exchange server

Correct permissions may not have been replicated to the domain controller that this Exchange server is trying to connect to.

When installing Exchange Server into a Windows server cluster, Exchange must be installed in the same directory location on all nodes.

If you do not know what version of Exchange Server your e-mail account is using, contact your Exchange Server administrator.

For more information about this configuration, see Using a Dual-Homed Exchange Server as an Internet Gateway.

Your Exchange Server must be configured to contact a DNS server or to resolve DNS names.

Earlier versions of Microsoft Exchange Server did not rely heavily on property sets for applying permissions in the domain partition.

If you do not know what version of Exchange server your e-mail account is using, contact your Exchange administrator.

Exchange has detected that the specified file is not the correct version required to run Exchange System Manager or Exchange Server.

Without Office Outlook 2007, you might have to manually reconfigure users'Outlook profiles to point to the new Exchange server.

NOTE: It is recommended that this tool is installed and executed on a workstation rather than an Exchange server.

In pre-release versions of Microsoft Exchange Server 2007, the Edge Transport server role was referred to as the Gateway server role.

You can use Routing Group connectors to connect two or more Exchange Server routing groups.

This guide provides overall operational information to help optimize the performance of Exchange Server Intelligent Message Filter.

The purpose of the Exchange Server Best Practices Analyzer is to encode all this knowledge into a single application.

You establish mail flow between an Exchange 2007 transport server and an earlier version of Exchange Server or any other SMTP server.

This Error event indicates that the Referral Interface on the Microsoft Exchange server was unable to contact a global catalog server.

Performance Troubleshooter helps you to locate and identify performance-related issues that could affect an Exchange server.

If you are still not able to restore synchronization, the Microsoft Exchange Server service support files may be damaged.

Computers that have agents will be included automatically in the following groups according to which Exchange Server roles are installed.

Mailbox servers, the heart of Exchange Server, are where user mailboxes and public folders are stored.

You can only specify this parameter when you are running this cmdlet on an Exchange Server That Has the Client Access server role installed.

That is, any Exchange server can send mail directly to any other Exchange server in the organization.

This topic is intended to help you better understand replication storage technology, and how it is used in an Exchange Server environment.

This method works only with a Microsoft Exchange client connected to a Microsoft Exchange server.

With a synchronous replication solution, the number of mailboxes that can be hosted per Exchange server is reduced.

In the console tree, expand Microsoft Exchange Server, expand the server that you want, and then expand Microsoft Information Store.

Formerly known as JET, ESE is a method that defines a low-level API to the underlying database structures in Exchange Server.

Both Outlook and Exchange Server use the OAB sequence number to determine the OAB files to be downloaded to Outlook.

As shown in the following figure, the inter-organizational replication process involves one Exchange server in each forest.

However, either database could be transferred to a third Exchange server, and could host that server's system attendant mailbox.

Compare the settings on the server on which the Error event occurred with those on an Exchange server that is not experiencing this error.

This property contains the name of the Exchange server on which to expand the distribution group or dynamic distribution group.

Later topics provide metrics and tuning tips to help you reach optimum performance from your Exchange server.

We recommend that you configure this Send connector to use Basic authentication plus TLS to authenticate to the legacy Exchange server.

If you configure a single database server, your disk design is similar to that of Exchange Server 5. 5 And Exchange 2000 Server.

Microsoft Press Microsoft Press offers the training and support materials you need to help you get more from Microsoft Exchange Server.

The file name extensions listed for ForeFront Security for Exchange Server are the signature files from various antivirus directory engines.

Selecting the Attachments section will prompt you to setup an Exchange Server or Gmail account.

In this topology, Exchange Server is not installed on a directory server, and it may be installed on multiple member servers.

Therefore, each Exchange server's threshold actions must be maintained separately as two independent settings.

Use the Active Directory Service Interfaces (ADSI) Edit tool to move the Postmaster mailbox to a different Exchange server.

Exchange server's details and addresses templates must be maintained separately as two independent settings.

The property configuration of a Microsoft Exchange Server 2007 transport server determines how that server processes messages.

The SMTP protocol for sending notifications to Microsoft Exchange Server or other SMTP servers.

Instead, back up your Exchange server's database and transaction log files as part of a separate backup.

Use the Dismount-Database cmdlet to dismount a database in a storage group on an Microsoft Exchange Server 2007 mailbox server.

Therefore, requests for public folder data are directed over the remote connection to an Exchange server in the data center.

Resources can be added to projects from Microsoft Active Directory or from a Microsoft Exchange Server address book.

