the shaft

When axial loads are incidental and of small magnitude, the members are kept from sliding along the shaft by means of a set screw.

Also, tucking the scrotum as well as the shaft inside a ring seems to relieve compression on the penis and reduce injuries.

He bent it around his blood-red , leaking cock, pressing it against the shaft with his hands as he created a channel to thrust into.

Measurement of graphite sleeve bearings and the diameter of the shaft and see that they meet the surface finish.

It has two circular endplates with the shaft running through the middle of them and curved vanes strung longitudinally between them.

The rails pass up to the top of the shaft, where they are taken over a pulley which can be driven in either direction by an electric motor.

Tom's heart gave a great thump, and he ran like the wind to the shaft .

"We drill holes, " said Zhao Zhaoguo, a migrant from Henan province on his way down the shaft.

Suddenly, a piece of concrete the size of a quarter jumps free and plummets down the shaft as the rock-hammer pushes through.

I place the tip of the cane on the underside of your cock and slide it up and down the shaft. It gently taps on your balls.

at the top of the shaft there is usually a structure called a headframe . It contains some of the machinery necessary for mining operation.

The shaft of the ceremonial mace is the whorled tusk of a narwhal, a small Arctic whale. The door handles are of walrus tusk.

When the eagle looked down, he found that the shaft of the arrow was feathered with one of its own plumes.

The propeller is threaded over the shaft, and when mounted between the magnets, the heavy blade will drop to the bottom.

Thisallows them to be safely mounted horizontally (unlike sleeve bearings), since the fluid being pumped lubricates the top of the shaft.

All the time everybody rotation, the shaft, stop the transfer. Whether you remember, who had passed, the wind dust, flooded the traces.

The upper end of the lifting rod is provided with the shaft sleeve and a button which are connected with the eccentricity handle.

Also the hardened steel of the shaft pulling onto the mild steel of the frame is going to be a weak point.

As the system measures the exact expansion of the inner ring, the interface fit between the bearing and the shaft is accurately achieved.

The same goes for some of the Triple Combinations, where the 3rd device is connected to the shaft by an internal coupling.

Also, do not mistake the direction of pegs installed, so the opposite angle of the shaft hole string.

The material in the flow of water to prevent sewage from the work of the shaft has also been used.

The shaft must be strong enough to deliver this twisting force to a loaded axle without deforming or cracking under the strain.

It seems that Peckover, when he hit the bottom of the shaft, regained consciousness before anyone could reach him.

In a particular embodiment of the invention the elastic component forms an integral part with one of the bearing and the shaft.

Because an eccentric can be attached anywhere along a shaft, it is unnecessary to form any part of the shaft into a crank.

In the jacket's back, just below her left shoulder blade, was a round hole that would have admitted the shaft of a pencil.

Usually in gyro designs the shaft member tends to run hotter than the outer member.

It occurred to me suddenly that I could make the light travel more strongly if I asked for the shaft to be as wide as the room.

On a second unmanned test run, rescue rs descended the capsule the full length of the shaft.

The shaft-horse swayed to and fro, pricking up his ears as though to ask: "Are we to begin or is it too soon? "

Quick-clamping device with a hub centering ring secures a vehicle wheel rim on the shaft of a wheel-balancing machine.

The shaft system that consisted of propeller and shaft can rotate around the center line of the shaft when ship is sailing.

The shaft, (axle) of an automobile fits through the bore of a cone of the tapered roller bearing.

The company also stamping processing mainly small pieces of the shaft processing products.

Set the bullet vibrator in the base and feel it all the way up the shaft for a thrilling feeling.

The spiral shape of the fracture surface indicates that the shaft had been overloaded by a high torque prior to breaking.

In all cases of clearance fit, the upper limit of the shaft is always smaller than the lower limit of the mating hole.

The non-magnetic interlayer in the rotor is triangular-shaped and connected with the permanent magnet at a section close to the shaft.

hence, the shaft must be rigid enough to prevent overloading of the supporting bearings.

The lymphatic vessels are shown in white. A section through the shaft of the femur, a long bone. . .

If transition at the shaft collar of a circular shaft adopting closed angle will bring biggish stress concentration as bearing load.

Each end of the drive shaft has a yoke used to connect the shaft to other drive line components.

Lastly during assembly care is taken to avoid damaging the seals when passing over the keyway or performing bearing surfaces of the shaft.

