单词 | finite element model |
释义 | 例句释义: 有限元模型,有限元素模型,有限要素模型,有限元模式,有限单元体模式,有限元素法 1. A finite element model was used to optimize the parameters for a surface-stress sensitive piezoresistive microcantilever sensor. 为获得用于表面应力测量的压阻悬臂梁传感器的参数的优化方法,建立了有限元分析模型。 www.71155.com 2. A finite element model for progressive deformable barrier (PDB) used for frontal offset impact test is built. 建立了渐变强度可变形壁障(PDB)的有限元模型。 www.ceps.com.tw 3. The finite element model could be developed to predict the propagation life of PM turbine disk containing defects with different sizes. 将该方法加以拓展,建立了含有不同尺寸缺陷的粉末盘断裂力学有限元模型,并对其裂纹扩展寿命进行了评估。 epub.cnki.net 4. A finite element model of the patients' trunk including gravitational forces and a parametric brace model were created. 建立患者躯干的有限元模型包括重力和参数支具模型。 www.oaopdoc.com 5. At last, it set up the finite element model of the pump tower and carried through the strength finite element analysis. 最后建立泵塔的结构有限元模型,进行结构强度有限元分析。 paper.pet2008.cn 6. Through the finite element model and using formulas given in this paper the changes of hydraulic conductivity in a mining face are examined. 利用此关系式及有限元方法计算,得出了裂隙岩体渗透系数随应力的变化值。 www.cgejournal.com 7. A finite element model used to simulate the deformation process of safety cover for grinder with broken grinding wheel is presented. 建立了一种用于磨床砂轮破裂后防护罩变形过程分析的有限元模型。 www.chemyq.com 8. The principles to construct finite element model for modal analysis of the cylinder block have been obtained. 通过研究,得出了建立内燃机机体的有限元模型的一些原则。 www.ceps.com.tw 9. The finite element model of the air core coil is established and the influential factors of conductor size is analyzed. 建立空心线圈的有限元模型,对线圈尺寸影响因素进行了分析。 www.chinatransducers.com 10. The musculoskeletal system is also a finite element model, and FE analysis can be performed for global or local skeletal components. 它同时是人体全身骨肌系统的有限元模型,可以做全身骨骼或局部骨骼的有限元分析。 www.ceps.com.tw 1. The error between the finite element model and the reality model brings on the error between the results obtained by theory and test. 结构有限元模型与真实模型存在工程允许的误差导致理论与试验结果存在一定的误差。 hkxb.buaa.edu.cn 2. Objective: To construct a three dimensional finite element model for edentulous maxilla restored with dental implant and attachment. 目的:建立上颌无牙颌种植体义齿与附着体联合修复的三维有限元模型,为其生物力学分析提供数学模型基础。 www.dictall.com 3. It shows that the established finite element model can reasonably analyze the bearing of steel-encased concrete composite beam. 结论建立的有限元模型能合理分析外包刚组合梁的受力特性。 www.ceps.com.tw 4. By setting up finite element model, the load stress and the warping stress of the two materials pavement are calculated and compared. 建立有限元模型,计算配置两种材料道面的荷载应力与翘曲应力并进行比较。 www.dictall.com 5. Study Design. Multiple brace designs were simulated using a finite element model and their biomechanical effect was evaluated. 研究设计:应用有限元模型模拟多种支具设计,分析其生物力学效应。 www.oaopdoc.com 6. In this paper are the subject of subway seats, based on aluminum seats of geometric model, simplified seat structure finite element model. 本文分析的主体是地铁铝合金双人座椅,通过对双人座椅的几何模型进行简化,得到了座椅结构的有限元模型。 zhidao.baidu.com 7. It was found that an elastic modulus of 50 MPa gave good correlation between the finite element model and the experimental systems. 有人发现,有一个弹性模量50兆帕了良好的相关性有限元模型和实验系统。 www.syyxw.com 8. The finite element model of this kind of wheel is established according to the bending fatigue experimental data of automobile wheel. 根据汽车车轮弯曲疲劳实验数据建立该种车轮的有限元模型。 oldweb.cqvip.com 9. Results A three-dimensional finite element model of palatal implant anchorage is successfully constructed, meeting t. . . 结果建立了符合生物力学研究需要的腭部种植支抗的三维有限元模型。 www.chemyq.com 10. The present finite element model is shown to be reasonable in predicting the ossicular mechanics of human ear. 研究结果表明本文建立的人耳三维有限元模型对研究听骨链声学力学特性是有效的。 dictsearch.appspot.com 1. Then, a finite element model was accordingly developed to simulate ultrasound waves generated by a pulsed laser in the skin. 然后,根据有限元数值分析方法的特点,建立脉冲激光激发皮肤产生超声波的有限元模型; www.eope.net 2. another is finite element model, this kind of model's advantages are lower costs, easier changes, but it will bring modeling error. 另一类则是有限元模型,此类模型优点在于成本较低,修改方便,但它会带来建模误差。 www.fabiao.net 3. According to structural feature of the roller and its axle in rotary kiln, a finite element model of roller-to-axle contact was developed. 根据托轮及托轮轴的结构特点,建立了托轮、托轮轴的接触有限元模型。 www.ceps.com.tw 4. It proves that the finite element model is correct and the calculation results are reliable to compare with the experiment results. 通过与试验结果对比,验证了有限元模型的正确性和计算结果的可靠性。 www.ceps.com.tw 5. Simplified two-dimension finite element model was established for the hollow rubber seal of hood-type annealing furnace. 