gas turbine

As the main Power Plant of the aircraft, aviation gas turbine is widely used for various of aircraft, known as the plane "heart" .

The gas turbine's compactness, weight, and multiple fuel applications make it a natural power plant for offshore platforms.

Example applications for this type of sensor would be in the measuring of combustion pressure in an engine cylinder or in a gas turbine.

These inspections and repair intervals can be very expensive depending on the type of industry the gas turbine is powering.

The experimental investigation of the operational characteristics of fuel nozzle for a heavy gas turbine was performed.

Electronic control techniques can be designed to take full advantage of quick response inherent in a gas turbine propulsion system .

Combustor is an important element of gas turbine, in which one of the key technologies is how to avoid and control combustion oscillations.

Aging of air filter paper is one of the main factors that threaten the safe operation of gas turbine.

The company manufactures a range of components for aerospace and industrial gas turbine engines.

GE supplied two gas-turbine generators at a local power plant and wind turbines for a project in Hebei that supplies power to the capital.

Experimental investigation results from an injector group of double fuel for a heavy-duty gas turbine were presented.

The heat from external air which is absorbed by the heat absorber is converted into the power output of the gas turbine.

In energy it depends on whether gas turbine technology will grow faster than coal or wind or other things.

In an IC (intercooling) cycle gas turbine, intercoolers are components that exercise a major influence on the gas turbine performance.

The measurement of the dynamic gap of the gas turbine is one of the difficulties in this industry.

A swirl vane is independently connectable to a central hub assembly of a gas turbine.

The main power generator groups in platform power stations are basically piston natural gas generator group and gas turbine generator group.

An engineering example of marine gas turbine rotor is applied to the verification of the provided model.

Especially for humid gas turbine cycle, the latent heat and water recovery can improve the system economy.

The blade of a gas turbine fractured and the unit stopped unnaturally in a refinery.

Presents necessary data and helpful suggestions to assist engineers to obtain optimum performance for any gas turbine, under all conditions.

Subsequent validation efforts show that the method can satisfy the accuracy requirement in gas turbine system simulation.

The service condition and superalloys for combustion chamber of gas-turbine engines have been introduced.

A combustion chamber and its igniters, injectors, and other related apparatus in a jet engine or GAS turbine.

This paper addresses the performance analysis of a fuel cell-gas turbine hybrid system.

The exhaust from the cylinders spins the turbine , which works like a gas turbine engine.

Self-sustained oscillation will appear in gas turbine combustor when unstable combustion couples with acoustic.

The miniature gas turbine's technology comes from the technical aeronautics, rather comes from the automobile technology.

Platform friction damper is an effective measure to reduce the blade vibration in gas turbine.

Moreover, this paper also enumerated other problems in gas turbine when burning low heat value gas and proposed feasible solutions.

The Price Increase of the Fuel Oil and Countermeasures for the Gas Turbine Power Plants.

The results of simulation shows the simulation model can correctly reflect the running characteristic of gas turbine.

The gas turbine generating sets for co-production of power and heat is introduced as a focal point.

Making use of inlet air cooling system, the gas turbine output power can be increased in higher temperature ambient condition.

The utility model is suitable for the production of gas turbine blades with high temperature alloys.

A simulation model of a marine gas turbine is established by using a modeling method based on component characteristics.

INTERNAL COMBUSTION MACHINES. GAS TURBINE. ACCEPTANCE TESTS.

Four gas-turbine propulsion plants will power the ship to speeds above 30 knots.

One way is increasing the combustion initial temperature, and the other is reducing the gas turbine inlet air temperature.

ACOUSTICS. MEASUREMENT OF AIRBONE NOISE EMITTED BY GAS TURBINE INSTALLATIONS. SPECIFICATIONS AND SURVEY METHOD.

This method may provide a means for intelligent condition monitoring and fault diagnosis of gas turbine set.

The car gets its power from two new micro-sized gas turbine engines that are slightly larger and longer than a human forearm.

The SPC has the required accuracy, responsiveness, and redundancy required for steam or gas turbine fuel valve control.

A solving method on the mapping relation of fixed quantity between fault and sign in gas turbine set was proposed.

Firstly, with the flue gas turbine as the example, the importance of predictive maintenance is described.

So the fluid-thermal coupling CFD method will promote the design of non-adiabatic small gas turbine greatly.

Petroleum products - Determination of thermal oxidation stability of gas turbine fuels - JFTOT method.

