网站首页  词典首页

请输入您要查询的英文单词：

　

单词 forging die
释义

forging die

美 
英 
  • un.锻模
  • 网络锻造模具；锻造成形模具；锻压机

英汉

网络释义

un.
1.
锻模

例句

释义:
锻模,锻造模具,锻造成形模具,锻压机
1.
As the die adopts some unique design, it also can be used for reference when design hydraulic forging die for similar parts.
模具的某些独特设计具有代表性，可供同类零件液锻模设计时参考。
www.chemyq.com
2.
The process of tectonic deformation in the plateau can be compared with the "forging die process" used in the machinery industry.
其构造形变过程可以同机器制造业中的《锻模加工》相比拟。
www.geophy.cn
3.
To improve and stabilize the service life of hot-forging die fabricated by cast die steer, the failure modes and mechanism were analyzed.
为了稳定和提高精铸热锻的使用寿命，研究了其失效形式和机理。
www.ceps.com.tw
4.
The teeth of gear named fine forging gear can be formed directly by the forging die without chip-removal machining.
精锻齿轮，是指齿轮的轮齿直接模锻成形且无需切削加工的齿轮。
paper.pet2008.cn
5.
The forging die has no draft angle and the material utilization rate is increased about 12. 5%.
该模具结构使锻件的外形略去拔模斜度，材料利用率提高约12.
rjggy.net
6.
This produces a fully dense component with the shape of the forging die and appropriate mechanical properties.
这能生产具有锻模形状和合适机械性能的充分致密零件。
www.mapeng.net
7.
This paper presents the development of a new type build-up welding rod used for hot forging die.
研究了一种新型热锻模堆焊焊条。
www.chemyq.com
8.
According to the structure of the final forging die, the flash groove is studied and coded into a separate sub-function.
根据锻模设计要求，研究了分模面、毛边槽的设计并编制了相应模块；
www.fabiao.net
9.
The working process and character of the designed cold precision forging die for bevel gear was analyzed.
对该冷精锻模的工作过程、特点等进行了分析。
rjggy.net
10.
Generally the damage of forging die has four different damage mechanisms: worn, fatigue, transform and hot crack.
锻模的损坏可以分为四种不同的损坏机理：磨损、机械疲劳、塑性变形以及热疲劳裂纹（热裂纹）。
www.juhe8.com
1.
The lifetime of hot forging die decreases greatly owing to softened layers brought by high thermal loadings.
热锻模寿命由于高的热载荷引起其表面层软化而大大下降。
www.ceps.com.tw
2.
According to these ideas, the software was developed. The design criteria of forging-die flash sizes with the software used were given.
以此为依据开发了该软件，并给出了利用该软件获得的锻模飞边尺寸设计准则。
www.ceps.com.tw
3.
Forging die is the most suitable for High Speed Milling application, because of its high hardness I material and lower surface roughness.
而各式模具中又以鍜模最为适合，因其模具材料硬度较高且模穴表面粗度要求较低。
dict.bioon.com
4.
The paper gives out structure of tilting pin type hydraulic forging die for producing frame of shaker.
给出了震动器机壳斜销式液锻模具设计结构。
www.chemyq.com
5.
The bevel gear's cold forging die was designed based on the principles of cold precision forming.
基于冷锻成形原理，对锥齿轮冷精锻模进行了设计。
rjggy.net
6.
Simulation Analysis for Effects of the Parameters on the Surface Temperature of a Hot Forging Die
工艺参数对热锻模表层温度的影响模拟分析
www.ilib.cn
7.
On-the-spot welding repair for chap cracking in the surface of forging die mould cavity of caterpillar joint
链轨节终锻模型腔表面龟裂的现场补焊
