thin-walled

This optimization process would be repeated until a set of parameters optimized for optimum design of a thin-walled structure was obtained.

However, due to the poor stiffness, thin-walled parts are easy to deformation in machining.

As a newly used material, steel thin-walled sonic-testing tubes used for the cast-in-situ piles have not a unified form of connecting.

To understand the overall mechanical properties of the thin-walled curved-box girders, an improved method is put forward in the paper.

The proposed method is applicable for the thin-walled member of any cross section with any boundary condition.

Refer to the analysis ot the wide, thin-walled flat steel box girder, it need the space analysis with the general finite element program.

The crackle and breach defect of5A05, 5A06alloy thin walled tube is always one of the hard problems in cold rolling.

Carry on an investigation into Thin-walled light steel structure residential building technical and economic characteristics.

This research work is a further study of current calculating methods of the shear lag effect in thin-walled curved box girders.

Base on optimal design of the typical thin-walled rails, the crashworthiness of a sport utility vehicle's frame is improved.

Buckling distortion is inevitable in thin-walled structures. This is one of the main problems which affect the quality of welded products.

Air filters comprising thin-walled textile filter bodies have to be cleaned periodically.

Taking the oil pan of an engine as an example, the FEM model of a thin-walled structure is established.

At this time, the optimal expanding structure get shorter, so the influence of the truncated thin-walled tube is analysed.

Composite Thin-walled curved surface structures are widely used in aeronautic and aerospace engineering.

Many thin-walled structure components used in aero industries have complex structure and high machining accuracy.

Cold-formed thin-walled steel members are the main member of light steel structure.

Therefore, the spinning of thin-walled tube with large thickness reduction can be realized through multi-pass ball spinning.

Coronal reconstructed images are useful in localizing the thin walled cystic mass and its anatomic relationships.

Results The diagnostic mainstay of lymphangioleiomyomatosis was thin-walled cystic lesion with diffused distribution in bilateral lung.

With new research ideas, thin-walled tube occur plastic deformation by expanding to achieve the purpose of energy absorption.

Because there is no component compact, fragile and thin walled parts can be confidently cleaned.

It indicated that the accuracy meets the requirements. Some instructions to the design of various thin-walled deep beams were obtained.

The hollow- sinking of a thin - walled tube is more complicated than the drawing. So far there are few references on it.

and thin-walled light steel structure residential construction are important elements of anti-corrosion and fire treatment were introduced.

An explicit finite element method for the evaluation of dynamic effects of thin-walled structure in impacting processes was presented.

The results show that non-uniform thin-walled stress is the main reason of the frequent rock burst in driving roadway.

An effective algorithm for calculation of the sectional properties of thin-walled bars with general sections is presented in the paper.

Practice shows that the process to take some measures to solve thin-walled parts can be effectively deformed and not high precision.

The tool electrode is formed to be thin-walled pipe, and high pressure gas medium is supplied through it.

When determining the diameter tolerances, remember that thin-walled rings of radial bearings may become slightly deformed after grinding.

The results of this paper can give a reference to the engineering application of cold-formed thin-walled steel structure.

Out plastering wall with mortar thin walled core tube and its construction method were introduced in the paper.

When designing this kind of bridge, the signal thin-walled pier and signal double-walled pier are usually used.

Hydro-mechanical deep drawing (HDD) is an effective method for manufacturing thin-walled parts.

In this paper the research on thin-walled structure is one type of particular thin-walled structure -the thin-walled bar structure.

An analytical method is proposed for calculating free torsion constant of complicated thin-walled cross section from free torsion theory.

A complicated thin-walled box girder is taken as a validity numerical example to verify the analytical method.

Box-type parts of the structure of complex thin-walled and non-uniform, multi-site processing, processing is difficult.

The stiffener layout optimization of thin walled structures is addressed in this article using a topology optimization method.

Second, cutting performance analysis and process parameters optimization of thin-walled pieces was studied.

brilliantly colored arboreal fruit-eating bird of tropical America having a very large thin-walled beak.

trachea A thin-walled tube of cartilaginous and membranous tissue descending from the larynx to the bronchi and carrying air to the lungs.

extremely vigorous bamboo having thin-walled culms striped green and yellow; so widely cultivated that native area is uncertain.

The experimental results indicated that stiffened thin-walled composite plate can bear greater load after buckling.

Dynamic equations of thin-walled beams subject to axial impact were established and solved by finite difference method.

For hardened steel, alloy steel, high speed steel, high carbon steel, etc. Also for thread and gear grinding and thin walled workpieces.

