tensile strength

Easy-to-handle due to its great tensile strength, good flexibility.

Tensile strength and impact strength of the nano composites increased, while elongation at break decreased, compared with that of pure PPC.

Manganese is often added to steel to increase its tensile strength.

He was young, tall, thin, rugged, cool but not cold spiritually, and with a will and a determination of the tensile strength of steel.

Properties: high tensile strength, alkali resistance, good structure stabilization and strong and easy to apply.

Given the surface variations and tensile strength. Short answer, man. Eight feet, give or take a centimeter.

tensile tests show a marked increase in tensile strength, elongation at break did not change significantly.

Tensile strength of fabrics is higher than any other commercially available fiber except for sapphire whiskers and graphite in whisker form.

to be a little while for tensile strength of the strong films and the tension can be.

After deep drawing, such a structure gives very high tensile strength with satisfactory numbers of bending and twisting for wire for rope.

Improved tensile strength and elongation of ethylene propylene diene monomer (EPDM) compounds used for wire and cable.

The tensile strength, heat resistance and processability of the system decrease slightly with the increase of superfine wollastonite amount.

Improving tensile strength is one of a critical target for carbon fibre researching.

The yield strength, tensile strength and impact toughness of the material after iron plated do not obviously reduce.

The fatigue life of the coiled tubing also increases with the improvement of its tensile strength.

Concrete is one of the brittle materials, which has low tensile strength, poor toughness and poor impact resistance.

FEM NTA coupling model is set up for simulation of mining conditions at great mining height with an overlying rocks of low tensile strength.

Used for measure tensile strength and breaking elongation of single yarn and print statistic results.

At neutral, oxidizing atmosphere, the long-term use can still maintain good tensile strength, toughness and fiber structure.

The conclusions show that the tensile strength of joint is not less than base-metal's, providing with fine ductility.

The production of this invention has high tensile strength and extension at break, costs little, and is biodegradable.

This paper summed up the tensile strength of steel wire, annealing temperature and annealing time by experimental datas of wire annealing.

There was not an important effect of the heat input on tensile strength.

Marriage is love's crucible -- it has the tensile strength to contain the heat of self-transformation.

Otherwise, the tensile strength of molybdenum of molybdenum wires is increased considerably as a result of the permeationstrengthening.

Early concrete cracks because concrete's shrinkage deformation and concrete elastic modulus and tensile strength does not adapt produces.

But for tensile stress as it exceeds the permissible value, the walls may be destroyed for tensile strength failure.

With increasing fish skin gelatin ratio in composite films, tensile strength increased and elongation to break decreased.

A theoretical modelling of tensile strength of powder bonded nonwovens is deduced according to the concept of critical zone.

Wood based panels. Determination of modulus of elasticity in tension and of tensile strength parallel to faces.

The main technological properties are linear expansivity, tensile strength, flowability and solidification time.

The result showed that the cooling water temperature had a crucial role on the crystallization, morphology and tensile strength of PP films.

In a certain range, the tensile strength of composite increases with increasing volume fraction of modified carbonyl iron powder.

The tensile strength, impact strength, flexural strength, thermal properties and morphology of the composites were investigated.

But it is better than the leading-products of synthetic rubber-SBR polybutadiene rubber in tear strength tensile strength and tackiness .

The results show that the tensile strength and impact strength of the composite increase with the increase of carbon fiber cloth content.

Only the ultimate tensile strength is normally determined for specimens taken transverse to the centerline of the weld.

The results showed that the tensile strength, flexural strength and flexural modulus increased obviously with increase of amount of Mica.

FS 33Ais suitable for machining free cutting steel, steel up to 60 tons tensile strength in multi-spindle, multi-tool lathes and automatics.

Calcium carbonate filled rubber, sulfide rubber, can be higher than that of pure tensile strength, tear strength and wear resistance.

The variation of ultimate tensile strength with length FOR amosite crocidolite, chrysotile is shown in Table 2.

The corrosion of bar is a more important factor for the crack spacing distributing than concrete tensile strength.

The disks with small axial thicknesses can be completely quenched quickly to achieve full-hard state and high tensile strength.

With the increasing of DOP contents, the tensile strength declined, but the impact strength as well as foaming ability were(improved).

It has high tensile strength, peeling strength and tearing strength, it has long life compare to cold and heat lamination ones.