service.ilib.cn
8.
Development of Build-up Welding Rod Used for Wear-Resistance and Cold-Heat Fatigue Resistance Hot Forging Die
热锻模耐磨耐冷热疲劳堆焊焊条的研制
ilib.cn
9.
Industry: Forging Machine; Forging Die; Forging; Pneumatic components; Hardware; Metal stamping parts; Pressure processing;
所属行业：锻压机床；锻造模；锻件；气动元件；五金配件；五金冲压件；压力加工；；
www.integrity-enterprises.net
10.
Industry: Road machinery; Loading Machinery; Mining Machinery; Municipal and environmental machinery; Forging Die; Spring;
所属行业：路面机械；装载机械；挖掘机械；市政和环境卫生机械；锻造模；弹簧；；
www.integrity-enterprises.net
1.
Industry: Forging Die; Assembly type pneumatic tools; Other pneumatic tools; Pneumatic shovel, hammer; Sandpaper; Other General Hardware;
所属行业：锻造模；装配类气动工具；其他气动工具；气动铲、锤；砂纸；其他通用五金配件；；
www.integrity-enterprises.net
2.
By electrolytic machining make and revise negative electrode used to make forging die
锻模电解加工工具电极的反拷和修正方法
www.ilib.cn
3.
Industry: Stamping die; Forging Die; Wire Drawing Die; Molding; Metal stamping parts; Metal mold; Pressure processing; Hardware Tools;
所属行业：冲压模；锻造模；拉丝模；成型模；五金冲压件；五金模具；压力加工；五金工具加工；；
www.integrity-enterprises.net
4.
Research on Surface Treatment Technique for Improving Service Life of Forging Die
提高锻模寿命的表面处理技术研究
service.ilib.cn
5.
Heat Treatment Technology for Increasing Service Life of Hot Forging Die of Bearing Rings
提高套圈热锻模使用寿命的热处理工艺
www.ilib.cn
6.
Industry: Animal Toys Set; Auto Parts Processing; Integrated companies; Stamping die; Forging Die; Glass Processing;
所属行业：套装动物玩具；汽摩配件加工；综合性公司；冲压模；锻造模；玻璃加工；；
www.integrity-enterprises.net
7.
Design of Hydrostatic Forging Die for the Upper Cover of the Lamp in the Middle Line of the Runway
机场跑道中线灯上盖液锻模设计
ilib.cn
8.
Industry: Casting; Forging Die; Metal mold; Forging; Gear cutting machines; Non-ferrous metal strip; Smelting equipment;
所属行业：铸件；锻造模；五金模具；锻件；齿轮加工机床；有色金属带材；冶炼成套设备；；
www.integrity-enterprises.net
9.
Industry: Special steel; Mold equipment; Casting mold; Forging Die; Industrial boilers and accessories; Rotor pump;
所属行业：特殊钢材；模具设备；铸造模；锻造模；工业锅炉及配件；转子泵；；
www.integrity-enterprises.net
10.
Analysis of the Hot Die Forging Process for the Tie Rod by Finite Element Method and Prediction of the Forging Die Life
连杆热模锻过程有限元分析及锻模寿命预测
www.ilib.cn
1.
Analysis of Losing Efficacy of Valve Forging Die and Measures for Improving Life of Dies
气门锻模的失效分析及提高寿命措施的探讨
www.ilib.cn
2.
Industry: Packaging Line; Machine parts processing; Stamping die; Forging Die; Mold equipment; Molding;
所属行业：包装生产线；机械零部件加工；冲压模；锻造模；模具设备；成型模；；
www.integrity-enterprises.net
3.
Raising Service Life of Forging Die by Adopting Secondary Tempering
采用二次回火提高锻模使用寿命
www.ilib.cn
4.
A New Type of Finish Forging Die with an Energetics Mechanism with Backpressure for Spur Gear Blanks
有背压力能机构的新型圆柱齿轮坯精锻模
ilib.cn
5.
Industry: Machine parts processing; Smelting process; Hardware Tools; Casting mold; Forging Die;
所属行业：机械零部件加工；冶炼加工；五金工具加工；铸造模；锻造模；；