However, local buckling is more likely to occur for thin-walled tubes, and thus decreases the lateral confinement on the concrete core.

Containers for household and chemicals , hollow thin - walled parts, and profile extrusion .

It is well adopted for casting of complicated & thin-walled components. This technique has profound developmental potential.

The work has much directive meaning in the machining of many thin-walled components.

PLAIN BEARINGS. THIN-WALLED HALF BEARINGS. DIMENSIONS, TOLERANCES AND METHODS OF CHECKING.

Bellows is a kind of elastic thin-walled shell structures with high torsion stiffness, but it is apt to be buckled .

The essential theoretical basis for the reliabity design of thin-walled pressure vessel was also put out.

Microscopically, it is composed of delicate thin-walled vessels on a background of connective tissue stroma.

Restrained torsion of thin-walled box beam with honeycomb core is analyzed on the basis of rigid profile assumption.

The cutting force and residual stress have considerable influence on the distortion of thin-walled parts.

In the process of machinery, the stiffness of the thin-walled parts become a key of influencing the precision.

With the increase of F content, holes become smaller, is porous for the thin-walled structure.

Preload Spacer --material used to adjust a fork's preload internally. Typically, thin- walled aluminum or PVC tubing is used.

Production technology of complicate Al alloy investment casting with thin walled section has been discussed.

As the plates are thin-walled parts, thus are suitable for vacuum adsorption principle of work to perform the grabbing function.

Thickness and weight: You really goods due to bone china, porcelain is very thin-walled light; Liepin is a heavy thick.

Based on the basic theory of axial and bending collapse mechanism of thin-walled beam, its stiffness characteristics are evaluated.

In order to large mode thin walled roll of hard alloy. When Grinding inner hole, created easy out of the shape.

Open thin-walled concrete box arch bridge generally uses the method of turning construction of thin-walled arch.

Plain bearings. Multilayer materials for thin-walled plain bearings.

The microstructure and properties of ZL201 alloy thin walled cylindric parts in extrusion casting were investigated.

At last, with the stiffness method, the effect of diaphragm density on restraining the distortion of thin-walled bar is analyzed.

Our factory also carries on researches of all types of non-standard thin-walled metal rolling forming machines.

PLAIN BEARINGS. THIN-WALLED HALF BEARINGS. METHOD OF PERIPHERAL LENGTH CHECKING.

PLAIN BEARINGS. THIN-WALLED FLANGED HALF BEARINGS. DIMEBSIONS, TOLERANCES AND METHODS OF CHECKING.

Seeds many, ovoid-subtrigonous, thin-walled, surface impressed-reticulate.

A type of Yshape thin walled box Girder Bridge structure was analyzed with the elementary beam theory, shell theory and the new method.

It could be thin-walled curved prefabricated components, also may make the template.

When the inflation pressure is small, the thin-walled shell undergoes a symmetric inflation.

A thin-walled beam subject to axial impact was analyzed theoretically.

The clamping schemes of thin-walled package were discussed on the base of FEM analysis.

The equipment is applied to the rapid casting process of thin-walled complicated casting, because the liquid metal can pour and fi.

As a result, it is suggested that distortion should be taken into account to calculate the thin-walled bar with restrained torsion.

Thin-walled molding injecting is a new technology for thin-walled products that based on the traditional injection molding.

Blood from the medulla enters short, stout, thin - walled veins .

Fourth, study the thin-walled parts to eliminate the stress method.

E. granulosus infection of the brain presents with one or more homogeneous, thin-walled cysts.

Plain bearings. Metallic thin-walled half bearings. Determination of the sigma 0, 01 elastic limit.

the phloem tissue consists chiefly of thin-walled cell.

Both atria are thin walled muscular chambers.

The bearing capacity of the cold-formed thin-walled steel which was used in combination wall.

For round or oval thin-walled unilocular cyst.

20 (19) Capsule campanulate to cup-shaped, thin-walled, apex truncate, lacking an exserted crown.

Because of the scale of acceleration, compressing thin-walled tube is very difficult to achieve the standard of pedestrian protection.

Fruit a thin-walled capsule, circumscissile or 2- or 3-valved, rarely a nut, often globose or subglobose, smooth.

This paper illustrates that the characteristic of the thin-walled open section beam must be considered to study this problem.

Effects of Electromagnetic Force in Traveling Magnetic Field on the Surface Roughness of Al Thin-walled Castings

It is highly important to study the thin-walled concrete-filled steel tubular member which was a newly developed composite member.