This topic provides links to help you locate security-related documentation for Microsoft Exchange Server 2007.

Information in a user's mailbox is stored in a mailbox store database on an Exchange server.

Occasionally, organizations that use Microsoft Exchange Server must integrate e-mail, directory, and calendar information with Lotus Notes.

If you do not keep a record of this information, you might not be able to recover your Exchange server clusters.

It enables Microsoft Outlook clients to look up address book requests without having to connect to an Exchange server.

You must exclude specific directories for each Exchange server or server role on which you run a file-level antivirus scanner.

This Warning event is logged when the Microsoft Exchange System Attendant generates new security keys on an Exchange server.

MAPIProxy is designed like a typical proxy process to relay messages from a MAPI-compatible client to an Exchange server and back.

The tools are part of the Microsoft Exchange Server Performance Troubleshooting Analyzer Tool (ExTRA).

Use the Set-ExchangeServer command to set Microsoft Exchange Server 2007 attributes in Active Directory for a specified server.

This permission allows Exchange servers that are running earlier versions of Exchange Server to submit messages from internal senders.

Exchange Server Deployment Tools are tools and documentation that lead you through the entire installation or upgrade process.

It is an Exchange Server security best practice to not enable network DTC access for an Exchange cluster.

To use an Exchange server for e-mail delivery, you must specify the name of the SMTP gateway that is configured for your Exchange server.

Generally, 100KM is considered to be the threshold for synchronous storage replication of Exchange Server data.

Exadmin provides access to all public folder hierarchies, also named public folder trees, on an Exchange server.

For detailed information about Exchange server cluster restore processes, see "Restoring Exchange Clusters. "

As previously mentioned, all non-essential services for a back-end Exchange server are disabled.

Use the Get-EventLogLevel cmdlet to display a list of categories and their logging level for a specified Microsoft Exchange server.

Exchange Server Administrator role and local Administrators group for the server where the cmdlet is run.

The Microsoft Distributed Transaction Coordinator (MSDTC) resource is required for Exchange Server Setup and Service Pack Setup.

Depending on your certificate type, you may choose Exchange server security instead.

During the installation of Microsoft Exchange Server 2007, Setup runs a set of tasks that install new services.

Mailboxes with policies that include managed custom folders require an Exchange Server Enterprise client access license (CAL).

For an Exchange server, performance degradation has the symptoms of increasing mail queues or poor client response.

Regardless of architecture, many factors affect the performance of an Exchange server.

Exchange administrators can no longer maintain Exchange Server Side Scripts.

Exchange Server is an e-mail-based collaborative communications server for businesses.

It provides all the important conceptual and procedural information you need after you deploy Exchange Server.

Exchange Server Deployment Tools are tools and documentation that lead you through the entire upgrade process.

Under Microsoft Exchange Server, if the Use Cached Exchange Mode check box is selected, Cached Exchange Mode is turned on.

For more information about Outlook and Exchange compatibility, see Outlook and Exchange Server Compatibility.

Backing up the critical data in your Microsoft Exchange Server 2007 organization is a necessary operational task for all organizations.

The topics in this section help you troubleshoot problems that you may have with public folders in Microsoft Exchange Server 2007.

This topic describes tools that are useful in troubleshooting issues with Microsoft Exchange Server 2007 high availability configurations.

First, the performance load of tape backup operations can be removed from your Exchange server.

This topic provides guidelines for storage configurations that provide good performance for Exchange Server.

Provides Active Directory topology information to several Exchange Server components.

Planning Active Directory Information about how Exchange Server integrates with Active Directory.

Each UM object within Exchange Server 2007 is necessary to support Unified Messaging in an Active Directory environment.

To log information about messages that are sent over your messaging system, you can use Message Tracking Center in Exchange Server.

Your Internet service provider (ISP) notifies you that your Exchange server is delivering unsolicited commercial e-mail (UCE).

An SPN is a unique identifier for the services running on an Exchange server.

Exchange Server Edition used to scan all SMTP traffic on Exchange servers.

Unlike mailbox data, public folder data can be replicated directly by Exchange Server.

The Exchange server that logged this event is trying to connect to a domain controller that is not working correctly.

Make sure that there is at least one mailbox database on the Exchange server that logged this event.

Therefore, Exchange Server Administrators cannot uninstall an Exchange server.

The actions that Exchange Server and Outlook take depend on your SCL threshold settings.

Active Directory schema was not extended correctly during Microsoft Exchange Server setup.

