be set to

At least one of the XML document properties must be set to display an XML document.

Given that RAM is much easier to allocate in a VM, RAM size should be set to whatever you think is a safe minimum for your appliance.

A number of fringe players could be set to leave Anfield and Dalglish said: 'We are happy with the business we have done so far.

The scope of the variable from the first test must also be set to "All tests for this user" for it to be visible to the second test.

Professor Heather said the 'binge drinking limit' could be set to eight units a day, 'or maybe a bit lower'.

At this point, it's worth mentioning that the logger might be set to write output into a separate file to simplify debugging.

To see whichentries are affected, event logging for the offline address list generator must be set to at least medium.

Therefore, the CurrentCulture property can only be set to a specific culture or to the InvariantCulture.

The style parameter of the Show method can be set to display the proper buttons to ask a user for information.

This event handler is called at the very beginning so that the initial screen contents can be set to be viewed.

At the moment the Deadline can be set to no less than 30 days and no more than 180 days after the initial Brief publication.

The privacy setting on your sites and distribution lists must be set to Everyone in order for search to take advantage of this information.

The DB2_CLPPROMPT registry variable can be set to any text string up to a maximum of 100 characters in length.

Can be set to be more WDRC compression or more Linear for your comfort and for your listening preference.

In an actual production configuration, we would expect that the NSF Buffer Pool Size value would be set to a higher value.

For each Author instance, the lastName should be set to the value of the last attribute on the name element.

A chair in which the position of a leg placement section can be set to a position different from conventional ones.

Some inner clocks seem to be set to a timing cycle of about twenty-four hours. These are called circadian rhythms.

In the case of a treeitem, if the node is expanded, the state must be set to true; when collapsed the value must be updated to false.

The length of each eye breaks and the time between breaks can be set to the users desired values.

The id for the object is set to 1, and can be set to any level of the organization to be used as a starting point.

Pinky can be set to run in Robot Mode, where you don't have to do a thing, once it has been activated.

By analyzing the cost of each service, prices can be set to maximize profits and eliminate unprofitable services.

each stages texture coordinate index must be set to its default value . the default index for each stage is equal to the stage index.

This can be set to any number of files and can be changed by writing a new numeric value to the file.

Property should be set to the name of the stored procedure to be accessed.

But he shall not take it so, and his heart shall not think so: but his heart shall be set to destroy, and to cut off nations not a few.

China's auto industry may even be set to see 'negative growth' in the fourth quarter of this year.

I need it the Default font to be set to white and a bit bigger font.

Prefixes can be set to different URIs, but cannot be undefined, at least for XML 1. 0 documents.

Most utilities and other recurring bills can be set to be charged to a credit card or deducted from a checking account these days.

The special register can be set to a desired value to enable certain maintained table objects for a session.

For db2adutl to be able to remove database backups, the Backdel parameter must be set to yes for the TSM node.

In a small business where one DBA fills many roles, these parameters might be set to the same group name.

Can also be set to automatically log into a chat forum posts, thereby increasing the amount of forum posting.

For a Data Table control, the Binds to multi-valued option would be selected, and Attribute for repeating values would be set to var.

Its value should be set to a comma-separated list of attribute names that are to be inherited.

To avoid overloading backend servers, . max_connections can be set to limit the maximum number of concurrent backend connections.

The WorkItemTrackingFieldReferenceName attribute must be set to a valid reference name of an existing work item type field.

Press up and down or modify the search can be set to 0 to 9, press Set button to confirm the completion and the next one is set.

The construction site must be set to hazardous waste storage cabinets, and with obvious warning signs.

Also, many times member variables of a class that point to other classes simply need to be set to null at the appropriate time.

Each parameter can be set to the name of the group of users (defined outside of DB2 UDB) who can have that authority.

The environment variable that must be set to enable this search are shown below for some of the common UNIX operating systems.

This property should be set to a value that allows the service to run at full capacity, and no higher.