Experimental Study of the Influence of Processing Parameters on Forming Quality of Thin-Walled NC Bending Tube

Analysis and Study of the Very Thin-walled Light-gauge Steel Structural Multiple Story Dwelling System

Thin-walled stainless steel container is of a timber of science, low cost and good quality;

Exploration of Contribution of Cantilever Flanges of Thin-Walled Box Girder to Its Behavior in Warping Torsion

Fine, concentric grooves around the sprue; grooves parallel to the flow front in thin-walled areas

FE Analysis of Influence of Axial Feed Rate on the Ball Spinning of Thin-Walled Tubes

Equipped with Safe Lab system; Thin-walled cooling pipe consists of a translucent and gastight PFA tubing;

Generalized Variational Principle on Nonlinear Theory of Naturally Curved and Twisted Closed Thin-Walled Composite Beams

Preliminary research on the cause of the cracks in thin-walled flexible piers of continuous rigid frame bridges

Thin-walled Parts; Aluminium alloy; Milling force; Machining deformation; Residual stress; Finite element simulation;

Application research of response surface methodology in thin-walled structural optimization design in crashworthiness

Thin-walled cold formed steel structure to be adopted in architectural engineering

Weld with trailing impact rolling to control the residual distortion of the thin-walled planar circumferential weldment

Experimental and Analytical Study of the Shear Lag in Thin Walled Box Girders

Ultrasonic Linear Quantitative Automatic Detection of Thin-walled Cylindrical Pipe with Different Thickness

Research on Algorithm of Deformation of Workpiece Thin-walled Element in Virtual Machining Process and Experimental Verification

Nonlinear theory study of thin walled box girder taking shear lag effect in consideration

Generalized Displacement Method in Bearing Capacity Analysis of Thin-walled Structure Interacted with Foundation Soil

Investigation on the Strength of Lightweight Thin- walled Rectangular Structures Subjected to Internal Pressure

Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing

Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thin walled insulated cables

Characteristics Judgment and Graph Theory Disposal of Geometric Parameters in Complex Thin-walled Structures'Section

Analysis of ball spinning formability of thin-walled tubular parts of aluminum alloy

The elastoplastic torsion rigidity analysis of the centrifuge concrete filled thin-walled steel tubes

Application of a Thin-walled Structure Theory in Steel Bridge Calculation

Investigation on Cutting Force Modeling and Numerical Prediction of Surface Errors in Peripheral Milling of Thin-walled Workpiece

A Finite Element Method for the Restrained Torsion Reliability Computation of the Thin-Walled Beam

Magnetic Field Generator and Its Application to Thin-walled Aluminium Alloy Castings

Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range

Thin-walled Effects of a New Directionally Solidified Superalloy

Analysis of Forming Process of Steel Thin-walled Cylinder Sleeve and Membrane Gasometer and Its Calculation

Numerical investigation and optimum design of complex thin-walled structures subject to internal pressure load

Experimental study on effective width for compressive flange of externally prestressed concrete thin-walled box girder

Finite Element Analysis of Thin Walled Steel Tubular Members Filled with Centrifugal Concrete Subjects to Torsion

Transient Dynamic Response Analysis of A Thin-Walled Conical Shell

Application of Finite Member Element Method for Stress Analysis of Space Thin-walled Structure in Agricultural Machine Design

Coupled Bending and Twisting Vibration of Thin Walled Beam Bridges Excited by Horizontal Seismic Force with Nonlinear Damping

Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens

The Turnover Form Construction Technology for Thin-Walled Hollow Piers of the Wang Village Viaduct Bridge

Experimental Study on the Deflection and Crack of Externally Prestressed Reinforced Concrete Thin-walled Box Girder

Spatial computational analysis of considering rigidity of box corner reinforcement part for thin-walled box girder

An Approach of Multi-parameter Warping Displacement Function for Natural Frequency Analysis of Thin-walled Box Girders

A Method for Computing Sectional Geometric Properties of Thin-Walled Elements with Arbitrary Polygon Sections

Application of Single-Dimension-Finite-Element Method in Thin-walled Structures Dynamic Calculation

The Calculation of Flexural-torsional Buckling of Simply Supported Thin-walled Beams Containing Openings

Application of Explicit Finite Element Technology to Numerical Simulation of Body Thin- walled Structure

Torsional-Flexural Buckling of Mono-symmetric Thin-Walled Beam-Columns with Open Sections under Complicated Loads

A Numerical Approach for the Calculation of Plastic Strain of Thin Walled Tube Subjected to Combined Stresses

Experimental research on the reinforced steel fiber high-strength concrete pure torsional thin-walled box girder

Analysis of Stability in Construction of Reinforced Concrete Open Thin-walled Box Structure in Swivel-erected Bridge