Microsoft Exchange Server 2007 includes a completely new SMTP protocol and transport stack, and does not include any NNTP service.

A command-line interface and associated command-line plug-ins for Exchange Server that enable automation of administrative tasks.

Provides monitoring, maintenance, and directory lookup services for Exchange Server.

The system attendant does not load the DSProxy component on a server that is both a global catalog server and an Exchange server.

A directory that contains entries for every group, user, and contact within an organization's implementation of Exchange Server.

Exchange Server Administrator role and local Administrators group on the node hosting the clustered mailbox server.

Collect estimated statistical information from a single mailbox store or from across an entire Exchange Server organization.

A routing group is a collection of servers running Exchange Server that are connected by permanent network links.

A front-end server is an ordinary Exchange server until it is configured as a front-end server.

Make a backup of the queue folder on your Exchange server.

When transitioning to Exchange 2007, you cannot perform an in-place server upgrade on an existing Exchange server.

Microsoft Outlook may fail when connecting to a Microsoft Exchange server.

If individual journal rules are enabled, but the Journaling agent is disabled, Exchange Server 2007 does not apply the journal rules.

Replication technology can provide high availability for Microsoft Exchange Server data.

This section assumes that you are familiar with the general concept of message handling in Exchange Server 2003.

Our ultimate goal is to strengthen Exchange Server against such problems so that it protects itself from service outages.

The wizard creates an additional SMTP virtual server on your Exchange server.

Install and configure a firewall client for the appropriate protocols on the recipient's Exchange server.

Additionally, both protocols have limited access to calendar information for Exchange Server.

The message categorizer then stamps the fully qualified domain name (FQDN) of this Exchange server on the MAILMSG object.

Verify the performance and stability of the disk subsystem before putting the Exchange server into a production environment.

In Microsoft Exchange Server 2007, you can specify which domains receive out-of-office messages.

Each mailbox that has managed custom folders requires an Exchange Server Enterprise client access license (CAL).

If your organization uses Microsoft Exchange Server, your e-mail administrator can control which file types are blocked.

Both Microsoft Exchange Server and Microsoft Windows report warnings and error conditions to the event logs.

Exchange Server 2007 Enterprise Edition supports up to 50 storage groups.

Exchange Server 2007 lets you record all e-mail messages that move through computers that have the Hub Transport server role installed.

To retrieve the current status of an Exchange server or database, use the Status parameter.

server-side: connect handset side to connect PC terminal, And the handset-side data exchange, server-side and ERNIE side data exchange, etc.

A single Exchange server that provides all Exchange services and stores all Exchange data for the entire organization.

By default, when a Microsoft Exchange Server 2007 recipient is created, it is not enabled for Unified Messaging (UM).

If you configure two virtual servers on a single Exchange server, be sure to use a unique combination of IP addresses and ports.

Active Directory objects are required for the deployment and operation of Microsoft Exchange Server 2007 Unified Messaging (UM).

The MTA directory object is located under each Exchange server object in the configuration directory partition.

By blocking specific HTTP requests, the URLScan security tool helps prevent potentially harmful requests from reaching your Exchange server.

Microsoft Exchange Server 2007 enables you to restrict access to Microsoft Exchange ActiveSync by using the device ID.

Assuming a 20 hour per day processing window, this gives an archiving volume of up to 240, 000 mails per day per Exchange server.

This topic lists the filterable properties for the -Filter parameter in the release to manufacturing (RTM) version of Exchange Server 2007.

Microsoft Exchange Server 2007 introduces several architectural changes from previous versions of Exchange Server.

If you use an Exchange Server e-mail account, we recommend that you use Cached Exchange Mode.

LCR and CCR completely change the database size recommendations in previous versions of Exchange Server.

A user or group account that was deleted remains in the global address list (GAL) on servers that are running Microsoft Exchange Server.

The following figure shows one possible storage group and store configuration on a server running Exchange Server.

A clustered mailbox server was called an "Exchange Virtual Server" in previous versions of Exchange Server.

The backup agent establishes communication and initializes a backup with the MSExchangeIS service on the target Exchange server.

The following code example returns the names of all Exchange Server computers that have the Client Access Server role installed.

You can perform an incremental replay on the original Exchange server or on another Exchange server in the organization.

Your Exchange Server administrator has blocked the version of Outlook that you are using.

In this case, you can run Outlook in Unicode or non-Unicode mode on an Exchange server.

Provides content to the Microsoft Search (Exchange Server) service for indexing.

Specific versions of Windows Server and Exchange Server are required to create Exchange clusters.