If the Text value were not stored in view state, the value would be set to its default, Empty, on each postback.

The Connector format must be set to connector packet for the event to be triggered correctly.

Usually this password can be set to the root password, since it is only root who can read the grub. conf file anyway.

The minimum heartbeat interval must be set to a value lower than for the maximum heartbeat interval .

Either of those situations results in a variable that could be set to an arbitrary value by the user if register_globals is on.

This value must be set to a string of hexadecimal characters to ensure consistent configuration across a Web farm.

Song: A short lyric poem with distinct musical qualities, normally written to be set to music. In expresses a simple but intense emotion.

To enable a given automatic maintenance feature, the corresponding configuration parameter and all higher level switches must be set to ON.

I assume you would just click on the line for that action, hit the key you want that action to be set to and wham you have remapped it.

Even if the above code is linked with many other modules, end will still be set to the address of the last byte of the segment.

Of course, a node security profile property can be set to No Security to explicitly turn off the security.

This setting controls the size of each block, and should be set to your tape drive's block size.

A control's place within the tab order can be set to any value greater than or equal to 0.

Pets can still be set to hotkeys by dragging them to the hotkey bar, much like any other spell or ability.

Once you have been a member for 30 days your account will then be set to a member who may request cash out.

The reason is that the impact of split power to the elements, or changing vibrant, cactus will be set to a value of the heart to accept.

Any configuration updates can be set to deploy automatically or be done manually by an administrator.

The pads can be set to several modes, letting you trigger samples or use them to turn loops off and on.

Using the example above, the balance "currency" can be set to different values based on the bank's policy.

Property should be set to the name of the table to be accessed.

These values should be set to the same protocol and port as the MobiLink synchronization server is using for synchronization requests.

This parameter must be set to a valid CLSID or set to NULL when registering a business logic handler assembly.

The Agent Controller (part of the data collection infrastructure) port on all involved computers must be set to the default (10002).

Finally, in the processReqChange function, you see that I look for readyState to be equal to 4 and status to be set to 200.

The DragEventArgs. Effect property can be set to any value of the DragDropEffects enumeration.

If you don't set this, it will be set to whatever the name of the model is plus _set appended (something like account_set).

It can be set to monitor your hard drive's temperature, the CPU temperature and the general internal temperature of the computer.

The data type of a parameter can be set using the data type style property, which can be set to SQL data type, LIKE or REFERENCES.

If the MessageFormat parameter is set to Mime, the MessageBodyFormat parameter can be set to any valid value.

The time can be set to the nearest second and up to 100 hours in advance.

This tag can be set to a local path, a network path ( "file" ), a registered assembly name ( "assembly" ), or a valid URL ( "url" ).

The page timer will then be set to the length of your talk.

This feature can be set to automatically change your status to "In a meeting" when you attend a Lotus Sametime meeting.

A flag can be set to indicate that the method will continue exporting events even if the specified query fails for some logs.

For this reason, the fuel measurement should be set to a hard zero when the related fuel ESDV is closed ( deactivated ).

The time can be set to the nearest minute and up to 24 hours in advance.

The values in the child column (or columns) can be set to default values.

PEGASUS_PLATFORM -- this must be set to a supported platform identifier.

Manual failover requires transaction safety to be set to FULL and the database to be in the SYNCHRONIZED state.

Accent Sensitivity indicates whether the data is accent sensitive and can be set to True, False, or Auto.

The property can be set to one of four values using sp_addmergearticle, sp_changemergearticle, and the Article Properties dialog box.

Interest rates will have to be set to suit local, not global, growth conditions.

Property should be set to the name of the stored procedure.

The time can be set to the nearest second and up to 1 hour in advance.

The time can be set to the nearest minute and up to 1 hour in advance.

The weekday alarm can be set to sound either each day of the week, each day from Monday to Friday or on Saturdays and Sundays.

The placeholder files also provide a way that file permissions can be set to restrict access to the pages.

Equipped with pressure sensors, displays the actual pressure, pressure range can be set to detect the product is qualified not.

