tear strength

It has a better flex cracking resistance than those of natural rubber but a lower tear strength and a higher dynamic modulus.

It has a very high tear strength, high abrasion resistance and is extremely resistant to oils and greases.

Nano-scale silica is used to be added to formulation of material improving mechanical strength greatly, especially tear strength of SIR.

But it is better than the leading-products of synthetic rubber-SBR polybutadiene rubber in tear strength tensile strength and tackiness .

Calcium carbonate filled rubber, sulfide rubber, can be higher than that of pure tensile strength, tear strength and wear resistance.

The cause leading to deviation of tear strength in measuring tear strength of silicone rubber vulcanizate was analyzed.

TEXTILES. TESTING WOVEN FABRICS. DETERMINATION OF TEAR STRENGTH UNDER LIVE FORCE. INITIATED TEAR. (LOW CAPACITY DROP HAMMER).

Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance.

TEXTILES. TESTING WOVEN FABRICS. DETERMINATION OF TEAR STRENGTH ON DYNAMOMETER. INITIATED TEAR.

VULCANIZED OR THERMOPLASTIC RUBBER. ANALYSIS OF THE MULTIPEAK TRACES OBTAINED WHEN DETERMINING THE ADHESIVE STRENGTH AND THE TEAR STRENGTH.

Flexible cellular polymeric materials. Determination of tear strength.

The results showed that the tensile strength, elongation at break and tear strength increased with the OMMT content increasing.

Textiles. Testing woven fabrics. Determination of tear strength on dynamometer. Nail tear.

Textiles. Testing woven fabrics. Determination of tear strength under live force. Nail tear.

Products, the tensile, tear strength, hardness and other mechanical properties are markedly improved.

Rubber- or plastics-coated fabrics. Determination of tear strength. Part 3 : trapezoidal method.

Footwear -Test methods for outsoles - Needle tear strength.

Footwear - Test methods for uppers, lining and in socks - Tear strength.

The tensile strength, elongation at break and tear strength of TAIC were higher than those of PDM while the compression set was opposited.

Results: The tear strength of SY-1 silicon rubber was better than that of MDX4-4210 silicon rubber.

By blending SSBR with NR, not only the processability of SSBR improved, but also the tensile strength and tear strength increased greatly .

There lie some correlations among mechanical properties. In this paper, we will take tear strength for example to discuss this correlation.

the coupling agent A-172 had a more significant modifying effect and gave EPDM vulcanizate much higher tear strength;

the tear strength, abrasion resistance and H pull-out of vulcanizate increased;

Rubber, vulcanized or thermoplastic--Determination of tear strength (Trouser, angle and crescent test pieces)

Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

Rubber and plastics-coated fabrics - Determination of tear strength - Trapezoidal method

Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Physical testing of rubber - Method for determination of tear strength (trouser, angle and crescent test pieces)

The main influential factors'research of stitch tear strength for ultra-microfiber PU leather

The main influential factors'research of stitch tear strength for genuine leather

Rubber, vulcanized - Determination of tear strength of small test pieces (Delft test pieces)

Determination of tear strength of rubber elastomers and plastic film using Graves angle test piece with nick

Rubber, vulcanized or thermoplastic; determination of tear strength; part 1: trouser, angle and crescent test pieces

The Cause Leading to Deviation in Measuring Tear Strength

Formulating of recipe for increasing tear strength of low hardness silicone rubber

Effects of moisture and heat on tear strength of glass fibre reinforced asphalt shingles

Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes

Footwear - Test methods for outsoles - Tear strength

Footwear - Test methods for outsoles - Tear strength; German version EN 12771:

Test Method for Stitch Tear Strength of Leather, Double Hole

Development of Coloured CR Sheath with High Tensile Strength and High Tear Strength

Study on forming property and tear strength of RFL film for glass cord

Study on tear strength of the abraded denim

Test Method for Stitch Tear Strength Single Hole

Effect of cut on determination for tear strength of rubber

Test Method for Buckle Tear Strength of Leather