TESTS RELATING TO PAVEMENTS. WATERPROOFING MATERIALS FOR STRUCTURES. DETERMINATION OF TENSILE STRENGTH AND DEFORMATION.

Adding elements of Zr and Cr can increase the tensile strength, and electric conduction can be improved by solution treatment.

With average pore diameter increasing, however, the tensile strength decreases in a certain extent.

Mild steel has a high tensile strength, this being about 200 times that of concrete.

Palmitic acid seemed to decrease the elongation percentage, although no conclusive results were found on tensile strength.

Adding appropriate tension to the CF yarn during sample soldering, the higher CF tensile strength can be obtained.

What's more, it owns high tensile strength, bending modulus and impact toughness as well.

The cube cleavage test is an indirect method to determine the tensile strength of concrete.

It was indicated that the tensile strength of rock material increased with the increasing strain rate.

Calculation of rock tensile strength, used to judge the stability of the roof.

Tensile strength corresponds to the maximum tensile stress that may be sustained by a specimen.

Tensile strength and elongation of the molybdenum plate were significantly enhanced by the existence of La2O3.

Introducing toughener, copolymerization, or using proper catalyst may improve the impact strength, but reduced the tensile strength.

The cross section area was decreased due to corrosion attack in decarburized region, resulting in the tensile strength reduction.

Tensile strength for newsprint production cards and membership cards are very important indicators.

The fiber breaks into incrementally smaller fragments at locations where the fiber's axial stress reaches its tensile strength.

The tensile strength, tensile elongation , surface resistivity and volume resistivity of the vul. . .

the breaking force of rope has obvious linear correlation with the diameter, number of bends, tensile strength.

Feature: high tensile strength , good elasticity , little elongation, high intensity, good heat resistance and oil resistance.

adhesives for paper and board , packaging and disposable sanitary products - determination of tensile strength and elongation.

It has excellent resiliency, tensile strength, and abrasion resistance.

Further increase in the PMMA coating thickness adversely reduces the tensile strength of the composites.

Instead it was the guts of cattle that were selected for their tensile strength and strung for use on the courts.

With an increase of tensile strength of geo membrane, puncture resistance becomes larger.

The elongation at break, tensile strength and tearing strength of the HVSSBR cured with EV system are the best.

RUBBER OR PLASTICS CELLULAR MATERIALS. DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK FOR FLEXIBLE CELLULAR MATERIALS.

This test had built the influence formula of light micro structures of coke pore-wall materials on the tensile strength.

Results: Tensile strength and micro-hardness of plasma-welded titanium had no difference from the control group.

The beta-titanium frame offers unparalleled lightness, while maintaining an exemplary tensile strength and resistance.

Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension.

The ultimate tensile strength and elongation of extrusion bar after forging process was much higher than that of the direct extrusion bar.

Tensile strength and impact toughness of steel contained tin could be developed with the increase of cerium content.

the tensile strength and break elongation of emulsion film increase gradually with the increase of vinylidene chloride content.

The results show that tensile strength and tensile modulus increase and cold-resisting property descends with temperature dropping.

Finally, a regress equation of tensile strength testing indexes and mechanical properties of the fabric is derived.

perhaps the tensile strength of its legs are closer to steel or carbon nanotubes than to bone.

Cast ACRYLIC is highly regarded for its optical clarity, high tensile strength, and outstanding light transmission properties.

Shaft: Steel, high tensile strength, turned, ground, and polished of ample diameter for maximum speed operation without vibration.

Paper tensile test machine is a kind of tool used for testing the tensile strength of paper.

almost no ductility, tensile strength, wear resistance, corrosion resistance, lighter weight.

The result showed the impact strength and tensile strength of the composite increased with the increase of the content of the glass fiber.

Product has outstanding advantages, acid, alkali, oil, cold, high tensile strength and elongation at break, good performance.

Sealants - Determination of adhesive and cohesive force by endurance tensile strength after thermal treatment.

The effects of defects on tensile strength and fatigue performance and defect detecting and repairing techniques were summarized.

Specific strength. The ratio of tensile strength to specific gravity for a material.

The result show that the yield strength of the bars drop apparently and the tensile strength rise a little.

These two repair materials have good repair capacity, which can maintain adequate tensile strength of abdominal wall after operation.

TEXTILES. WOVEN ARTICLES. DETERMINATION OF THE TENSILE STRENGTH AND ELONGATION.

Sealants - Determination of adhesive and cohesive force by tensile strength test until rupture after thermal treatment.

