static load

The form of the supports is designed to be very reasonable to the static load, but its Seismic performance should be further optimized.

Let's visit a workshop with restricted access where static load tests of aviation equipment used to be performed.

A static load balancer allocates processes to processors at run time while taking no account of current network load.

The results of a practical example prove its validity arid accuracy when applied in parameter identification of static load model.

The observation group first group of static load magnesium sulfate, again at night, when necessary, to maintain muscle note.

The basic dynamic and static load ratings for the Solid Oil bearings are the same as for the corresponding standard bearings.

the actual displacement value subtracted by the pile top life value is the pile top displacement value of the pile top loading static load.

Currently, static load models are still popular used in power industry for transient stability analysis.

and the best effect of rock fragmentation will occur when an impact load is applied after a volume fracture due to the pre-static load.

During the simulation, the paper simulates the actual situation as more uniform as possible with static load and dynamic load.

If a static load acts in different directions on a bearing, the magnitude of these components will change.

A static load is a gradually applied load for which equilibrium is reached in a relatively short time.

Packaging - Complete, filled transport packages and units loads - Stacking tests using a static load.

First of all, the foundation of the buildings is detected to giving a pile press, and this test is Static load test.

The condition of soft switch in all range of different static load is illustrated by the simulation method.

In this paper, optimal multiplier newton method of load flow solution with static load characteristics is presented.

The static load test determining to measure the bearing capacity and deformation index is the most direct and effective way.

In this case, this paper researched on the clustering of data for load modeling and the modeling of the static load.

With the abasing of the stratum static load, the bulk of the core sample come into expansion.

Please be cautious not to give excessive static load or shock to switches.

under fixed dynamic load, static load has a little effect on fractal dimension values.

The curve panel was corrected by static load test and the performance of seat suspension was evaluated by dynamic test.

In this paper, notch sensitivity of a low-carbon bainitic steel under static load has been studied.

Aerospace; rivet design values static load, for countersunk rivet joints, single shear, dimpled; rivet material 2.

Aerospace; rivet calculation values static load, for universal head rivet joints, double shear; rivet material 2.

Gravel pile; Composite foundation; Static load test; Pile-soil stress ratio.

The smaller of the two values represents the maximum static load.

Self adhesive tapes. Measurement of elongation under static load.

Aerospace; rivet design values static load, for countersunk rivet joints, single shear; rivet material 2.

Aerospace; rivet design values, static load, for universal head rivet joints, single shear; rivet material 3.

The whole process of static load analysis for the crossed roller slewing bearings has been simplified.

Study the relationship between voltage stability and synchronism stability based on the classical static load model.

The static load tests include: static deviation test and static strain test.

Aerospace; rivet values static load, for universal head rivet joints, single shear; rivet material 2.

One 4-story R. C. frame structure model with broad-limb T-shaped column is tested under low cyclic and repeated static load.

Meanwhile dynamic analysis of pile bearing capacity has to be modified according to the static load testing which is ruled by codes.

Lastly, we compared the 3D map with deformation modulus of composite foundation static load test to prove the effectiveness of 3D test.

After the conical elements have been deflected under static load for 48 hours, the laden height (H1) see fig 2, should be measured.

Time effect of wet drilling pile is investigated through the static load experiment on pile No. 22 of Guanhe Bridge.

Aerospace; rivet design values static load, for countersunk rivet joints, single shear, dimpled; rivet materials 3. 1124 and 3.

Aerospace; rivet design values static load, for countersunk rivet joints, double shear, dimpled; rivet materials 3. 1124 and 3.

Aerospace; rivet design values, static load, for universal head rivet joints, single shear; rivet materials 3. 1124 and 3.

It is also can do the testing of desk, chest vertical, horizontal static load.

