| 单词 | 圆度 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 释义 | 圆度 noun —roundness n (often used)less common: circularity n • convexity n See also:圆—circular • justify • tactful • spherical • (of the moon) full • unit of Chinese currency (Yuan)
|
轮形的圆度及轮轴轴承的磨损会影响精度，这些误差又会给传感器的精度带去影响。 solartronmetrology.cn | The roundness of the wheel and [...] wear on the wheel bearing affect accuracy and these errors should be added to the accuracy of the transducer. solartronmetrology.com |
它的圆度达 3.1µm，可执行 5 轴的同时控制加工，比传统机型的 圆度 大 约好 9 倍。 moriseiki.com | It achieves roundness of 3.1 µm for simultaneous 5-axis control machining, approximately 9 times better [...] than that of conventional models. moriseiki.com |
在审核过程中没有发现的原因，是因为孔是在0和90度测量， 而 , 圆度 是 最 差的位置是在45度。 shainin.cn | This was not discovered during [...] process audits because the bores were gaged at [...] 0 and 90 degrees, and the roundness was worst at a 45 degree angular position. shainin.mx |
此外，Precitech 还面向精密轴承、飞机和汽车行业生产用于测 量 圆度 、 垂直度、平面度和同心度的一系列相关计量系统和 OEM [...] 组件。 precitech.com | In addition, Precitech also produces a range of related [...] metrology systems and OEM components [...] measuring for roundness, squareness, flatness, concentricity [...]utilized within the precision bearing, [...]aircraft and automotive industries. precitech.com |
多个变形等级提高了无缝钢管的圆度 、 均匀性和表面质量。 sms-meer.com | The high number of forming stages [...] improves the roundness, the homogeneity [...]and the surface quality of the seamless tubes. sms-meer.com |
待焊接头, 公称管和卡套管材料的选择至关重要, 使用相同材 料, [...] 可保证相同的膨胀系数, 并降低不良焊接, 圆度不够或尺寸 变化（不利于良好焊接的）的可能性。 swagelok.com.cn | The choice of fitting, pipe, and tubing material being welded is critical Using the same materials will ensure the same coefficients of [...] expansion and will reduce the possibility of [...] poor welds, out-of-roundness, or dimensional [...]changes that are detrimental to a good weld swagelok.com.cn |
由耐高温尼龙制成的带轮，由于高度发达的模具和生产技术，在同等条件 的 圆度 和 运 行特点下，可替代钢带轮。 schaeffler.cn | The pulleys made from polyamide resistant to high temperatures are, due to the highly [...] developed tooling and production technology, [...] equal in terms of roundness and running characteristics [...]to the steel pulleys used as an alternative. schaeffler.us |
使用客户定义的测试模板,您可以清楚地看到球杆仪所测量的机床性能特性指标（如ISO230-4中 的 圆度 和 半径偏差、位置公差、垂直度、反向间隙等）随时间而变化的情况。 renishaw.com.cn | Using a customer defined test template to allow 'like for like' you can now clearly see how many of the machine performance characteristics measured by the ballbar (e.g. ISO 230-4 circular and radial deviations, positional tolerance, squareness, backlash etc) have varied over a period of time. renishaw.com |
与传统的滑块设计相比, 螺丝辊能降低弯曲力和卡套管的 椭圆度。 swagelok.com.cn | Steel bend shoes are required for select tubing, as listed on page 3. swagelok.com.cn |
不断引进和完善各项检测仪器，具有美国的光谱分析仪、英国TALY RO U N D 圆度 仪 和 TALYSURF轮廓仪，日本NTN的振动仪、捷克AVIKO探伤仪，日本尼康显微镜、波纹度分析仪等设备，通过先进的检测设备和技术，有效的指导生产和技术改进，为稳定生产和提高钢球的产品质量和寿命提供了有力的保障。 jgbr.com.cn | The introduction and improvement of the detection equipment, spectrum analyzers with [...] the United States, United Kingdom [...] TALYROUND roundness measurement and TALYSURF profiler, [...]Japan NTN vibration device, the [...]Czech Republic AVIKO detector, Japan Nikon microscope, waviness analyzers and other equipment, through advanced Testing equipment and technology to effectively guide the production and technical improvements, in order to stabilize production and improve product quality and life of steel balls provide a strong protection. jgbr.com.cn |
