fuzzy control

The output was observed to fluctuate with time due to the discontinuous nature of the FAM rules, inherent in fuzzy control.

CRI method has been used to deduce the fuzzy control rules and it was combined with PI control by the harmony gene.

The changeable phase fuzzy control method proves to be very efficient for the intersection with changeable traffic flow.

The presented fuzzy controller is based on TSK fuzzy model, guarantees the stability of overall fuzzy control system, and easy to implement.

A self- organized fuzzy control system used for a dual wavelength frequency stabilized CO2 laser with high precision is presented.

The paper use the way of fuzzy control to let the oil pumps'number of stroke in a proper range.

This thesis proposes a robust adaptive fuzzy control scheme for the uncertain nonlinear time-delay systems preceded by an unknown dead-zone.

The system fuzzy control form can be obtained by the fuzzy system input, and fuzzy calculate with the given system control form.

The structure and characteristic of the electronic throttle is introduced in this paper and a fuzzy control algorithm is presented.

A multivariable fuzzy control strategy was proposed for the heat setting machine in post-procedure of printing and dyeing industry.

This article presents a multimode control system based on the concept of the variable-construction adaptive and hierarchical fuzzy control.

In this paper, fuzzy control is used to control a vertical rotary invert-pendulum with single fulcrum due to its complex characteristics.

Fuzzy control technology is adopted to realize constant current control, and a simulation research of the controlling process is also given.

The Compensated Fuzzy-Neural network algorithm and the rules of the fuzzy control are applied to the system.

From some means, fuzzy control rules are good or not will directly affect capability and character of the control systems.

The latter method can be applied to the fuzzy control of the quadruped robot's servo system and has a good effect.

Design of the fuzzy control system over the body vibration of diesel engine.

Thus, it has vital significance to research the application of fuzzy control for the control system of the hydraulic simulation turntable.

The paper presents the application of the fuzzy control theory of artificial intelligent to an inverted pendulum control system.

A multiple sliding mode adaptive fuzzy control scheme was proposed for a class of nonlinear systems with mismatched uncertainties.

The fuzzy control strategy can adapt the change of load structure and parameter, and has anti-jamming ability as well.

A new form of self-organizing fuzzy control technique is studied for missile autopilot to improve the control performance.

The technology of fuzzy control is applied to automation switching control of compensation capacitors ind distribution networks.

The important item of designing multivariable fuzzy controller is to obtain the rules of the multivariable fuzzy control.

The design thought is to control the system of color printing and making bags by cutting accurately with fuzzy control technique.

In this paper, we applied the fuzzy control technology to a ventilator pressure control and evaluated the results on experiment platform.

A fast control algorithm, based on fuzzy control, can be used to shorten the heating time of domestic gas boilers.

Methods Fuzzy control theory was applied to automatic zero setting of the PSA quantitative detection system.

the essence of variable universe fuzzy control is stated and its control performance for linear and non-linear system is deeply studied.

The chattering which exists in sliding mode control system can be reduced by leading fuzzy control into sliding model control system.

A second-fuzzy decoupling method of fuzzy control for the coupling problem of the temperature control in the rectifying tower is presented.

The fuzzy control algorithm used at large error had been explained especially and simulated with MATLAB.

The adaptive fuzzy control system can reduce the overshoot of the grinding force and its control effect is better.

Fuzzy control has the advantage of quickness, it has a strong robustness. There is no need to know the object's mathematical model.

The practice shows that the products using intellectual fuzzy control have good performance and obvious energy conservation effect.

This paper presented a remote control system of the inverted pendulum with a diagonal plank by fuzzy control.

Without CPS structure and size, the fuzzy control method can improve the performance of the control and protective switching devices.

Aim With intersection delay as fuzzy input, to put forward a new method of traffic fuzzy control system.

The results show that the optimum fuzzy control effectively overcomes the disturbance and improves the control performance.

Aim In response to the features of the control system for water level in boiler, the control system is designed by fuzzy control theory.

By simulation, the performances of the magnetorheological damper and its fuzzy control technique are studied.

It is necessary to determine the turbidity model of water in washing machine and its detecting method to realize fuzzy control.

For the control problem of temperature field on the cement rotary kiln, a simple and useful fuzzy control scheme is presented.

A fuzzy control scheme is proposed for the purpose of balance control of an inverted pendulum system.

The working performances of the MR damper, working flow-chart of fuzzy control and the advantages of intelligent control are introduced.

In this paper, fuzzy control method is applied to the position control of loop and fuzzy controller is realized by PLC.