建立了罩式退火炉空心橡胶密封圈的二维简化有限元模型; www.chemyq.com 6. as the target of study, this paper established a finite element model to carrying out impact dynamics simulation. 以某型弹射座椅为研究对象,建立有限元模型进行座椅结构的冲击动力学仿真。 dict.kekenet.com 7. Methods. A poroelastic, three-dimensional finite element model of a C5-C6 segment with a normal (grade I) disc was used after validation. 方法:一个C5-C6节段包含正常椎间盘(I级)的多孔弹性、三维有限元模型经过验证后用于本研究。 www.oaopdoc.com 8. The fourth topic is: matrix presentation linear least square errors method inverse heat transfer finite element model for upsetting. 第四个主题:锻粗加工逆解热传导系数之热传有限元素分析模式。 140.118.33.11:8080 9. After analysing each unit and the whole area, a 3-D finite element model and a corresponding c language program were constructed. 通过对各单元的分析和整个求解区域的综合,建立了三维的有限元数学模型,根据此模型编写了相应的C语言程序。 www.chemyq.com 10. The solid finite element model of the knuckle has been built using a second order solid tetrahedron element. 这一坚固的转向节模型是由坚固的二级四面体单体元素做成的。 zhidao.baidu.com 1. Finite element model of fault block's azimuth response has contingency with measured response, which supports this hypothesis. 有限元断层地块模型应变方位响应与台站实测方位响应的一致,支持了这一观点。 www.ceps.com.tw 2. The large deformation formulae of filament wound case (FWC) are derived, and the finite element model of the FWC is established. 推导和建立了纤维缠绕壳体大变形有限元公式和有限元模型。 www.dictall.com 3. Experiment results show that using this new algorithm for tetrahedron , finite element model can provide well visual result. 实验表明,研究的新算法用于四面体单元的有限元模型,具有良好的切割处理效果。 dictsearch.appspot.com 4. The results from test and calculation are in good agreement each other, which indicate that the finite element model established is correct. 将计算结果与试验结果相比较,验证了有限元模的正确性。 www.lw23.com 5. The simplified analytical model and finite element model were built and the factors influencing the performance were analyzed. 建立了传动机构的简化力学模型和有限元模型,并对机构性能的影响因素进行了分析。 www.ceps.com.tw 6. The finite element model of complex gearbox housing, with some lubricant in it, is built. The fluid-structure coupling theory is employed. 运用流固耦合有限元理论,建立了具有一定高度油液的某型车辆复杂变速箱箱体的有限元模型。 www.ceps.com.tw 7. Objective To redevelop the finite element model libraries and to analyse the stress distribution of telescopic crown dentures. 目的二次开发有限元模型库,尝试该建模方法对套筒冠义齿进行力学分析的可行性。 xuebao.shsmu.edu.cn 8. To describe the solidification in caster mold, a twodimensional fully thermomechanical coupled finite element model was established. 针对钢在板坯连铸结晶器内的凝固过程,建立二维完全热力耦合有限元分析模型。 www.chinamet.cn 9. Based on the heat transfer, the two-dimensional transient finite element model of machining temperature is set up. 以传热学为基础,建立切削温度二维瞬态有限元模型。 www.chemyq.com 10. The finite element model of the track is established in ANSYS. It includes the rail, the pad, the sleeper, and the ballast. 在ANSYS中建立了轨道有限元模型,整个轨道的结构包括钢轨、扣件、轨枕、道碴。 www.boshuo.net 1. The finite element model for press joining mould and sheets is built up on the platform of finite element analysis software ANSYS. 以有限元分析软件ANSYS为平台,对金属板件压铆过程中的应力场和应变场进行计算。 www.ceps.com.tw 2. Objective To establish the three-dimensional finite element model libraries for mandibular bilateral distal-extension prosthesis. 目的建立下颌双侧末端游离缺失修复方案的有限元模型库。 xuebao.shsmu.edu.cn 3. A coupled magnetic-circuit-fluid-thermal finite element model is proposed for thermal analysis of dry-type air-core reactor. 建立了空心电抗器磁场-电路-流场-温度场的耦合计算模型。 www.dictall.com 4. Then, a finite element model of the cabinet was established for calculating modal analysis. 然后建立了箱体的有限元模型,对其进行了计算模态分析。 www.chemyq.com 5. Secondly, with the Mohr-Coulomb criteria, a finite element model of plane strain is established using ADINA. 为便于对比,利用ADINA有限元分析软件,基于Mohr-Coulomb准则,建立了平面应变有限元模型。 www.13191.com 6. A 3D finite element model has been developed to analyze the stress distribution between a lower residual limb and its prosthetic socket. 通过建立三维有限元模型来分析大腿假肢接受腔与残肢之间的载荷传递。 www.chemyq.com 7. Firstly, the geometry model of the cab is established with Catia, then the finite element model of the cab is simulated by Hypermesh. 首先,通过Catia建立了驾驶室三维几何模型,再利用有限元前处理软件Hypermesh建立了驾驶室有限元模型。 www.13191.com 8. Contact finite element model at different position is generated and profile modification is operated in meshing process using the software. 应用该软件可以生成啮合过程中不同位置轮齿接触有限元模型,同时可以对模型进行齿廓修形操作。 www.lw23.com 9. A finite element model of swaying tree was established to explore the kinetic mechanism of swaying tree in wind field. 为了探索树木在风场中摇曳的运动机理,建立了风中摇曳树木的有限元模型。 www.ceps.com.tw 10. A finite element model of plane steel frame under localized fire is presented in this paper, and the model is verified by test results. 本文建立了局部火灾下平面钢框架耐火性能分析的有限元模型,模型得到了实验结果的验证; lib.cqvip.com 1. A three-dimensional finite element model of casing-cement sheath-formation was established. 