NHX10000 的圆度已达 到 2.1µm（配备刻度尺时），并且相比以前的型号，快速进给速度提高 [...] 2.5 倍（50 m/min），加 速度增加两倍多。 moriseiki.com | The NHX10000 has achieved roundness of 2.1 µm (when [...] equipped with a scale), as well as 2.5 times faster rapid traverse rate [...](50 m/min.) and more than two times faster acceleration than the previous model. moriseiki.com |
用户可在屏幕上看到创建的测量结果，并变化各种几何精度误差、运动误差和动态参数等，然后在屏幕上生成相应的球杆仪图形 、 圆度 和 位 置公差值的各种情况。 renishaw.com.cn | Allows the user to see the test results recreated on screen, and then has the facility to change various machine geometry, play [...] and dynamic parameters, to try 'what if' scenarios on the [...] ballbar plot and on circularity and positional [...]tolerance values. renishaw.com |
其结果是：磨削效率高、抛光的表面、直径公差小、 椭 圆度 低。 sms-meer.com | The results are high grinding performance, a polished surface, low diameter [...] tolerance and low degree of ovality. sms-meer.com |
使用 Creaform [...] 工具生成油罐检测报告，该工具提供了有用信息，如底部剖面、垂直剖面和 失 圆度 剖 面 ，这些都是评估沉降罐的基本信息。 creaform3d.com | The tank inspection reports generated with the Creaform tools provide useful [...] information such as bottom profiles, vertical [...] profiles and out-of-roundness profiles, that [...]is essential information to assess tank settlement. creaform3d.com |
ISO 1101要求的形状特征如圆度、圆柱度、 直线度、平行度等等形位偏差，形状测量仪均能对其进行测量监控。 mahrmeteringsystems.com | ISO 1101 calls characteristics such as roundness, cylindricity, straightness, parallelism, etc. deviations of form and position. mahrmeteringsystems.com |
Creaform 的 Handyscan 3D 激光扫描系统会生成现有部件的高精度 3D 数据 该系统会捕捉每个细节（最高精确到 40 微米），同时会反映出制造（如焊接接头、 失 圆度 ） 或 使用期限内（如损耗或凹陷）该部件所产生的所有变化。 creaform3d.com | Creaform’s Handyscan 3D laser scanning system generates high-accuracy 3D data of the existing part. It will [...] capture every detail up [...] to a 40-micron accuracy, and will reflect any and all changes undergone by the part during manufacturing (ex.: welded joints, out of roundness) or operating life [...](ex.: wear or dents). creaform3d.com |
多变量图显示在加工工艺中，在初始加工过程的钻孔处都有轻微 的 圆度 不 合 格的状况。 shainin.cn | Multi-vari testing on the block machining process showed [...] a slight out-of-round condition appearing [...]in the rough machining operation on all bores. shainin.mx |
挠性规通常是测量移动材料，如圆度 检 测 的最佳解决方案，Orbit 设置为极高分辨率和快速数据传输。 solartronmetrology.cn | Flexures are ideal for very high volume and high precision applications such as bearing component gauging. they are often the best solution for measuring moving material, such as roundness testing, with Orbit set to very high resolution and fast data transmission. solartronmetrology.com |
一般而言弯管加工时，该管件弯曲部的外侧部位呈拉伸变薄，内侧部位成挤缩现象，为防止管件于小弯曲半径的加工过程被拉断或破裂，我司加强送料机构以正向辅助推送管件，搭配强力侧向辅推(导模辅推)机构，以有效减少管件于小半径加工过程中，产生拉断或破裂之现象，该辅助推力须可配合弯曲速度、材料特性、弯曲角度作调整，将我司数十年弯管经验数值化于程式中，减少试模时间已达最佳生产效率，获得最佳弯管品质，提高 真 圆度 与 降低肉厚减薄率。 ylm.com.tw | In general bending process, tube wall thickness at outer angle turns thinner due to material elongation, and wrinkles at inner angle by material squeeze. In prevention tube deformation/breakage of tight radius, YLM tube bender equips rear booster force, with assistance of side boosting (pressure die booster), which can be adjusted in accordance with bending speed, material nature, bending degree, etc. YLM has implemented years of bending [...] experience into bending programming, in promotion of [...] productivity, tube ovality, as well as decrease wall reduction successfully. ylm.com.tw |