Based on characteristic and principle of the belt conveyer, PID control and Fuzzy control are applied to the belt conveyer respectively.

Conclusion Simulation test shows that the fuzzy control system for water level in boiler has fast response speed, high precision.

The problems of variable-universe fuzzy control algorithm and its convergence are studied in this paper.

To give the coal amount cluster fusion control system as an example, we study the design of the adaptive fuzzy control system.

Secondly, the combination of sampled-data control, realization of dynamic fuzzy control of acceleration and deceleration.

A feed forward fuzzy control method is proposed to control a new type of floating raft with an adjustable damper.

The PID control signal was modulated by fuzzy control to improve the system performance.

It obtains the merits of fuzzy control and artificial immune algorithm, which have strong anti-disturbance ability and great robustness.

This course discusses the theoretical background and applications of fuzzy control, neural network control and gray theory.

Fuzzy control strategy was applied to developed a BTP control system with the prediction model.

The cube root of fuzzy number can be applied to solve the fuzzy control problem.

Auto-tracking optimum algorithm is combined with fuzzy control to achieve thermal efficiency optimizing control .

The operational principle, and the establishing method of fuzzy control regulation table and control interrogation table are described.

Simulation result shows that the application of self - adaptive fuzzy control in this system has pretty good effect.

Experiments show that fuzzy control can obtain good control result. This control method has a good applied value in high speed weaving.

The paper presents the application of the fuzzy control theory for vehicle active suspension system.

The simulation results show that the proposed adaptive fuzzy control system has good adaptability.

A novel indirect adaptive fuzzy control scheme is proposed for the concerted driving control of six-wheel lunar rover.

This paper mainly focuses on the application of fuzzy control technology in the position control system with fuzzy information.

each subsection was regulated with single fuzzy control loop so that the single loop temperature can be kept more precise.

This system improves the quality and the performance of the product in filament winding by adopting Fuzzy control.

Results The design and simulation of the fuzzy control system for water level in boiler are accomplished.

The software is programmed using C language, for getting the fuzzy control data table and realizing the realtime fuzzy control.

First, the paper presents the survey of cybernetic theory. Neural Networks and Fuzzy Control, and the status quo of Wind Turbine Generator.

Based on this, the control strategy of the combination of the fuzzy control and PID control is used to the micro tension control system.

The paper explores the application of the fuzzy control technology for the wet clutch.

A fuzzy controller for the greenhouse is designed, and the fuzzy control system of the greenhouse temperature is built up.

It is adopted some advanced technique of person_machine consultant brain control, solid contain fuzzy control and self_adaption PID control.

The results show that the fuzzy control model can effectively inhibit the occurrence of locomotive's skid.

It is shown by the results that the ride is improved evidently with the fuzzy control method introduced.

The load following of pressurized water reactor(PWR)is studied. A three-dimensional fuzzy control system of boron concentration is designed.

Recently, Neuro-fuzzy Control base on the Neural Network Theory and Fuzzy Logic System was used widely and successfully.

When the target position was nearly reached, the fuzzy control was chosen to adjust the position of phase interface.

An adjustable fuzzy controller of which the fuzzy control rule table can be obtained by numerical calculation is designed.

This paper puts forward a new program of employing fuzzy control technology and neural network theory to detect intrusion.

The character of large time delay and inertia in annealing process has been optimized by PID parameter-adaptive fuzzy control algorithm.

As for software, fuzzy control is used as the kernel arithmetic, and C language is used to compile the whole program.

The fuzzy control of alumina concentration in industrial aluminium cells is investigated.

In the end, considering that the barrel is coupling, a decoupling control and thereafter fuzzy control method are discussed.

Realization method of fuzzy control system for sintering shaft furnace temperature is introduced.

Combining fuzzy control theory and PID control, an adaptive controller to control boiler is proposed in this paper.

Combined with the study of constant force grinding, a self-study method on fuzzy control rules in grinding process is suggested.

Then fuzzy control model is selected to implement automatic regulation for controlled object.

Then uses the fuzzy control algorithm for frequency control and compares with classical PID algorithm.

Moreover it uses fuzzy control technology to realize auto control of the temperature of water supplement.

This problem can be solved on the basis of the fuzzy control theory.

Fuzzy control theories combined together with the theory of variable structure control, put forward a approach law based on fuzzy logic.

Finally, we view the key research problems and development tendencies of fuzzy control in AC motor system in future.

The finding line control and avoidances are solved using fuzzy control for an autonomous mobile robot.

