网站首页  词典首页

请输入您要查询的英文单词：

　

单词 crack growth
释义

crack growth

美 
英 
  • un.裂纹扩展；裂缝伸展；裂缝扩展
  • 网络裂纹增长；裂纹发展；裂纹成长

英汉

网络释义

un.
1.
裂纹扩展
2.
裂缝伸展
3.
裂缝扩展

例句

释义:
裂纹扩展,裂缝伸展,裂缝扩展,裂纹增长,裂纹发展,裂纹成长
1.
Fracture mechanics is adopted to estimate the fatigue life of structural members, and among the rest, crack growth rate formula is studied.
本文采用断裂力学方法来估算结构构件的疲劳寿命，这其中主要围绕裂纹扩展速率表达式展开研究。
www.fabiao.net
2.
The situation of crack growth for a real component , rubber pad used in turck, during fatigue testing were explained.
并用有限元分析结果解释了一个实际产品——卡车用橡胶垫在疲劳实验过程中裂纹扩展的情况。
www.chemyq.com
3.
The analytical investigation of nonlinear creep crack growth is in its infancy and much remains to be learned and done.
对于蠕变裂纹扩展的分析研究还是处于初期阶段，还有许多事情有待于认识和完成。
4.
Subcritical crack growth is one of the main causes of time-induced failure in rock engineering.
亚临界裂纹扩展是岩体工程破坏时间效应的原因之一。
lib.cqvip.com
5.
Both of these statements are based on the tacit assumption that the applied stress does not change during the crack growth process.
这些结论都建立在理想的假设上，即实用应用力在裂纹扩展过程中不变。
www.kuenglish.info
6.
The capability to predict the crack growth behavior of these high-temperature components is vital for both design and maintenance.
对这些高温部件上裂纹发展趋势的预测能力对设计和维护都是非常关键的。
wenwen.soso.com
7.
However, crack growth is rapid while loading is close to the peak strength, then specimen will be broken with shear or splitting mode.
当角度较大时，裂纹不易萌生，但在接近峰值强度时，扩展较快，并直接导致最后的剪切或劈裂破坏；
202.127.156.16
8.
Debonding is a main form of interfacial crack growth of fiber-reinforced composites.
脱粘是纤维增强复合材料界面裂纹扩展的主要表现形式。
www.dictall.com
9.
Therefore, advantageous store belt is the superposition belt for advantageous sedimentary facies belt and advantageous crack growth area.
因此，研究区有利的储集区带为有利的沉积相带与有利的裂缝发育区的叠合带。
lib.swpu.edu.cn
10.
The application of crack growth approach to the analysis of fatigue life in rubber components is reviewed.
文章回顾了裂纹生长方法在橡胶件疲劳寿命分析中的应用。
zhidao.baidu.com
1.
An investigation of the effects of mean and alternating stresses on short fatigue crack growth under uniaxial loading is reported.
本文报道单向加载下平均应力和交变应力对疲劳短裂纹生长的影响。
www.jukuu.com
2.
A typical method was presented for the prediction of multiple crack growth in stiffened panel under random fatigue load spectrum.
给出了典型的随机载荷谱下铝合金加筋板多裂纹扩展的预计方法。
stae.com.cn
3.
It considers the parameters that influence fatigue crack growth rate are random variables that obey some probabilistic function.
概率断裂力学从概率与统计的角度，将影响疲劳裂纹扩展速率的各参数看作随机变量。
www.fabiao.net
4.
The relation between crack growth behavior and the loading history within damage tolerant structures is briefly reviewed firstly.
简述了损伤容限结构中裂纹扩展行为与载荷历程的关系；
www.ceps.com.tw
5.
For closed crack, the smaller the friction coefficient of the crack edges is, the larger the crack growth angle is.
对于闭合裂纹，裂纹面摩擦系数越小，扩展角越大；
ytlx.whrsm.ac.cn
6.
The fatigue crack growth behaviour of engineering small cracks under elastoplastic condition is studied.
本文对在弹塑性条件下工程小裂纹的疲劳扩展规律进行了分析研究。
hkxb.buaa.edu.cn
7.