Modeling Coupled Fluid Flow and Heat Transfer During the Low Pressure Casting Process of Thin-Walled Plate Castings

Experimental research on the externally prestressed high-strength concrete thin-walled box girder

Comparison and research of the behavior of cold-formed thin-walled channel purl under flexure-torsion

Research on square stub columns with oblique ribs of concrete-filled thin-walled steel tube under axial compression loading

Mechanical Analysis on Paraboloid-typed Necking Forming of Thin-walled Cylindrical Workpiece

Newly developed vacuum differential pressure casting of thin walled complicated Al-alloy castings

Plain bearings--Thin-walled flanged half bearings--Dimensions, tolerances and methods of checking

Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test

Correlativity of monosymmetric thin-walled beams of open section under combined bending, shear and torsion

Characteristic Analysis of Composite Thin-Walled Beams under Constrained Torsion

Determining longitudinal residual stresses of welded thin-walled steel tubes by hole-drilling methods

Simple calculation of the coordinates of the bending center of the thin-walled beam with open section

Investigation on Prediction Method of Surface Deformation of Thin-walled Workpiece in Peripheral Milling

Development and Prospect of Counter-gravity Casting Complex Thin-walled Castings of Nonferrous Alloy

The Crashworthiness Design Optimization of Thin-walled Component with Circular Tapered End

Distortion Analysis and Experimental Research on Longitudinal Cracks of Thin-Walled Hollow Slab

The Technology of Hydraulically Lifting Climbing Forms in Constructing Thin-Walled Hollow Piers

Stability Analysis of Thin -Walled Beam with Continuous Translational Restraint

Beam element-based finite element analysis of interaction between soil and thin-walled cylindrical piles

Calculation Research on Temperature Control in High Strength Massive Concrete of Base of Thin-Walled Hollow Pier

Characteristics of the Strain and Strain Rate on the Thin-Walled Square Tube Under Impact Loading

Application of Prestressed Concrete Thin Walled Span Pipe in the Treatment of Bridge Abutment Soft Foundation

Study on the Ultrasonic Testing Algorithm for the Thin-Walled Pipes with Variable Wall Thickness

Stability analysis of thin-walled members by degenerated three-dimensional beam element method

Measure and Calculation for Roundness of Thin-walled Cylindrical Shell in Horizontal Condition

Thermal-structural finite element analysis of space structures consisting of thin walled beams

Application of response surface method in impacting energy absorption of thin-walled structure

A Criterion to Distinguish between Thick-walled Cylinder and Thin-walled Cylinder under Dynamic Loading

Elemental Stiffness Matrix of Thin-walled Beam and Its Application

Simulation of Thin-Walled Aluminum Profile Extrusion Process with Multi-stage Finite Volume Method

The Element Flexibility Matrix of Thin-walled Beam and Its Application

Fast Prediction of Static Form Errors in Peripheral Milling of Thin-Walled Workpieces Using Real Cutting Depth

Non-linear FEM Analysis for Dynamic Progressive Buckling of Thin-walled Circular Tubes under Axial Impact Load

Plain Bearings-Thin-Walled Half Bearings With or Without Flange-Tolerance, Design Features and Methods of Test

Finite element analysis of buckling moments of thin-walled beams with nonsymmetrical I-shaped-sections

Research and development on thin-walled tube NC bending database management system with pre-forming design

Construction of the rectangular hollow thin-walled high pier by turn over stripping form

Analysis on Harmonic Response of the Thin-Walled Rotational Workpiece in the Turn-Milling

Technical specifications for cold shaped thin-walled steel section structures

Finite element simulation for optimal clamping scheme of thin-walled workpiece in milling process

One dimensional finite element method for thin-walled curved box beam analysis including the shear lag effect

Calculation of whole stability of axially loaded compression member of cold-formed thin-walled steel sections under ultimate load criterion

Mechanical States Studies on Half-span Turning Arch Bridge of Open Thin-walled Section under Construction

Stress Analytical Investigation of Interaction of Thin-walled Cylindrical Pile and Soil

Theoretical and Experimental Study on Section Straightening of Special Thin-walled Tube

Experimental Study and Control of Cracks in Steel Fiber Reinforced Concrete Thin-Walled Box Beam in Pure Torsion

Transient Thermal-Structural Analysis of Space Structures Consisting of Thin Walled Tubes by FEM

Study on Manufacture of Thin-walled Pipe Elbows by Hydro-bulging Tubular Single-curvature Polyhedron

Thickness Measurement of Wall and Analysis for Large Thin-walled Pressure Vessel after Blast Sanding

Dynamic Stability of Thin-Walled Member with Variable Stiffness in Consideration of Damping