In this paper, using Gauss function as membership function, fuzzy control and neural network are combined.

To perfect output performance of the fuel cell, a fuzzy control algorithm is presented.

Uses solid state relay to isolate the high and low voltage, uses frequency conversion motor to realize fuzzy control.

Based on the analysis of fuzzy control, combined with the form of PID control, the S Plane Control has been applied.

Therefore, this paper designed an intelligent drainage system of gas for local fan, combining the fuzzy control algorithm.

Clearly, in the Fuzzy PID control process, the extraction of Fuzzy control rules is the key and difficult problem.

So the incremental fuzzy control with integrator technique is designed according to the established model and control experience rule.

The paper proposes a new intelligent fuzzy control system for hydroelectric generating unit.

Finally, the numerical simulation of fuzzy control of a SDOF system isu. . .

The key to a good fuzzy control system is its fuzzy control query table.

Elaborate to the conception of collision dangerous degree, and study dangerous degree model according to the principle of fuzzy control.

The fuzzy control theory is studied and the electric boiler fuzzy controller structure is determined.

This paper focused on the modeling and network integration of fuzzy control and fault diagnosis.

But building the fuzzy rules is hard, and the ability of self-adapting and self-study are poor in the fuzzy control technology.

Finally, this paper studies the fuzzy control algorithm of the AGV control.

giving fuzzy reasoning algorithm of the controller , saving energy control system was designed based on fuzzy control.

Objective Construct fuzzy control mathematical model on infection of SIR type.

Fuzzy control on processor requirements are too high, and is also a process delayed.

Approaches of qualitative fuzzy control are given concretely.

Fuzzy control algorithm is programmed by Borland C , control of inverted pendulum hardware system is realized.

According to the theory of fuzzy control, this paper optimized the traffic control of intersection.

The adaptive algorithm can estimate unknown parameters on-line, and fuzzy control can damp the vibration caused by sliding mode control.

The implement method of variable structure fuzzy control system with PLC is introduced.

A fuzzy control system developed to regulate the system was based on hand control tactics.

The control algorithm has not only the quickness and fuzzy control system and control system of PI.

We should discuss the possibility to apply former feedback, fuzzy control, forecast control on the system.

The paper introduced fuzzy-control applied for lumber drying process.

In chapter 4, design and stability analysis methodologies of adaptive fuzzy control system are discussed.

An MCU-based fuzzy control technique for fiber drawing machines is developed.

Then discuss the application of fuzzy control means on the ASR of four wheel drive vehicle.

we adopt Fuzzy control theory for controllable pitch propeller.

The method of Single-chip fuzzy control makes the compensation to be real time and intelligent.

An electronic fuzzy control scheme for energy saving was presented.

The algorithm for combined PID and fuzzy control for combustion system of boiler was studied deeply.

In this paper, fundamental knowledge of fuzzy control theory and mathematics knowledge related are discussed at large in the first part.

The present system employs the fuzzy control method instead of the traditional PID control.

The paper proposes a design of water supply system using Fuzzy control and synchronous switch.

Automatic generation of fuzzy rules is a key technique in fuzzy control.

This article is based on fuzzy control theory and design of fuzzy controller, and PID control and fuzzy control, for DC double loop system.

PLC fuzzy controller completes the fuzziness of input signal and consulting based on fuzzy control rule by consulting table.

Part ofthe DSP control software and hardware development, adaptive fuzzy control strategy to realize the real-time MR damper adjustment.

An autonomous navigation system based on self-adapted fuzzy control for agricultural tractor was proposed.

ZHU Jing. Fuzzy control principle and apply[M]. Beijing: Mechanical Industry Press, 2001.

A self-organized fuzzy control system described in this peper is satisfied for these requirements.

A rule-based hammerer model was proposed on the basis of fuzzy control theory.

This paper presents a method of keeping press of mixing gas pressure constant with the use of fuzzy control.

Structure of fuzzy controller, fuzzy control table, and the hardware and software design are mainly introduced.

Commonly rooted in the knowledge of experts and skilled operators, the fuzzy control rules are greatly subjective and undeterministic.

The study for simulation proves that fuzzy control has more distinct advantage, better control capacity and robustness than PID does.

This paper introduces an example of PLC in fuzzy control Temperature control of steel plate anneal furnace.

Based on the analyses, the paper introduces the PID control and fuzzy control to the hardware controller.

According to the immune principle and the fuzzy control rules, a fuzzy immune PID control method is designed.

Secondly, a fuzzy control scheme based on genetic algorithm is proposed for the crane system.

