dielectric

Dielectric barrier discharge is one of major devices used for generating non-equilibrium plasmas.

A dielectric waveguide integrated plasma lamp is disclosed for powering a small and bright bulb with a diameter of a few millimeters.

It is a dielectric waveguide, with conductor walls consisting of two lined via- holes, herein referred to as the "laminated waveguide" .

So that ferromagnetic dielectric material with its own reflection of light permeability of a relationship.

A good interface characteristic can be maintained, and a leakage current of a dielectric film can be decreased.

The circuit board comprises a dielectric layer, a circuit layer and at least one electricity-conducting joint pole and a solder mask.

The integrated circuit further includes a dielectric material filled into at least a portion of the at least one opening.

The circuit layer is contacted with the dielectric layer and is provided at least one gasket joint.

and a trench disposed in the ILD, overlying and enclosing the sensor element, and filled with a first dielectric material.

A low temperature sinterable dielectric ceramic composition, as well as a multilayer ceramic chip capacitor and a ceramic electronic device.

But when the plasma density reaches their critical density, the surface wave propagates in plasma and dielectric rod are both decay wave.

Deep dielectric charging and discharging effect is one of the key factors threatening satellites safety in space environment.

And the use of the knowledge of the BST prepared to undertake a number of performance tests, focus on its non-linear dielectric properties.

We also studied the effects of these flows on dielectric properties of a tissue in the radio frequency range.

A plasma lamp including a waveguide body consisting essentially of at least one solid dielectric material.

A water electrode was used to realize dielectric barrier uniform glow discharge at sub-atmospheric pressure in a vacuum glass cavity.

The leading direction of low-dielectric property is to decrease reinforced material and 'composite' reinforce-material .

If the metal material and the general dielectric photonic crystal materials get together, it will hopefully get better optical properties.

The main variables affecting EOF mobility are the dielectric constant and viscosity of the buffer and the size of the zeta potential.

A water electrode was used to realize glow dielectric barrier discharge at sub-atmospheric pressure in a vacuum glass cavity.

WEDM in gas is a kind of newly developed technology, in which gas has been used as a dielectric.

There are two main types of electroactive polymer (EAP), which are usually referred to as ionic and dielectric (see diagram).

compact , lightweight - the solid dielectric viper weighs considerably less than comparably rated oil insulated devices.

Each antenna is based on (a) radiating element(s) on the surface of a dielectric substrate.

In the continuum dielectric theory one considers the interactions between the test particle and its polarization cloud.

Effect of spatial coherence on radiation pressure and a pulsed Gaussian acting on a Rayleigh dielectric sphere was mentioned.

The results showed that the spontaneous emission rate depends on the width and refractive index of the two-layer dielectric.

Of or relating to a crystalline dielectric that can BE given a permanent electric polarization by application of an electric field.

The result shows a great importance to dielectric barrier discharge at atmospheric pressure and its application of material modification.

In one exemplary embodiment, the dielectric support 110 is selectively molded with at least two plastic materials.

a. Dielectric breakdown strength: 5000 Vrms minimum. Higher values might be needed to perform acceptable in various products.

Metal fins may be provided between the grounding plate and the transmission line in the stack of the dielectric material layers.

This solar panel coating also offers excellent abrasion resistance and has good dielectric properties, according to the company.

Penetration depth was a function of dielectric property positively correlated with temperature.

Therefore, dielectric fluid may have to be circulated at relatively large rates to prevent metallurgical changes.

The phase shift of a dielectric media HR film is then analyzed and optimized to obtain a dielectric media polarization-preserved HR film.

A grounding plate and a transmission line are provided in a stack of dielectric material layers.

A first interlayer conductive joint hole is formed on and through an interlayer dielectric layer and a dielectric etch stop layer.

For instance, erbium or cerium can be within silicon nanocrystals dispersed throughout dielectric material of optical signal conduits.

