base metal

The announcement triggered a brief rally in the base metal sector in London and Shanghai, sending tin prices up to 10 per cent higher.

She was holding a teaspoon in her two hands, pressing her thumbs against it as if measuring her strength against the base metal.

The surface condition (roughness) of corrosion test sample has a pronounced influence on the pitting resistance of the base metal.

Most of the heat affected zone retained original structure characteristics of the base metal, and only a fraction of the zone remelted.

Fibrous processing marks remain in the heat-affected zone (HAZ) with part of precipitated solid phase solved into the base metal.

cross , religious, of base metal, whether or not plated with precious metal to be worn on the person.

The conclusions show that the tensile strength of joint is not less than base-metal's, providing with fine ductility.

The microhardness is higher and grain size is smaller in weld bead zone, compared with the heat-affected zone and base metal.

Solid state and can be divided into a total resin and base metal.

The hardness of fusion zoon higher weld joint and lower base metal The hardness have no change at fusion depth direction.

Base metal both sides of welding to be preheating by oxyacetylene Welding & Cutting torches baking method.

Surface preparation of metal before chemical process. Removal of a layer of the base metal.

The interaction and interfacial combination between the intensifying phase and base metal were analyzed.

Many other precious and base metal deposits as well as industrial mineral deposits also are highlighted in the newly released reports.

The chemical and mechanical properties of the electrodes should be as similar as possible to those of the base metal.

Testing to these requirements will determine whether a cleaner or chemical is detrimental to protective finishes or base metal.

Ferrous tool materials have iron as a base metal and include tool steel, alloy steel, carbon steel, and cast iron.

The results showed that the strength of laser welded joints was increased and the elongation rate was decreased compared with base metal.

The mechanical properties of the weld deposit shall not lie appreciably above those of the base metal.

These small animals are likely eating the same kind of base metal production --- cesium radioactive material.

Boeing documentation describes the methods for detecting base metal damage while in service and during overhaul.

Fracture mode is predominantly ductile in base metal. However, there exists intergranular fracture in the weld metal.

Fracture toughness of heat affected zone (HAZ) was between the base metal and weld metal.

Operating in three major varieties of the two acid base, metal surface treatment, cleaning, sewage and clean use of chemical raw materials.

The microhardness of twin spot laser welded joint is higher than that of single spot laser welded joint, but lower than that of base metal.

Tensile strength and impact toughness of welded joints are slightly higher than that of the base metal.

The composite coatings are mechanically bond after arc spraying, but metallurgical bond after argon shielded arc remelted to the base metal.

Base metal prices (including aluminium) are falling in response to worries about economic growth.

The properties in weld deposit metal and Heat Affected Zone are strictly homogeneous with the base metal.

electrical conduit tubing and joints therefor, of base metal lined with insulating material.

When yield strength is equal to the base metal, the longitudinal residual stress is equal to the yield strength.

Other mountings, fittings and similar articles, suitable for buildings, of base metal.

elbow , of base metal, lined with insulating material , for electrical conduit tubing.

Base metal prices on average have risen 72. 8 per cent since the start of the year, according to the London Metal Exchange.

Through-thickness cracking also can lead to fatigue or stress corrosion cracking of the base metal beneath the plating.

BHP Billiton Ltd. , the world's largest mining company, retreated 2. 6 percent to 2, 292 pence as base metal prices declined in London.

The microhardness of weld metal zone, HAZ and base metal decrease in totality after heat treatment.

In this paper, Surface alloying process by V-EPC and application technique on guide were studied systematically, the base metal is ZG40Cr.

The hardness in fusion zone, heat affect zone and base metal was measured, compared and analyzed.

Both FZ and HAZ have higher microhardness than the base metal has, and microhardness in fusion centre zone is the lowest.

The electric connector includes base, metal elastic pieces of anode and cathode.

Filler materials: For welding, base metal matching filler materials shall be used.

In the process of welding, welding wire and base metal are melted together in high temperature and form transition in the bead.

WELD DEPOSIT SHALL BE WELL FUSED TO THE BASE METAL AND FREE OF VISABLE POROSITY IN CONTACT AREA.

The results show that its section has been divided into melting zone, heat influence zone and base metal.

Collecting pipe and fin are composite layer material, and the solder coated the base metal.

eyepiece of base metal for clothing footwear, awnings, tents or sails.

The transition of fracture mode from base metal to weld metal may lead to dramatic decrease in fracture toughness.

Rebuilding work is also likely to push base metal prices to new heights.

grip , meat or poultry, of base metal, plated with precious metal.