The world's first steam locomotive is the locomotive, and after the power locomotives, diesel engine vehicles, gas turbine cars.

The motor-driven trains are recompression units, while the VECTRA 40G gas turbine -driven train will be used for export compression.

The processing platform also houses two massive 42MW gas turbine generators, which provide the power for all of the offshore units.

The process of blade root profile in gas turbine and revising calculation of profile of turning tool is discussed in detail in the paper.

The water injection device is designed for output increasing and NOX control in gas turbine .

Research on electricity generation by electro-thermal gas turbine combined cycle fueled by coke oven gas in Pingmei Group Corp.

The fuel cell and gas turbine hybrid power plant is a kind of effective, clean and environment-protecting energy--conversion equipment.

This paper summarized the methods of decreasing NOx emission from gas turbine .

In the past years, design of gas turbine combustor depends mainly on empirical formulae derived from experimental data.

This paper introduced the stator coil manufacturing technology of GE390H gas turbine generator.

A secondary nozzle is provided for a gas turbine.

A gas turbine is composed of the three major parts, among which each part completes one thermodynamic cycle.

The molten carbonate fuel cell(MCFC)-gas turbine hybrid system was analyzed.

The flue gas turbine- expander is the key equipment in catalytic cracking unit.

In addition, improper heat treatment process and welding defects promotes the destruction trend in the gas turbine wheel.

The gas turbine using a low caloric value gas, which is suitable for iron and steel plants, has both single and multi tube type burner.

This gas turbine is only about 30 per cent efficient.

This paper presented the development of a two-fuel injector group test rig for heavy-duty gas turbine with some experimental results.

As an approach to utilizing energy scientifically and supplying energy high efficiently, gas turbine is attracting more and more attention.

A component suitable for use in a gas turbine engine.

Studies a fuel system for use in a vehicle gas turbine.

The development prospect of on line monitoring and failure diagnostic system for flue gas turbine - expander was forecasted.

Its gas-turbine engines can work on civil airliners or fighter jets.

A thermal generating set driven by a gas turbine.

Covers every aspect of gas turbine design and operation.

Diesel engines are one form and gas turbine engines are another.

Mister Li is skilled at maintaining the gas turbine engine.

A worker rotates a gas turbine during assembly at the Siemens gas turbine factory on January 8, 2010 in Berlin, Germany.

The three-dimensional flow field of annular combustor for aero-derivative gas turbine burning gas fuel was numerically simulated.

The development history of aviation engine oil is briefly described, and the trend of future aviation gas turbine engine oil is predicted.

GE will provide four gas turbine modules per vessel.

A gas turbine engine assembly (8) includes a gas turbine engine (12) mounted on a three-point mounting frame (10).

a ship powered by a gas turbine.

The two MT30 gas-turbine alternators will be sited in sponsons high up on the starboard side of 4 Deck.

The gas turbine feeds on the fuel it pumps .

There are several possibilities being researched at present, such as electric, gas turbine, and "steam" engines.

So how did they create a gas turbine engine that is fuel efficient yet can go from zero to 62 mph in 3. 4 seconds ?

Exploratory Study of a Modification Scheme Incorporating Intercooling and Regeneration for a Simple-cycle Marine Gas turbine

This paper is to study the characteristics of micro gas turbine(MGT) when they use gasified biomass fuel.

The quenching process of gas turbine compressor disk was simulated to study the stress field by finite element method.

Simulation Study of a Combined Power Generation System Incorporating a Solid-oxide Fuel Cell and a Gas Turbine

A Closed Cycle Helium Gas Turbine Plant Used for a High-temperature Gas Cooled Reactor-based Electric Power Generation Unit

Numerical investigation on three-dimensional viscous flow of a variable-geometry power turbine for marine gas turbine

Numerical investigation on three-dimensional viscous flow of a variable-geometry power turbine for marine gas turbine

Numerical Simulation and Experimental Study of the Exhaust Gas Eductor of a Marine Gas Turbine

The Surface Failure and Protective Coatings Technology of Blades of Gas Turbine Engines

Efficiency Optimization of a Real Closed Intercooled Regenerated Gas Turbine Cycle

Thermodynamic Analysis of a Gas Turbine's Heat-Power Cogeneration System and Improvement of Its Energy Utilization

Thermodynamic Calculation Features in the Case of Saturated Steam Attemperation in a Gas-turbine Waste Heat Boiler