The dielectric sensor sortation system may be either analog or digital, depending upon the particular implementation.

The second insulating layer is made of a dielectric material having fluidity prior to hardening, e. g. , an acrylic resin.

PCBs are broadly used in electrical equipment as dielectric fluid and caused widespread contamination of their storage sites.

Applications for Measuring Voltage from High Resistance Sources: Capacitor dielectric absorption and electrochemical measurements.

An optical fiber is a dielectric (nonconductor of electricity) waveguide made of glass or plastic.

Semiconductor nanocrystals have unique optical and electrical properties, due to quantum size effect and dielectric confinement effect.

A transistor may be formed with a first polysilicon layer covered by a dielectric.

The sheath can be a thin dielectric coating and the plurality of conductive strands can each be taller than one-quarter wavelength.

Barium titanate (BT) is a very important electronic ceramic materials with excellent dielectric and piezoelectric properties.

The invention provides an electronic element with a mixed high dielectric material layer and the manufacturing method thereof.

The PTFE foams having different dielectric constants could be prepared with different formulation to meet various need of application.

Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method.

However, today's WEDM process is commonly conducted on work pieces that are totally submerged in a tank filled with dielectric fluid.

Due to the conductive behavior of Ni-Co alloy thin films, high dielectric can be obtained in microwave frequencies.

The germanium oxide layer and the metal oxide layer are converted into a first dielectric layer.

The polyvinyl chloride fiberglass sleeving possesses good qualities of dielectric, chemical resistance, excellent softness and elasticity.

The structures, properties and applications of laterally fluorinated negative dielectric anisotropy liquid crystal compounds are reviewed.

The cutoff characteristics of dielectric-filled circular holes embedded in a dispersive plasmonic medium are investigated.

When an inhomogeneous plane wave is introduced into a dense dielectric layer, it can bounce between the two boundaries.

Embodiments include forming zirconium silicates as dielectric layers in devices in an integrated circuit.

The dielectric layer comprises a plurality of openings which are formed on the heat dissipation thin layer.

So, with increasing of number of heterogeneous interface, the microstructure and dielectric properties of films were improved.

A treating agent composition for increasing the hydrophobicity of an organosilicate glass dielectric film when applied to said film.

Dielectric fluid is circulated under pressure by a pump, usually through a hole in the tool electrode.

This study provides a new understanding on the spontaneous emission rate of an atom in different dielectric slab.

TGA and High Voltage Bridge are used to test the dielectric loss factor and the breakdown voltage of the solvent-free insulating varnish.

The high performance of this product is a result of the Intersil Dielectric Isolation process.

In an embodiment, the method includes forming a gate dielectric layer on a semiconductor substrate.

Secondly, the mechanism of the new atomization device was studied with the dielectric theory and the basic theory of solid state physics.

Uniform glow-like discharge is generated in a spark pre-ionization assisted dielectric barrier discharge device at atmospheric air.

and flattening the surface of the metal front dielectric layer outside the flat through hole to form the plug structure.

By designing an extremely thin cell(ETC) with two parallel dielectric planes, high resolution spectroscopy can be achieved.

Ferromagnetic dielectric material from the analysis of the characteristics of the commonly used starting materials of iron magnetic media.

The composite laminates had excellent dielectric properties, good mechanical properties, good solvent resistance and low water absorption.

The resulting optical waveguide devices multilayer dielectric characteristics of the analysis.

and a third conductive via extending through the second dielectric layer and in contact with the conductive cap.

The ferroelectric thin films had good crystallization behaviour, excellent dielectric and pyroelectric properties.

The voltage, frequency, temperature and dielectric permittivity dependent fatigue properties of BLTF are calculated with the extend model.

GaAs FET Oscillator stabilized by a dielectric resonator with a feedback loop has been developed.

Harmonized system of quality assessment for electronic components. Sectional specification. Polyester film dielectric capacitors.

and a first dielectric layer underlying and adjoining the semiconductor layer.

