forgings

the bottom of muscle department can be significantly improved by increasing the thickness of forgings bottom and improvement pad.

Tight scale is usually a problem encountered in forgings hardened from direct-fired gas furnaces having high-pressure burners.

Design of precision die forgings which used for steam turbine blades is the key technology to blade forged die and process design.

Press forgings. Press forgings use a slow squeezing action of a press, to transfer a great amount of compressive force to the workpiece.

Forgings yield parts that have high strength to weight ratio, thus are often used in the design of aircraft frame members.

The scope of the company is mainly engaged in production and process about various steel forgings and modules.

Castings and forgings and hydrogen brittleness sensitivity to the spare parts of the appropriate USES weak acid galvanizing.

The core of a nuclear power plant demands huge steel forgings that weigh up to 240 tonnes.

Spread out the chain, with the lozenge of forgings downwards, The tension chain must be on the outer side of the wheel.

These heavy ring-forgings are made of large ingots directly. There are inevitably shrinkage cavities, porosity and segregation in ingots.

Castings and forgings shall be so designed and manufactured that shall be free from defects.

Therefore, ultrasonic testing of forgings for industrial production areas especially in the industrial production of chemical significance.

304 austenitic stainless steel is one of the main materials of heavy forgings.

The forging factors which affect the inner quality of the medium-shaft forgings have been analyzed in the text.

Disc-ring sleeve forgings are similar in their shapes, and there exist overlaps and blank region in the traditional size scope division.

This standard is applicable to ordering, manufacturing and inspection of hydrogenerator rotating plate forgings.

Forgings are consistent from piece to piece, without any of the porosity, voids, inclusions and other defects.

The influence of shearing deformation on the internal quality of forgings in upsetting was studied through experimental test.

aerospace series . steel . forging stock and forgings . technical specification . part 3 : pre - production and production forgings.

Hydraulic press is an important smithery mechanism in producing the large-size forgings.

ALUMINIUM AND ALUMINIUM ALLOY DROP FORGINGS. GENERAL TECHNICAL DELIVERY CONDITIONS.

It has provided an effective method to avoid the crack of high-speed steel forgings.

The strength and ductility of forgings are better than that of castings.

The uncertainty evaluation method of beam path and equivalent size of defect for metal forgings and castings are analyzed.

The new type of dies has overcome the shortages of the former dies. The quality of trimming for forgings and. . .

Aluminium and aluminium alloys. Forgings. Part 2 : mechanical properties and additional property requirements.

The application foreground and market requirement of aluminium alloy forgings are analysed.

WELDABLE STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. HIGH YIELD STRENGTH ALLOY STEELS. GRADES AND TYPES.

WELDED STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. CARBON AND CARBON MANGANESE STEELS. GRADES AND TYPES.

Non-destructive testing of steel forgings. Part 4 : ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings.

Unhealed porosities and free surface of dendrites with crystalline steps were occasionally observed in aluminium alloy forgings.

Steel closed die forgings - General technical delivery conditions.

The methods increased the precision of forgings and extended the application area of the process of cross wedge rolling.

Specification for carbon steel forgings for pressure vessel components.

Aerospace series. Aluminium alloy forging stock and forgings. Technical specification. Part 2 : forging stock.

The conventional technologies for heavy forgings tend to generate crack origins.

Fasten and secure all forgings on the inner chain side with connecting rings. Continue to fasten the chain.

In this paper, the study of 6-DOF series-parallel robot is mainly used in heavy-duty forgings automated production area.

In order to increase the production efficiency, the blade forgings are usually made by the hammer within one stroke using screw press.

A big flanged forgings stamping was studied by cross extrusion, as well as its technology, appliance and feature of metallic flow.

WELDABLE STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. MO, MN-MO AND CR-MO ALLOY STEELS. GRADES AND TYPES.

GENERAL PURPOSE FORGINGS. STAINLESS STEELS.

If possible, forgings should be heat treated in the vertical position.

Non-destructive testing of steel forgings. Part 3 : ultrasonic testing of ferritic or martensitic steel forgings.

Steel die forgings - Tolerances on dimensions - Part 2 : upset forging made on horizontal forging machines.