Selection Question of Gas Turbine in Combined Cycle Power Station

Numerical investigation on the throughflow characteristics of a variable - geometry power turbine for marine gas turbine

Study of design method for the zero-stage compressor in an expendable gas turbine engine

Interruption Cause of Water Supply for Condensate Pump in Gas- turbine Combined Circulating Power Station with Its Countermeasures

Heat Transfer Augmentation of the Cooling of the Flame-Protective Shell in the Low-NOx Combustion Chamber for a Gas Turbine Power Unit

Thermodynamics Index of a Wet Compression Process and Performance Analysis of Wet Compression-based Gas Turbine Cycle

Numerical study on annular combustor combustion flow of a gas turbine

Study of Measuring Technology of the Axial Fore of a Gas Turbine

Discussion on the intercooler used for chlorine gas turbine

Investigation of Vibration Characteristics of a Typical Aero- Derivative Gas Turbine

Calculation of the Blade-disc Coupled Vibration Characteristics of a Gas Turbine

Analysis and Solution of Dynamic Characteristic of a Centrifugal Compressor with Tail Gas Turbine

Thermodynamic Optimization of a Regenerative Gas Turbine Power Plant with Pressure Drop Irreversibilities

Development of Thermal Barrier Coating Used for Industrial Gas Turbine

Development of Thermal Barrier Coating Used for Industrial Gas Turbine

Multiple Objective Optimization Design for an Underwater Vehicle's Gas Turbine Propulsion System

Cost of electricity analysis of the hybrid power system combining wind farm with gas turbine

Noise criteria and sound measurement procedures of light weight gas turbine turnkey installations

Numerical simulation and process optimization of forging process of a gas turbine compressor blade

Study on frequency modulation starting and its features of Huizhou Natural Gas Turbine Combined-Cycle Power Plant

Analysis of and Countermeasures Taken for the Frosting of a Gas-turbine Air-inlet System

The state of development of inlet air cooling technology for gas turbine and its prospect analysis

An Analysis of the Vibration Characteristics of a Gas Turbine Bladed Disc

New technology of multiple element permeation and its application in wear-resistance of gas-turbine-blades

New technology of multiple element permeation and its application in wear-resistance of gas-turbine-blades

Numerical simulation of blade erosion in particle-laden gas turbine in two-way-coupling turbulent field

The Calculation of Windmilling Characteristics of a Gas Turbine Engine

Performance Analysis of a High-temperature Fuel Cell and Gas Turbine Hybrid Power Generation System

Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

The Assemble Welding Process Research of the Gas Turbine Combustion Chamber with Gas Compressor Cylinder Proper

The Temperature and Pressure Date Acquisition System of a IGCC Gas Turbine Test Rig for Combustion Chambers

Design and Fabrication of a Silicon-Based Micro Combustor for Micro Gas Turbine Engine

Requirements for combustion gas turbine driven cylindrical rotor synchronous generators

Numerical Simulation of Three-Dimensional Combustion Flow in a Gas Turbine Annular Combustor

Numerical Simulation of Three-Dimensional Combustion Flow in a Gas Turbine Annular Combustor

Design Improvement of Bleed Valve and Pipe for a Heavy Duty Gas Turbine

Numerical Simulation of Full Three-Dimensional Viscous Flow Field in a Multi-Stage Transonic Gas Turbine

then a system analysis, design and simulation are done for a gas-turbine combined cycle power plant system according to the design steps;

Safety Analysis Method and its Application to Gas Turbine High-temperature Gas Cooled Reactor

Methods of test for petroleum and its products - Determination of thermal oxidation stability of gas turbine fuels - JFTOT method

Design Refinement and Numerical Simulation of a Gas Turbine Starter

Dynamic Process Analysis of a Recuperative Micro Gas-turbine System

Research on Increasing the Gas Turbine Generating Capacity by Intake Air Cooling Using a Lithium Bromide-Water Absorption System

Analysis on vibration of Flue Gas Turbine by condition monitoring system and its improvement

An Improved Gas Turbine with Generality Carnot Cycle and Its Performance Prediction

Investigation on adjusting frequency and relieving vibration of a gas turbine by flexible support and PSFD

Investigation and Remedies Concerning Failures of? Brass Tube of Steam Turbine Condensers in the Huaneng Shantou Gas Turbine Power Plant

Application of the Combined Cycle Power Plant Technology of Gas Turbine Using Low Caloric Value Gas in Iron and Steel Plants