On the other end of the shaft that the turbine is attached to, the compressor pumps air into the cylinders.

The yoke might be rigidly welded to the shaft tube or it might be a spline, or slip yoke.

His voice rose from the shaft like that of an oracle.

The main engineering geological which probably arise during the shaft building through the thick over soils are analyzed.

This particular failure was accelerated by the sharp corners that had been cut in the shaft's rectangular keyway.

It has a supporting plate with a central shaft, and also has a detachable grinding wheel fixed on the shaft.

The Shaft House is an unexpected and exciting spatial experience that survives the limits of our ordinary living spaces.

An iron ore shaft in Hebei was constructed by drilling. After removal of steel casing in the shaft, water leaked around the shaft wall.

Then, polished both ends of the shaft, the replacement of damaged after the installation of an oring, at just the right amount of force.

Whenever the phenomenon of large grinding shaft hole, the old shaft hole must be blocked up and re-drill the shaft hole.

The shaft is provided with a micrometer adjustment at the thrust bearing to permit proper centering of impeller in casing.

The thin corpus spongiosum runs along the underside of the shaft, enveloping the urethra, and accounts for all of the head.

By the top of the hill near the midline of the shaft is perpendicular to the tunnels of the excavation, is hole.

Television reports showed workers welding narrow pipes to be threaded down the shaft.

The shaft is shorter in design the shaft can be gently adjusted (bent) to get the perfect rotation for you.

If necessary, the shaft and housing can be used for raceways instead of separate inner and outer races.

The shaft was shaped to let in the morning and evening sun but throw shade over the seedling at midday.

As the sewage water level rising in the shaft, Tokyo Electric Power Company had to transfer part of the sewage.

Though the extra depth of these keys weakens the shaft considerably, it prevents any tendency of the key to rotate or move axially.

It is the business end of a deadly weapon; a spear - the shaft, of course, is long gone.

The conical part of the lower part of the shaft furnace is the cooling zone of the shaft furnace direct reduction metallurgical furnace.

Tokyo Electric Power Company in the shaft next to the top of the concrete tunnel dug a hole, and then injected into these "polymers. "

"The muscles manipulate the shaft of the motor like a finger and thumb would hold a pencil, " says Dr Anderson.

In the light of bring the shaft lining material in fully play, it is put forward a method to optimize the combined shaft lining structure.

Objective: Now the effects of cerclage band used in the treatment of fractures in the shaft of long bone were still unclear.

Puller , a tool used to unload the bearings set in the bearing bore, can unload bearings and workpieces mounted on the shaft.

The shaft must test in bearings, may be started by a clutch or stopped with a brake.

Andy snags the conduit again. He contorts out of the hole and dangles into the shaft.

An axial clutch is one in which the mating frictional members are moved in a direction parallel to the shaft .

The underground river just above the shaft had 108, the shape of a well-known Xinjiang Karez , a very rare and spectacular.

The shaft shall be hexagonal or square to ensure positive rotation of the disc and be totally sealed from exposure to the process liquid.

The original motor installed base can take advantage of, the original motor pulley or you can remove the new motor mounted on the shaft.

The rollers are guided by the lip of the shaft washer and are generally retained in a machined brass cage.

High-velocity air flow, generated by a high capacity centrifugal blower, passes through the shaft of the speed-up zone of AFC.

Packing or seals are used to prevent the pump leaking around the shaft where it emerges from the pump case.

Through his mining novels I try to discuss the significance of the shaft world. This paper consists of three parts.

The shaft of motors subjected to alternating load will fail due to wear-induced size loss at a certain degree.

A commonly used type of key has a square cross section and is sunk half in the shaft and half in the hub of the other member.

The flattened, weblike part of a feather, consisting of a series of barbs on either side of the shaft.

The breakthrough idea was to grip the shaft from both sides, which made bearings redundant, he says.

The shaft shall be sealed with resilient grit seals in the body bores.

When radial load is applied, the active bearing can suppress the displacement of the shaft, thus obtaining an infinite stiffness.

He peers down into the shaft. At the very bottom, maybe 20 feet down, a big ceramic pipe runs the length of the cellblock.

The shaft seal leakage, judgement and emergency measures of the final polycondensation reactor was introduced.

During angular acceleration of the shaft the stator coupling must absorb only that torque resulting from friction in the bearing.

