failure mode

This method thought over synthetically the factors of invalid rate and failure mode of every element in the system.

Failure mode is bending failure along the surface occurred by bond-type damage, take the place of shear failure.

Uniqueness of tokens also results in an additional failure mode when attempting to connect a slot using a token that has already been used.

That did not happen They failed to do a full Failure Mode Effects Analysis (FMEA).

Analysis module for the system and the consequences of its failure mode analysis, as the expansion of the fault tree model.

The research on the bearing capability and failure mode of the gravel pile has been a hotspot in the field of geotechnical engineering.

However, when decreases to a certain value, it has little influence on rock deformation and failure mode.

Combined with a typical plate girder type of landslide deformation and failure mode, respectively targeted treatment program works.

In our use case, one common failure mode was that build interruptions could result in faked still running.

The finite element method was adopted for structural analysis, and the safe margin equation was set up for a failure mode.

For GUI programs, the hardest part can be recognizing whether the application indicated the right failure mode.

That failure mode can be difficult to diagnose, and the error may be located far from the test failure.

Fault Tree Analysis, Failure Mode and Effect Analysis and Hazard and Operability Analysis are used to complete the inherent risk evaluation.

Combined with seismic damage of frame in Wenchuan Earthquake, failure mode of the infilled walls have been analyzed.

Failure mode, effect and criticality analysis (FMECA) is an effective technique to improve the reliability of products.

The experimental method, behavior within the whole loading period and failure mode of the joint were described.

The experimental results show that the increasing of low-frequency noise and the voltage peak - peak random is the main failure mode.

We study the failure mode of the load-bearing joint of a 3D braided composite lug through experiments on static tension.

Under just one loads of internal pressure, this article studies the expanding law of plastic zones and the final failure mode.

At the same time, modules of the system failure mode and effect analysis, FMEA report form, which as a Fault Tree added and improved.

This article brings forward an algorithm which combines the stratification algorithm with the FMEA (Failure Mode and Effect Analysis).

In the era of Cu process, optimization of the acceleration factor is the key to present the failure mode under accelerated life time test.

Generally , only the plastic failure mode is considered in system reliability analysis of structures.

Fastener common failure mode of failure of the assembly has elongated, fatigue fracture and delayed fracture.

Identify failure detection methods. Identify compensating provisions for each failure mode.

he failure mode of the composite staggered truss structure belonged to beam(truss) plastic hinge mechanism.

Push the responsible department to do preventive and corrective action re the potential failure mode.

Knowledge on component failure analysis. Working experience on failure mode analysis will be a plus.

Taking the aluminum section extrusion die as the object of study, carries on the failure mode analysis.

The failure mode changes into fragile failure from plastic failure gradually with the increasing of cement ratio.

One bracket in a particularly critical place, a single point failure mode, that bracket was under-designed.

The failure mode and lifetime distribution of the devices are found out so as to provide a basis for research further their reliability.

The change of sandwich beam design parameters will cause corresponding change in failure mode.

The failure mode of worn materials is characterized by plastic deformation if the counter of particles is round in shape.

The fault diagnosis and optimal adjustment module was established using failure mode and adjustment model.

Due to proper confinement, the failure mode for most of the specimens was pullout mode.

As a paper on the reliability of fiber optic cables points out, "the highest failure mode is 'backhoe blackout. "

The output of an FMECA is a relative risk "score" for each failure mode, which is used to rank the modes on a relative risk basis.

The failure mode of the pipe with small diameter is much different from the pipe with large diameter.

This paper analyzes the failure mode caused by the polluted hydraulic system and harmfulness for construction machinery.

The skins delamination is the main fatigue failure mode for composite blades.

The durability, strength, and failure mode of rib fracture fixation with intramedullary rib splints were evaluated in 27 cadaveric ribs.

Provide a clearer explanation of the steps to develop a robust Failure Mode Analysis.

Wear is the main failure mode of shaft components in construction machinery.

The ultimate anchorage strength of the bars under mixed bond-cone failure mode is analyzed. Comparison with test results is made.

The main failure mode of the automobile engine cylinder is wear.

Researchers have discovered that the brain slips into periods of "power failure" mode in people who are sleep-deprived.

Debonding at CFRP plate and adhesive interface is a common failure mode for NSM CFRP plate to concrete.

Namely, when the damping is small, the influence will be great. The results also show the buckling failure is the primary failure mode.

Developing and auditing Design Failure Mode and Effect Analysis (DFMEA).