A Brief Talk on the Application of Gas Turbine for the Regulation of Energy Industry Structure

Application of multi-fluids model to three-dimensions reacting flows in a model gas turbine combustor

The cause and preventing measures of exhausted gas turbine supercharger injury

Numerical Simulation and Technical Optimization of Gas Turbine Compressor Disk Quenching Process

Dynamic Behavior of a Inter-Cooled Gas Turbine Set with Waste Heat Recuperator

Simulations research of the global predictive control with self-adaptive in the gas turbine of the nuclear power plant

Combined Cooling-Heating-Power Generation Gas Turbine Systems and Their Thermodynamic Analyses

Solving the Defects of Shrinkage Cavity and Porosity by Proportional Solidification Theory on Gas Turbine Shell Castings

The plan for building a Website to transmit technical information of gas turbine and its practice

Numerical analysis of inside flow of radial micro-gas turbine impellers

First Chinese Instance Base for CAD System of Investment Casting Mould Used in Gas Turbine Blade Manufacture

Optimal Design and Operation of a Gas Turbine CHP Cogeneration System

The aero gas turbine is being continually developed to provide improved performance for each new generation of aircraft;

A numerical analysis of three-dimensional viscous flow through the power turbine for marine gas turbine

General specification for lightweight gas turbine electrical equipment

The Study of an El astic-plastic Constitutive Model and Its Application on a Gas Turbine Impeller

The Study of an El astic-plastic Constitutive Model and Its Application on a Gas Turbine Impeller

Analysis of electric power generation characteristics for hybrid power system combining wind farm with gas turbine

Developing undergraduate gas turbine and turbomachinery courses

The Air Pretreatment Device of Setting the Gas Turbine in Tahe Oilfield Electric station

This paper studied on the factor about fatigue life of flue gas turbine blades;

Study of general analysis technology of heat passage in large gas turbine

Computer Simulation of Quenching Stress Field during Gas Turbine Compressor Disk Quenching Process

Structure Reliability Evaluation of a Gas Turbine Disk

Experimental Investigation of Gas Turbine Compressor Interstage Water Spray

Cycle Analysis of Gas Turbine with Water Injection into Inter-Stage of its Compressor

Cycle Analysis of Gas Turbine with Water Injection into Inter-Stage of its Compressor

Gas turbine information to be supplied by user and manufacturer

Discussion about gas turbine used as a peak load regulation unit in Heilongjiang power grid

The digital excitation control system used in gas turbine generator

Retrofit for Output- increase of a Large Gas Turbine Combined Cycle's Waste Heat Boiler

The Analysis for the Abnormal Vibration of a Gas Turbine Unit

A Mathematical Model for the Wet Compression Process in a Gas Turbine Power Plant

The Flow Field Structure of the Power-turbine Variable-area Nozzle Stage of a Marine Gas Turbine

Temperature-field and Stress Analysis of a Gas Turbine Rear Casing

Finite Element Computation for Accident Failure Analysis of Inlet Heating Pipe Expansion Joint of Flue Gas Turbine for CCU

Finite Element Computation for Accident Failure Analysis of Inlet Heating Pipe Expansion Joint of Flue Gas Turbine for CCU

Three-Dimensional Numerical Simulation of the Flow and Combustion of the Gas-Turbine Chamber

Development and Prospect of Gas Turbine Generation Technology both in Domestic and International

Local Heat Transfer Characteristics in "Impingement-Film" Cooling Style About Inner Side of Gas Turbine Blade

Modeling a Simple Cycle Gas Turbine System and Analyzing Its Off-Design Performance

Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 4: Gas turbine sets

Analysis of the Vibration Causes of a Flue Gas Turbine

Characteristics and Application of Gas Turbine Distributed Energy Supply System

ASME International Gas Turbine & Aeroengine Technical Congress ASME

Gas turbine power generation technology aimed for sustainable development

Thermophysical Property of Working Fluid of High Temperature Gas-cooled Reactor Helium Gas Turbine Cycle

The Worthwhile Proposed Gas Turbine Compressor Unit for the Gas Pipeline Engineering

Adopting Inlet Air Cooling Technology to Raise Output and Heat Rate of Gas Turbine Power Plant

The Two-Phase Flow Analysis and Geometry Optimization of the Gas Turbine Combustor