To roll the shaft and, wear work parts, can be machined fix to eliminate caused by roller loosing finish coating is not working properly.

To roll the shaft and, wear work parts, can be machined fix to eliminate caused by roller loosing finish coating is not working properly.

Bearings allow the shaft to turn while permitting the housing to remain still.

In order to increase the using life of the transmission shaft, the fatigue strength of the shaft must be raised.

This fact does not contact the shaft seal surface, it is the sealing principle of polymer cooled to half molten state and forming the seal.

First you need the boring for the shaft, then install the stern tube into the stern frame, next fit the gun-metal or white-metal bush.

22 had delayed union of the shaft fracture, but only four of these needed additional surgery.

The shaft coupling refutes the transport mode to carry on the preliminary analysis comparison.

The drive software of the shaft angle synchro converter has been applied in a weapon automatic testing system.

The hardness of ball groove on the shaft largely influences life expectancy of a ball screw.

The saw bits are arranged on the shaft ends of the main shaft, and the hydraulic push rod i slinked with the main shaft.

Let the center of the global coordinates be chosen at the center of the shaft .

The shaft may be started by a clutch or stopped with a brake.

The maximum torque that the shaft can withstand without continuous rotation, while lead wires are disconnected.

The wall submersion in the west air shaft of Zhangji Coal Mine, is the key engineering of ensuring the shaft to satisfy production use.

The shaft, shell buckling, can appear be automatic adjustment, not to increase bearing burden.

a groove or furrow in cloth etc especially the shallow concave groove on the shaft of a column.

A helical gear pressed in No. 3 counterweight drives twin contra-rotating balance shafts in the shaft housing within the lower crankcase .

CCTV said about 100 rescuers were working to free the remaining trapped miners but a fire in the shaft was blocking their progress.

Make sure that the top roller bearing, the lubrication of the shaft seating.

The wheel is fastened to the shaft with a key, and the shaft is joined to other shafts with couplings.

Analysis of the example verifies that variable structure control method has a good effect on the vibration control of the shaft.

The pulse is produced optically , magnetically or mechanically whenever a given point on the shaft rotates past a fixed point.

Arrangements for disposition of the shaft, disc and blades are made with the erection and test department.

The next step is to test the strength of the shaft.

The problem of scaling in oilfield injection process is common. It can occur in the bottom and every part of the shaft.

A shaft pin is arranged on the movable vanes, and a spring is arranged on the shaft pin.

By mechanical analysis of the shaft of supporting wheel, a formula to calculate symmetrical cycle is derived.

On this particular turbocharger turbine wheel I used the inner races of two ball bearings to prevent the shaft from moving axially.

When the shaft and fill friction produce heat depends on Water Seal on the living water to fill the cooling water sealed circle!

Bearing this can compensate for rotation between the shaft and housing suitable The skew.

The device includes whipping friction welding tool that has shaft shoulder and the circumrotating probing head out from the shaft shoulder.

Gears are the nitriding process, high hardness and resistance, and the shaft installed in the collar with.

Wonder if that will keep a loose shoe lace out of the shaft.

gear will have an impact in the meshing process, the shock pass through the shaft and bearing to the gear box, which cause the vibration.

Introduce the processing and property analysis by improving on machining of the shaft hole on fixed body.

The function of foamed plastic plates is to improve the stress state acted on the shaft lining.

Based on the temperature distribution along the shaft, the natural gas hydrate formation depth of calculation model is further given.

Rotational deformation of the shaft will produce maximum deflection.

The mechanical seal is arranged between the shaft of the motor and the pump cavity.

This increased torque is then transmitted through the shaft G to the road wheels.

Be care adjusting the shaft of gearbox with motor and machine. Ensure every shaft install accurately and the gearbox operate in balance.

Problems found, we change a couple of teeth of the shaft bracket, a couple of teeth of the shaft bracket, all of pin changed.

The pumping also ensures sufficient lubricant on the shaft, reducing noise, and increasing lifespan.

Flywheels are always attached to the shaft that the pistons drive.

A crystal anchor is activated by plunging the sharp head into the ground, leaving the shaft freestanding.

The dynamically display of the shaft's movement and oil pressure have been implemented based on Windows GDI technology.

The shaft torsional vibration had been tested on the bed.

Basically, one should use five fingers to hold a Chinese writing brush and keep the shaft upright.