The Database Recovery Management and Database Troubleshooter tools are also included in Microsoft Exchange Server 2007.

Simulate the delivery of multiple MAPI client messaging requests to an Exchange server.

Exchange Server relies on your DNS servers to resolve domain names.

From the connectivity to Microsoft Exchange server and the ease of mobile e-mail, the Blackberry is far superior to the iPhone.

This topic describes the effects of file-level antivirus programs on computers that are running Microsoft Exchange Server 2007.

The SCR target can be local or remote, and can be a standby Exchange server or a cluster.

Managed default folders require only an Exchange Server Standard client access license.

Microsoft Exchange Server 2007 supports a server architecture that distributes server tasks among different server roles.

Your Exchange server then responds by listing the SMTP and ESMTP verbs that it supports.

This limit is set at the Simple Mail Transfer Protocol (SMTP) Virtual Server level in Exchange Server.

Users cannot download offline address books in a Microsoft Exchange Server 2007 environment.

This information varies depending on the version of the back-end Exchange server.

Welcome to Microsoft Exchange Server 2007, which provides a reliable messaging system, with built-in protection against spam and viruses.

You can configure Exchange Server to rely on your internal DNS servers.

Exchange System Manager always uses the NetBIOS name of the target Exchange server.

To help secure your Exchange server clusters, back up specific information that is stored on each server in the server cluster.

The Client Access server role and the Mailbox server role can be installed on the same Exchange Server 2007 computer.

The information in this folder may help your organization's support team or Microsoft Exchange server administrator determine what is wrong.

Make sure that at least one global catalog server is available for the Exchange server to communicate with.

This parameter specifies which Exchange server language should be used by default when you create external DSN messages.

Exchange 2007 introduces several architectural changes from previous versions of Exchange Server.

If you use an Exchange server e-mail account, it is recommended that you use Cached Exchange Mode.

Locate documentation written and reviewed by the Exchange Server team for up-to-date information and procedures for Exchange Server 2007.

This topic provides information about ports, authentication, and encryption for all data paths used by Microsoft Exchange Server 2007.

Adding Certificate Manager to MMC is part of configuring Secure Sockets Layer (SSL) for Microsoft Exchange Server 2007.

To deploy Microsoft Exchange Server 2007 in a topology with a multiple forest, you must first install Exchange Server 2007 in each forest.

This guide discusses Exchange Server front-end and back-end server architecture and topology.

This guide discusses how to configure and run Microsoft Exchange Server clusters in a security-hardened environment.

Create the maximum number of storage groups per Exchange server.

In the Microsoft Exchange Server 2007 Help file, parameter sets are displayed in the Syntax section of the cmdlet help topic.

This topic provides a checklist of the optional tasks to perform after you install Microsoft Exchange Server 2007.

This topic describes troubleshooting steps for message delivery failures in Microsoft Exchange Server 2007.

The public folder connection agreement replicates the public folder directory objects between Exchange Server 5. 5 And Active Directory.

You want to generate organization charts from existing personnel data stored in Microsoft Exchange Server or Office Excel 2007 data files.

Each mailbox that has managed custom folders requires an Exchange Server Enterprise CAL.

For more information about how Exchange 2007 coexists with earlier versions of Exchange Server, see Planning for Coexistence.

When a mixed cluster network has been configured, Microsoft Exchange Server 2007 uses that network for log shipping.

You should add this procedure to your Exchange server build out documentation and to your Mailbox Store creation documentation.

The Microsoft Exchange Server 2007 Unified Messaging (UM) server role introduces new concepts in Exchange messaging.

In Exchange Server 2007, the Edge Transport server uses the categorizer to route the message to the appropriate destination.

This guide discusses some best practices when using Exchange Server public folders.

Download Microsoft Exchange Server Database Utility Guide to print or read offline.

Be aware that in Exchange 2000 Server 'Everyone' has read permissions to the message tracking log share on each Exchange server.

An Exchange Server 2007 server role that provides e-mail storage and advanced scheduling services for Microsoft Office Outlook users.

Exchange Server 2007 must be installed prior to installing this update rollup.

Share My Calendar does not appear unless you are using an Exchange Server e-mail account.

A full computer backup will help you restore an Exchange server before restoring Exchange data.

This client provides administrators with an interface with which to manage an Exchange Server 2003 organization.

Typically when you use Microsoft Exchange Server, your e-mail messages, calendar, and other items are delivered to and stored on the server.

For optimal security, run IIS Lockdown Wizard on each Exchange server and domain controller in your organization.