By analyzing the force applied on the tubing, the tensile strength and anti-fatigue strength of the tubing are calibrated.

Finally, tensile strength of polymer materials was determined, and their hemocompatibility was evaluated by platelet adhesion experiment.

CONVEYOR BELTS WITH ARAMIDE CARCASSE. TENSILE STRENGTH AND ELONGATIONS. SPECIFICATIONS AND METHODS OF TEST.

The membrane was characterized by pure water permeability, porosity, bubble point, mean pore radius and tensile strength.

To split tensile strength and flexural strength, with the increase of air content, strength increase firstly and then decrease.

Meanwhile, a comparison was also made, after the rinse of EDTA, of tensile strength of casting post after their cement.

Rock - Determination of the tensile strength - Indirect method - Brazil test.

Antimony also increases tensile strength but decreases cross section sensitivity of vermiculate cast iron.

The changes of the tensile strength of the PTFE composites reinforced by glass microballoon were studied.

However, the tensile strength, flexural strength and impact strength showed an increasing tendency as the particle size was 200 meshes.

With the increase of porosity, the tensile strength decreases with exponential distribution.

Grains in the microstructure refined and the hardness, tensile strength and yield strength increased through an extrusion process.

The tensile strength at high temperature, flexural properties and impact strength are improved with the addition of GF.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 417 : tensile strength (crimped connection).

With the increase of notch root radius and the decrease of stress concentration coefficient, the tensile strength decreased.

TEXTILES. TESTS ON KNITWEAR. DETERMINATION OF THE ULTIMATE TENSILE STRENGTH.

Therefore, the Brazilian test is not suitable to measure the tensile strength of rock-like materials.

Soldering on ADI surface decreased the ADI tensile strength and elongation, and solder coating could not prevent from water embrittlement.

The results show that tensile strength changed not too much, but impact strength decreased evidently.

Mixed concrete splitting tensile strength enhanced obviously, and have excellent strength restore performance.

The tensile strength of alloy was affected by solid solution extent and grain size of the solute atoms.

The nitrite chrome-molybdenum steel crankshaft guarantees the best tensile strength and surface hardness for long-time operation.

As these properties are reduced there is also a decrease in tensile strength and an increase in the ductility and toughness of the steel.

The results showed that the obtained polymer had good processability with good tensile strength.

The multi-factor combined effects on tensile strength and elastic modulus of CFRP sheet are stronger than single factor effect.

The initial reduction of tensile strength was due to the high temperature annealing effect.

Twin-needle reinforced stitching with a high tensile strength thread.

High tensile strength : The belts are suitable for large span , long distance transportation of materials .

surface flaw often occurs during manufacturing , and surface flaw has greater effect on tensile strength than interior flaw does.

The measured average tensile strength is decreased also evidently with porosity, but more sensible to porosity.

The present invention discloses opaque and white monofilaments that retain tensile strength even after exposure to high levels of UV light.

the number of porosity is major factor of affecting tensile strength and elongation.

To reduce number and size of flaw is the main approach to improve tensile strength of carbon fiber.

The composite geotechnical fabric has high tensile strength and low elongation, which avoids soil erosion.

The tensile strength and the elongation percentage of the parent metal and the weld zone increased slightly.

The relationship of cotton hollow yarn tensile strength against PVA content is tested, analyzed and discussed.

The results showed that the tensile strength, elongation at break and tear strength increased with the OMMT content increasing.

The tensile strength decreases slightly, and the elongation rate significantly increases in the processed zone.

RPC tensile strength and flexural strength mainly increased with increasing content of steel fibers.

However, the approaches of molecular compositing and nanocompositing may result in enhancement in both tensile strength and toughness.

increasing of PVA content can both increase the tensile strength and the elongation at break of the material.

The formulation was concluded by measuring Chore A hardness, tensile strength, elongation at break.

Experiment shows that the static tensile strength of concrete is reduced by free water in the cracks and pores.

Solution treatment temperature has a significant impact on the tensile strength and elongation.

But the splitting tensile strength, flexural strength and dry shrinkage property are improved much better.

Rubber- or plastics-coated fabrics. Determination of tensile strength and elongation at break.

The penetration mechanics of steel targets with different tensile strength were analyzed.

Tensile strength and impact toughness of welded joints are slightly higher than that of the base metal.