建立了套管、水泥环和地层的三维有限元模型。 www.ceps.com.tw 2. Finite element model is set up of supporting load distribution of large rotary kiln by lateral layers and longitudinal sections. 采取横分层、纵分段的方法,建立了回转窑支承载荷分配的有限元模型。 www.chemyq.com 3. Results A 3D finite element model of fixed denture including alveolar bone, abutment, pericementum and denture were established. 结果建立了包含牙槽骨、基牙、牙周膜、固定义齿的三维有限元模型。 www.mechanobiology.cn 4. Constructing a finite element model of osteonecrosis of the femoral head. 建立股骨头坏死有限元模型的方法。 word.hcbus.com 5. fixed-mold-plate are complex. These make its finite element model establishment difficult. 橡胶注压成型机锁模板结构及其约束的复杂性造成有限元建模的困难。 www.showxiu.com 6. A finite element model of large combined tubular reactor with complicate structure and loads was built up. 对结构和受载都非常复杂的某大型组合管式反应塔建立了有限元模型。 www.dictall.com 7. This paper puts forward a reasonable method of establishing the finite element model for sandwich panel with ribs. 提出了一种新的合理的加强筋夹芯复合板有限元模型建模方法; www.ceps.com.tw 8. Finite element model mesh use the high-precision rectangular unit which aspect ratio close to 1. 有限元模型采用单元边长比接近于1的高精度四边形单元划分网格。 www.fabiao.net 9. The finite element model of a coach framework is built. Its simulation analysis is made by LS-DYNA following ECE R66 regulation. 建立客车骨架的有限元模型,依照ECER66法规,使用LS-DYNA软件对其进行侧翻仿真分析。 lib.cqvip.com 10. In this paper, a finite element model of a frame, which used a new connect analog mode, was established based on ANSYS. 运用有限元分析的方法,采用合理的模型简化方法及一种新型的连接模拟方式,对某型车车架建立了基于ANSYS的有限元模型。 www.ceps.com.tw 1. the finite-element model of force analysis of the flexible shaft is established. 建立了挠性轴受力分析的有限元模型。 www.juyy.net 2. Secondly, on the basis of original experimental data, the paper develops a finite element model. 其次,本论文针对车辙试验,在原有试验数据的基础上建立有限元分析模型。 www.fabiao.net 3. According to the principle of the finite element method, simplified finite element model is created in ANSYS by using output loads of ADAMS. 根据ADAMS输出的载荷谱,利用有限元原理,在ANSYS中建立了适当简化后的关重件的有限元模型。 paper.pet2008.cn 4. A two-dimensional axisymmetric finite element model of sampling tube and sediments is built. 建立了取样管与沉积物接触的二维轴对称有限元模型。 www.marinejournal.cn 5. To analyze the stresses in slab track structures on soil subgrades, a finite element model was derived. 为分析土路基上板式轨道结构的受力,建立了有限元分析模型,从应力极值的角度研究了底座尺寸效应。 www.dictall.com 6. A framework of inertial measurement unit is designed and the B-spline wavelet finite element model of IMU is worked out. 给出了一种惯性测量单元(IMU)系统结构,建立了整个模型B样条小波有限元模型; www.ceps.com.tw 7. The finite element model was established of an automobile body at first, and the computational modal analysis was conducted. 首先建立了汽车车身结构的有限元模型,并进行了有限元计算模态分析; www.ceps.com.tw 8. According to the actual condition, a 2D finite element model had been built for the car door hinge and reinforced plate. 针对轿车车门凸焊后会产生焊接变形的具体情况,建立了一个铰链和加强板的二维有限元凸焊模型。 dictsearch.appspot.com 9. Primary study on the construction of the finite element model of tooth and post-core. 牙齿与桩核三维有限元建模的初步探讨。 www.ilib.cn 10. A finite element model of plain strain sand-wall roadbed is established, in which the effect of back beams and tide is considered. 基于海滩区淤泥路基中反压护道和潮汐的作用,建立了平面应变砂墙路基有限元计算模型。 www.ceps.com.tw 1. A finite element model of intelligent beam has been formulated to derive the differential equation and the energy equation. 同时,根据有限元理论,推导了智能梁离散系统的动态微分方程及能量方程。 dictsearch.appspot.com 2. Establish the finite element model of acidification testing string. 酸化测试管柱有限元力学模型的建立; lib.swpu.edu.cn 3. Therefore, the engineer should spend a lot of time on setting up finite element model and revise models in CAE project of analysis. 因此,工程师往往在CAE分析工程中要花费大量的时间来建立有限元模型和修改模型。 www.magsci.org 4. Vibratory pile driver and extractor and soil are researched. When both are simplified, the finite element model is set up. 以振动沉拔桩机和土为研究对象,对二者进行适当简化后,建立其有限元模型。 www.ceps.com.tw 5. This paper studied two-dimension model of rotor and cylinder and builded the finite element model. 本文对汽轮机转子和汽缸的二维模型的进行分析,建立有限元模型; www.fabiao.net 6. A finite element model for rubber matrix composite structures is developed in this paper. 建立了一个橡胶复合材料结构有限元分析模型。 www.chemyq.com 7. OBJECTIVE: To construct a three-dimensional finite element model of osteonecrosis of the femoral head based on CT images. 目的:借助股骨头坏死患者的CT扫描图片建立更加逼真的股骨头坏死有限元模型。 www.bing.com 8. And then, the finite element model is verified by comparing with experiment results. 并与实桥的实验数据做了对比,验证了所建模型的准确性。 www.fabiao.net 9. Study Design. Determination of damage to a lumbar disc caused by lifting using a poroelastic finite element model study. 研究规划:使用多孔有限元模型研究确定手举活动对腰椎间盘的伤害。 web.degree-distance.net 10. A finite element model for single-walled carbon nanotubes(SWCNT) is introduced. 