melting temperature

This high pressure was the cause of higher melting temperature and increased cooling time for plastic part.

The melting temperature and evaporation temperature are used to confirm the material's state during the laser drilling investigation.

Finally the melting temperature ranges of different components in the sample are tested by a differential heat analysis scanner (DSC).

The heat of fusion is the heat required to melt a substance at its normal melting temperature .

PLASTICS. SEMI-CRISTALLINE MATERIALS. DETERMINATION OF THE CONVENTIONAL MELTING TEMPERATURE BY THERMAL ANALYSE.

Analysis results demonstrate that when higher heating rate is applied, the melting temperature of copper nanowires becomes high.

Gel blends with the melting temperature of the salt ion concentration increases with increasing.

With the aid of GX High-Temperature Physical Function Determinator the melting temperature of coating was measured.

When one reaches the melting temperature, particles break free as the material melts away.

Thinning rare earth silicon can increase the melting temperature of coating and the hardness and wear resistance of welded metal.

There is no effect of the melting temperature on the compressibility of the thawed soil.

The results of TG-DSC indicated the addition of compatibilizer decreased melting temperature, improved thermal stability.

It can be seen hot melts melting temperature of the heating to strictly control, is not too high or too low ().

The difference between the gelling and the melting temperature is most likely caused by some kinetic effects.

Thellos device is similar to the CG-2 pressure-relief deviceexcept that it uses a fusible metal with a hellogher melting temperature.

It was found that poly(L-lactide)is thermally unstable above its melting temperature.

The melting temperature of HMLS and LS industrial PET filaments shows no obvious difference.

Calcite and pyrite in coal reduce ash melting temperature.

The influence of melting temperature and inclusion on hydrogen content is made.

f the temperature is above 0. 3 times the melting temperature then it qualifies warm forging .

I left two frozen in the refrigerator to eat later when the melting temperature, and the new do the same.

Study of a Low-melting Temperature Bioactive Glass for Dental Machinable Infiltrated Ceramic

Microstructure and Properties of a Machinable Glass Ceramic with Low Melting Temperature

Composition Study of Machinable Glass Ceramics with Low Melting Temperature

Influence of Melting Temperature on the Luminescence Properties of Bismuth-doped Barium Aluminosilicate Glasses

Determination of melting temperature range for precious metals and their alloys--Testing method of thermal analysis

Study on the Relation Between the Melting Temperature and the Cohesive Energy of Pb Nanofilms by Molecular Dynamics Simulation

Effects of Melting Temperature on the Tensile Properties of Weld Lines in Short-Fiber-Reinforced Injection Molding

Influence of interaction among agglomerative flux components on melting temperature of flux

The Calculation of Cohesive Energy and Melting Temperature of Metallic Nanoparticles

Relationship between Mineral Behavior in Coke and Ash Melting Temperature

Friction stir welding tools for high melting temperature materials

Lead in high melting temperature type solders (ie: tin-lead solders alloys containing more than 85% lead),

Lead in high melting temperature type solders (i. E. Lead-based alloys containing 85 % by weight or more lead)

Pressure Dependence of Melting Temperature of Rare Gas Solids

Molecular dynamic study on size dependent melting temperature of Pb nanofilms

High melting temperature type solders

Study on size effect of melting temperature of Pb nanowires

Nucleic Acid Melting Temperature and the Development of the Oligonucleotides Designer