EPDM

Made of white EPDM rubber and cork, this soft tub was designed to be a simple option for outdoor fun, healing or washing up.

Both upper sealing rings in the lower liner seal are similar and made of Ethylene Propylene Diene Monomer rubber (EPDM).

Improved tensile strength and elongation of ethylene propylene diene monomer (EPDM) compounds used for wire and cable.

Dry sealing is achieved by means of pressure balancing principle as it adopts double EPDM rubber sealing strip.

The processability of uncured EPDM would be improved by decreasing process frequency, increasing strain or temperature.

Heat of the main construction material sealant mainly isobutene polymer, EPDM rubber and thermoplastic styrene block copolymer.

The blends with a morphology of continuous phase of NBR and dispersion phase of EPDM had good ozone resistance and oil resistance.

A very wide option of patented designed EPDM gaskets, not alterable under any different climatic condition, completes the ALUK System.

Liquid EPDM is the ethylene-propylene-diene polymer with relatively low molecular weigh, so it has low viscosity.

The vulcanization behavior of EPDM sulfur curing systems was studied through the application of orthogonal testing method.

The extrusion pressure was lower than that of pure EPDM, and its decreasing range was larger with increasing mass fraction of PPA.

The model is used to simulate data of stress relaxation coefficient of EPDM in oven during accelerated aging with the changing of the time.

Secondary seal material shall be FPM or EPDM and correspond to the seat material for maximum chemical resistance.

EPDM has good abrasion and tear resistance and offers excellent chemical resistance to a variety of acids and alkalines.

EPDM or PTFE diaphragm selection affords wide range of applications, from corrosives to slurries and high-purity.

Do not install EPDM liner in compressed air lines.

Furthermore, the stress-strain curves and stress relaxation behavior of EPDM vulcanizates was also studied.

The course of development of EPDM composite coloured shingle is described with focus on its main materials and self-stick layer.

EPDM rubber seal in automotive products has become the principal material, its development and application of both.

And EPDM (EPDM) is already in the car seal industry in a wide range of applications.

The application of orthogonal experiment to the EPDM formulation is described.

Three EPDM belongs to non crystalline rubber reinforcing agent, if not, then the mechanical properties of vulcanizates low, of no use value.

Three options for resilient seat materials (EPDM, NBR and FKM) and two packing options are available.

With the addition of EPDM and MMT, the notched impact toughness of PET was greatly improved.

The tensile strength and Shore A hardness decreased with EPDM amount increasing.

The effect on the toughening of polypropylene(PP) by styrene-ethyl ene propylene diblock copolymer(SEP) as well as EPDM was studied.

The optimum properties of the set EPDM rubber insulation are as follows: density 1.

Compared with diolefine rubber, EPDM has less double bond.

EPDM has many kinds of production processes, each process has its unique properties and characteristics.

In order to improve the sulfuration speed of EPDM sizing material, mass accelerants are required to add.

Industry: EPDM; Rubber; Daily life of rubber products; Plastic Building Materials; Other synthetic rubber;

Development of resistance to high-temperature EPDM compounded rubber stock used for cars

the coupling agent A-172 had a more significant modifying effect and gave EPDM vulcanizate much higher tear strength;

Mechanical properties and dispersion morphology of radiation-vulcanized EPDM filled with nano-filler

Study of Development and Application of EPDM Rubber Tubes for Intercooler

The Changes of Status of Brominated Phenolic Resin in EPDM during Curing and its Effects on the Properties

Industry: EPDM; Other synthetic rubber; Industrial Rubber Products; Other rubber products;

Test Methods for Rubber - Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures with Oil

Industry: Silicone rubber; NBR; Viton; Polyurethane Rubber; EPDM; Other synthetic rubber;

Industry: Oil seal; Rubber molding; Gasket; Silicone rubber; Industrial Rubber Products; EPDM;

Industry: Neoprene; Other natural rubber; Other synthetic rubber; Standard rubber; NBR; EPDM;

The Comparison Between Imported EPDM and Domestic EPDM to Produce Waterproof Rolling Material

EPDM waterproof system and its application to lightweight steel roof

Influence of modified superfine bentonite on properties of halogen-free flame-retardant EPDM compound

Industry: Other synthetic rubber; Silicone rubber; Butyl Rubber; NBR; Neoprene; EPDM;

The preparation of EPDM rubber insulation with anti-ablative performance in the system of Br-Sb

Comparison of metallocene polyethylene elastomer and EPDM in toughening modification of PP

Research Progress in Influence Factors of Ablation Resistance for EPDM Insulation Material

Minimum Requirements for Fabric-Reinforced Black EPDM Rubber Sheets for Use in Roofing Applications