www.integrity-enterprises.net
6.
Application of the Step-by-Step Regressive Analysis to the Design Criterion Mining of Forging-Die Flash Sizes
逐步回归分析在锻模飞边尺寸设计准则挖掘中的应用
www.ilib.cn
7.
Study on the Surfacing Welding Technology with Low-Carbon Maraging Hardened Alloy for Manufacturing Bimetal-Forging Die
堆焊低碳马氏体时效硬化合金制造双金属锻模的工艺研究
ilib.cn
8.
Industry: Casting mold; Forging Die; Casting; Casting; Machine parts processing; Molding;
所属行业：铸造模；锻造模；铸件；铸造；机械零部件加工；成型模；；
www.integrity-enterprises.net
9.
Industry: Tools, fixtures; Wire Drawing Die; Cutting; Forging Die; Chain wheel; Pressure processing;
所属行业：刀具、夹具；拉丝模；切削加工；锻造模；链轮；压力加工；；
www.integrity-enterprises.net
10.
Theoretical and Experimental Study of Roll Forging Die Design
辊锻模具设计的理论及试验研究
www.ilib.cn
1.
Industry: Plastic mold; Rubber mold; Stamping die; Casting mold; Forging Die; Rapid economic mold; Hardware Tools;
所属行业：塑料模；橡胶模；冲压模；铸造模；锻造模；快速经济模具；五金工具加工；；
www.integrity-enterprises.net
2.
Industry: Cutting; Connector; Other mold; Tools, fixtures; Forging Die; Other tools, fixtures;
所属行业：切削加工；接头；其他模具；刀具、夹具；锻造模；其他刀具、夹具；；
www.integrity-enterprises.net
3.
Study on Selecting Material and Composite Carburizing Strengthening Treatment for Heat Forging Die
热镦开式模选材与复合渗强化处理研究
www.ilib.cn
4.
Selection of Matrix Material and Study on Composite Carburizing Strengthening Treatment for Nut Heat Forging Die
螺帽热镦凹模的选材与复合渗强化处理研究
service.ilib.cn
5.
Industry: Milling; Casting mold; Forging Die; Molding; Mold equipment; Tools, fixtures;
所属行业：铣床；铸造模；锻造模；成型模；模具设备；刀具、夹具；；
www.integrity-enterprises.net
6.
Industry: Rubber mold; Floor drain; Stamping die; Plastic mold; Forging Die; Casting mold; Hardware Agents;
所属行业：橡胶模；地漏；冲压模；塑料模；锻造模；铸造模；五金工具代理；；
www.integrity-enterprises.net
7.
Reverse Copying and Amendment of Tool Electrode for the Electrochemical Machining of Hot Forging Die
热锻模电解加工工具电极的反拷和修正
www.ilib.cn
8.
Intelligent Optimization Technology for Extrusion Forging Die on the Basis of Inductive Learning
基于归纳学习的挤压锻造模智能优化技术
service.ilib.cn
9.
Industry: Casters, Caster; Forging Die; Other industry-specific equipment;
所属行业：脚轮、万向轮；锻造模；其他行业专用设备；；
www.integrity-enterprises.net
10.
Designing and Practicing of Loose Tooling Forging Die of Circumgyrating Forging for Universal Purpose
回转体类锻件锻造胎模通用化的实践及设计
service.ilib.cn
1.
It is shown that the improper design of bending lower die and pre-forging die is the main cause of crankshaft's folding;
研究发现，弯曲下模和预锻模设计不合理是造成曲轴锻件折叠缺陷的主要原因；
rjggy.net
2.
Reasonable Design and Manufacture of the Cold Rotary Forging Die for the Cam Plate of the VE Pump
VE泵端面凸轮冷摆辗模具的设计与加工
service.ilib.cn
3.
Industry: Special steel; Mold standard parts; Plastic mold; Stamping die; Casting mold; Forging Die;
所属行业：特殊钢材；模具标准件；塑料模；冲压模；铸造模；锻造模；；
www.integrity-enterprises.net
4.
Application and its trend of finite element method in analyzing cold forging die