实验提出了一种针对单壁碳纳米管的原子尺度有限元模型。 www.chemyq.com 1. and the three dimensional finite element model is established, tool wear at different cutting parameters is predicted and analyzed. 并且建立了三维有限元切削模型,对刀具的磨损情况进行了预测和分析。 paper.pet2008.cn 2. Then two principal improving aspects of building finite element model and the foreground of the research are discussed. 最后提出有限元建模的两个主要改进方面及其研究趋势。 d.wanfangdata.com.cn 3. The value of each gap in finite element model was discussed according to the manufacture process. 从制造工艺的角度对有限元模型间隙的取值进行讨论。 www.fabiao.net 4. A damage assessment method for solder joints based on time stress monitoring and three-dimensional finite element model is introduced. 从时间应力导致焊点故障的机理入手,以焊点的三维有限元模型为基础,对焊点实时损伤的评估方法进行研究。 epub.cnki.net 5. An finite element model is established by ANSYS, the deformation of optical mirrors caused by temperature field is analyzed. 用ANSYS建立有限元模型,分析由温度场引起的光学镜面形变。 www.opticsjournal.net 6. By connecting the finite element model of Mashuihe-Bridge, it developed the modal frequency and vibration mode. 结合马水河特大桥建立其完整的空间有限元模型,给出了模态频率和振型; www.fabiao.net 7. Finally, the finite element model is verified based on the construction of measurement method of the grip rigidity. 最后在建立径向夹持刚度测量方法的基础上,对有限元分析结果进行验证。 www.ceps.com.tw 8. On the basis of parameters obtained from full-scale experiment, a 3D finite element model of new disk-type scaffold is set up. 基于足尺试验得到的模型参数,建立新型插盘式脚手架的三维有限元模型。 www.dictall.com 9. A corresponding finite element model is established according to the sensors theory, and the modal equation is derived. 根据传感器的工作原理,建立了相应的有限元模型,推导了传感器工作的模态方程; zdcs.nuaa.edu.cn 10. Then this essay builds the finite element model with the ICEM software. 然后利用ICEM软件建立有限元模型。 www.fabiao.net 1. A plastic finite element model was established on the drawing process of copper tubes. 建立了铜管流动芯头拉拔过程的弹塑性有限元模型。 lib.cqvip.com 2. Based on the experimental modal analysis, compare the modal parameters to verify the validity of finite element model. 在试验模态分析基础上,对比分析模态参数,验证有限元模型的有效性。 www.fabiao.net 3. This paper discusses a finite element model updating method based on sequence quadratic programming (SQP). 提出了一种利用通用有限元程序和数学软件进行有限元模型修正的方法。 www.ceps.com.tw 4. A linear 3D-beam finite element model based on Finite Filament Model was developed and its stiffness matrix was derived. 建立了“有限纤维”空间线性梁单元模型并推导出了其刚度矩阵; www.ceps.com.tw 5. The finite element model of Edong Yangtze River Bridge is set up according to the real construction stages of it. 依据鄂东长江大桥实际的施工过程,建立了鄂东长江大桥的有限元分析模型。 paper.pet2008.cn 6. Objective: To explore an easier and more precise method for reconstruction of 3D finite element model of dentulous mandible. 目的:寻求一种更为快捷、精确的全牙列下颌骨三维有限元模型建立方法。 word.hcbus.com 7. This paper describes the development of a finite element model of a guardrail post mounted in soil. 描述了安装在地基里的护栏立柱实用的有限元模型。 www.ceps.com.tw 8. The paper uses ANSYS to establish a finite element model of bearing-spindle system and do the modal analysis. 对主轴及轴承组件进行有限元建模并对其进行了模态分析; www.fabiao.net 9. The 3-D finite element model is built for the modal analysis of board-level package. 建立了板级封装的三维有限元模型并进行模态分析。 www.fabiao.net 10. Methods. A 3-dimensional, nonlinear finite element model of a lumbar spinal segment L4-L5 was used. 方法:我们使用了一个关于L4-L5腰椎的3维非线性有限元素法的模型。 www.med66.com 1. MARC senior nonlinear finite element software, will import 3-D modeling, built finite element model, the use of MSC. MARC高级非线性有限元软件,将三维建模导入,建成有限元模型,利用MSC。 zhidao.baidu.com 2. This thesis has given us closed type cold ring rolling of taper ring which is based on the theory of ring rolling and finite element model. 本文基于环件轧制理论和有限元理论,建立了圆锥套圈闭式冷辗扩的有限元分析模型。 www.juhe8.com 3. Based on progressive failure analysis a 3D finite element model with a hole is built. 基于渐进失效分析方法,建立了带孔的三维有限元模型。 www.dictall.com 4. According to the solder quantity and the weight of mount die, the finite element model of planar weld beads was set up. 根据焊料用量和装配模的重力,确定了平封焊缝有限元模型。 www.ceps.com.tw 5. Based on the above discussion, a spatial finite element model is established with the program soft ware SAP2000. 在此基础上,采用SAP2000建立单层厂房空间有限元模型。 www.fabiao.net 6. On the elastic stability theory, four kinds of failure modes are described by the finite element model. 在弹性稳定理论的设计内容及重点中对四种破坏形态利用有限元模型进行描述。 www.fabiao.net 7. In order to solve these problems, a new type of finite element model called equivalent truss model is proposed. 为了解决此类问题,国内提出了一种新的有限元模型一等效桁架模型。 www.fabiao.net 8. So, the quasi-3D finite element model is very useful for determining the future risk region of strong earthquakes. 因此,强震活动有限元模型的建立对判定未来强震危险区有一定作用。 www.ceps.com.tw 9. The finite element model is verified according to some relative requirements. 