2007 年 11 月，教科文组织主持了第四次职业发展年 度圆桌会议，来自 53 个国际组织、联合国和欧洲各组织的 90 个职业发展从业者参加了会 议。 unesdoc.unesco.org | UNESCO hosted the fourth annual Career Development Round Table in November [...] 2007, which was attended by 90 career development [...]practitioners from 53 international, United Nations and European organizations. unesdoc.unesco.org |
为 1.A.、19.A.1 或 19.A.2 所述系统设计或改进、且其导航精 度(圆 公算 偏差)为 200 米以下的“整合式导航系统”。 daccess-ods.un.org | A.2. and capable of providing a navigational accuracy of 200 m CEP or less. daccess-ods.un.org |
2011 年 [...] 10 月，乌克兰安全局在乌克兰雅尔塔组织了由乌克兰和北大西洋 公约组织专家出席的网络防御年度圆 桌 会 议。 daccess-ods.un.org | In October 2011, the Security Service of [...] Ukraine organized and conducted in [...] Yalta, Ukraine, the annual round of talks on cyberdefence [...]by experts from Ukraine and [...]the North Atlantic Treaty Organization. daccess-ods.un.org |
直径4.2mm的小锥度圆锥状愈合基台是用于二次手术种植体暴露以后形成牙龈袖口的，或者也可以选择一次性手术直接连接愈合基台。 sic-invent.com | The concave anterior gingiva shaper with a 4.2 mm diameter is used for forming the gingiva following implant exposure or, alternatively, with transgingival healing. sic-invent.com |
高精度圆柱滚 子轴承和三点接触式球轴承适用于高温高速运行。 schaeffler.cn | High-precision cylindrical roller bearings and three-point bearings suitable for very high temperatures [...] and speeds. schaeffler.us |
轴承的内外圈必须在整个厚度，圆周 范 围内得到足够的均匀的支 撑。 schaeffler.com | Bearing rings must always be rigidly and uniformly supported over [...] their entire circumference and width. schaeffler.com |
您可以使用皮肤功能快速便利得定义r.a.d.toolbar的外观，包括透 明 度 、 圆 角 、 上下文敏感样式等。 evget.com | The appearance of r.a.d.toolbar can [...] be easily customized through skins to [...] include transparent rounded corners, context [...]sensitive styles, etc. There are numerous [...]predefined skins provided with the distribution of r.a.d.toolbar. evget.com |
因此，庭长指出常 任法官与审案法官在服务条款和条件上的差别没有理由继续存在，应从 实现公平和圆满执行完成工作战略的 角 度 出 发 加以解决。 daccess-ods.un.org | The President therefore notes that the continued differences in the terms and conditions of service of the permanent and the ad litem judges are no longer justified and should be addressed in the interest of both equity and the successful implementation of the completion strategy. daccess-ods.un.org |
为了促进机构间合作和分享职业领域的最佳作法，教科文组织于 2006 年 11 月主办了 第三次职业发展年度圆桌会 议，来自 53 个国际组织（包括联合国各机构、基金会和计划、 [...] 联合国秘书处、联合国维和特派团和欧洲各组织）的 87 名职业发展工作者与会。 unesdoc.unesco.org | In order to facilitate inter-agency cooperation and the sharing of best practices in [...] the career domain, UNESCO [...] hosted the third annual Career Development Round Table in November [...]2006, which was attended by [...]87 career development practitioners from 53 international organizations (including United Nations agencies, funds and programmes, the United Nations Secretariat, United Nations Peacekeeping Missions and European organizations). unesdoc.unesco.org |
在同一问题上，为 [...] 达到联发援框架的目标效果，教科文组织已组织其财务和技术合作伙伴召 开 圆 桌 会 议，讨论 专业培训问题，联合国系统的所有分支机构、其他技术合作伙伴（地区、学校和投资机构代 [...] 表团、共和国机关、政府、驻尼日尔的外交团体和国际组织代表、尼日尔私营部门和民间社 [...]会代表）等均参加了会议。 unesdoc.unesco.org | Pursuant to that UNDAF effect, UNESCO held a [...] vocational education round table for technical [...]and financial partners, which was attended [...]by all agencies of the United Nations system and other technical partners (countries’ delegations, institutions, funding agencies, State institutions, the government, representatives of the diplomatic corps and international organizations accredited to Niger, Niger’s private sector and civil society representatives). unesdoc.unesco.org |
英汉双解词典包含2273206条英汉词条，基本涵盖了全部常用单词的翻译及用法，是英语学习的有利工具。