The scatter factor, reliability and standard deviation for fatigue crack growth and propagation in the test are discussed.
本文介绍了疲劳裂纹形成和扩展寿命的分散系数，以及可靠度和标准差的选取。
www.chemyq.com
8.
When the crack is small, the fatigue crack growth is obviously influenced by microstructure features and multiple phase boundaries.
在裂纹较小阶段，疲劳小裂纹的扩展受显微组织与多相界的影响。
www.chemyq.com
9.
A new elastic-plastic model for prediction of fatigue crack growth under variable amplitude loading is presented in this paper.
目前关于预测变幅载荷下裂纹扩展模型有几十种。
hkxb.buaa.edu.cn
10.
and the estimating formula of crack growth rate were given for both constant amplitude loading and high? low cycle complex loading.
得到了恒幅载荷和高低周复合载荷下球墨铸铁的裂纹扩展速率估算公式。
www.juyy.net
1.
Having excluded the effect of welding residual tresses on crack closure, fatigue crack growth rates of the welded join. . .
在排除焊接残余应力导致的裂纹闭合效应后，焊缝及热影响区疲劳裂纹扩展速率与基材相当。
www.chemyq.com
2.
Several widely used crack growth models taking the load cycle interaction into account are described.
例出了几种常用的考虑载荷交互作用的模型。
www.ceps.com.tw
3.
Applicable methods to assess the fatigue crack growth were established using three sets of testing data.
建立了用三组实测数据预测疲劳裂纹扩展尺寸的实用方法；
www.ilib.cn
4.
Many studies in the related area of stress corrosion or subcritical crack growth use simplified test systems.
许多有关应力腐蚀或亚临界裂纹发展领域的研究使用了简化的试验系统。
www.bing.com
5.
So XFEM is promising in modeling frictional contact problem and the crack growth of compression-shear mixed mode crack.
因此该方法在分析接触摩擦问题以及压剪裂纹的开裂扩展时有显著的优势。
www.ceps.com.tw
6.
The results show that the crack growth rate increases with the increase of stress ratio.
实验结果表明，随着应力比增加，裂纹扩展速率增加；
rjggy.net
7.
The crack growth orientations under simple tension was gained by finite element analysis.
通过有限元分析，得出了固体推进剂单向拉伸时裂纹扩展方向。
www.ceps.com.tw
8.
Particula emphasis has been devoted to the influence of load ratio and microstructure on behaviour of near-threshold fatigue crack growth.
着重分析了载荷比和显微结构对门坎值附近裂纹扩展行为的影响。
hkxb.buaa.edu.cn
9.
Crack growth is simulated with the improved extended finite element.
采用改进的扩展有限元模拟了裂纹扩展。
www.ceps.com.tw
10.
In the tie girder boxes crack growth was detected near the crack tip.
在系杆箱型梁中裂纹尖端附近检测到裂纹的扩展。
www.jukuu.com
1.
shape will exemplify leak before-break behavior, one should consider the effect of crack growth on the applied stresses.
在证实一个给定的袭纹形状将会发生裂前泄露情况时，我们应考虑裂纹扩展对外载的影响。
www.jukuu.com
2.
Experiment results show that. in the three medium, crack growth velocity is minimum in oil, crack growth velocity is maximum in water.
实验结果表明，三种介质中，裂纹在煤油中扩展速率最低，水中裂纹扩展速率最大。
www.chemyq.com
3.
Moreover, in the same circumstances the non-closed crack growth angle is larger than the closed crack growth angle.
并且在相同情况下，未闭合裂纹的扩展角要大于闭合裂纹的扩展角；
ytlx.whrsm.ac.cn
4.
The fatigue crack growth rate tests were conducted using compact tension specimens in accordance with ASTM E647.
疲劳裂纹扩展速率进行了测试采用紧凑的张力，依照ASTME647标本。
abems.com
5.
According to condition in motion for rotor of thermal power station, different holding are selected in crack growth testing.