The experimental results have shown that dielectric discharge can be initiated by high energy electron exposure.

The net-shaped formation positions of the reinforced metal patterns can prevent the flexible dielectric layer from crinkling or deforming.

The outer circumference of the dielectric member has a shape spreading from the conical surface side toward the flat surface side.

Conductor in static electric field, dielectric polarization , electric displacement vector and Gauss theorem in dielectric medium .

This allows the metal to be selectively plated on the dielectric support only forming on those areas having the first plastic.

The intent of the dielectric test is to stress the insulation for a short period of time and check that it does not fail.

Next, in step five a transparent polyester film or ultraviolet activated dielectric coating is applied to the entire surface of the lamp.

DELAMINATION: A planar separation of materials (i. e. separation between conductor and base material, prepreg, dielectric material, etc. ).

The center frequency of the passing band is the same as the resonance frequency of the dielectric resonators .

The present composition is particularly useful as a dielectric material in microelectronic applications.

The frequency characteristics and the temperature characteristics of the dielectric constant ( ) changed nonlinearities.

The wide-beam technology for the Satellite TV receiver antenna array is realized through microstrip dielectric antenna technology.

Because glass is flatter than ordinary dielectric layer, better emission uniformity can be obtained.

This paper presents a feed-back dielectric oscillator and a method of calculating its dimension.

meanwhile the reflective layer is arranged on the first dielectric layer and is positioned above the region without doping.

In this method, the non uniform media is approximated by multi layer dielectric media and modeled as a cascaded transmission line.

The advantage of a dielectric coated mirror is its longevity. Unless abused, they will last a lifetime.

The network security, this paper dielectric from the firewall, attack and emergency response, intrusion detection, several simple hackers.

As a main function parameter of dielectric material, measurement methods of permittivity are diverse.

In this device, called a plasmon slot waveguide, adjusting the thickness of the dielectric core changes the wavelength of the plasmons .

Water tree degradation in XLPE dielectric is an earlier period aging phenomenon during operation of XLPE power cable.

Research on the dielectric barrier discharge nitrogen nitriding at atmospheric pressure have consumedly progressed.

The results revealed that the bias characteristics of dielectric constant showed a temperature - dependent peak at small bias levd.

The optimum helix angles under different dielectric viscosity, pressure and rotating speed were acquired by analyzing the dynamic stability.

Using dielectric barrier discharge (DBD) effect, atmospheric pressure non equilibrium plasma nitriding is carried on at self made equipment.

In this thesis, dielectric hydroxyl groups (OH groups) defects forming mechanism influenced by the environment is studied.

Tunneling allows voltage to flow from the control gate to the floating gate through the dielectric layer of oxide which separates them.

The smaller the refractive index of dielectric of defect mold is, the better the performance of super narrow band optical filer is.

Dielectric barrier discharges (DBD) for generating non-thermal plasma at atmospheric pressure for textile processing are reviewed.

EM hyperlens is a cylindrical structure consisting of periodically arranged metallic and dielectric material layers.

The electrodes in themselves are combined with dielectric insulating materials with controlled bio-compatibility.

And proper content of nano-Al2O3 could improve dielectric breakdown strength of these composites.

Finally, the paper has analyzed influence of the different dielectric constant and medium to the imaging quality.

while quality of the dielectric film can also be improved by decreasing remnant current and adding anneal times.

The dielectric ceramics with high dielectric constant have potential application in the electronic device with small size and integration.

In a high level with barium titanate, the small amount by addition of carbonyl iron resulted in the sharp rise on dielectric loss.

The transition point shifts to high temperature as the lithium content increases, and the dielectric peak becomes broaden.

The interlayer dielectric film formed by the method has a low dielectric constant and shows superior mechanical properties.

Essentially, photonic crystals contain regularly repeating internal regions of high and low dielectric constant.