Homogenization treatment before the extrusion coarsened the grain size and reduced the tensile strength and yield strength.

their elongation at break increase, while tensile strength decreased slightly compare to pure PLA.

Asbestos and rubber compressed sheets for seals. Determination of tensile strength.

The mass, tensile strength and electric resistance are calculated from nominal diameter.

The tensile strength of the bonded specimen met the specification but the ductility was lower.

The effect of welding process parameters on the tensile strength and Fe content of the copper and shear strength was analyzed.

Footwear - Test methods for outsoles - Tensile strength and elongation.

Their strength: they're almost the strongest material, tensile strength material known.

Michel: Ever hear of tensile strength? Hooke's Law of Elasticity?

The content of hydroxyproline and the ultimate tensile strength in group A were higher than those of groups B and C.

The pore radii distribution has some influences on tensile strength of disk model with smaller porosity.

The tensile strength and broken elongation of composite decreased firstly and then increased.

Meanwhile it shows that Y can purify melt, refine the grain, improve electrical conductivity and the tensile strength of the C194 alloy.

Large numbers of flaw on carbon fiber is the primary factor that restricts tensile strength of carbon fiber.

The invention is directed to carbon fibers having high tensile strength and modulus of elasticity.

Yet it is a relatively brittle material, the tensile strength of which is small compared with its compressive strength.

Footwear - Test methods for uppers - Tensile strength and elongation.

The fracturing pressure is dependent on in-situ stress, well deviation and the anisotropy of tensile strength.

PAPER AND BOARD TESTS. DETERMINATION OF THE WET TENSILE STRENGTH OF PAPER AND BOARD.

In this case, "cohesive strength" and "tensile strength" are not exactly identical in concept.

Tensile strength and stiffness increase as skin thickness ratio increases.

Impact strength was improved under the condition that the tensile strength kept basically constant.

The results show that formed processing has obvious effect on tensile strength of blast proof aluminum foil mesh.

Tensile strength was tested, and the joint fractures and microstructures were analyzed.

The tensile strength of artificial roof during the first drift is far greater the the first drift.

Cyotoskeletal intermediate filaments appear to impart tensile strength to the cell cytoplasm.

The water solubility, broken tensile strength of blend nano-fibers were tested and analyzed.

The dimensional effect of compressive and splitting tensile strength of poly. . .

The plasticizer also reduced the tensile strength, yet to enhance the elongation at break of films.

The periosteum is stronger in tensile strength than that of the fascia, but it is less elastic.

residual tensile strength of PP packaging belt was decreased when the strain was increased after the stress relaxation.

Ever hear of tensile strength? Hooke's law of elasticity?

Methods of test for masonry units - Part 6 : determination of bending tensile strength of aggregate concrete masonry units.

So, here we can only consider that boundary region has a lower cohesive rather than than lower tensile strength.

The raw rubber with high tensile strength and elongation, are self-reinforcing rubber.

In general, the uniaxial tensile strength variation of grit stone first added, and then reduces.

With the increasing of the dipping time in water, the tensile strength and elongation at break also decrease.

Communication cables - Specifications for test methods - Part 3-2 : mechanical test methods - Tensile strength and elongation for conductor.

Particleboards and fibreboards. Determination of tensile strength perpendicular to the plane of the board.

APPLICATIONS Brown Fused Alumina is a tough, sharp abrasives which is highly suitable for grinding metals of high tensile strength.

A second test gives, indirectly, the tensile strength.

When the GF content reaches a high level, the tensile strength at room temperature decreases with further increasing GF content.

As the shear rate increased the elongation at break increased and the tensile strength increased at first but decreased finally.

In road construction, the flexural tensile strength is a key index of cement concrete.

While tendons have enormous tensile strength, they have very little tolerance to stretching.

The tensile strength and Shore A hardness decreased with EPDM amount increasing.

Some alloys are stronger than ordinary steel or even equal to special steel in tensile strength.

For Al-30%Si alloy, the tensile strength, percentage elongation and impact toughness and HBS is increased firstly and then decreased.

Wood wool slabs. Measurement of transverse tensile strength.

The effect of the MMT content on the bond strength was studied by testing the tensile strength of sanding core.

Ultimate tensile strength admissable deviation (wire in reels over 250 kg by weight) is due to meet the GOST requirements.

Stomatal core pad, breathable strong tensile strength.

The results show that grain size becomes smaller, and elongation and tensile strength of 7055 alloy are increased greatly.

