advantages make Synchron Motors ideally suited for a broad range of speeds with light to moderate torque loads.

The torque relative to point P is now very similar to what we had with a spring.

The state observer observes the precise load torque, rotor position and speed with only a low accuracy position sensor.

The fuzzy controllers were used to replace PID torque adjustor and PID flux adjustor of VVVF vector control system.

The compressed air powered wrench is capable of providing revert-torque to retrievable bolt end and sustain drag force.

TORQUE is a workload and resource-management system that manages batch jobs and compute nodes and schedules the execution of those jobs.

The new approach achieved inverter switches duty ratio control and made torque ripple minimum.

As a result, it is possible to prevent and protect the damage or fold of the honing tool (1) due to the excessive torque load.

Valve running torque can be calculated utilizing the above formula substituting running thrust for seating thrust.

The rules for the fixed engine speed with constant engine speed between torque transfer of the clutch and throttle angle were established.

The torque in this case would be out of the blackboard.

They consistently meet the demand for high torque , even in applications where the valve has been closed for an extended period.

It has a large one-piece stem that requires at least 35 foot-pounds of torque to close.

The direct torque control is capable to regulate the torque for it has torque feedback loop.

The above work and results have proved that torsional vibration response can be calculated with the transfer function and excitation torque.

Results show that two-phase SR motor can be designed to produce continuous torque characteristic in wide speed range.

But VVVF can only control the air-gap flux and cannot adjust the torque.

A new method of calculating the slopes of the rose and decline of the torque was proposed in this paper, the duty ratio can be calculated.

The torque figure of this engine in two-range governor mode met the dynamic demand of vehicle.

The HiPerStrut front suspension keeps torque-steer down and pushes the load back to maintain cornering grip in both wet and dry conditions.

Two run modes of reaction wheel were analyzed. It was indicated that torque mode had control convenience, high precision etc advantages.

The system instantly detects tire slip and smoothly distributes engine torque to tires with traction.

Result: Pain score was negatively and linearly correlated with the torque acceleration energy of extensors at a moderate degree.

ENABLE , DIRECTION and BRAKE inputs can be used to control the motor , speed, position and torque .

The waveforms of no-load electromotive force(EMF) and output torque are calculated as well.

Aimed at the unreasoning practice of the tightening torque by manual when screwing on oil pump, a torque measure system is developed.

The latter is designed by sliding mode control under constraints of control torque saturation and improves robustness of the control system.

Usually a bellows will buckle only under a very small torsion angle, and thus its utilities on torque transmitting are limited.

The basic idea is to adjust the flux reference on the basis of the torque error, thus determining a spontaneous flux weakening.

Stepped magnet configuration with approximate skew strategy is then applied to reduce the cogging torque and start wind speed.

The torque that needs to be applied for this joint to break.

Step skewing of rotor magnets is an efficient manner for reducing harmonics and minimizing cogging torque and torque ripple.

Validity of the theory model is verified by experiments for predicting the drawbar force, steering torque and turning resistance torque.

This method effectively eliminates the influence of the rotational speed to measure the torque, improves the precision of measuring.

In the manufacturing and assembly world, tightening, controlling, or measuring torque fasteners is imperative for production efficiency.

If the user utilizes procedures for the control of test devices, torque tools shall be included in these procedures.

Calculation formulations of corresponding dynamic torque measurement for different working states are presented.

Hasp using interlocking structure, flexibility, low rate of leakage, can withstand a certain torque.

In this paper, the cause of the doubly salient permanent magnet motor's torque ripples are analyzed and researched.

Lower operating torque due to non-rotating stem. Torque arm prevents rotation, indicates position and actuates limit switches.

All parameters including load torque, inertia and motor parameters are uncertain and acceleration is not measurable.

Second, the electric submersible pump connected to the pipe thread pretightening force enough (or not pre-torque).

a light disk suspended from a quartz thread; when exposed to a progressive sound wave its torque can measure velocity.

Electromagnetic clutch work, Lord, from department must exist a certain rotation difference only torque transmission.

The six bits of control allow maximum flexibility in torque control for a variety of step methods, from microstepping to full step drive.

The Various things accounting for unstable locking torque of the self-locking nuts used the X mode series aircraft is analyzed.

Considering the uncertainty of rotor resistance and load torque, adjusted parameters corresponding to uncertain ones were introduced.

And 10 percent less fuel consumption in comparison with a conventional automatic transmission with torque conversion.

Said invention is superior to the chain transmission in transmission torque, transmission ratio and transmission efficiency.

Upon the driller's instruction, the floormen tighten and torque the nuts on the dead line anchor clamp with the socket torque wrench.

Measurement of torque, rotational speed can be displayed, rotor model, and the results calculated viscosity.

The relationship between the dynamic tapping torque and the tap wear is studied through the experiments.