The main failure mode and discretion index for aged platform is analyzed.

Some main process failure mode e. g. lack material of CD340 water board prevent board, weak jointing, cloth dilapidation were not analyzed.

Knowledge of dyno tests, failure mode analysis, internal combustion engines with focus on diesel, fuels and lubricants.

On the basis of log-spiral failure mode and two-broken line failure mode, a two-broken line modified failure mode was set up.

Heavy traffic has a significantly destructive action to pavement, and it often causes an early and complex damage failure mode.

The main device failure mode is secondary breakdown.

And then the failure mode of Ahai house-dam and effect of aseismic reinforced concrete for water retaining dam section were studied. 4.

and the failure mode also changes from shear failure to compression failure.

Tear down products with engineers and analysis the failure mode.

A failure mode of pyriform hole and the concepts of slip and spring back were put forward.

One side of the pier shows horizontal circular cracks because of tension. This belongs to flexural failure mode.

In this paper the failure mode and failure mechanism due 1o friction and wear in instrumentation are dealt with thecretically.

Failure Mode: How does the issue manifest itself?

Shear failure is a basic failure mode of borehole rock.

According as above failure mode, a series of numerical analysis is accomplished based on finite element program ANSYS.

In addition, the failure mode switched from flexural failure to shear failure.

an overall buckling failure mode.

An introduction To Failure Mode and Effects Analysis.

Failure mode of M2 steel mandrel roller is mainly fatigue fracture.

Is there a systematic approach such as FMEA (Failure Mode Effect Analysis) to define those parameters and ranges?

Failure mode open, closed, as is? .

The pieces are designed according to typical failure mode.

Job responsibilities: 1. Perform safety test, function test, durability test, failure mode test of various kinds of petrol tools.

What is the Problem? Describe the failure mode.

Failure mode of tooth surface is varied such as teeth surface pitting, teeth wear, teeth bonding and teeth plastic deformations and so on.

the failure mode tends to rationality, the phenomenon of brittle fracture removes;

Failure Mode Analysis and Strengthening on the Beams and Slabs of an Old Brick-Concrete Building

Application of a web-based identification system for corrosion failure mode and causes

Research on the Electrochemical Performance and Failure Mode of a VRLA Battery

Operation Theory and Failure Mode Analysis for a Flight Data Recorder Interface Board

Failure Mode of Deep Large Section Intersecting Laneway and Its Countermeasures

Displacement- based Failure Mode Dependency Analysis of RC High- rise Frame Structures under Strong Earthquakes

New dam safety evaluation tool: Enhanced inspection and monitoring through potential failure mode analysis

Failure Mode and Stability Analysis of Rock Deformation in Slope at Dam Crest Level at Left Bank of Zipingpu Water Conservancy Project

Research on the Broad Sense Model of Single Failure Mode Bivariate Function Complex System Fuzzy Random Reliability

The Scene Analysis And The Countermeasures Of The Failure Mode For Large-Scale Marine DC Motor

Failure Mode Effect and Criticality Analysis for Condition Maintenance of Power Transformer

Study on Deformation and Failure Mode of Stratified Rock High Slope with Complicated Structure in Zipingpu Project

failure mode and effects analysis FMEA ; usability ; usability evaluation

Failure Mode and Its Countermeasure for Miniature Bearing

Failure Mode and Its Countermeasure for Miniature Bearing

Simplified Simulation and Failure Criterion of Failure Mode Analysis for Space Parking System

Failure Mode Effect and Criticality Analysis to the Magnetic System of Permanent Magnetic Bearing in Rotating Machine

Identification of Failure Mode of Rolling Bearing Based Waveform Distribution

Failure mode of RC flexural or shear structures strengthened with Carbon Fiber Reinforced Polymer

Statistical Process Control Failure Mode Effective Analysis

Ice load acting on conical structures during the transition of ice bending failure mode

failure mode effect analysis failure model effectiveness analysis

Failure Mode Analysis and Diagnostics Techniques for Missile Test Equipment

Analysis of failure element drift in structural failure mode identification

Analysis of failure element drift in structural failure mode identification

Using artificial intelligence for prediction of failure mode of pressure vessels

Successful Mode and Failure Mode Analysis for Computer Networks With Imperfect Nodes

Comparison of the failure mode of various types of glass ionomer cements

Analyzing the Failure Mode Effect of Computer-Based Interlocking and Controlling System