Formulation of EPDM insulation compound for high temperature resistant oil-immersed cable

Minimum Requirements for Fabric-Reinforced Non-Black EPDM Rubber Sheets for Use in Roofing Applications

Application of multi-target optimization method to EPDM formulation experiment

Industry: NBR; SBR; EPDM; Silicone rubber; Butyl Rubber; Other Plastics Processing;

Application of EPDM waterproofing system in TVCC curtain wall waterproofing project

Industry: Smoke plastic; Emulsion; Other natural rubber; SBR; Neoprene; EPDM;

High bonding strength splice adhesive for seaming EPDM waterproofing membrane

Minimum Requirements for Non-Reinforced Non-Black EPDM Rubber Sheets for Use in Roofing Applications

Industry: EPDM; NBR; Butyl Rubber; Silicone rubber; Viton; Other natural rubber;

In this paper, with dynamic rheometer and capillary rheometer, effect of EPDM and cross-linking on the PP melt were studied;

Mechanical properties and crosslinking density of GMA reinforced EPDM

Application of orthogonal experiment to EPDM formulation;

Discussion on Extruded Technology of High Temperature Core Wire with EPDM Insulation

Preparation of EPDM Rubber Insulation with Ablative Performance and Low Density

Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

Modification in-situ of EPDM filled with carbon black by unsaturated hydroxyl fatty acid

Industry: Smoke plastic; Standard rubber; SBR; BR; EPDM; Other natural rubber;

Applications of EPDM waterproofing membranes in basement works

Effect of different EPDM contents on mechanical properties of the blend system

Effects of the test conditions on the ablation property of EPDM insulation

Application of uniform design method to EPDM formulation experiment

The effects of filler fiber and flame retardant on ablative performance of EPDM insulation

Mechanical properties and crosslink density of zinc dimethacrylate reinforced EPDM

Continuous Curing Production Line for Extruding EPDM Water-Proof sheet

Application of flexible halogen-free phosphorus EPDM insulation to SRM

Synergistic toughening effect of nano calcium carbonate and EPDM-g-MAH on polypropylene

Effect of formulation and processing technology on properties of moulded EPDM foam

Application of MATLAB Artificial Neural Network in Forecast of EPDM Vulcanizates'Properties

Discussion on Match of Vulcanizing Speed and Foaming Speed in EPDM Foaming Process

Advances in EPDM modification by graft polymerization

Studies on the Synthesis of PBM and Its Application in EPDM

Application of EPDM sheet in water stopping of expansion joints of aqueducts

Effect of ATH Composite Flame Retardants on Properties of EPDM Vulcanizate

Application of chlorinated carbon black to EPDM compound

Study on Properties of Halogenless and Flame Retardant EPDM Blends with Regression Analysis

Effect of Brominated Phenolic Resin on Cure Characteristics of EPDM

Effect of Plasticizer on Properties of EPDM Insulator Material

Match of vulcanization rate and foaming rate in EPDM foaming process

Properties of PA6 toughened with EPDM-g-MAH and study on its impact fracture surface

Determination of crosslinking density and structure of cured EPDM by calibration curve

Application of EPDM to piston seal in automobile brake system

Main points on quality management in production of EPDM sheet

EPDM shield rubber compound for medium voltage cable

O. EPDM & SPORTS ACRYLIC SURFACING SYSTEMS

Application of domestic EPDM to inner tube compound

Development on the Low Smoke Material Based EPDM Rubber

The Application of EPDM in Complex Rubber Sealing Strip

Study on Glittering of EPDM Articles and Mold Pollution

Influence of curing system on heat aging properties of EPDM

Study on Application of Sepiolite in Formula of EPDM Rubber

EPDM on modification of general purpose resins

Influence of vulcanization sulfur on EPDM

EPDM, a clever choice among roofing solutions

Advances on synthetic technology of EPDM

Influence of curing agent on properties of EPDM for cable

Preparation of EPDM rubber adhesive

Development of EPDM composite coloured shingle

Application of waste tire crumb to EPDM compound

Detail treatment of EPDM roofing system

On the Effect of Type and Dosage of EPDM on the Crystal Behavior of Polypropylene

Development of heat resistant EPDM seal with inner skeleton

Application of EPDM in sidewall of bias truck tire

Effect of formulation on properties of EPDM foam

Effect of Isocyanates on Adhesion of EPDM Rubber

Development of EPDM compound for high speed extrusion

Development of halogen free flame-retardant EPDM

Development of hot and oil resistant EPDM cable compound

Blending modification of PP by EPDM

Self adhesive tape for lap seam of EPDM sheet

The study and application of EPDM coat and pad formulation using railway whole road bed