cutting speed

The surface roughness increases while cutting speed increases.

Robust construction, easy operation and fast cutting speed are among the feature of this machine.

And it also found that the tool life of the tungsten carbide tools may be affected by the history of the cutting speed.

With the hydraulic control system its cutting speed can be adjusted randomly by the size and the thickness of the caliber.

There are also other variables that affect the optimal value of the surface cutting speed.

The result shows that improving cutting speed in a certain range contributes to improve the fatigue property of the finished products.

The results showed that: the depth of cut had the main influence on cutting force followed by feed rate and cutting speed in turn.

It indicated that the value of acceleration amplitude for both of the tools raised as the cutting speed increased.

Through the modification of the algorithm, the precision of cutting paper and follow of cutting speed was approved.

Cutting quality depends on the material surface situation, cutting speed and material thickness.

Meanwhile, it features firm structure, smart appearance, fast cutting speed, high precision, high pressure and adjustability etc.

cutting speed is the driving force of the microcrack initiation in shear band and subsequent propagation to the tool tip.

Die-cutting parameters relative to the very simple offset press, the main parameter is die-cutting speed and size.

In addition, too much cutting speed and big nozzle height can cause and the increase of the poor incision width.

Overall, the cut thickness with cutting oxygen pressure relationship is the largest, plasma cutting speed overall is faster.

Quick cutting speed, stable electric arc, small and smooth margin, high efficiency, the work piece distorts slightly.

The article studies the influence of cutting speed to the cutting force in the foundation of high speed cutting experimentation.

In the traditional titanium alloy processing, because both cutting speed and tool life are lower, the cutting efficiency is lower.

Semifinishing and finishing of cast irons, non-ferrous metals &alloys and non metallic materials at medium cutting speed.

The influence of different cutting speed and feed rate on the roughness of vane's finished surface was investigated and analyzed.

The invention has advantages of rapid cutting speed, neat cut section with small slope angle and accurate location length.

Under the conditions of permission of glass processing quality, the high cutting speed and suitable external load should be selected.

A small amount and no serious cases can speed up by adjusting the pressure, to improve the die cutting speed.

The maximum cutting temperature increases with the increase in cutting speed.

Tighten Carbide manufacturing knife, can greatly improve the cutting speed and efficiency of teeth.

when plasma nc cutter in cutting speed is extremely low, as the incision is too wide, arc even put out.

The machine processing features, it is mostly in cutting speed, that in low speed to drive into the torque output to someone.

On cutting principle aspects, it resolves the key problem that cutting speed low in the turning miniature spindles.

The selection of the correct cutting speed has an important bearing on the economics of all metal cutting operations.

Die-cutting indentation aftertreatments main technical parameters work with die-cutting pressure, sizes and die-cutting speed.

Besides, some common technical parameters are customized to optimize the cutting speed.

By adjusting the cutting speed is using thoroughly penetrating material and let it finish materials will be trimmed.

Quick cutting speed-without any preheating-the operators can quickly complete the work.

It features high cutting speed, narrow gap, low distortion, materials saving and low cost.

High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lover.

wide incision will not only waste materials, also can reduce the energy consumption and the cutting speed increase.

Hard, strong metals require a lower cutting speed than soft and ductile materials.

Preheat and perforation of the time needed to cut a long, slow, the cutting speed.

The cutting speed, small thermal deformation, but cut width mouth and cut face big bevel.

Shear angle increases with the increase in cutting speed.

Therefore, the good cutting quality and cutting speed is not divided.

There are many thingsthat should be considered in determining cutting speed.

Big cutter diameter, high cutting speed, good process quality.

Based on cutting experiments, the effects of cutting speed and feed rate on surface roughness in high speed milling are investigated.

Revearsing with metallacarboranes laser cutting speed, precision and high, graphics accurate.

If the material itself to increase the strength, die-cutting speed.

On the premise of cutting quality guarantee, should as far as possible the cutting speed increase.

The high speed machining method has part cutting speed as high as about 10 times that in conventional cutting.

When the cutting speed is over 500 metres per second, cutting temperatures decrease rather than increase.

This allows the user to adjust the cutting speed optimally for the working conditions and material for less waste and more control.

The newly developed explosive cutting technology can increase cutting speed by 20 times, reduce pipe cutting cost by over 5 times.

If not suitable cutting speed, its effect instead, and will make the viscous slag, cutting quality decreased.

Exact size and high cutting speed.

If the surface is unusually hard, the cutting speed on the first roughing cut should be reduced accordingly

When the feed rate is small, the increased of cutting speed can significantly improve the surface roughness of GaAs chips;

The effects of curvature radius and cutting speed on the top kerf width of laser cutting of thin pipe with a small diameter

plasma nc cutter cut the increase of current, plasma arc energy increase, cutting capability, cutting speed is then increases;

cutting current increases, arc energy increase, the cutting performance, and the cutting speed is then increases;

Experience in machine cutting speed and feed related to difference raw materials;

A useful computation method of optimum cutting speed and feed rate;

The Choose of Cutting Speed for Ladder Machine Parts in Turning

Numerical Model of Abrasive Water Jet Cutting Speed Based on Artificial Neural Network

The method of increasing cutting speed of CV flying shear