Failure mode and strength design method for concrete beams with rectangular opening

Failure Mode and Reliability Analysis for Non-symmetry Corrosion Bridge Pier and Column

For consequent slope, when dip angle of structure plane is small, the mainly failure mode is slippage;

Effect of the Thickness of Carbon Fiber Laminate on the Failure Mode of Strengthened RC Beam

Study on failure mode of stiffened plate and optimized design of structure subjected to blast load

A Study on Failure Mode and Reliability of Liquid Aluminum Electrolytic Capacitor

Potential Failure Mode and Effects Analysis in the Technological Process

Analysis on Piston Failure Mode from Engine Abnormality Combustion

Failure Mode of High Speed Rolling Bearing under Unstable Running Conditions

Failure Mode Analysis and Optimal Design of Compression Sandwich Panels

Deformation Failure Mode and Evaluation of Stability for the Yiyuanchong Landslide in Wuzhou

A study on hole size effects and failure mode of brittle materials containing multiple holes

Study on the blast load and failure mode of ship structure subject to internal explosion

Failure Mode of Load-bearing Joints in Three-dimensional Braided Composites

Common Failure Mode and Countermeasure for Cold Upsetting Rollers

Failure mode - the manner in which a component or system failure occurs (doesn't meet design intent)

Experience with process failure mode effects analysis

Failure mode and mechanism analysis of refractory fibre for marine boiler

Application of failure mode effects analysis in design of injection mould

Failure mode effect and criticality analysis on certain serial CNC lathes

A Key Failure Mode Resulting in Interfacial Fracture of Soldered ENIG Surface

Human Error Failure Mode, Its Effects and Criticality Analysis

Expert system in identifying failure mode of hanging wall of room-and-pillar mining

Failure Mode and Method of Extending Life for the Rolling Bearing in Gas Turbine

List conceivable potential causes of failure for each failure mode

checkup of v - shape driving belt and its failure mode

Research on concrete's failure mode and prevention in Ningxia pickled area

Reliability Design of Gun Brake Spring With Variety of Failure Mode

Failure Mode of Staggered Truss System of Steel Structure Under Severe Earthquake

Study on Two-Broken Line Modified Failure Mode of Soil-Nailing Wall Structure

Failure mode and stability analysis of soil slope on inclined bedrock

Study on Failure Mode of Short-pier Shear Wall Structure under Earthquake

Failure Mode and Effects Analysis for Induced Fans of Thermal Power Plant

Failure Mode and Cause Analysis of Vacuum Electronic Devices

FMECA: Failure mode effect and critically analysis

Failure mode and cause analysis of CNC bearing grinding machines

List the effects, causes, and current controls for each failure mode

Large scale distribution system reliability evaluation based on failure mode and effect analysis

The Analysis of the Failure Mode of the Aero-engine Axletree

Failure mode and cause of refractory fiber material of marine boiler

An Analysis on Failure Mode Induced by Educts from Ceramic IC Packages

Analysis of Failure Mode for Shallow Slide in Fault Influence Zone

DFMEA Design Failure Mode Effects Analysis

Experimental Study on Failure Mode of Rock-Embedded Pile

Failure Mode and Solution for Turning Coating Tools

Failure Mode Analysis for RC Slab under Explosive Loads

The experimental results show that: (1) the failure mode is sliding and fracturing;

Research on failure mode and diagnostic method of gas sensor

A new method for optimizing distribution maintenance based on failure mode and effect analysis

Failure Mode Analysis for Processing Tower in Use

Calculation of Safety and Spurious Trip of Safety Instrumented System Based on Failure Mode

Analyse of the Failure Mode of Solder Joint

A Failure Mode of Micro Mechanical Shock Sensors

Failure Mode Of Centre Cone For Radial Spiral Burner

Design Failure Mode and Effect Analysis

FMEA: Failure Mode and Effect analysis

One failure mode of dual-shell U-tube heat exchanger

Failure Mode and Cause Analysis of CNC Lathe

Analysis on Failure Mode for Piston Ring

Following conclusions are drawn from this study: (1) the failure mode of all specimens is typical brittle failure;

Research on the Inspection Polices of 2-Failure-Mode Systems

Research on high sideslope failure mode of Badong new county town in the Three Gorges reservoir area

On the failure mode of VRLA batteries

Diagnosis approach based on failure mode importance of causality diagram

V. passenger Failure Mode and verify the simulation again, quickly find out really bad because of, and the first time to pay back ;