The previews are dynamic and adjust automatically to show your chosen profiles and their relative sizes and positions on the shaft.

gear can be set according to the original orientation and position of the shaft to prevent loading the wrong or missing equipment.

In the near future, the shaft connecting laptop screen with motherboard is likely to use FPC.

the shaft is also fixed with an eccenter whose rim is matched with a brake band.

Plus, you'll feel the enjoyable vibrations in the shaft of your penis.

The valve component matches the gap of the shaft hole of the cooker cover liner and axially has a certain floating distance.

You can also change positions of the torques. In the dialog box preview, drag the torque arrows to the shaft sections as shown on the image.

At about 3: 30 a. m. , someone outside the shaft told them the ventilation system had broken down and told the miners to try to escape.

Balancing shaft is the shaft with an eccentric weights.

Two pairs of friction wheels and two pairs of electric generators on the shaft of motor are engaged with car wheels.

There are no bearings to fail or requirements for flexible couplings because its magnetized drum assembly is attached directly to the shaft.

The counterweight and the shaft top propulsion machine are clearly seen on the left side when facing the elevator door.

At operation, the ejecting rod rotates with the roll, the shaft and chute boards maintain static.

The second guard was still gaping in confusion when Frenya grabbed the shaft of his spear.

The thrust bearing has ample capacity to support the weight of the shaft and impeller.

The question about reinforcing all or a portion of the shaft has triggered heated debate.

The pump can start water drainage task once the motor connected with the shaft coupling is started up.

Others say the shaft may be sufficiently stable to make the installation of pipe unnecessary.

the shaft and gear transmission caused by torsion instability and latency that enhances the position of the drift and gear ink.

It shows good chemical resistance, high elasticity and very low cold flow. It is wear resistant but no harm to the shaft.

This type of bearing supports the shaft on a thin layer of oil that is constantly pumped around the shaft.

Attached to the input shaft , the disc turns at the speed of the shaft .

Securely attached to the shaft is a flange to facilitate a friction fit placement on the rim.

A train arrived at the station below, pushing oxygen up the shaft and further fanning the flames.

Will the shaft made by one machine shop fit the bearing made by another machine shop using the tolerances specified?

The shaft of an arrow is made of alloy material.

One end of the shaft is fixed with the blade wheel.

The most important part of the balancer is the shaft, which must be dead straight and have ends which are precision ground.

The shaft seals adopt generally soft gland packing. It can be fitted mechanical seals to meet the special requirements.

These disks are laminated on the shaft to build up the armature.

Engineers will then prepare the platform above the shaft from which they will lower a specially designed rescue capsule into the mine.

cleaning sludge and dirt outside transmission, front and rear to protect the shaft.

proposed the results-guaranteed approach for extending the service life, and the calculation methods for determining the shaft size.

In this article, the focus of the shaft design and checking are discussed.

Where needle bearings are used, tape the bearing retainers to the shaft to avoid losing needles.

Splines are permanent keys integral with the shaft, fitting in keyways cut in the hub.

I believe this is happening during fast, chunky rock gardens and larger drops where the shaft speed overtakes the LSC circuit.

The gas pressures of combustion are used to rotate the shaft.

removed the shaft correction or replacement of the new shaft.

The shaft extension should be maintained at a safe range in order to avoid critical speed at rotor bending modes.

However , under heavy load the shaft may deflect excessively .

Use the OLD PLANK from inventory on the shaft and proceed forward into passage.

Generally, two screws are placed in the hub : one screw bears on the key and the other bears on the shaft.

The system satisfies the production units' demand that it can monitor the shaft working state completely, real time and chronically.

The officer concerned in the shaft surface water the amount of radiation measured over 1000 mSv per hour.

with rollers and water roll the shaft and bearing wear deformation or damage.

It's just in case the rubber band slips off the shaft.

while the shaft may be made from bamboo, ivory, jade, crystal, gold, silver, porcelain, sandal, ox horn, etc.

After the pump stopped, if there is liquid leakage on the shaft seal, adjust the filling press cap until on leakage occurs again.

Heat in the gland comes from friction of the packing on the shaft.

To display the shaft preview on the Design tab, click the Options button.

Wind turbine operating environment is very harsh, which has high demand on the shaft load capacity.

While designing a shaft using the Shaft Generator you can preview the shaft in both the dialog box and the graphics window.