Office Outlook 2007, used in conjunction with Exchange Server 2007, offers a rich and complete Outlook experience.

This glossary helps explain the core concepts and technologies associated with Microsoft Exchange Server 2007.

We recommend that you require all external clients to use SSL to connect to Exchange Server 2007.

Use Exchange System Manager to determine which Exchange server is running the MSExchangeSRS service in your site.

When you access an Exchange Server e-mail account, your messages are saved on the e-mail server until you delete them.

Microsoft Exchange Server has detected that Basic authentication is being attempted between this server and server %1.

When a MAPI client (such as Outlook) starts and connects to an Exchange server, the client registers itself with the Information Store.

It should have Exchange Server Authentication enabled.

Setup. Com supports command line switches for performing scripted or quiet installations of Exchange Server 2007.

If you use multiple SMTP virtual servers on a single Exchange server, be careful when you configure them.

This topic provides detailed information about the Microsoft Exchange Server 2007 transport permissions model.

The WinRoute tool connects to the link state port, TCP port 691, on the selected Exchange server and extracts the link state table.

To resolve this issue, run the "Grant Mailbox Permission" script from an Exchange Server computer.

As you plan your Exchange Server 2003 deployment, use this guide to help design and optimize your environment.

The first Exchange server installed in a site contains site folders.

Exchange Server 2007 uses a new type of MNS quorum with file share witness to support failover clusters in different physical locations.

Do not confuse the Exchange Server Administrator role with the Exchange Server security group in Active Directory.

This topic provides information about how to subscribe the Edge Transport server to the Microsoft Exchange Server organization.

Exchange Server 2007 improves administrative delegation by using property sets for most mail recipient attributes.

The account you use to run the command must be delegated the Exchange Server Administrator role on the server where you run the command.

For more information about editions, see Exchange Server 2007: Platforms, Editions, and Versions.

For more information about security and protection with Exchange Server 2007, see Security and Protection.

Microsoft Exchange Server 2007 uses an Extensible Storage Engine (ESE) database for queue message storage.

You cannot install the first instance of an Exchange server in your domain by using a delegated account.

Error %1 initializing the Microsoft Exchange Server Internet Conversion Library.

In Exchange Server 2007, the most common filters are defined as precanned filters, which contain a simple and intuitive filter control.

Then apply the same Exchange server service pack and hotfixes that were present before.

Use a wizard in Office Visio 2007 to generate an organization chart from a Microsoft Exchange Server global address list.

In Exchange Server 2003, a single server supports up to four storage groups and a single storage group supports up to five databases.

Microsoft Exchange Server 2007 includes a default self-signed Secure Sockets Layer (SSL) certificate.

Where server IP address is the IP address of your Exchange server, and 25 indicates a connection to TCP port 25.

The release to manufacturing (RTM) version of Exchange Server 2007 has remote streaming backup enabled by default.

In the Services console, on the Exchange server, make sure that the Microsoft Exchange System Attendant service is in a Started state.

This section guides you through the process of removing the last Exchange Server 5. 5 Server from your organization.

This indicates the value of the RootDropDirectoryPath parameter is the Microsoft Exchange Server 2007 installation folder.

Update Rollup 4 for Exchange Server 2007 resolves issues that were found in Exchange Server 2007 since the software was released.

This topic discusses several factors that you have to consider when you use Microsoft Exchange Server 2007 to deploy journaling.

You cannot perform this procedure in the release to manufacturing (RTM) version of Microsoft Exchange Server 2007.

If the user account is in a different forest from the Exchange server, the password expiration warnings will not work.

It is recommended that Microsoft Exchange MTA Stacks service is running on every Exchange server.

File bugs or provide suggestions to Microsoft about Exchange Server.

In Microsoft Exchange Server 2007, you can install the Client Access server role on your Exchange 2007 computer.

The same task might even be used to service another Exchange server.

Find the tools you need to help run Exchange Server 2007 efficiently.

When an incoming call is unanswered or the line is busy, the call is correctly routed to an Exchange Server 2007 Unified Messaging server.

If the file is present, ensure that the file is of the correct version for the Exchange Server Version installed.

Expand Servers , expand your Exchange server, and then click Queues .

To perform this test, telnet to port 25 of your Exchange server's IP address.

Resolution 2 - Configure the IIS Lockdown Tool to work correctly with Exchange server.

For more information about how to start Exchange Server Deployment Tools, see "Exchange Server Deployment Tools" earlier in this topic.

It is possible that the public folder store on the Exchange Server is corrupt, but this is not definite.