Beta System Utilization ? Connector Identification Index ? Connector Mate? Assembly Vise ? Torque Tools.

Both the experiment and the simulation results show that the proposed method for the torque converter design is reasonable and accurate.

The milling torque is an important mechanical characteristic of the milling process.

do not continue pulling on the wrench after pre-set torque has been reached and the wrench has been released.

Testing the torque of screw to confirm if it meets the specifications.

Here, however, the torque will never stop because this Mg will always be there, and I will show that to you shortly.

hydraulic transmission is composed of single stage, three phase, four wheels hydraulic torque converter and dynamic switch transmission.

By modifying the parameters of the oscillatory torque, the robot can achieve stable transition between walking patterns.

Final torque required to pull up joint may vary greatly due to effects of temperature , corrosion, lubrication and thread finish .

With close-loop adjusting ignition advance angle controlling the torque fluctuating, it realized idle speed control stabilization of engine.

A work bench improvement plan is proposed from the aspect of system rotational speed and torque sensitivity of the differential gear train.

automotive steering where engineer power amplifies the torque applied to the steering wheel .

A new speed regulator is designed to ensure the system working with the maximal torque in the transient state.

Cogging torque is one of the most important parameters of PM motors, which causes torque ripple, vibration and acoustic noise.

The torque coefficient and anti slide coefficient is important evaluation parameter of the performance class of high strength bolt.

The simulation results show the good performance for the system in torque, speed and robustness.

The compressive load and torque were transferred effectively. The central line of the force and torque. . .

After the connection has been tighten to proper torque, the Floormen remove the rig tongs and tie them safely out of the way.

Electric nut runner: used to tight large quantity of small bolts with presetting torque.

By measuring and analyzing the frequency of the noise signal, the actions of the torque ripple on the vibration and noise were determined.

Limit switches can easily be attached to the yoke of the valve . The torque arm will actuate the switches in open and closed positions .

The rear axle delivers an equal amount of torque to Both axle shafts through a differential.

Also the radial flow velocity torque distribution trend is expounded at the two conditions of free overflow and normal operation.

velocity vector of advanced control technology, electrical better torque characteristics.

Positive torque is only produced at angles when the inductance gradient is positive.

Torque signals collected contain adequate engineering information, helping driller monitor drilling conditions and detect danger in time.

Torque is applied at the edge of the optical cell to generate flexible deformation offset the gravity deformation.

Transverse flux permanent propulsive magnetic (TFPPM) motor has low speed, high torque density and is widely researched as propulsive motor.

Under the theoretical research of direct torque control system on electrically excited synchronous motor, simulations have been done.

For unique service conditions, different torque springs as well as other spring materials are available.

Like all engines, internal-combustion power plants run most efficiently in a narrow range of torque and speeds.

Simultaneously crosswise quite direct torque control and vector control similarities and differences.

utilizing method of variable exchange to confirm the torque variable is the cause of losing the Cointegration relation.

When the load torque changes, more power can be absorbed through another electrical port from the DC source to enhance the output torque.

Cured adhesive offers excellent cohesive strength, pull-out strength, torque and fatigue resistance under constant flexing.

Conclusions and advices are given in the last chapter. The appendix lists shearing torque calculation programs compiled with C .

The topic introduces the structure characteristics, characteristic parameters and working principles of the field bus torque sensor ZRN503.

The motion of the torque-free gyrostat initially at rest is a permanent rotation about a certain axis.

Make further finer adjustments as necessary to achieve the required torque setting.

But I can put a torque on it by simply putting some weights on the axis.

Then the dynamic response of system pressure, inlet flow of motor and motor torque is obtained.

Diesel engines also remain torque and eminently drivable under a wide range of real-world conditions.

Moreover, the rule of weight coefficient selecting was deduced on the basis of the difference between rated torque and real value.

During angular acceleration of the shaft the stator coupling must absorb only that torque resulting from friction in the bearing.

The gear section is behind the torque converter. This has gears that change the gear rations for torque multiplication and gear reduction.

Angular momentum goes like this, torque is like this.

A method is brought forward by which the fluctuation in zero and in sensitivity of output of the magnetoelastic torque sensor can be made.

Simulation studies show that the direct torque control scheme can effectively inhibit the brushless DC motor torque ripple.

The paper checks if the output torque of the single motor can meet the requirement of recoiling tension in this working condition.

Drawing from the induction motor direct torque control, DTC used in SRM is researched in this dissertation.

The result shows that torque, fatigue crack and material are the main reasons for the breakage.

Afterward, on the basis of the electromagnetic field theories, it calculates this brake's braking torque by analytical law.

The kinematics analysis makes the calculation of falling down torque easier, and is helpful for robot's control.

The drive torque (M) on the drive (6) is set by means of a predeterminable drive test sequence.