有限元法在冲压模具分析中的应用及展望
www.ilib.cn
5.
Industry: Software Agents; Forging Machine; Foreign Machine; Forging Die;
所属行业：软件代理；锻压机床；国外机床；锻造模；；
www.integrity-enterprises.net
6.
The Flange Wear Analysis and Improved Measurement of the Crankshaft Finish Forging Die
曲轴终锻模凸缘部位的磨损分析及提高寿命的措施
www.ilib.cn
7.
Industry: Forging Die; Casting mold; Stamping die; Mold equipment; Galvanized pipe; Body;
所属行业：锻造模；铸造模；冲压模；模具设备；镀锌管；阀体；；
www.integrity-enterprises.net
8.
Industry: Forging Die; Casting mold; Stamping die; Plastic mold; Rapid economic mold; Wire Drawing Die;
所属行业：锻造模；铸造模；冲压模；塑料模；快速经济模具；拉丝模；；
www.integrity-enterprises.net
9.
Subzero Treatment of Cold-Forging Die Made of High Speed Steel and It's Application
高速钢冷作模具深冷处理及应用
www.ilib.cn
10.
Industry: Grinding wheel; Stamping die; Casting mold; Forging Die; Wire Drawing Die; Molding;
所属行业：砂轮；冲压模；铸造模；锻造模；拉丝模；成型模；；
www.integrity-enterprises.net
1.
Industry: Casting mold; Stamping die; Plastic mold; Forging Die; Molding; EDM, wire cutting;
所属行业：铸造模；冲压模；塑料模；锻造模；成型模；电火花、线切割；；
www.integrity-enterprises.net
2.
Industry: Stamping die; Casting mold; Forging Die; Molding; Mold standard parts; Other mold;
所属行业：冲压模；铸造模；锻造模；成型模；模具标准件；其他模具；；
www.integrity-enterprises.net
3.
Industry: Plastic mold; Rubber mold; Stamping die; Casting mold; Forging Die; Fastener;
所属行业：塑料模；橡胶模；冲压模；铸造模；锻造模；紧固件；；
www.integrity-enterprises.net
4.
Industry: Plastic mold; Stamping die; Rubber mold; Casting mold; Forging Die; Molding;
所属行业：塑料模；冲压模；橡胶模；铸造模；锻造模；成型模；；
www.integrity-enterprises.net
5.
Industry: Rubber mold; Casting mold; Molding; Plastic mold; Stamping die; Forging Die;
所属行业：橡胶模；铸造模；成型模；塑料模；冲压模；锻造模；；
www.integrity-enterprises.net
6.
shaper solid forging die split mold squeezing die sweeping mold three plates mold unit mold unscrewing mold
定型模套整体锻模双并式模具挤压模平刮铸模三片式模具单元式模具退扣式模具
wenku.baidu.com
7.
Industry: Plastic mold; Rubber mold; Stamping die; Wire Drawing Die; Casting mold; Forging Die;
所属行业：塑料模；橡胶模；冲压模；拉丝模；铸造模；锻造模；；
www.integrity-enterprises.net
8.
The Technology for Bending the Reinforcing Rings by Rolling and Design of the Forging Die
加强环滚弯成形工艺及锻模设计
www.ilib.cn
9.
The Invalidation Analysis and Strengthen Treatment of Hot Forging Die for Automobile Gears
汽车齿轮胎热锻模失效分析及强化处理
www.ilib.cn
10.
Industry: Mirror Class; Lights; Plastic mold; Rubber mold; Stamping die; Forging Die;
所属行业：镜类；车灯；塑料模；橡胶模；冲压模；锻造模；；
www.integrity-enterprises.net
1.
Industry: Casting mold; Forging Die; Molding; Plastic mold; Stamping die; Other mold;
所属行业：铸造模；锻造模；成型模；塑料模；冲压模；其他模具；；
www.integrity-enterprises.net
2.
Industry: Stamping die; Forging Die; Metal mold; Mold equipment; Mold standard parts;
所属行业：冲压模；锻造模；五金模具；模具设备；模具标准件；；
www.integrity-enterprises.net
3.
Renovation of the forging die design for the thin-wall workpiece with holes
带孔薄壁件锻模结构设计的改进
www.ilib.cn
4.
Research of Expiration Analysis and Strengthened Processing for Heat Forging Die