Dry gas seal, which is end-face seal with lower leakage, is gas-lubricated without contacting with the shaft.

The shaft and discs rotate at about forty revolutions per second.

This is due to the shaft being bent and the gear itself is not sitting perpendicular to the shaft.

Because the shaft necks whirligig with high speed under high pressure, the shaft necks and bearings endure intense attrition.

The shaft is a cylinder, makes with the wood or the bamboo, inlays divination in the arrow.

Nine men were trapped in a nearby mine when the shaft flooded.

When they emerged from the shaft they encountered Ezuri, leader of a band of Mirran rebels.

propeller blades that rake backward from the shaft; rake a ship's MAST.

Provides 30 degrees of adjustment to align the signal outputs to the shaft position.

The shaft of Fig. 3-33 is simply supported at A and B and is keyed against rotation at A.

In addition, the shaft must possess a strength required as a drive shaft.

Karen was leaning into the shaft yelling Jack's name.

The shaft and the bearing's inner race rotate together, while the outer race and the transmission's housing are stationary.

The more general case, when the shaft rotation may be significant, is dealt with in chapter 6.

You can select the shaft sections with the 2D preview in the dialog box, the graphics window, or with the tree control.

Put the wheel to the shaft, don't extrude by force.

The shaft coupling should be tested by technical checking department of the manufacturer, and make the qualified certificate.

Impeller pump installed in the Shell 2, 3 and retention in the shaft, the shaft driven directly by the motor.

The shaft is flexible and modeled by using the finite element method that can take the effects of inertia and shear into consideration.

Moreover, the shaft is deviated from the spin axis.

Three times he struck the shield with the shaft.

The shaft transmission.

The shaft also shall have a directional indicator on top to indicate disc position when the handle is removed.

If you twist the shaft in one way it becomes a ballpoint pen.

The shaft is a brass rod (6mm diam. ) mounted with two needle bearing.

Select the plane in the shaft where bearing will be mated.

I just think look the different in the shaft angle.

The shaft is coupled in a shell.

Fixed the track in the shaft side to prevent the sedan theater box rocking.

Therefore, increasing the rock drivage speed has the most inportant meaning to accelerate the shaft building.

In addition, it will also investigate the sewage leak into the shaft way.

"Not only can they turn the shaft but they can lift it as well, " says Dr Anderson.

The shaft now feels like a big round rubber band.

and select the shaft face in the assembly.

On August 5, the shaft of a gold and copper mine in Chile caved in, trapping 33 miners 2, 300 feet underground.

Jack directed his light down into the shaft and asked Karen and Gnea to do the same.

A splined hub has grooves that match splines on the shaft .

A cowl (48) surrounds the lip with clearance when the shaft rotates.

To make the shaft turn, the muscles work in concert, rhythmically contracting, one pair after another.

Because the machine is a different model, payoff a difference of an outside diameter of the shaft, normally at 3, 6 or 12 inches.

The shaft turns about its axis.

She got the gold mine, he got the shaft.

The shaft inclines almost 30 degrees.

The drive sprocket (60) has a central opening (29) for receiving the shaft.

There is 2CY gear pump series pump body, cover, gears, bearings and the shaft sealing etc.

Clamps in the shaft rear part.

Because the SL56 occupies only 0. 75 inch of the motor shaft length, a brake, pulley, gear box, or coupling can also be placed on the shaft.

The second shrink fit (9) allows greater torques to be transmitted from the gear (4) to the shaft (2) than the first shrink fit (8).

It could see the shaft of the tool, and the hand wrapped around it, and the gradually-deepening water.

Our team got the shaft on that call.

The main wheel (6) is fixed on the kick plates (2) via the shaft (7).

They can break the brush head off and sharpen the shaft in seconds.

Do you mean the shaft will run against the bush?

On the other hand, if a required speed change demands a certain type, the shaft positions will also be fixed.

According to vibration theory, the polishing material machine can not work in gear because of eccentricity in the shaft.

the two fixed framework formed by the two circular dials is provided with a guide way adapting to the shaft hole of the engine cylinder;

both ends of the shaft lever are respectively provided with an axel bed which is fixed in a groove between the upper and lower shell bodies;

symmetrical handles are arranged at the side edges of the plate bodies near the shaft;

within the shaft is installed of torsion spring, ends of two sides thereof each is connected with fan shape piece on two outward side;