Blade-Tip Clearance Analysis of a Gas Turbine Compressor

A Super-low heating-value-fuel-fired Gas Turbine and Its Thermodynamic Analysis

Numerical Analysis and Experiment Investigation of Blade Erosion in Particle-Laden Gas Turbine

Technical specification for construction of FCCU axial flow compressor-flue gas turbine trains

Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

Numerical Simulation Studies on the Discharge Coefficient of Gas Turbine Combustor Liner Air Holes

Recent Development and Prospects for the Distributed Simulation of Gas Turbine

Adjustment Strategy and Performance Analysis of Gas Turbine System When Burning Medium and Low Heat Value Fuel

Features of the Axial Exhaust Condenser in Siemens Gas-turbine Combined Cycle Power Unit

The Optimization Design for the Underwater Vehicle's Gas Turbine Propulsion System

An Experimental Investigation of New-type Fuel Application in Gas Turbine Engine

General Laws Governing Wet Compression Process in a Gas Turbine Plant and the Process Performance

Study on Electron-Beam Welding Deformation for Stationary Blade Carrier of Gas Turbine Compressor

Experimental study on knockdown adsorption air conditioning using waste heat of micro-gas turbine

Average continuous running time of gas turbine

Current State-of-art for Repair of Monocrystalline Blade in Gas Turbine

Numerical simulation of effects of heat transfer on the transient performance of gas turbine engines

Conceptual and Methodological Study on Sensor Data Validation in Gas Turbine Engine Ground Tests

Three dimensional nonlinear cyclic stress-strain analysis of gas turbine rotor disk-blade system

Numerical Study of Cold Flow Field in Gas Turbine Combustor

Calculation Formulas for Reliability Indexes of Gas Turbine Generating Units

An Approach to the Technical Transformation of Existing Thermal Power Plants by Using Gas Turbine Generator Unit

Numerical Simulation of the Flow Field of a Naval Gas Turbine Exhaust Volute

Analysis of Thermal Stress and Life Loss for Peak Load Regulating Gas Turbine Combined Cycle's Steam Turbine Rotor

An Exploration into Green Discoloring Technique by Using Gas - Turbine Green Discoloring Cylinder

Dynamic behavior of marine intercooled regenerated gas turbine engines

Preliminary Study on Thermal Features for High Temperature Gas-cooled Reactor Gas Turbine Cycle

Twice-combustion Technique Enhance Gas Turbine Proficiency

Modal Analysis of Radial Inflow Impeller of a Gas Turbine

Realization and Design of a Gas Turbine Simulator

A Study of Particulate Measurements in Gas Turbine

Effect of gas turbine body aligning to its operation

Life Prediction Considering Creep and Stress Relaxation for Gas Turbine Engine Hot Section

Developing Progress and Prospect of Power Generating of Gas Turbine at Home and Abroad

Numerical simulation of three-dimension reacting flows in model gas turbine combustor

Technical Performance and Cost-effectiveness of Gas Turbine Inlet Air Cooling Systems

Finite Time Thermodynamic Analyses for Gas Turbine Cycle: Theory and Application

General requirements for light weight gas turbine auxiliary equipment

Assembling technical specifications for gas turbine

Research of Smart Electronic Interface Unit of Distributed Control System for Gas Turbine

Discussion of configuration on natural gas pressure reducing station in gas turbine plant

Analysis and Discussion on Primary Frequency Regulation of Gas Turbine and Combined Cycle

Experimental Study of Gas Turbine Nozzle

Summary of Methanol Fueled Gas Turbine Technology and Research Development

Thermodynamic Analysis of Coal- gasified Steam- injected Gas Turbine Cycle

Flow simulation and geometry optimization of gas turbine combustion camber

Maintenance and Trouble Shooting Measures for Typical Servo Mechanism of Gas Turbine

Numerical Calculation of the Three-dimensional Turbulent Flow Field of a Gas Turbine Combustor

Study on the parameter estimation method of the non -linear gas turbine performance

Discussion again the factors affecting reliability of gas turbine power station

Research on reasonable collocation of triple-generation system with gas-turbine

Technical Economical Comparison of Inlet Air Cooling Technology for Gas-turbine

The Application of Support Vector Machines to Gas Turbine Performance Diagnosis

Present Status of the Research and Development of Wet Compression Technology for Gas Turbine Power Plants

Influence of Gas Turbine Performance on the Profitability of Combined Cycle Power Plants

Development and Localization of the Heavy Duty Gas Turbine Industry