The method is also successful. In addition, cascade fuzzy control method and shunt-wound fuzzy method are designed in the paper.

the fuzzy control table is given on the basis of fuzzy controller.

This paper deals with the design of fuzzy control systems by using the approach of sliding mode control.

According to the problem of O2 concentration control in incubation control system , an intelligence control way-fuzzy control is utilized.

Decoupling rule is given to amend the output of fuzzy control.

A new control system based on fuzzy control technology for sawdust collecting device was designed.

and analyzed the development prospect for fuzzy control on drilling measuring and controlling.

Comparing the second strategy, the first one can gain more profit, but have difficulty in practices because of the fuzzy control variables.

Thus we designed an adaptive fuzzy Active Disturbance Rejection Controller (ADRC) based on fuzzy control principle.

Program frame of fuzzy control rule and some application program are given .

A novel hybrid control strategy based on fuzzy control and repetitive control is proposed.

A fuzzy control system of plasma energy transfer is designed to make the plasma torch work best.

Using the computer to realize fuzzy control, it is convenient for people to adopt the natural language to exert one "s influence on plant. "

According to the Peltier effect and contraposing the characteristic of TEC, the method of fuzzy control is presented.

In order to examine the effectiveness of DNA genetic algorithm, it is applied into the optimal design of TS fuzzy control system.

This paper studies the intelligent engine control based on fuzzy control.

Fuzzy control method is a good selection because it is not depend on exact model of controlled object.

Under this situation, people are increasingly paying attention to fuzzy control.

In order to solve imprecision problem of model, an approach of fuzzy control to suppress vibration of vehicle is proposed.

The basic principle and control structure of seam tracking system based on fuzzy control with leading sensor was stated.

Through the analysis of all kinds of control methods, the paper used fuzzy control method to design the controller.

This paper introduces the temperature control system of one industrial rotary kiln where fuzzy control method is used.

This paper proposes a direct torque control system of permanent magnet synchronous motor (PMSM) based on fuzzy control.

It is difficult to analyze the stability of fuzzy control systems. This is because these systems are essentially nonlinear.

the real time control model in the construction stage is put forward based on the fuzzy control theory.

Nowadays, fuzzy control is mostly driven by instructions based on PC or singlechip.

So we can use the Fuzzy control technique to solve the problems, which are in the EGCS, every well.

At the same time, it is pointed that AI technique, expert system and fuzzy control etc are the development aspec. . .

When we apply fuzzy control to a unknown process, we can't find good control rule because of we don't know it's characteristics.

In this thesis, a hydraulic cylinder position control system , which was based on the high-speed on-off valve by use of fuzzy control.

Fuzzy control, one intelligent control algorithm, can not only use specialist knowledge, but also learn new knowledge from data.

The simulation results show that the ABS with fuzzy control is robust, has good control effectiveness and easy to implement;

The fuzzy control theory was introduced in order to study the controlling problem of the double inverted pendulum.

A Study of Dynamic Decoupling Fuzzy Control Systems by Means of Generalized Inverse Matrix

Adaptive Fuzzy Control for Vibration Suppression of a Flexible Structure and its Experimental Study

Focusing variable structure fuzzy control and its application to steam temperature control of a boiler

Distributed fuzzy control under hybrid traffic flow of a traffic intersection

Study of A Fuzzy Control and Simulation System for Multiphase Single Intersection

Study of Two-Stage Fuzzy Control Algorithms about Adjacent Traffic Intersections

Study of Fuzzy Control with Parameters Changed and Simulation for a Turret Control System

The fuzzy control method of a sort of network queue problem

Membership Functions in the Fuzzy Control System and Its Influence on the System Performance

Design of the Fuzzy Control System over the Body Vibration of I. C. Engine

The Fuzzy Control Method Used in Household Appliances and Its Technologic Application

Dynamic performance simulation of a power-shift steering transmission using fuzzy control strategy

Design of a multivariable fuzzy control system and its simulation research

Neighborhood Clustering Adaptive Fuzzy Control and Its Application in the Electric Heat Furnace with Multiple Temperature Zones

Study of reshaping symmetry degree of output waveform of AC - AC transducer and realized by fuzzy control method

Research on the Fuzzy Control Technique and its Simulation Realization In Communication Countermeasures

Design of Inverter Speed Adjusting by Means of Communication on the Base of Fuzzy Control Arithmetic

Synthetical modeling and fuzzy control simulation of a manipulator-hydraulic drive system

A Study of the Rule -adjustable Adaptive Fuzzy Control System for Ultra -precision CNC Machine