The quality of large forgings is closely related with the quality of steel ingots.

In the testing of plate and forgings , transducer frequency shall usually be .

Besides, the crossing contrast test has teen made by using bar forgings, the test result shows that forging MB26 ingot is practicable.

Ltd. production and supply of geo-317L 00Cr19Ni14MO3, seamless steel pipe, round bar, pipe fittings, forgings, flanges, wire, fittings, etc.

At last the qualified forgings were gotten through the process trial.

Open die steel forgings for general engineering purposes - Part 2 : non-alloy quality and special steels.

Considering the forging properties and shaping demand of TC6 alloy thin-wall forgings, a new process was explored .

Aluminium and aluminium alloys - Forgings - Part 3 : tolerances on dimensions and form.

Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength.

Sharp corners are stress-risers in the forgings, as well as make the dies weak in service.

Steel forgings for pressure purposes - Part 1 : general requirements for open die forgings.

The axle is a kind of complicate forgings, whose reasonable computing model is the key of improving the forging technic.

With the development of new technology in aviation, it seems an inexorable trend that titanium alloy forgings will become larger and larger.

Steel die forgings - Tolerances on dimensions - Part 1 : drop and vertical press forgings.

The Secretary may, in accordance with customer requirements cut A3 # 45 # steel, custom-made all the forgings.

The hot extrusion process of magnesium alloy MB2 material with the asymmetric casing forgings has been studied in the paper.

When we have sourced parts overseas, we have experienced major quality issues with forgings and castings.

Forgings, including nozzle, flanges and One test Each Part tubesheets.

Non-destructive testing of steel forgings. Part 2 : penetrant testing.

The life of forge die has direct effects on cost and quality and productivity of forgings.

Product form includes ingot, billet, square, bars, plates, tubes, strip and various forgings such as rings, disks, axles, flange, ect.

Ti-alloy forgings are widely used in aero engine, the third grade fan vane of which is made of the typical TC6 alloy.

AP1000 main pipe entire forgings is one type of forgings difficulty to form.

The quality of high-quality, low price is your ideal choice for the processing of the forgings .

A proper lubricant is necessary for making good forgings.

Because of huge deformation of turbine blade in the process of forging, the defects, such as folds and cracks, appear in blade forgings.

Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard

Shanghai heavy machinery forgings plant in Shanghai-mounted crane machinery co. , Ltd. provides a guarantee up to a limit of $ 21, 900;

The Heat Treatment of the Heavy Wall Forgings for the Hydrogenation Reactor

Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)

Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Forgings

Specification for aluminium alloy forging stock and forgings - Technical specification - General requirements

Aluminium and aluminium alloys - Forgings - Mechanical properties and additional property requirements

Specification for aluminium alloy forging stock and forgings - Technical specification - Pre-production and production forgings

Blanking roll forging process design and shakedown of a complicated curved long-axis forgings

Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

Steel forgings for pressure purposes - Ferritic and martensitic steels with specified elevated temperature properties

Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service

Simulation of Tensile Stress Theory of Conventional Upsetting between Flat Plates for High Cylindrical Forgings

Non-destructive testing of steel forgings - Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings

The Application of the Sub-temperature Quenching for the Large Carbon Steel and Carbon Manganese Steel Forgings

Specification for aluminium alloy forging stock and forgings - Technical specification - Forging stock

Metallurgical Analysis of Centrifugal Impeller Forgings of an Aeroengine

The Application of the Blank Tempering and Quenching Process in the Manufacturing of the Hydrogenation Reactor Forgings

Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

The Reasonable Selection of the Forging Process and Reducing the Manufacturing Cost for the Forgings

The Numerical Simulation of the Upsetting-extruding Process Stress Field for the Heavy Disk Forgings

The Application of Copying Technology in Metallographic Examination of the Heavy Castings and Forgings

The Determination of the Sub-temperature Quenching Process Parameter for Large Low Carbon Alloy Steel Forgings

Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

Aluminium and aluminium alloys - Forgings - Technical conditions for inspection and delivery

Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service

Precipitation Hardening Cobalt-Containing Alloys Rod, Bar, Forgings and Forging Stock for High-Temperature Service

Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

Titanium and titanium wrought alloys forgings (hammer and drop forgings); technical delivery conditions

Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

The Material Specifications Range Used in Upsetting Forgings

The Thermal Healing Technical Research of the Non-plastic Deformation for Heavy Duty Forgings Inner Cracks

Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

orthopaedic implants - forgings - method for specifying forgings

The Forging Process of Controlling the Inclusion Defects for Heavy Disk Forgings and Its Application

Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings

Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

Steel forgings for pressure purposes - Nickel steels with specified low-temperature properties

Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

Standard Specification for Steel Forgings, General Requirements

Steel Forgings; Machining Allowances and Permissible Variations for Seamless Open-die Forged Bushes

Non-destructive testing of steel forgings - Ultrasonic testing of ferritic or martensitic steel forgings

The Quality Control of the Low Temperature Impact Toughness for the Forked Type Forgings

Steel forgings - Testing frequency, sampling conditions and test methods for mechanical tests

Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

The Research of the Upsetting Process for Controlling the Inclusion defects in Heavy Disk Forgings

Specification for Steel Forgings, Alloy, for Carburizing Applications

Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current

Precipitation-Hardening Nickel Alloy Bars, Forgings and Forging Stock for High-Temperature Service

Products: Seamless tubes, welded tubes, fittings, flanges, valves, forgings

Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Rolled and Welded Rings

Die forgings of aluminium and aluminium alloy--Dimensional tolerance and machining allowance

Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Pierced Discs

Technological Design and Measurement of Forgings Dimensions of Tapered Roller Bearing Inner Rings

Aerospace series - Steel , forging stock and forgings - Technical specification - Part 1: General requirements

Improving Normalizing Equipment to Enhance Normalizing Quality of Forgings

Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings

The Finite Element Simulation of the Upsetting Process for the Heavy Pan Forgings

Current Situation of Aluminum Forging Production and Application Prospect of Forgings

Machining allowances and tolerances for steel open die forgings on hammer--Forging without machining

Optimizing on Forging Process of Two-time Upsetting and Stretching for Large Forgings

Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

Open steel die forgings for general engineering purposes - General requirements

Standard Specification for Stainless Steel Forgings for Surgical Implants

Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Discs

Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current

Martensitic Stainless Steel Bars, Forgings and Forging Stock for High-Temperature Service

Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

A study of critical reduction for closing pores in heavy forgings

The Research of the Stainless Steel Heavy Forgings for the Fast Breeder Project

Application of Computer Simulation Forming to the Die Forgings Production for Aviation

Test methods for aluminium and aluminium alloy products - Part 2: Ultrasonic testing of plates, forgings and extrusions; Aerospace series

Standard Specification for Carbon Steel Forgings for Piping Applications

Machining allowances and tolerances for steel open dle forgings on hammer--Single throw crankshaft

Application Foreground of Forgings and States of Aluminium Alloy Forging Production

Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

Steel Forgings; Machining Allowances and Permissible Variations for Open-die Forged Bars

Aerospace; bars, rings, forgingstock and forgings of titanium and titanium alloys; technical specification

Aluminium and aluminium alloys - Forgings - Tolerances on dimensions and form

Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

Copper-nickel-silicon alloy rods, sections, forging stock, forgings and parts (heat treated)

Specification for mild steel billets, bars, forgings and parts (suitable for bearing shells)

Steel forgings for pressure purposes - Part 6: Austenitic, martensitic and austenitic-ferritic stainless steels

Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings

Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

Standard Specification for Age-Hardening Stainless Steel Forgings

Standard Specification for Zirconium and Zirconium Alloy Forgings

Drop Forgings of Wrought Magnesium Alloys; Permissible Variations

Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 1: General requirements

Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

Ultrasonic Testing Standards Comparison of Heavy Forgings for PWR Pressure Vessel

Steel forgings for pressure purposes - General requirements for open die forgings

Suggestions on Shortening Production Cycle of the Rotor Forgings

Steel Forgings, Carbon and Alloy, Quenched and Tempered for Pressure Vessel Components

Open steel die forgings for general engineering purposes - Non-alloy quality and special steels

Application of Annular Array Ultrasonic Testing Probe to the Inspection of Forgings