并按照相关的规定的要求各有限元模型进行了验证。 www.fabiao.net 10. The results indicate that two kinds of finite element model fitting is good. 结果表明:两种有限元模型分析结果拟合较好。 lib.cqvip.com 1. A 3D finite element model including 41 large structures and 5 faults based on the real geometry is established. 按照结构面的真实产状和面积,建立了包含41条长大结构面和5条断层的三维有限元模型。 202.127.156.16 2. Establishment of three-dimensional finite element model of a molar with its periodontium by means of CAE software 模型转化法建立磨牙及其牙周组织的三维有限元模型 service.ilib.cn 3. Study of finite element model of soil-shield tunnel taking account of segment joints of lining 考虑衬砌接头的土—盾构隧道有限元模型初探 ilib.cn 4. Treatment of the Boundary Condition Constraints of the Body Finite Element Model of Automotive with Air Suspensions 空气弹簧悬架汽车车体有限元边界条件的约束处理 www.ilib.cn 5. Establishment of three-dimensional finite element model of thoracolumbar vertebral compression fracture and its significance 胸腰段椎体压缩性骨折三维有限元模型的建立及其意义 www.ilib.cn 6. Establishment of finite element model of lumbar motion segment implanted with artificial lumbar intervertebral disc and its stress analysis 建立人工腰椎间盘植入腰椎运动节段有限元模型及其应力分析 www.ilib.cn 7. Development and validation of a nonlinear finite element model of the upper cervical spine 上颈椎三维非线性有限元模型的建立及其有效性验证 scholar.ilib.cn 8. Construction of a three-dimensional finite element model for the PFM bridge of the mandible tooth 下颌前牙金属烤瓷桥三维有限元模型的建立 www.ilib.com.cn 9. Establishment of a three-dimensional finite element model of mandible with dental implants for immediate loading 下颌牙种植体即刻加载三维有限元模型的建立 www.ilib.cn 10. A finite element model of sound propagation in flow duct with its application to linear optimization 一种可用于声衬优化设计的管道声传播有限元模型 www.ilib.cn 1. Significance of three-dimensional finite element model of distal end of femur reflecting its real geometrical structure 股骨下端三维有限元模型反应其真实几何结构的意义 www.ilib.cn 2. Mixed Interface stress Element-Finite Element Model with Its Application 有限元-界面元混合模型及其应用 www.ilib.cn 3. Development and Validation of a Head-Neck Finite Element Model for the Study of Neck Dynamic Responses in Car Impacts 研究汽车碰撞中头颈部动态响应的有限元模型的建立和验证 www.ilib.cn 4. Establishment of finite element model of lumbar motion segments and its biomechanical significance 腰椎运动节段新型有限元模型建立及其生物力学意义 www.ilib.cn 5. Symmetrical Finite Element Model for Structure-Acoustic Coupling Analysis of a Cavity 腔体声振耦合的对称化有限元模型及其特性研究 168.160.184.78 6. The establishment of the finite element model considers the actual load. Aluminum alloy material property is defined with actual test data; 有限元模型的建立考虑了轮毂和轮胎在冲击过程中实际受力的情况; www.boshuo.net 7. Establishment of Three-dimensional Finite Element Model for Maxillary Posterior-tooth Area, Maxillary Sinus, Zygoma and Zygomatic Implant 上颌后牙区、上颌窦、颧骨及颧骨种植体的三维有限元模型建立 service.ilib.cn 8. Development of a three dimensional finite element model of lumbar motion segment with artificial disc replacement 人工椎间盘置换腰椎节段有限元模型的建立 service.ilib.cn 9. Establishment of three-dimensional finite element model of mandibular dentition and mandible with incorporated appliances 含矫治器的下牙列及下颌骨三维有限元模型的建立 service.ilib.cn 10. A three-dimensional finite element model of the craniofacial complex of maxillary distraction osteogenesis 上颌骨复合体牵张成骨三维有限元模型的实验观察 www.zglckf.com 1. The creation of a three-dimensional finite element model of palatal implant anchorage 腭部种植支抗三维有限元模型的建立 www.ilib.cn 2. Discussion the Method about Constructing Finite Element Model of Extending the Canine Mandible Body Defect by Osteogenesis Distraction 牵张成骨延长犬下颌骨体缺损的有限元建模方法探讨 www.ilib.cn 3. Establishment of three-dimensional finite element model for mandibular distraction osteogenesis 下颌骨牵张成骨三维有限元模型的建立 www.ilib.cn 4. Biomechanical significance in the attribute selection of three-dimensional finite element model material of pelvis and acetabulum 骨盆及髋臼三维有限元模型材料属性设定及其生物力学意义 www.zglckf.com 5. Selection of three-dimensional finite element model unit of pelvis and acetabulum and biomechanics significance of construction 骨盆及髋臼三维有限元模型单元选择及构建生物力学意义 www.ilib.cn 6. A new reinforcement membrane embedded finite element model and its automatic mesh generation 一种新的钢筋薄膜组合单元及其网格自动生成 www.ilib.cn 7. Establishment of three-dimensional finite element model of maxillary complete denture with different shapes of palatal vault 不同腭穹隆形态上颌全口义齿三维有限元模型的建立 www.ilib.cn 8. Establishment of a three-dimensional finite element model of acetabulum by using DICOM data 基于DICOM数据快速构建髋臼三维有限元模型 www.ilib.cn 9. A reconstruction of three-dimension finite element model with images of degenerative lumbar spondylolisthesis 退变性腰椎滑脱三维有限元模型的建立 www.zglckf.com 10. Setup of finite element model of maxillary premolar with different designed MOD cavities and primary