热锻模失效分析及强化处理的研究
service.ilib.cn
5.
Research on Computer Aided Investment Casting Technology of Isotherm Forging Die
叶片等温锻模具的计算机辅助精密铸造工艺研究
service.ilib.cn
6.
Industry: Plastic mold; Rubber mold; Forging Die; Stamping die; PM model; Mold standard parts;
所属行业：塑料模；橡胶模；锻造模；冲压模；粉末冶金模；模具标准件；；
www.integrity-enterprises.net
7.
Methods Improving Service Life of Hot Forging Die
提高热锻模具使用寿命的方法
ilib.cn
8.
Industry: Machine parts processing; Forging Die; Forging;
所属行业：机械零部件加工；锻造模；锻件；；
www.integrity-enterprises.net
9.
Industry: Mold standard parts; Stamping die; Spring; Forging Die; Plastic mold;
所属行业：模具标准件；冲压模；弹簧；锻造模；塑料模；；
www.integrity-enterprises.net
10.
Industry: Plastic mold; Stamping die; Forging Die; Mold standard parts; Spring;
所属行业：塑料模；冲压模；锻造模；模具标准件；弹簧；；
www.integrity-enterprises.net
1.
Industry: Plastic mold; Stamping die; Casting mold; Forging Die; Manhole Cover;
所属行业：塑料模；冲压模；铸造模；锻造模；井盖；；
www.integrity-enterprises.net
2.
Industry: Fastener; Rubber mold; Casting mold; Forging Die; Plastic mold;
所属行业：紧固件；橡胶模；铸造模；锻造模；塑料模；；
www.integrity-enterprises.net
3.
Industry: Mold; Stamping die; Plastic mold; Rubber mold; Forging Die; Molding;
所属行业：模具；冲压模；塑料模；橡胶模；锻造模；成型模；；
www.integrity-enterprises.net
4.
Design of the Fine Forging Die for the Gearshift Gears of Motorcycles
摩托车档位齿轮精锻模设计
ilib.cn
5.
Industry: PM model; Stamping die; Casting mold; Forging Die; Wire Drawing Die; Molding;
所属行业：粉末冶金模；冲压模；铸造模；锻造模；拉丝模；成型模；；
www.integrity-enterprises.net
6.
Technological analysis of the forging die for connecting rods
连杆锻模的工艺分析
www.ilib.cn
7.
High Temperature Microstructure and Property of WC Ceramic Layer on Surface of Roll Forging Die by Powder Feeding Laser Cladding
辊锻模具表面送粉激光熔覆WC陶瓷层的高温组织与性能
www.ilib.cn
8.
Industry: Casting mold; Forging Die; PM model; Rapid economic mold; Molding;
所属行业：铸造模；锻造模；粉末冶金模；快速经济模具；成型模；；
www.integrity-enterprises.net
9.
Computer Aided Design for Precision Forging Die of the Airfoil Blade
面向精锻叶片的模具计算机辅助设计研究
ilib.cn
10.
Forming Process and Defects Analysis on Forging Die Made by Methods of Squeeze Casting
热锻模挤压铸造成形过程及产品缺陷分析
service.ilib.cn
1.
Comprehensive technical measures for prolonging the life of the hot press roll forging die
延长辊锻热成形模寿命的综合技术措施
www.ilib.cn
2.
The Factors Affecting the Life of the Forging Die for the Cutting Picks and Pick Pedestals
影响截齿齿座锻模寿命的因素
ilib.cn
3.
Design of the New-Typed Forging Die for the Blanks of Driven Spur Gears
圆柱从动齿轮坯新型锻模设计
ilib.cn
4.
The Liquid Die Forging Process Experiment of the Die Steel Forging Die
模具钢质锻模的液态模锻试验
ilib.cn
5.
The Developing of the Parameterized Design System for Gear Blanks Flashless Forging Die
齿轮坯闭式模锻模具参数化设计系统的研制
ilib.cn
6.
Industry: Casting mold; Forging Die; Stamping die; Rubber mold;
所属行业：铸造模；锻造模；冲压模；橡胶模；；
www.integrity-enterprises.net
7.
Alloying Design and High-temperature Wear Property of Cast Hot-forging Die Steel