The dielectric spectroscopy theory attracts much interest in recent years, and the according measuring techniques have developed rapidly.

The dielectric and piezoelectric responses of single-domain PT and BT are very sensitive to the phase transition.

Air can be used as a dielectric between the plurality of conductive strands.

High-frequency dielectric heating installations. Test methods for the determination of power output.

A flow of electricity in a dielectric, especially in a rarefied gas.

Harmonized system of quality assessment for electronic components. Sectional specification. Fixed mica dielectric. D. C. capacitors.

This paper presents a full-wave analysis of electromagnetic (EM)field distribution inside a dielectric prolate spheroidal human head model.

All-dielectric multi-cavity filter: high transmittance of the peak, well-rectangularity, deep cut-off spectrum.

In the case of dielectric breakdown, a different type of acceleration occurs.

The method we discussed may be significative to the research of dielectric and material modification.

NTBI induced device degradation can be suppressed by a SiN capping layer between Poly-Si gate and high k dielectric layer.

Development process of the microwave dielectric ceramics and present status of the molding techniques are introduced.

Then, forms a channel layer on the grating dielectric layer, and the material of the channel layer is shallow impurity non crystal silicon.

Various absorber of two-dimension periodic is composed of metal base and coating of lossy dielectric.

Photonic crystals is a new type of optical material whose dielectric constant changes alternately following the coordinates of space.

The mutual interference of dipoles existed under an external electric field and caused the asymmetric dielectric relaxation peek.

The pattern of the dielectric layer and the control grid can be formed on the floating grid orderly.

drying organic gate dielectric materials, and evaporating and depositing an organic semiconductor layer.

Carbon nanotube cathodes are formed by screen-printing, and dielectric layer or gate are no longer needed.

The influence of feed on finishing high-speed wire electrical discharge machining(WEDM)in atmosphere and emulsion dielectric is studied.

More, the dispersion characteristic is better, the cut-off wavelength is longer when loaded inhomogeneous dielectric in ridge area, etc.

The effect of the polarization field on the piezoelectric and dielectric properties of PVDF films was also studied.

In this paper, we present a new direct method for solving the problem of a multilayer dielectric planar waveguide.

The influence of peak current on finishing high-speed wire electrical discharge machining (WEDM) in gas and emulsion dielectric is studied.

The prepolymerization of bismaleimide can increase dielectric loss dissipation.

The results indicate that BaTiO3 had different effects on electrical conductivity and dielectric properties of the composite material.

The dual-mode filters have simpler arts and crafts, so they are more convenient for applications relative to the dielectric filters.

The PEA spectrums indicate that the involvement of nano-MMT can decrease the amount of space charge in dielectric.

This paper mainly researches electromagnetic scattering from dielectric bodies of revolution above a lossy half space.

As how the application of ferromagnetic dielectric materials has been growing concern.

When microwave conveyed to the end of dielectric rod, the incident wave and reflected wave formed standing wave in the rod.

With standing waves, either ice-dielectric heating or skin-effect resistive heating would, acting alone, result in uneven heating.

The high-frequency and high-voltage pulse power source is the core part of the dielectric barrier discharge.

This paper studies the deep dielectric charging and discharging phenomenon with ground experiment facility.

A cascade network decomposition method for measuring the complex dielectric constant of mushy materials is proposed.

Epoxy resin is a common kind of electric material which has excellent mechanical and dielectric properties.

The present invention is independent with the dielectric constant of the liquid drop, and has small size and high precision.

The results show that the developed model can guide the design and application of the conically-shaped dielectric EAP actuators.

The degree of of dielectric dispersion is affected by water saturation salinity of water and clay quantity.

The SPR is very sensitive to the size, shape, dielectric properties of the nanoparticles and dielectric environment.

The comparing experiments in common dielectric and powder-mixed dielectric prove the conclusions are correct.