Of course, add the appropriate immunointensifier, newsprint and high tensile strength is good.

Compared to the matrix resin, this nano hybrid resin has shown reduction of volume shrinkage 38% and increase of tensile strength 31%.

Textiles. Test methods for nonwovens. Part 3 : determination of tensile strength and elongation.

Most metals have high tensile strength and high compressive strength.

Because of its fiber-like characteristics, collagen provides skin cells with added tensile strength.

In bath by adding softener, positive coloar, and silk for tensile strength and stiffness and wear-resistant stretch.

Concrete bending tensile strength test machine.

Standard forms for concrete bending tensile strength test cube.

N326 in natural rubber high tensile strength, tensile strength and wear resistance and jumped cracking.

But the tensile strength will be reduced a little, and the yield ratio increased.

For the nickel deposit, microhardness increased 90% and tensile strength increased 130%.

The study about the direct tensile strength of cement based material with this test method need to be elucidated further analysis.

It has excellent resistenace to fuel and oil, and has good tensile strength.

However, brittle materials such as cast iron have high compressive strength but only a moderate tensile strength.

The mechanical properties, such as the tensile strength, elongation at break, and the infra-red spectrum of the film were measured.

High tensile strength and good acoustic absorption.

Concrete , salt (deicing agent) penetration , and irreversible loss of concrete tensile strength.

For CF with low tensile strength, the method is better for its reinforcement.

disposal, it can im-prove tensile strength of fibre, break intensity, binding strength and freeness within the inner fibre.

When the molar percentage of crosslinking agent is about 3 %, the tensile strength is maximum, the water absorption a. . .

No breakdown in the tensile strength of fabrics from harsh chemicals.

Tensile Strength: The force required to rupture a specimen.

A formula has been developed to calculate the ultimate tensile strength of GFRP rebar.

If the paper tape tension over its tensile strength break occurs.

It is clear that both tensile strength and elongation at break and the film thickness and raw material is.

The more the contents of trans-in structure, the higher the tensile strength.

The splitting experiment is one way to test the tensile strength of semi-rigid base material.

Figure 1 Tensile strength and microstructure change during hot stamping.

The maximum tensile strength of composite by dynamic injection molding is increased by 11.

The tensile strength elongation after fracture and the 0. 2% proof strength shall be determined.

Tensile strength refers to the paper or board the tension.

Cast iron cannot compare with steel in tensile strength.

The tensile strength, elongation at break and tear strength of TAIC were higher than those of PDM while the compression set was opposited.

for BOPP film, to prevent exposure and long-term storage of tensile strength, and avoid the drop.

The results show the welded joint of 7075 aluminum alloy welded by FSW has high tensile strength.

This is a relatively brittle material tensile strength, compared to small size, light weight, strength.

and concrete loop tensile stress laid on penstock waist outer edge and top inner one is 2-4 times of design tensile strength of concrete.

Increasing the fibre weight fraction in the ABS matrix from 10 to 30 wt-% resulted in improved tensile strength and tensile modulus.

The tensile strength of composites was enhanced because of adding nano-inorganic particles into polylactide.

mica to nylon produced a five-fold increase in the yield and tensile strength of the material (3, 4).

The pre-deformation of 15% for 2519 aluminum alloy is better according its tensile strength and plasticity.

Did you give any consideration to carbon nanotubes? They're lighter, cheaper, and have twice the tensile strength.

Optical fibres - Part 1-31 : measurement methods and test procedures - Tensile strength.

The tensile strength and the elongation rate increase by 18. 16% and 12% than those without ultrasonic assistance, respectively.

For grinding of middle and high tensile strength metal , such as carbon steel , alloy steel , hard bronze, forgeable cast iron , ect.

bamboo has a higher tensile strength than steel.

As compared with PS304 coatings, The PM304 samples made by MA had lower porosity and higher tensile strength.

Applicable to high tensile strength metal grinding, such as general carbon steel, alloy steel, malleable iron hard bronze.

For grinding metals of the low tensile strength such as iron casting of gray and white broken copper workpieces etc.

Thin steel wire of high tensile strength .

TENSILE STRENGTH OF PARAFFIN WAX.

The tensile strength of wire, rope, ETC.

Various properties of the film were examined, such as tensile strength, O_2 permeability and moisture permeability.

if its tensile strength is too low , it will break.

Tensile strength is that property which resists forces acting to pull the metal apart .