精铸热锻模具钢的合金成分设计及其高温磨损性能研究
www.ilib.cn
8.
Failure analysis and damage protection of hot forging die for half and half copper-hoop
铜抱箍热锻模具失效分析与防损措施
www.ilib.cn
9.
The Research of Forging Die Technology for the Aluminum Props up Parts
铝支撑件的模锻工艺研究
www.ilib.cn
10.
Design of the Closed Precision Forging Die for Spiral Bevel Gear
螺旋伞齿轮闭式精锻模设计
ilib.cn
1.
single cavity mold split forging die sprueless mold stretch form die swing die trimming die universal mold yoke type die
单腔模具拼合锻模无注道残料模具拉伸成形模振动模具切边模通用模具轭型模模具厂常用之标准零配件
wenku.baidu.com
2.
Design and Manufacture of Horizontal Upsetting and Forging Die
卧式镦锻模设计制造
service.ilib.cn
3.
Design of Floating Precision Forging Die for Cylindrical Gears
圆柱齿轮浮动式精锻模设计
ilib.cn
4.
Research on the stress and strain evolution of aluminum alloy hot forging die;
铝合金热锻模具结构中的应力应变演变过程分析
wenku.baidu.com
5.
Discussion of Material Selection and Manufacture Process of Hot Forging Die
热锻模具选材与制造工艺探讨
ilib.cn
6.
The Application Prospects of Forging Die by Squeezing Casting
挤压铸造制备热锻模具的应用前景
service.ilib.cn
7.
Material Selection and Heating Treatment of Small-size Hot Forging Die
小型热锻模具的选材及热处理工艺
www.ilib.cn
8.
High speed manufacturing process of precision forging die and UG NC programming
精锻模具高速加工工艺及UG的数控编程
www.ilib.cn
9.
CAD Computer Aided Forging Die Design of Three-dimension Parameterization Based on Characteristics
基于特征的三维参数化锻模
www.ilib.cn
10.
Research on the Effect on Temperature Stress of Physical Parameters of Hot Forging Die and Their Change
热锻模物理性能参数及其变化对温度应力的影响探讨
service.ilib.cn
1.
The Group Technology of Forging Die for Engine Valve Based on High-frequency Narrow-Pulse Current Electrolytic Machining
高频窄脉冲电解加工基础上的气门锻模制造成组技术
service.ilib.cn
2.
Strengthening of Cast Hot-forging Die Steel by Composited Surface
铸造热锻模具钢表面复合强化
ilib.cn
3.
On Computing Damage to Hot Forging Die Due to Thermal Loading
锻模热负荷参数的工程计算方法
www.ilib.cn
4.
Design and Manufacture of Tooth Die for Precision Forging Die Spur Bevel Gear
直伞齿轮精锻模齿模的设计与制造
ilib.cn
5.
Dual-Metal Hard Facing Heap Weld Technology of Recovering Hot Forging die
修复热锻模的双金属堆焊技术
www.ilib.cn
6.
Design of the New-Typed Forging Die for the Planet Gears
新型行星齿轮锻模设计
ilib.cn
7.
The Research of Large-scale High-temperature Hot Forging Die Process of Quenching
大型热锻模高温淬火工艺初探
www.ilib.cn
8.
Design of a General Warm Forging Die
通用温锻模具设计
service.ilib.cn
9.
Forging Technology And Forging Die Design of Divided-moved Ware
分动器模锻造工艺及锻模设计
www.ilib.cn
10.
Forming Process and Forging Die Design for the Forging Process of Oil Pipe
油管镦锻成形工艺及模具设计
www.ilib.cn
1.
High-Temperature Wear of Cast Hot-Forging Die Steel Modified by Rare Earth
稀土变质热锻模具铸钢高温磨损性能的研究
www.ilib.cn
2.
Improvement of Heat Treatment Process for Heat Forging Die
热锻模热处理工艺改进
www.ilib.cn
3.
Normal and anomalous failures of finish hot-forging die for air valves
气门热精锻模具的正常与异常失效
scholar.ilib.cn
4.