The experiment result shows that deep dielectric discharging can disturb testing circuit seriously.

the first and second pixel electrodes are arranged on the dielectric layer and connected to the first and second drains, respectively.

The intermediate member may include a plurality of dielectric layers, the edge parts of which have widths different from each other.

effects of angular momentum on a dielectric and on the quantum properties of orbital angular momentum.

Midnight a wrong number of telephone, changed the big north plow dielectric life!

The experimental results show that the device can accurately measure the dielectric loss factor.

This paper presented a new-type design scheme for monitoring the dielectric dissipation factor of capacitive apparatus.

The dielectric layer is arranged between the solid state electrolyte layer and the metal layer.

dielectric resonators image rejection image recovery conversion loss ratio.

It is proved that powder granularity and conductivity have clear influence on powder mixed dielectric mirror EDMed surface roughness.

This parameter is the current flowing through the sample subjected to the dielectric.

Leakage Current: A small amount of current that flows across a dielectric area between two adjacent conductors .

Compared to the compound dielectric cylinder, the single one has not produced a new band gap.

A modified Johnson-Nyquist equation is derived for calculation of the dielectric loss noise.

Dielectric absorption is calculated from the residual voltage value, as described in the previous paragraph.

The present invention discloses a glass composition for preparing electronic glass fibre with low dielectric constant.

Hermetically sealed fuel tank and dielectric design , reliable operation .

A shield dielectric layer insulates the at lease one conductive shield electrode from the semiconductor region.

and then, preparation processes and testing criterion of BT high dielectric composite thin film were introduced.

It is achieved thereby that the tunnel diode has various switching states in dependence on the remanent polarization of the dielectric (3).

A design method of the microwave low phase noise dielectric resonance oscillator is presented in this paper.

Dielectric constant of the composites decreases with amount of PTFE and glassfibers increasing.

DIELECTRIC STRENGTH MEMBER USED IN OPTICAL FIBRE CABLES.

Dielectric constant and loss factor of PTFE composites increase with increasing filler content.

The capacity to store electricity temporarily by dielectric polarization.

As a quasi 2-dimension EM structure, the material and thickness of the dielectric layer also have a great impact on the performance of FSS.

This provides a theoretical basis for the engineering design of fuze dielectric rod antennas.

According to the working principle of dielectric elastomer swinging actuator(DESA), swinging actuator is designed and manufactured.

With the increase of (BaCa)ZrTiO3, the composite films'thermal stability , dielectric constant and dielectric loss were increased.

Inversion of Dielectric Logging Data and Its Application.

The equivalent capacitance of inspected apple, one of dielectric parameters, is used as characteristic for sorting.

It consists of a transparent dielectric spacer.

Other typical low current measurements on wafer level semiconductors are related to the dielectric, either the oxide or compound quality.

If only dielectric loss angle of grain was measured, the measuring system can get grain moisture content by seeking table and calculating.

The effects of dielectric breakdown were simulated by particle system using a statistical model.

Several simple dielectric rest objects have been utilized.

Several simple dielectric test objects have been utilized.

The partially resonant condition is related to the dielectric constants of the core and the shell and the depolarization factor.

The preparation process , dielectric property and optical property of Ta2O5 thin film been deeply researched by investigators .

The results showed that thermal conductivity and dielectric property of samples fabricated by SPS were prior to those fabricated by HP.

Based on the mechanism of rain attenuation, the special attenuation by rain is calculated by the equivalent dielectric permittivity model.

ADHESIVE TAPES FOR ELECTRICAL PURPOSES. DIELECTRIC RIGIDITY. SHORT TERM TEST.

Research on domestic and foreign development of microwave dielectric ceramics is introduced and future prospect is discussed.

Generic specification for fixed metallizedpaper dielectric capacitors for.

The wideband antenna can have low dielectric losses while maintaining a multi-octave bandwidth.

In this paper, a plasma jet of argon has been achieved using dielectric barrier discharge (DBD) in flowing argon at atmospheric pressure.