Key factors affecting the test result of static load - deflection of damping rubber components

Rolling bearings; airframe bearings; characteristics, boundary dimensions, tolerances, static load ratings

Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)

Engineering Applications of A New Static Load Testing Method for Piles with Large Bearing Capacity in Bridge

Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings

Chaotic Optimization Strategy Used in Parameter Identification of Static Load Model

Machine tools; determination of the ratings of presses for sheet metal working under static load; mechanical presses

Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load

Aerospace; rivet calculation values, static load, for close tolerance bolts of titanium alloy, with countersunk head, single shear

Study of Influences of Steel Wire Strands on Static Load Anchoring Tests for Clip Type Anchors

Aerospace; rivet calculation-values, static load, for close tolerance bolts of titanium alloy, with protruding head, single shear

Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction

The Equipment and Application of Integrative Parameter Calibration for the Dynamically Static Load

Study of Static Load Test and Result Analysis of Compound Foundation for Stone Columns

Linear rolling bearings; dynamic and static load ratings; linear guides without rolling element recirculation

Aerospace; rivet calculation values, static load, for close tolerance rivets of steel, with countersunk head, single shear

Static Load Tests on A Semi-supported Arch Bridge: A Case Study of Yinhe Bridge

Test Methods for Static Load Test for Combined Tensile and Transverse Load Resistance of Panel Wall Systems in Building Construction

Study of Static Load Tests of Parallel-Type Combined Highway and Railway Bridge

Introduction of Intelligent Anchorage Assembling Fittings Static Load Testers

Through the test of pile static load test, the pile self balanced load test pile soil load transfer characteristics;

Aerospace; rivet calculation values, static load, for close tolerance rivets of steel with universal head, single shear

Research on static load balancing strategy of paralell computing of the data-irregular problems

Packaging - Complete, filled transport packages - Stacking tests using static load

Agricultural machinery - Determination of playload, vertical static load, axle load - Rigid drawbar trailer, drawbar trailer

Static Load Test and Carrying Capacity Forecast for a King Pile in Subway Station

Adhesives for non-structural wood applications - Test method and requirements for resistance to static load

Aerospace; rivet calculation values, static load, for blind rivets with countersunk head, single shear

Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load

Comparison of bearing capacity of composite foundation between static load test and dynamic sounding test

Analysis of comparing high strain dynamic in engineering inspection with static load experiment

A Study on the Influence of Air Force upon the Static Load Characteristics of Front Shock Absorber

Rolling bearings - Static load ratings; Amendment 1: Annex A (informative) - Discontinuities in the calculation of basic static load ratings

Static load test could be directly conducted on this device;

Surveying Technique and its Application in Static Load Test of Large Bridge

Strengthening and Static Load Testing to a Stadium Bleachers

Equivalent Static Load Calculation Method of Structure Subjected to Internal Explosion

Determination of static load resistance of wood adhesives to increasing temperature

Static Load Test and Theoretical Analysis of a Cable Bridge

Study of Static Load on Molded Pulp Buffering Structure Unit

Timber structures - Test methods - General principles for static load testing

Static Load Test to the Simple Bearing Plate-girder Bridge of Prestressing Force with Oblique Crossing

Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

Analysis on Non-uniform Settlement of Composite Foundation under Horizontal Static Load

Analysis on the Static Load Pulling up Experiment of Big-diameter Expanded Fundus Pile With Manual Dig Aperture

Improvement of the Power System Static Load Margin Using FACTS Technology

Discussion of the anchor pile static load experimentation on the impact of anchor pile

Aerospace; rivet calculation values, static load, for blind rivets with flat head, single shear

Determination of Vertical Bearing Capacity of Large Diameter Belled Pile by Two Static Load Methods

Fatigue and Static Load Strength Analysis of Titanium Circularly-Grooved Cooling Tube

Application of dynamic and static load models to transient stability calculation

Experimental research on static load and live load of pre-stressed concrete continuous box beam bridge

Design and Construction Plan of Pile Foundation Static Load Test for Bridge of South-North Water Transfer

power system; voltage stability; static load; dynamic load; voltage index;

Techniques for Static Load Test on Rock Foundation and Adaptable Conditions Analysis

Forecasting Ultimate Bearing Capacity of Singe Pile with Static Load Experiment

Analysis of Some Problems in the Static Load Test of a Composite Foundation

Static load test and simulation analysis of steel concrete beam bridge of prestressing force