There are multiple settings under this category, which should be set to at least a standard level of security.

Property can be set to any value equal to or lower than 14, only the images at index positions 0 and 1 are displayed as state images.

Additionally, the field component must be set to retrieve the entire row where the text can appear.

When you create a clustered or nonclustered index, the IGNORE_DUP_KEY option must be set to OFF (the default setting).

If you want to remove the password from the destination database, the database password must be set to an empty string.

By careful tethering of the cable the switch can be set to give an ON or Off action at any desired position.

In the event that such expressions are frequently created, this switch can be set to True, to automatically perform the needed cast.

The screen cannot be set to the number of lines and columns specified.

Your photo, your list of friends and your interests as expressed through fan page subscriptions could no longer be set to private.

If the file downloads can be set to automatically dial break halfway on the line and continue to complete the download.

The ShowCheckBoxes property can be set to a bitwise combination of the TreeNodeTypes enumeration member values.

The value has to be set to qualified to ensure that the exchanged SOAP messages will have full-qualified elements as shown below.

Set the Driver type to 4 in this case; it should be set to be consistent with the driver used in the provider (Figure 32).

A threshold can be set to reduce noise and filter out any data in the table view of the rows that have not changed by a specified amount.

Include attachments within calendar items This option requires Detail to be set to Full Details.

The %ORACLE_HOME% variable should be set to refer to the installation point you specified when you installed the client networking software.

The DefaultButton can be set to the identifier for a Button control or any control that implements the IButtonControl interface.

These should be set to point at the LocalEnvironment, as shown in the figure below.

The reminder text and background can both be colored as desired by the user and the text can be set to bold, italic, or both.

You can use Server Explorer to see what the ServiceName should be set to for any given service.

Thus, the defensive line must be set to the same mentality as the most advanced midfielder.

These templates cannot be set to a lower permission.

This property must be set to a value from the MediaState enumeration: Close, Manual, Pause, Play, or Stop.

Property must be set to point to the folder of your line images.

The Min property can be set to a value greater than that of the Max property.

Describes how a column can be set to automatically increment numerical values to ensure a unique column value per row.

The time zone can be set to UTC in expert mode of d-i now as well.

Under that key, the string value, CLSID, must be set to the CLSID of the protocol handler.

The ShowFooter property must be set to true for this property to be visible.

Unless you require XACT_ABORT to be set to ON in triggers, we recommend that you set it to OFF if you are using the -SkipErrors parameter.

The message flags should still be set to indicate that a message is in a group and whether it is the last message.

The property cannot be set to a value less than 0.

If you obtain a software update from Oracle which addresses this issue, this switch may be set to True to disable the NO_MERGE workaround.

The security level for a zone may be set to full trust, medium trust, low trust, or no trust.

It defaults to mail and can be set to any attribute that is part of the user record in LDAP.

dojoAttachPoint: This tag attribute, if specified, must be set to a widget property name.

ONLINE cannot be set to ON when an index is being created on a local temporary table.

If Samba is providing WINS services, this should be set to the IP of your Samba box.

In effect, each state could be set to represent a single unit of work by an individual on the team.

Gets a value indicating whether the ImeMode property can be set to an active value, to enable IME support.

Posture can be set to sit and slowly oxygen, and then in an instant big mouth spit it.

The preferred interaction style for the process interface needs to be set to "Async" .

This guy stood there holds notes, with this pair will be set to take a look at posture.

Before publishing reports, the selected configuration must be set to use a specific report server.

To achieve high oscillation peaks, the design of the transformer has to be set to high reflected voltage.

Specifies a Boolean value that can be set to use Secure Sockets Layer (SSL) when sending an SMTP message over the network.

A new and more meaningful exception can be created, where the inner exception reference can be set to the original exception.

The machine output must be set to a minimum tablet production.

The secondary key can be set to be persistent or temporary.

An environment variable, LD_LIBRARY_PATH, has to be set to point to the path in which the shared library resides.