A NC Compensation Approach of Machining Aeronautical Thin-Walled Workpiece by Tilting Tools

Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

General Situation of the Research on the Stability of the Thin - walled Structures

Construction and Construction Monitoring Techniques for Thin-Walled V-Shape Piers

Analysis of the Load-Bearing Capacity of Thin-Walled Steel Roof Panels and Connections

Countermeasures Against Ordinary Defects of Thin Walled Steel Castings

Horizontal bearing mechanism of thin-walled concrete cylindrical piles

Analysis of Reinforced Steel Fiber High-Strength Concrete Pure Torsional Thin-Walled Box Girder

Discussions about the Existing Problems of the Theoretical Studies on Shear Lag Effect of Thin-walled Box Girder

The Spring-element Numerical Model of Bed-seated Large-diameter Thin-walled Cylindrical Shell Structure's Internal Force Computation

The initial parameter method for analysis of frame-shear wall-thin walled cores cooperating systems

Study on the Fluid Jetting Technology Control Thin-walled Part Machining Deformations

Numerical Simulation for Large Thin-walled Plate Castings in Counter-gravity Mould Filling

Study on propagation properties of combined stress waves in viscoplastic thin-walled tubes

Application of Turning Over Wood Stripping Form to the Construction of Hollow Thin-walled High Pier

Mechanical Behaviors of Thin-walled Polyethylene Lining at the Gaps of Steel Pipeline

Element stiffness matrix of thin-walled beam considering restrained torsion

A Scheme for the Compensation of Deformation Error in NC Machining of Thin-walled Complex Parts

The Computation of the Elongation of Thin-Walled Workpiece From the Clamping Force

Geometric Nonlinear Finite Element Analysis of Open Thin-walled Frame Structures

Stress intensity factors for cracked rectangular cross-section thin-walled tubes

Power spinning deformation of thin-walled cylinders with longitudinal inner ribs

Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

Recent Development and Tendency of Nonlinear Theories of Stability for Thin-walled Shells

Theoretical study on lightweight design of thin-walled beam structure for automobile body

Study on Low Pressure Casting Process for Complicated Thin-walled Aluminum Alloy Castings

Finite element ansys of hydrated heat temperature stress of the thin-walled box pier

The application of continuous purlin of cold-formed thin-walled steel in light-weight steel structure

thin - walled cylindrical steel tower silos ; explanatory notes

Research on Three Types of Load Schemes of Thin-walled Column Parts with Finite Element Analysis

Experiment and ANSYS Finite Element Analysis on Concrete Filled Thin-walled Steel Tube Joints

Plain bearings - Thin-walled half bearings - Checking of peripheral length

Experimental Study on Milling Corner of Aeronautical Thin-Walled Component

Design of Tool and Experimental Study with Respect to Ball Spinning Forming of Thin-walled Tubular Parts

Research on Warping and Torsion of Spot-welded Thin-walled Beams with Elastic Constraints from Both Ends

Variational Method for the Shear Lag Effect in Constant Section Thin Walled Box Girder

This system of thin-walled light steel structure residential home and abroad, the use and development;

EAS element-based FEM analysis of interaction between thin-walled cylindrical piles and soil

Optimal Designs of Square Concrete Filled Thin-walled Steel Tube Long Columns with Straight Ribs

calyx tubular, basally thin walled, apically thick walled and either completely fused or not;

Limit of width-thickness ratio of steel plates in concrete-filled square thin-walled steel tube columns

Study on Vacuum Suction Process for Complicated Thin-walled Aluminum Alloy Castings

A Study on Crashworthiness of the Thin Walled Column by Computer Simulation

Crashworthiness analysis of automobile thin-walled beams under axial load

Revision of thin-walled cystic bleb by transposing conjunctival flap technique

Demolition by blasting used in thin-walled open caisson

International Conference on Thin-walled Structures

Ultimate Compressive Strength of Stub Columns of Concrete-filled Thin-walled Steel Tube

Thermal buckling FEM of large space structures including thin-walled open section beams

Behavior of Cold-Formed Thin-Walled Steel Short Columns under Uniform High Temperatures

Calculation and Analysis on Critical Moment of Thin - walled Beams under Unequal End Moment

Design and Manufacture of Ultrasonic Cleaning Equipment for Thin and Long Thin-walled Tubes

Research on Guided Circumferential Waves in a Thin-Walled Pipe

Dynamic Property of Small Deformation of Thin Walled Elliptical Bar Under Pressure

Prediction about Ratcheting Strain of Thin-walled Tube Under Cyclic Inner Pressure