Analysis of Static Load Test Option Comparison of Prestressed Concrete Hollow Slab Beam

Primary study on single-pile horizontal static-load experiment and parameters in result

Analysis of Comparing Static Load Experiment with Large Strain Test for Pile Foundation

Field Static Load Test and Finite Element Analysis of Prestressed Concrete T-section Beams,

Static Load Exploration Analysis and Reinforce project design of Tashanshahe Concrete Double bending Arch

Analysis on Single Pile Vertical Static Load Test Result in Superficial Part Hard Soil in Shanghai

Static Load Test of Bridge Structure and Its Application

Linear rolling bearings; dynamic and static load ratings; linear motion recirculating ball bearings

Adhesives - Determination of the time to rupture of bonded joints under static load

Linear rolling bearings; dynamic and static load ratings; profile rail guide recirculating ball bearings

The results show that martensite nodular cast iron has best wear resistance with static load;

Response Analysis of Vibration on Nonlinear Elasticity Beam under In-line Static Load

Static load experimental investigation to model of cable- strut portal frame

Study of static-load testing of pile with groups of bolts

Research on Static Load and Fatigue Test for Steel - concrete Connector Model on New Chongqing Shibanpo Yangtze River Bridge

Study on subsiding test of backfill soil in tank base of vertical fluid-storage tank under static load

Three-dimensional simulation calculation of skew box girder and static load test

Non-liner Vibration of Circular Plate Subjected to Static Load on Elastic Foundation

Application of ANSYS program in static load analysis of lidar servo rotate equipment

Bearing Properties of Large Diameter Bored Cast-in-situ Friction Piles under Static Load

Static load test for prestressed reinforced concrete slab of highway bridge

Approach to Static Load Test Method of Clamping Piece Type Flat Anchorage with Deflection Angle

Improvement of Static Load Test Technology for Polar Crane in Ling'ao Nuclear Power Station

Laser Measurement Method for Beam Section Deflection in Bridge Static Load Test

Safety Analysis on Static Load Test for Composite Foundation of Cement-soil Mixing Pile

Inspection and rehabilitation of static load test and simulation for RC slab bridge

An Analytical Solution of Settlement-Time Relation on Single Pile under Static Load

Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)

Static Load Experiment on Prestressed Inclined Plate Bridge

An Experimental Study on the Beam Structure with Bonded Steel Plates under Static Load

A Study of Static Load Testing Method for New Bridge

Analysis on Static Load Test for Composite Foundations of Cement Deep-Mixing Piles

Research on the Vertical Dynamical-Static Load Tests for Single Piles in Soft Ground Zone

Selecting bearing size using the static load carrying capacity - Equivalent static bearing load

Road vehicles; Caravans and light trailers; Static load on ball couplings

Application of bridge base pile static load test in traffic track testing section

Specification for static load ratings for rolling bearings

Self adhesive tapes - Measurement of elongation and static load

The Static Load Performance Research of Dynamic Radial Bump Foil Bearing

Basic static load rating of single bearing, or bearing pair (see product tables), kN

Selection of Tested Spans for Dynamic and Static Load Tests of Multiple-Span Bridge

Testing Program for Prestressed Hollow Board Roof Beam with Static Load

Analysis of Static Load Test of Tension Pile Bored in Permanently Frozen Ground

Necessity of Single Pile Dynamic and Static Load Test in Pile Foundation Design

Static Load Experimental Analysis of the Piled Foundation of Yaohete Bridge

Static Load Tests of Suifenhe River Rotational Cable-stayed Bridge

GA Applied in Inverse Problems of Elasticity Structure Static Load

Static Load Test on Pile of Bridge and Interrelated Parameters in Stress Wave Test

Static Load Tests for Pile Foundations of 500 kV Transmission Line Towers of Left Bank Power Station, Three Gorges Dam

Testing method for bearing capacity of soil for static load on spread footings

Result Analyses Of Bridge Hollow Board Static Load Experiment

Numerical Simulation of Sliding Plug Door on the High-speed Train under Static Load