analysis of stress distribution 不同洞型嵌体有限元模型的建立及应力分布初步探讨 www.ilib.cn 1. Establishment of the three-dimensional finite element model of the first permanent mandibular molar and its stress analysis 下颌第一恒磨牙三维有限元模型的建立及应力分析 www.ilib.cn 2. Establishment of Three-dimensional Finite Element Model of Edentulous Mandible Containing Implant 含种植体无牙下颌骨三维有限元模型的建立 www.ilib.cn 3. Updating Finite Element Model of Cabin with Floating Raft through Sensitivity Analysis of FRF Correlation Coefficient 基于频响函数相关系数灵敏度的浮筏舱段有限元模型修正 www.ilib.cn 4. Establishment of three-dimensional solid and finite element model of temporomandibular joint with occlusion 带有咬合关系的颞下颌关节三维实体和有限元模型的建立 www.ilib.cn 5. Establishment of three-dimensional solid and finite element model of implant- supported mandibular first molar with crown 下颌第一磨牙种植修复体的三维实体和有限元模型的建立 www.ilib.cn 6. Establishment of three-dimensional finite element model for ascertainment of atlas fracture mechanism 寰椎三维有限元模型的建立及其骨折机制 www.ilib.cn 7. The establishment of three-dimension finite element model for orthodontic anchorage implant-bone interface 支抗种植体--骨界面三维有限元模型的建立 www.ilib.cn 8. First, a finite element model of clutch driven plate assembly was built, the stiffness and stress distribution were calculated; 根据离合器从动盘的工作原理建立了结构的有限元模型,计算了从动盘结构的刚度和应力分布; www.cmemo.org.cn 9. Simulation study of electrical impedance tomography based on approaching real finite-element model 在逼近真实脑有限元模型上实现电阻抗断层成像的仿真研究 www.wenloo.com 10. Establishment of Three-dimensional Finite Element Model of Post-inlay Restoration for Residual Crown of Lowers First Molar 嵌体修复下颌第一磨牙残冠的三维有限元模型的建立 www.ilib.cn 1. Finite Element Model for Steady-stage Characteristics Calculation for Cage Asynchronous Motor 一种计算笼型异步电机稳态特性的有限元模型 www.ilib.cn 2. Model Predictive Control of a complex rheological forming Process based on a Finite Element Model 基于有限元的复杂流变学过程模拟 www.qiyeku.com 3. Discussion on Finite Element Model of Continuous Reinforcement Cement Concrete Pavement 连续配筋水泥混凝土路面有限元模型探讨 www.ilib.cn 4. Dimensional finite element model of post inlay restoration of the first mandibular residual molar crown Lian Ke 建立带桩嵌体修复下颌第一磨牙残冠的三维有限元模型 www.zglckf.com 5. Comparison of Internal Fixations using Finite Element Model of Simulated Calcaneus Fractures 跟骨骨折内固定方法的有限元模拟比较 www.ilib.cn 6. Establishment of three-dimensional finite element model for implant as orthodontic anchorage 种植体支抗三维有限元模型的建立 www.ilib.cn 7. The establishment and verification of finite-element model of the synergies by soil and pipelines 土体与钢管线协同作用有限元模型的建立及验证 zhidao.baidu.com 8. Reconstruction of three-dimension finite-element model of upper end of tibia 胫骨上端三维有限元模型的建立 www.ilib.cn 9. Finite element model and approximate treatment of dynamics under chief & auxiliary degrees of freedom; 主、付自由度下的动力学有限元模型和近似处理。 www.gs.sjtu.edu.cn 10. Formulation of dynamic finite element model and active vibration control for piezoelectric sheets 压电薄板动力有限元及主动控制 168.160.184.78 1. Study on the Stress Evolution and Finite Element Model for the Interaction Among Strong Earthquakes 应力场演化与强震间相互作用的有限元模拟研究 www.ilib.cn 2. Application of multislice helical CT in the construction of three-dimensional finite element model of maxillary bone 多层螺旋CT在建立上颌骨三维有限元模型中的应用 www.ilib.cn 3. The construction and analysis of three-dimensional finite element model of human unilateral maxillary defect 单侧上颌骨缺损修复三维有限元模型的建立及力学分析 www.ilib.cn 4. Construction of three-dimensional finite element model of human edentulous maxilla and cranial skeleton 快速建立无牙颌上颌骨及颅骨三维有限元模型的方法探讨 www.ilib.cn 5. Progress and Methods of Founding Finite Element Model of Lumbar intervertebral Disc Degeneration 腰椎间盘退变有限元模型的建立方法及进展 www.ilib.cn 6. Construction of the three-dimensional finite element model of the temporomandibular joint on the basis of magnetic resonance images 关键词:颞下颌关节;磁共振成像;图像处理,计算机辅助;三维有限元模型 www.301dent.com 7. Prediction of Acoustics in Rigid Rooms with a Finite Element Model 应用有限元模型预测刚性界面房间声场 service.ilib.cn 8. A simple finite element model of laminated plate compartment and model analysis 一种夹层板结构车厢的有限元简化模型及模态分析 www.ilib.cn 9. Stress analysis of three-dimensional finite element model of fixed denture on mandible posterior teeth by CT scanning CT扫描建立下颌后牙固定义齿三维有限元模型后的应力分析 www.ilib.cn 10. Structural-safety-evaluation-oriented baseline finite element model of long-span cable-stayed bridge 面向结构安全评估的大跨斜拉桥基准有限元模型 www.ilib.cn 1. Development of a finite element model of canine segmental mandibular defect 节段性缺失的犬下颌骨有限元模型的建立 www.ilib.cn 2. The Building and Analysis of the Duo-servo Brake Finite Element Model 双向自增力鼓式制动器有限元模型的建立与分析 www.ilib.cn 3. Finite Element Model and Earthquake Stress Time-History Analysis of Reinforced