Central bank buying, which has supported the euro in recent months, could also be set to weaken.

IGNORE_DUP_KEY cannot be set to ON for XML indexes and indexes created on a view.

Otherwise, a four headed arrow cursor will be set to indicate that the component can be clicked and moved.

Some SET options must be set to specific values to use indexed views or indexes on computed columns.

The maximum load factor could be set to a fairly low value to work around this - but the standard requires that it is initially set to 1. 0.

The COM threading model can be set to single-threaded apartment or multithreaded apartment.

Each sorting or grouping level has a number of options that can be set to obtain the results you want.

For audio control, the Balance and Volume properties can be set to customize or animate a media's audio track.

The cost threshold for parallelism option can be set to any value from 0 through 32767.

Many electric c1ocks are combined with radios, which can sometimes be set to turn on automatically.

Non-DX films must be set manually. If not, the film will be set to the default 100 film speed setting.

but its pull as an industrial center could be set to increase substantially.

Each switch can be set to one of five settings that govern the amount of information that is recorded.

GRUB's text interface can be set to use a serial link to provide a remote terminal boot loader access.

The delimiter can be set to either Broker System Line End, or Custom Delimiter (Hexadecimal).

This operation was canceled. A package cannot be set to upgrade itself.

This is not required; the base name in the federated repository can be set to a different name than the actual repository root DN.

The ProjectField attribute must be set to a valid Microsoft Project column.

Once controller processing is done, the content type of the HttpServletResponse must be set to XML.

The Book instance's ISBN should be set to the value of the isbn element, nested in the book-info element.

This will also mean that the LD_ASSUME_KERNEL environment variable can only be set to a value greater than "2. 6. 4. "

Tones are heard where water can be set to vibrating, which is true of a port area draining a river.

Otherwise, it must be set to a number lower than the Maximum Logon Attempts setting.

To edit a file, the permissions for that file must be set to 666.

The Lotus Notes user preferences on the workstation must be set to check for new mail on the server.

Some FTP server or network configurations require this option to be set to True.

Each component in the application server can be set to different information levels.

This property should be set to false in concurrent update scenarios as deadlocks may occur in these scenarios.

If the decision is to decline the loan request, Customer. Loan. Decision attribute will be set to "Declined" .

Note that the AgaviDateTime validator requires the Agavi configuration variable use_translation to be set to true.

The peer for this bridge terminal must be set to complete this operation.

A JAX-WS request context map contains the enableTransactedOneWay property, which can be set to true if this behavior is needed.

Notably, the password could be set to never expire, and the amount of password retries could be increased before the account is locked.

These scripts expect the current working directory to be set to the Bootcontrol partition.

The ActivationPolicy property can be set to one or more of the bit flags that are defined by the dsoActivationPolicy enumeration.

However, if the MessageFormat parameter is set to Text, the MessageBodyFormat parameter can only be set to Text.

This value should be set to greater than 1 to maximum to the number of processors that database partition can use.

Task Manager might be set to Hide When Minimized.

Declare a global variable, CurrentBindingSouce, in these forms to be set to the BindingSource object passed in the constructor.

Indeed, recent statements from Chinese operators suggest the market may be set to cool rapidly.

The skip attribute should be set to true if the whole task group can be skipped.

The ShowLines property must also be set to true for this property to have an effect.

Blend. StartColor and Blend. FinishColor can be set to any Color.

Property can be set to a custom error icon instead of the default.

This means the Indexed property for this field should be set to either No, or Yes (Duplicates OK).

Because the events from the Filter Graph Manager are already on the queue, this parameter can be set to zero, which means not to wait.

Check box can be set to display or not display.

The indicators can be set to the desired measuring range on site by program control.

For two-way synchronization, conflict resolution can be set to Hub wins or Client wins.

GF abilities must be set to a party member for use, or it is ineffective.

It can be docked in the IDE so it's always available, or can be set to slide out of view when you're not using it.