Design of Finish Forging Die for American-style Octagon Hammer
美式八角锤终锻模设计
www.ilib.cn
5.
Compound Forging for Gears and Design of Forging Die for Stop-Push Washer
齿轮复合模锻及止推垫锻模设计
www.ilib.cn
6.
Optimization expert system of hammer forging die materials
锤锻模具材料优化专家系统
www.ilib.cn
7.
Computer Aided Design for Connecting-rod Forging Die
计算机辅助连杆锻模设计
ilib.cn
8.
Effect of Cr and Mo on High-Temperature Wear Behavior of Cast Hot-Forging Die Steels
铬和钼对精铸热锻模具钢高温磨损行为的影响
www.ilib.cn
9.
High speed machining for forging die of motorcycle crank
摩托车曲柄锻模高速加工
service.ilib.cn
10.
Application of Hot-forging Die in Precision Casting
精铸热锻模具的应用研究进展
service.ilib.cn
1.
Alloy Steel Forging Die Produced by Squeeze Casting
用挤压铸造工艺生产合金钢锻模
service.ilib.cn
2.
The improvement of forging die of adjustable pliers
管子钳钳口锻模的分析改进
www.ilib.cn
3.
Analysis of broken failures heavy-duty hammer's forging-die
大型热锻模破裂实例分析
www.ilib.cn
4.
Design of the Forging Die for the Valve Base
阀座锻模设计
www.ilib.cn
5.
The Graphical Input in the Preprocess of Forging Die CAE System
锻模CAE系统前处理中图形的输入
service.ilib.cn
6.
Optimaled design for forging die of small and medium connecting rod for forging hammer
中小型连杆锤上模锻优化设计
168.160.184.82:8080
7.
Repair welding of crankshaft forging die
曲轴锻模的焊接修复
www.ilib.cn
8.
Design of Die for Forging Die Module in Squeezing Casting
锻模模块的挤压铸造模具设计
www.ilib.cn
9.
Upset forging die design of new sucker rods
异形抽油杆镦锻模具设计
www.ilib.cn
10.
Systems Analysis on the Failure of Steel Forging Die
钢制锻模失效的系统分析
www.ilib.cn
1.
Study on the Hot Crack of Forging Die Made by Squeeze Casting
挤压铸造锻模件热裂纹的初步研究
www.ilib.cn
2.
The Application of Boronizing on Hot-Forging Die
渗硼在热锻模上的应用
www.ilib.cn
3.
New Technology of Repair of Forging Die by Built-Up Welding
堆焊修复锻模新工艺
www.ilib.cn
4.
The Failure Analysis of Bracket Forging Die
支架类锻模失效分析
www.ilib.cn
5.
Design of Heat Precision Forging Die for Rapid Gear
快档齿轮热精锻模具设计
ilib.cn
6.
Material Selecting of Cold forging Die
冷镦模材料的选取
www.ilib.cn
7.
Design of Forging Die for Starting Motor Tight Lid
起动电机紧固盖的锻模设计
service.ilib.cn
8.
Squeeze Casting for Gear Wheel Forging Die
圆柱体小型齿轮锻模挤压铸造
ilib.cn
9.
Knowledge Management System in Supporting Forging Die Design Based on KBE
基于KBE支持锻模设计工程知识管理系统开发
www.ilib.cn
10.
Methods and Steps for Lengthen the Life of Precision Hot Forging Die
提高精密热锻模寿命的方法和措施
www.ilib.cn
1.
forging die (die steel, drawing)
锻模（锻模钢，锻件图）
www.ebigear.com
2.
Center distance of forging die
锻模中心间距
www.powerdict.com
3.
Design of Cooling System of Warm Forging Die
温锻模具冷却系统设计
service.ilib.cn
4.
Design of forging die group
锻模成组设计
www.ilib.cn
5.
Study on Way for Improving the Life of Forging Die
提高锻模寿命的途径
www.ilib.cn
6.
Development of Forging Die Design System Based on UG
基于UG的锻模设计系统开发
ilib.cn
随便看

　

英汉双解词典包含2704715条英汉词条，基本涵盖了全部常用单词的翻译及用法，是英语学习的有利工具。

　

Copyright © 2004-2022 Newdu.com All Rights Reserved
更新时间：2024/12/26 23:10:49