Concrete Block Walls 配筋混凝土砌块墙有限元模型及地震应力反应时程分析 ilib.cn 4. Establishment of three-dimensional finite element model of TMJ for relation analysis with occlusion 颞下颌关节与咬合关系研究三维有限元模型的建立 168.160.184.78 5. Explicit finite element model for dynamic analysis of dam-reservoir-sediment-foundation system 重力坝-库水-淤砂-地基系统动力分析的时域显式有限元模型 www.ilib.cn 6. Establishment of three-dimensional finite element model of nickel titanium memory alloy tractor for CAD 用于计算机辅助设计的镍钛记忆合金牵引器有限元模型的建立 service.ilib.cn 7. Finite Element Model of Spine Lumbosacral Joint and its Validation 脊椎腰骶关节的有限元模型及其有效性验证 www.ilib.cn 8. Global Finite Element Model for Vibration Analysis to Circular Beam with Constrained Damping Layer 圆形截面约束阻尼梁整体有限元建模与振动分析 ilib.cn 9. The construction of three-dimensional finite element model of human mandibular alveolar atrophy 下颌骨牙槽嵴萎缩三维有限元模型与生物力学分析 www.ilib.cn 10. Parallel computation of finite element model with millions of DOF in geotechnical engineering 岩土工程百万以上自由度有限元并行计算 www.ilib.cn 1. Research on High Order Finite Element Model and Active Vibration Control for Flexible Space Structures 柔性空间结构高阶有限元模型与主动振动控制研究 www.ilib.cn 2. Applied Research on Finite Element Model of Prestressed Concrete and Reinforced Concrete 预应力及普通钢筋混凝土有限单元模型的应用研究 www.ilib.cn 3. Biomechanical Analysis of Finite Element Model of Lumbar Facet Joint During Manipulation 模拟推拿时腰椎小关节有限元模型的生物力学分析 www.ilib.cn 4. New Finite Element Model for Calculating Sensitivities of Capacitance Sensors 电容传感器场灵敏度分布计算的有限元模型 www.ilib.cn 5. Finite Element Model Analysis on the Cylindrical Elastic Fluid-Shell Interaction System 圆柱形弹性壳液耦合系统模态的有限元法分析 scholar.ilib.cn 6. Construction of three dimensional finite element model of human cranial-maxillary complex 颅上颌复合体三维有限元模型的建立 www.ilib.cn 7. Establishment of Three-dimensional Finite Element Model of Mandible with Dental Implant 含牙种植体下颌骨三维有限元模型的建立 www.ilib.cn 8. Dynamic Finite Element Model of Giant Magnetostrictive Transducer 超磁致伸缩换能器有限元动态模型的研究 www.ilib.cn 9. A Rotor Dynamics'Finite Element Model with Consideration of the Influential Effect of the Fluid 考虑流体作用的转子动力学有限元模型 ilib.cn 10. Suppositional sutural construction and application in the three-dimensional finite element model of craniofacial complex 虚拟骨缝在颅面复合体三维有限元模型中的构建及应用 www.ilib.cn 1. The Improved Finite Element Model of Cracked Metal Plates Repaired with Bonded Composite Patches 改进的金属裂纹板复合材料胶接修补的有限元模型 www.ilib.cn 2. Construction of three-dimensional finite element model of the first maxillary molar 上颌第一磨牙及其支持组织三维有限元模型的建立 service.ilib.cn 3. Study of Different Finite Element Model of Office Paper 办公纸张不同有限元计算模型的研究 www.ilib.cn 4. Application of genetic algorithm on structural finite element model updating 遗传算法在结构有限元模型修正中的应用 www.ilib.cn 5. A three-dimensional finite element model for simulating lumbar manipulations 模拟腰部推拿手法三维有限元模型分析 www.ilib.cn 6. Structure Dynamic Characteristic Simulation on the Finite Element Model of Machine Gun 基于有限元模型的机枪结构动态特性仿真 www.ilib.cn 7. Research of a new finite element model of lumbar motion segment 腰椎运动节段新型有限元模型研究 www.ilib.cn 8. Establishment of three-dimensional finite element model of actual dental implants 真实种植体三维有限元模型的建立 www.ilib.cn 9. Study on finite element model of degenerative lumbar spondylolisthesis 退行性变性腰椎滑脱的有限元模型研究 www.ilib.cn 10. The Application of Finite Element Model in the Rigidity and Strength Optimization Design of Engine Block 有限元在柴油机机体刚度和强度优化设计中的应用 service.ilib.cn 1. Three-dimensional finite element model of calcaneus and talus during different gait phases 不同步态位相跟、距骨应力分布的三维有限元分析 www.ilib.cn 2. A Finite Element Model Response Analysis on the Vibration of the Spinning Machine 剑杆织机振动问题的有限元模态响应分析 www.ilib.cn 3. Construction of Three-Dimensional Finite Element Model of Skull Maxilla and Dentition 构建颅骨上颌骨及牙列的三维有限元模型 www.ilib.cn 4. Error analysis of saddle boundary condition of suspension bridge finite element model 悬索桥模型鞍座边界条件的误差分析 www.ilib.cn 5. Finite element model of milling process sequence for frame monolithic components 框类整体结构件铣削加工顺序的有限元模型 service.ilib.cn 6. Finite Element Model of Continuously Armored Cement Concrete Pavement 连续配筋水泥混凝土路面的有限元模型探讨 www.ilib.cn 7. Study on the finite element model of shear connector in integration part of composite beam; 钢-混凝土连续组合梁在某些情况下需要按照部分抗剪连接设计。 