Mr. Greenspan said capital requirements should be set to erase any such benefits for big companies.

Declare a form variable named CurrentBindingSource to be set to the passed BindingSource instance in the form's constructor.

This means that the Indexed property for these fields should be set to Yes (No Duplicates).

These attributes are unlike the others in that they are just name-value pairs and can be set to anything you wish.

The XACT_ABORT SET option should be set to ON for INSERT, UPDATE, or DELETE statements to work.

The reserve policy attribute of the disks must be set to no_reserve.

LOG_STAGING_DIR must be set to a valid value in the HDR server.

Note that the matrix pointer can be set to NULL, in which case the identity transform will be used.

This property must be set to True to restart a package from a point of failure.

The hard limit is just that -- the maximum value a parameter can be set to.

It cannot be set to less than 500 milliseconds.

The Language attribute is optional, and can be set to the language used on the page.

Attribute must be set to a value larger than zero.

If the optional SECRET argument is not specified, the value of the stored secret will be set to NULL.

if a property cannot be set to constant value , the description provides this information.

The version property in the . eclipseextension file should be set to the version of Eclipse that's using this product extension.

This means the Indexed property for this field should be set to Yes (No Duplicates).

Therefore, the parameters related to logical record level conflicts must be set to 'false'.

By clicking OK the effect will be set to the highlighted parts of the audio file.

Settings of options that are not present in the new PPD will be lost and options only present in the new PPD will be set to default.

The policy must be set to Classic for remote debugging to work.

Objects or attributes relating to features in the new version will be set to default values that ensure minimal changes in behaviour.

If CHECK_POLICY is set to OFF, CHECK_EXPIRATION cannot be set to ON.

The contribution rate can be set to reflect this higher expected return.

The value of the attribute substitutionGroup must be set to "core: capability" .

The status of the service can be set to either Automatic or Manual.

Building Interceptors can be toggled to 'auto-build' or be set to manual build.

The ALLINDEXES attribute can be set to 'TRUE' to force the usage of all applicable relational and XML indexes, irrespective of cost.

GRUB can be set to automatically load a specified kernel after a user defined timeout.

If it is specified, the value should be set to false (which is the default anyway).

The command properties can be set to an SQL statement or to the name of a stored procedure if your data source supports stored procedures.

Return value which may be set to false if a catastrophic error is encountered which prevents release of the resource.

It can be set to modes where you see the pace instead of the total distance ran.

If not, it should be set to the IP of a valid WINS server.

In packages that use Script tasks or Script components, the PreCompile property must be set to True.

The isComplete flag will be set to false and a log message will be written in the Java Snippet step below.

Audible notifications can be set to the user's individual needs.

The rebuild option ONLINE must be set to OFF for secondary XML indexes.

The Sandbox can be set to deny network access, filesystem access, etc.

This key value must be set to enable the three types of logging: Interop, Loader, and Networking.

Startup can be set to Automatic or Manual during installation.

From this, the roller time of specific mining programs, can be set to more than 183 days according to production needs.

The repeat attribute of the animator tag can be set to determine how many times the animation cycles.

Road prices, by contrast, could be set to take into account all those four sorts of damage.

The calibration device shall be set to zero before calibration is started.

Must be set to server for the object to execute within ASP. NET.

If all of the row conditions should be met, the Satisfy drop list should be set to "Satisfy all of the following" .

InternationalNumberFormat is a single-valued attribute and can be set to only one value.

Instead, those resources will be set to an ACL for a local account.

This property should only be set to Yes when the primary project output is an ISAPI extension.

Thunderbird can't be set to automatically show a CC or BCC line in a new email you're composing.

They can be set to render in any order, at any place on the screen, or only certain parts of the screen.

Not all report items will support expressions that can be set to a constant.

This means, therefore, that our server certificate's CN should be set to localhost.

Welding current can be set to increase compensation.

It can be set to default to either the ToolTip (by entering =tt) or the long description (by entering =ld).