It was shown that the impact toughness of HAZ is 50% of base metal.

Increased concern about inflation is also driving the base metal rally.

Tensile test shows that fracture occurs to the base metal.

What is the matching filler metal classification for this base metal?

lower in value by increasing the base-metal content; of metals.

The AZ91D spot welded joint consists of nugget zone, heat effected zone and base metal zone.

The reinforcing material of the lower layer is fiber. The lower layer is solidified by the resin, which is used as base metal.

finger-plate, of base metal, for doors of buildings.

BASE METAL MARKETS LOOK TO 'DECOUPLING'

Thetransverse weld specimen is used together with the base metal or all weld metal tension tests to evaluate joint efficiency.

Energy and base-metal shares slipped 0. 2 percent and 2 percent respectively, despite stabilizing commodity prices.

Suitable for glaze with Zr , not suitable for the glazes with high base metal, Zn or B, can make colors with Zr System .

base coins of aluminum; a base metal.

The EM provides no information on base metal grades.

Base metal prices surged, with copper rising 10 per cent yesterday, nickel 13 per cent and zinc 7 per cent.

Fix plastics base metal base on the metope with ST4. 2 screws.

Modern science and technology from 1820, after the rise in natural resin base metal, carried out by sun exposure, forming a rough image.

Phrases & Expressions common to from hand to hand a base metal(non-precious metal) as well at the time of by oneself in circulation carry on

Investigation on Interface between Base Metal and Coating Made by Means of Vacuum Fusion Sintering

First, signs of a stabilising economic environment justify a cyclical recovery in base metal prices;

Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable

Precious or semi-precious stones (natural, synthetic or reconstructed )on a support of base metal, metal car-bide or cermet;

Methodology for methane capture and utilisation or destruction in underground, hard rock, precious and base metal mines

Influence of Mating Between Base Metal and Welding Material on Porosity Occurrence in Submerged Arc Weld Pipe Production

Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation

Manufacturing Technology of Multi-layered Ceramic Capacitor with Base Metal Electrode

Standard Test Method for Comparing EMF Stability of Single-Element Base-Metal Thermocouple Materials in Air

The Uncertainty Evaluation of Measuring Results for Working Base Metal Thermocouple

Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet

Advances in Base Metal Supported Catalysts for Methanol Decomposition

Study on the Microstructures and Properties of Iron-Base Metal-ceramic Braking Materials

Synthesis and Characterization of Novel Amino Acid Schiff Base Metal Complexes

Progress of Base-metal Multilayer Electrode Ceramic Capacitors

Bonding behaviors between enamel coating and base metal for sprayed porcelain pipe

Parts of general use, as defined in Note 2 to Section , of base metal (Section ), or similar goods of plastics (Chapter 39);

Synthesis and Characterization of Schiff Base Metal Complexes

The Effects of Machine-Alloying Process to the Ag-Base Metal Matrix Composite Material

Research of Property of TiC-base Metal Ceramics By using Underpressure Sintering Technology

Buttons of base metal, not covered with textile material

Effects of Investment Materials on Cast Shrinkage of Base Metal Alloys

Comparison of detection of reheat crack of base metal under cladding by using of various probes

afar cooling, the weld stresses drop, and lower than the both sides of the base metal;

base metal materials for fixed dental restorations

Research Progress of Plastic Base Metal Composite Pipes

Watch straps & parts of base metal

Electrodes, coated, of base metal, for electric arc welding

Claps, buckles & like, beads & spangles of base metal

the first layer is a primer coat to cover the bare base metal of the alloy

Development of technique of laser cladding carbide base metal - ceramic

Effect of cerium oxide on the adhesiveness of glass coating and base metal

Rivets, tubular, bifurcated of base metal

Of my Base Metal may be filed a Key,

Slide fasteners fitted with chain scoops of base metal

Weld and Base Metal Discontinuities

Wire, cored, of base metal, for electric arc welding

Accessories of base metal for furniture

amino acids schiff base metal complex;

Imitation jewellery nes of base metal

preparation of base metal for welding

Dental base metal casting alloys - Part 1: Cobalt-based alloys; Technical Corrigendum 1

Dental base metal casting alloys - Part 2: Nickel-based alloys

Hooks, eyes & eyelets of base metal

Weld, heat-affected zone and the base metal test

Bells, gongs & the like, of base metal

Base Metal of Plated Metal Strip

Iron & Low Carbon as Base Metal

Corks, crown, of base metal

63% Per cent of China base metal imports from Zambia

Watch cases of base metal