www.dictall.com 8. Updating finite element model using precise modification method 基于精细修改法的有限元模型修正 www.ilib.cn 9. Developing three-dimensional finite element model of normal human mandible 正常人下颌骨的三维有限元模型的建立 www.ilib.cn 10. Establishment of three-dimensional finite element model of fractured ankle 踝关节骨折三维有限元模型的建立 www.ilib.cn 1. Construction of three-dimensional finite element model of maxillary first molar 上颌第一磨牙三维有限元模型的建立 www.ilib.cn 2. The construction of the three-dimensional finite element model and analog analysis of the maxillary first molar after RCT 上颌第一磨牙根管预备后的有限元模型的建立和受力分析 www.ilib.cn 3. Research on the Baseline Finite Element Model for Dynamic Analysis of Long Span Cable-stayed Bridges 大跨径斜拉桥动力分析基准有限元模型研究 www.ilib.cn 4. Three - dimensional Reconstruction of Finite Element Model of the Knee Joint According to Chinese Digital Human CT Data 基于中国数字人CT数据重建膝关节有限元模型 service.ilib.cn 5. Finite Element Model Building and Behavior of Prestressed Concrete Beam with FRP Tendons 预应力FRP筋混凝土梁的有限元建模与受力性能分析 service.ilib.cn 6. The construction of three-dimensional finite element model of human maxillary complex 上颌骨复合体三维有限元模型的建立 www.ilib.cn 7. The dynamic finite element model for composite cylinder construction 复合材料气缸结构动态有限元模型 www.ilib.cn 8. Study on Finite Element Model Updating of Nonlinear Structures Using Neural Network 基于神经网络的非线性结构有限元模型修正研究 www.ilib.cn 9. Construction of the Three- dimensional Finite Element Model of Knee Joint on the Basis of Magnetic Resonance Images 磁共振影像膝关节三维有限元模型的建立 service.ilib.cn 10. Automatic establishment of parameterized finite element model for complicated gears 复杂齿轮自动化及参数化有限元建模 www.ilib.cn 1. Finite Element Model for Analyzing the Stability of Continuously Welded Rail Track 无缝线路稳定性分析有限元模型 168.160.184.82:8080 2. Automatic generation of finite element model for concrete aggregate 混凝土骨料有限元模型自动生成方法 scholar.ilib.cn 3. Finite element model for nonlinear analysis of reinforced concrete core walls 钢筋混凝土筒体的非线性有限元分析模型 www.ilib.cn 4. The Simulation of tire's stiffness characteristics using finite element model 基于有限元理论的轮胎刚度特性的仿真研究 www.ilib.cn 5. Finite Element Model Updating Using Radial Basis Function Neural Network 基于径向基神经网络的有限元模型修正研究 www.ilib.cn 6. Valve Spring Dynamical Properties Analysis with GAP Finite Element Model GAP单元在气门弹簧动态特性有限元分析中的应用 www.ilib.cn 7. A Research on the Finite Element Model of the Multiple Material Biology Organ 多材质生物组织有限元模型快速生成方法研究 www.ilib.cn 8. Three-dimensional finite element model of the whole cervical spine 全颈椎三维有限元模型的建立 service.ilib.cn 9. Finite Element Model Updating Using Statistics Analysis 基于统计分析技术的有限元模型修正研究 www.ilib.cn 10. Improved Finite Element Model for Calculating Stresses in Bevel and Hypoid Gear Teeth 改进的有限元计算模型强调在锥和准双曲面齿轮的牙齿 blog.sina.com.cn 1. Equivalent finite element model of FRP honeycomb-type sinusoidal core panels FRP正弦波形夹心桥面板的等效有限元模型 service.ilib.cn 2. Dynamic finite element model updating using meta-model and genetic algorithm 一种利用等效模型与遗传算法的动态有限元模型修正方法 www.ilib.cn 3. An Accurately Represented Finite Element Model of Lumbar Motion Segment 腰椎活动节段精确有限元模型的建立 ilib.com.cn 4. Corrected and Validated Finite Element Model of an Aircraft according to Static Testing Data 借助静力试验实测值修正和确认全机有限元模型 www.ilib.cn 5. Finite element model of continuous roll smoothing and three-roll bending process 校平、滚弯连续加工的有限元模型与实现 service.ilib.cn 6. Establishment of three-dimensional finite element model of teeth by CAE software 模型转化法构建牙齿的三维有限元模型 www.ilib.cn 7. Several Important Problems for Updating Finite Element Model 有限元模型修正中若干重要问题 service.ilib.cn 8. A finite element model based on medical image for evaluating biomechanical stability of percutaneous vertebroplasty 一种基于影像特征经皮椎体成形术生物力学稳定性评估的有限元模型 www.ilib.cn 9. Finite Element Model for Dynamic Analysis of Highway Guardrail under Impact 高速公路护栏的冲击动力学分析有限元模型 www.ilib.cn 10. A New Finite Element Model for Plate-Beam Combined Structures with Non-standard Connection 非标准交接板梁组合结构的有限元建模新方法 www.ilib.cn 1. Finite Element Model for Curved Girder Bridges with Eccentric Supports 偏心支承曲线梁桥有限元模型 www.ilib.cn 2. Finite Element Model and Dynamic Character of Strain Expiratory Sensor 应变式呼气流量传感器的有限元模型与动态特性 service.ilib.cn 3. Finite Element Model Validation in Structural Dynamics 结构动力学有限元模型确认方法研究 service.ilib.cn 4. The Transfer Technology on Ship Initial Scantling Model to Finite Element Model 船舶初步结构设计模型向有限元模型的转换技术 168.160.184.78 5. Grid division way and density to finite element model computed result influence 网格划分方式及密度对有限元模型计算结果的影响 www.ilib.cn 6. The Finite Element Model and Mechanism Analysis for Burr Formation in Metal Cutting 金属切削毛刺形成的有限元模型及机理分析 www.ilib.cn 7. Construction of three-dimensional finite element model of palate 上颌腭骨三维有限元模型的建立 service.ilib.cn 8. Finite element model building for fire resistance analysis of steel frame beam 钢框架梁抗火分析有限元模型的建立 www.ilib.cn 9. The Finite Element Model of Large- span Cable- Stayed Bridge for Health Monitoring 大跨斜拉桥结构健康监测的有限元分析模型 www.ilib.cn 10. Finite element model of artificial lumbar disc replacement 人工腰椎间盘置换的有限元模型研究 www.ilib.cn |
随便看 |
|
英汉双解词典包含2704715条英汉词条,基本涵盖了全部常用单词的翻译及用法,是英语学习的有利工具。