The Application and Study of Fuzzy Control in Hybrid-excitation Synchronous Generation System

The Simulation Study of a SAM Based Fuzzy Control Algorithm

Application research of the fuzzy control technology in the variable-frequency speed-governing constant-pressure water supply system

Monolithic integrated circuit in electric refrigerator intelligence fuzzy control application,

Design of Fuzzy Control System Used for Pulp Washing Process

Using BP Neural Network to Determine the Membership Function of the Input of Fuzzy Control System

The Influence of the Common Operators to the System's Output in the Fuzzy Control Algorithms

The Application of Fuzzy Control Method in Measuring and Controlling for the Test Parameters of the Electrical Apparatus

Simulation Study of Lubricating Oil Temperature Fuzzy Control System for Turbine

Multi-strategy based fuzzy control algorithm and its optimization for isolated intersection

Revised Fuzzy Control Algorithm Used in Computational Fluid Dynamic Simulation

Marshalling yards; Speed control for space adjustment; Defined speed for exiting; Fuzzy control; neural network; Intelligent control;

Application of Fuzzy Control to Braking of a New Vehicle with Electronic Control and Hydrostatic Drive

Research of the Adaptive Analytic Fuzzy Control Algorithm Applied to Automatic Drive

An Equivalent Transformation Based Method to Optimize T-S-K Fuzzy Control Systems and Its Functions in Controller Design

Application of a Novel Fuzzy Control Algorithm in Water Temperature Control System

Fuzzy control techniques applicable to a frequency conversion elevator system

Hierarchical Fuzzy Control for Urban Traffic Trunk Roads and Its Neural Network Implementation

Cascade Fuzzy Control of the Great Time-delay Systems in Petrochemistry Industry

Study of Low Speed Performance of Asynchronous Motor Direct Torque Fuzzy Control System

Design of a new pneumatic position servo system and research on its fuzzy control

Applications of Self-Adjustment Fuzzy Control on Alcohol- Recovery Procedure of Chinese Traditional Medicine Production

Study of Intelligent Strategy in the Pre-baked Aluminium Electrolytic Pot Fuzzy Control

Study on the Fuzzy Control Strategy of Continuously Variable Transmission for an Automobile

Research on Fuzzy Control Technology Applied to Magnetic Powder Clutch during Vehicle Starting

Study of the fuzzy control system for burning through point of sintering

Experimental Study on Fuzzy Control of Transient Aerodynamic Heat Flow of Missile

Study of Urban Intersection Transit Priority and Fuzzy Control Strategy

programmable controllers - fuzzy control programming

Investigation and Actualization of a New Multi-Variable Fuzzy Control Method

Application of Fuzzy Control Theory and Acoustic Charts Analysis Technology to Detachment Identification of Rigid Pavement

Swing-Free Transporting of Two-Dimensional Overhead Crane Using Sliding Mode Fuzzy Control

Fuzzy Control Systems with Feed-forward Compensation and Its Applications to Boil Level Control

Design and Implementation of Expert Fuzzy Control System for an Environmental Chamber

Adapting Fuzzy Control for Anti-lock Braking System and its Experiment of Rapid Control Prototyping

Study of attitude fuzzy control for air spring vibration isolation platform

Application on fuzzy control algorithm in an opto-electronic tracking servo system

Adaptive Fuzzy Control for a Class of Nonlinear Systems with Input Dead-zone Nonlinearity

Study of the Test and Control System of Engine Test Bed with Multiply Neural-Fuzzy Control Method

Fuzzy - control Genetic Algorithm Applied in Optimal Power Flow of Power System

Realize on self-optimization of the boiler's combustion process by a three-layered fuzzy control ring

Fuzzy control of light military vehicle hydrostatic transmission

Doubly-fed wind generator; Variable pitch control; Maximum power point tracking; Adaptive fuzzy control; Vector control;

Parameter-self-adjusted fuzzy control method applied to semi-active air spring suspension of vehicle

Study on the Emulation of the Self-regulating Fuzzy Control for the Ac-Ac Transducer Two-loop NN Speed Control System

intelligent fuzzy control; discontinuous control; water turbine governor;

Fuzzy Control Strategy of Hydro-mechanical Transmission of a Vehicle

Application of fuzzy control technique to the control of the main pumps in Ku-Shan crude oil pipeline

Human-imitation intelligent fuzzy control applied to cone crusher during crushing

Research on the Fuzzy Control Strategy of Permanent Magnet Linear Synchronous Motor Vertical Transportation System