Development and prospective of heavy forgings stretching process

Steel forgings for pressure purposes - Weldable fine-grain steels with high proof strength

Open steel die forgings for general engineering purposes - Stainless steels

Drop Forgings of Wrought Magnesium Alloys; Technical Conditions of Delivery

Some Views on Industrial Structure Adjustment of Large Castings and Forgings Industry

Steel die forgings - Tolerances on dimensions - Drop and vertical press forgings

Machining allowances and tolerances for steel open die forgings on hammer--Shaft without steps

Alloy Steel Forgings for High-Strength Pressure Component Application

The Research of the Upsetting Process Theory for the Heavy Forgings

Standard Specification for Stainless Steel Forgings

Ultrasonic Examination of Austenitic Steel Forgings

Standard Specification for Magnesium-Alloy Forgings

Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

new graduate, experience of production or QC of castings, forgings, injection moulding, blue moulding or maching products;

Standard Specification for Titanium and Titanium Alloy Forgings

Forgings, Carbon Steel for Piping Components with Inherent Notch Toughness

Improves processes for high-strength steel castings and forgings for navy components

Production Process and Quality Control of Passenger Car Connecting Rod Forgings

Open steel die forgings for general engineering purposes - Alloy special steels

BRITISH STANDARD Steel forgings for pressure purposes Part 3: Nickel steels with specified low-temperature properties

Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels

Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

Ultrasonic Examination to Detect White Spots in Cylindrical Forgings

Standard Practice for Ultrasonic Examination of Heavy Steel Forgings

Machining allowances and tolerances for steel open die forgings on hammer--Disks and columns

Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

Implants for surgery - Requirements for production of forgings

Steel forgings - Method for ultrasonic examination

Study on Mechanism of Defects Originated from Inclusions in Processes of Heavy Forgings

Dimensional tolerance for steel die forgings (upsetting)

Machining allowances and tolerances for steel open die forgings on hammer--Disk swith holes

Aerospace series Steel, forging stock and forgings - Technical specification - Part 2: Forging stock

Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts

Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

Metallographic grading atlas and assessing method for steel die forgings

Standard Test Method for Magnetic Particle Examination of Steel Forgings

The Application of New FM Forging Method in Heavy Axis Forgings Production

Non-destructive testing of steel forgings - Penetrant testing

Innovation Research and Development Tactics of Heavy Forgings

Main Products: Manufacture of Castings & Forgings

The Modern Integrated Study Methods on the Hot Forming of the Large Forgings

dimensional tolerance for steel die forgings (hammer and press forging)

High Precision Temperatuer Control of Vertical Heat Treatment Electric Furnace for Heavy Power Forgings

Carbon and alloy steel forgings for pressure vessels for low-temperature service

Machining allowances and tolerances for steel open die forgings on hammer--Rings

Manufacture of High Pressure Liquid Hydrogen Vessel Forgings

Drop Forgings of Wrought Magnesium Alloys; Design Principles

Structural steel grades and mechanical property for forgings

Crack Causes and solutions for Protrusion Buildup Welding on Shell Forgings

Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties

Alloy steel forgings for pressure vessels for high-temperature service

Steel Forgings; Machining Allowances and Permissble Variations for Seamless Open-die Forged Rings

Choose of Penetration Test and Magnetic Particle Test for Castings and Forgings

Magnesium impression die machined forgings

Composite impression die machined forgings

Beryllium impression die machined forgings

Study on Numerical Simulation of Heat Treatment Process for Heavy Forgings

Steel, Closed-Impression Die Forgings for General Industrial Use

CAD Technology for Tooth Profile of Semi-Precision Forgings of Duplicate Gears

Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings

Improvement of Thermal Efficiency of Abroad Turbine and Development of Rotor Forgings Material

A Practical AVG Compensation Method of Ultrasonic Testing for Steel Forgings

Methods of ultrasonic examination for carbon and low alloy steel forgings

Specification for forging stock, bars, extruded sections and forgings of 99% aluminium

Selection and Application of Die Steels to Precision Mould of Buffer Forgings

Influence of Die Design on Metal Streamline of Aluminium Alloy Close-die Forgings

Titanium impression die machined forgings

Aluminum impression die machined forgings