Establishment of Static Load Curve of Turntable Bearings

Static load test and its analysis of 20 m-span prestressed concrete hollow slab

Changes in energy metabolism of static load-induced muscle injury

Study on Static-Load Test of Compound Ground with Tubular Piles of Expressway

Analysis of Effect on the Deep Mixed Pipe Bearing Capacity Through Static Load Tests

Static Load Test and Finite Analysis on Bridge Steel Deck Plate and Pavement

Analysis of static load test failure criteria on pile foundation

Exploration of Prestress Concrete Slab and Beam Static Load Test

The Application of Artificial Neural Network in Static Load Test

Elimination of oil whip online by additional bearing static load

Rolling stock -- Test methods of static load for body structures

Aerospace; rivet design values, static load, for flush head rivet joints, double shear, dimpled, rivet material 3. 1324, metric series

Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 2. 4360, metric series

Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 3. 1124, metric series

Aerospace; rivet design values, static load, for protruding head rivet joints, double shear; rivet material 2. 4360, metric series

maximum authorized static load on coupling device

Analysis on influence of static load upon steering of submarine

Research on Analyzing Methods of Curve for Test Piles under Static Load

Static Load Test for Shear Resistance of Framed Walls for Buildings

Experiment and research of static load on big diameter and long bored pile

The changes of serum enzyme in worker muscle injury induced by static load

Practice of Horizontal Static Load Test on Balcony Railing

A research over static load test of anchorage zone for inclined cables

Effect of static load on energy metabolism of rat's isolated skeletal muscles

road vehicles - static load for trailers in operation

Dynamic modification of static load model's exponents

Automatic Loading Calculation and System of Static Load Test Vehicle

The Method of Static Load Test and Load Transmission Mechanism of Bored Pile

Analysis on static load check - up curve of bolt static pressure pile

Discussions on the factors of Large -tonnage static load test

Application of Static Load Test in Bridge Pile Foundation

Static Load Test Research on Prestress Voided Slab Girder

Assessment and Analysis on Field Static Load Tests of Bridges

Static Load Test of Concrete-filled Steel Tubular Arch Bridge

Static Load Test for Wharf Foundation Pile of Shanghai Port Waigaoqiao Port Area Phase IV Project

Doorsets -- Diagonal deformation test under static load

Analysis of Static Load Sharing in Planetary Gearing

Big Static Load Test on the East Tower Pile Foundation of Humen Bridge

Dynamic and Static Load Experiment of Xitang Bridge

Study on Dispersing of Static Load Model Parameters

Research on Static Load Test of Long Span Suspension Bridge

Study on Static Load Test of PC Hollow Slab in Construction Field

maximum design static load on coupling device

Studies on the changes of free radical and enzyme in damaged musclinduced by static load

Static Load Test of Chaoyanglingfeng Steel Pipe Concrete Arch Bridge

Analysing the problems involved in the control of PHC construction quality based on static load test

Analysis of static load test of large diameter dig-hole pile

Selecting bearing size using the static load carrying capacity

Analysis of safe loading area in bridge static load test

Calculation system of static load strength of welded joint

Dynamic and static load testing machine

Static Load Testing of Truss Assemblies

Development of Instrumentation of Static Load

Testing of textiles; determination of thickness loss of textile floor coverings at static load

Specification for static load test of rock and soil

Standard Test Method for Treestand Static Load Capacity

Static load ratings for rollingbearings

Static load test and simulation for RC arch bridge

machine Chair leg static load test machine

Standard Test Method for Static Load Limit

Design and Static Load Test of Improved Pile Tip Soil

Static Load Examination On 16-M Pre-stressed Concrete Hollow Plate Beam

Static Load and Dynamic Load Tests of Bridges

Safety Evaluation of Large-scale Space Frame Structure Based on Static Load Test

Practice on the pile base static load test

Test Method for Treestand Static Load Capacity

Static load rating of ball bearing

High-load: static load capacity of 250kg or more, the level of the most ultra-dynamic load Over 170kg;

Maximum static load of rotary

Static Load Test of PC Hollow Slab

Static load of freight cars

Method of static load test for bus top

static load test of pile