Mainly analyzing the using of dielectric lens antenna and cassegrain antenna in MMW detection system.

The present invention aims to suppress deterioration in reliability of wiring and to reduce effective dielectric constant of wiring.

Moreover, a stack of several dielectric EAPs can generate substantial forces using little power.

The reliability of strain silicon, gate dielectric and copper interconnection are discussed, and some new researches are presented.

Portable fire extinguishers. Part 2 : tightness, dielectric test, tamping test, special provisions.

Due to dielectrostriction, the dielectric property of dielectric will change under stress.

Reasons for thermo bimetal's corrosion lie in direct dielectric corrosion and stress flaw corrosion.

Then, designed and implemented the digital dielectric loss on-line monitor system in this foundation.

The dielectric filters and dual-mode filters accord with the above-mentioned conditions.

The switching state is maintained until the polarization of the dielectric (3) changes.

A composite ice model composed of salty ice and pure ice was proposed, and the ice structure was analyzed by dielectric physics.

A novel laser trimming method is developed for microwave ceramic dielectric resonator.

But the introducing of ferromagnetic depress the dielectric properties of carbon fibers.

The electrical properties of, and in the resistivity, dielectric constant are control at the proper level.

TRANSFORMERS. LIQUID DIELECTRIC DRAIN VALVES.

of earlier hopes for plastic insulations, the combination of paper and oil still forms the most effective dielectric at the higher voltages.

That foil embedded in dielectric laminate to support the structure for further processing.

After removing the spacer, the underlying dielectric may protect the lightly doped drains.

The dielectric nonlinearity of the PMN-PZN-PT relaxor ferroelectric ceramics under DC bias was investigated.

The light transmitted and reflected by all-dielectric optically variable pigments varies according to viewing angle.

In the liquid lens, the deformation of a droplet was actuated by forces such as surface tension, adhesion, gravitation and dielectric force.

It indicates that dielectric barrier discharge air plasma has degradation effect on polymers.

A first laminate structure comprises a conductive foil having a layer of embeddable dielectric material laminated thereto.

The process of extra-intestine isn't common. HB, PLT, ESR, ALB as well as dielectric have higher abnormality.

and the alignment marks are arranged on the flexible dielectric layer and positioned in the chip coverage section.

Following, forms dielectric layer on the base board, and the gate dielectric layer covers the gate electrode.

The radiating element is arranged above the dielectric plate 1 grooving along the edge.

Y5V material has highest dielectric constant. Its capacitance and dissipation is sensible to temperature and voltage.

Dielectric loss measuring is the normal item to test the high voltage equipment in electric power system.

The high dielectric constant is characteristic of hydrogen bonded liquids .

Liquid water is still hydrogen bonded at 100C as indicated by its high heat of vaporization and dielectric constant.

It could help to solve the hard problem in dielectric measurements of dispersed ER fluids particles.

o Electromagnetic potentials arrange themselves in groups according to the medium's polarization and the medium's dielectric resistance.

A first dielectric layer covers the common electrodes and the scanning electrodes, and it includes groove shaped field concentration units.

The characteristic frequency of dielectric relaxation are strongly related to the electrical conductivity ofthe solution phases.

A dielectric can be formed on the metal interconnection.

This paper presented a powder mixed near dry electrical discharge machining(PNDEDM), its dielectric is gas-liquid-solid mixture.

and finally forming one second conducting layer on the substrate to fill the dielectric window.

Composite dielectric materials for capacitors of high energy storage density has been studied.

Insulation structure of capacitors: oil-impregnated papers, oilimpregnated dielectric membrane and their combination.

The process is performed in a liquid dielectric, usually paraffin or light oil.

Therefore any electrolytic capacitors within the product will still have a near perfect dielectric layer.

A first electrode layer is deposited over the first dielectric layer.

The dielectrostriction coefficient reveals the degree of strain effect on the dielectric property.