根据火力发电厂转子运行工况，选择了不同保载时间，进行裂纹扩展试验。
joa.csee.org.cn
6.
Based on the study of the crack tip parameter in elastic plastic crack growth, further discussions on the high speed crack growth are given.
以弹塑性扩展裂纹的裂尖参数为研究对象，对快速扩展的裂纹问题进行了细致的分析。
www.dictall.com
7.
A criterion of crack growth at interaction of fatigue and creep is presented.
本文提出了疲劳-蠕变交互作用下的裂纹扩展判据。
joa.csee.org.cn
8.
The flaking do increases and undulates the fatigue crack growth rate.
钢中的白点能增加疲劳扩展速率并使扩展速率发生波动。
www.ceps.com.tw
9.
It is pointed out that the method can solve SIF for complex problem, but there is some dispersions for crack growth rate.
同时也指出这一方法可解决复杂问题应力强度因子的确定，但裂纹扩展速率存在一定的分散性。
www.ceps.com.tw
10.
Based on Pairs equation, the recursion relation of crack growth length has been deduced.
根据这一递推式，推导出数个循环载荷作用下裂纹扩展长度的近似算法。
hkxb.buaa.edu.cn
1.
For example, locking, large deformation problems accuracy losing, and crack growth problems.
锁死、大变形问题精确度降低及裂缝成长等问题。
ir.lib.ncu.edu.tw
2.
Sensitivity Analysis on Reliability for the Crack Growth Life of Powder Metallurgy Turbine Disk
粉末冶金涡轮盘裂纹扩展寿命可靠性敏度分析
www.ilib.cn
3.
Improvement of the Algorithms of Multiple Crack Growth and Its Object-Oriented Programming
改进的多裂纹扩展算法和程序设计
www.ilib.cn
4.
Experimental Research on the Fatigue Crack Growth Rate of Raw Material, Weld Seam and Heat-affected Zone of High Pressure Vessel
高压气瓶母材、焊缝和热影响区的疲劳裂纹扩展速率实验研究
www.ilib.cn
5.
Experimental analysis and finite element calculation of crack growth in a stiffened plate structure
加筋板结构止裂数值计算与实验研究
www.ilib.cn
6.
Study of Interfacial Crack Growth of Composite by Photoelastic Approach
复合材料界面断裂的光弹性研究
www.ilib.cn
7.
Finite Element Analysis of the Implication on Fatigue Crack Growth under Tension-Compressive Loading
拉压载荷对疲劳裂纹扩展影响的有限元分析
www.ilib.cn
8.
Viscoplastic Constitutive Relation and Viscoplastic Crack Growth Behavior of the Rigid PVC
硬聚氯乙烯的粘塑性本构模型与裂纹扩展行为
www.ilib.cn
9.
Engineering estimation method of low-cycle fatigue crack growth rate of the pressure vessel
压力容器低周疲劳裂纹扩展率的工程计算方法
www.ilib.cn
10.
Analysis of the fatigue crack growth life of the steam turbine rotor
船用汽轮机转子疲劳裂纹扩展寿命分析
service.ilib.cn
1.
Study of the Crack-tip Parameters of Elastic-plastic Crack Growth
弹塑性裂纹扩展的裂尖参数研究
www.ilib.cn
2.
Aerospace series - Metallic materials - Test methods - Measurement of fatigue crack growth rates
航空航天系列金属材料试验方法疲劳裂纹扩展速率测量
www.mapeng.net
3.
Stochastic Crack Growth Approach under Corrosive Environment for Durability Analysis
腐蚀环境下的随机耐久性分析方法
www.ilib.cn
4.
Stratified Model for Estimating Fatigue Crack Growth Rate of Metallic Materials
金属材料疲劳裂纹扩展速率估计的分层模型
www.ilib.cn
5.
Influence of Inclusions on Crack Growth Life of Powder Metallurgy
夹杂对粉末高温合金裂纹扩展寿命的影响
www.ilib.cn
6.
Boundary Element Numerical Simulation of Three-Dimensional Crack-Growth Trajectory
三维裂纹扩展轨迹的边界元数值模拟
www.ilib.cn
7.
Nonequilibrium Statistical Modeling of Fatigue Crack Growth Behaviour
疲劳裂纹扩展的非平衡统计模型
www.ilib.cn
8.
Relationship between crack growth and explosive spalling of high performance concrete subjected to fire
火灾高温下高性能混凝土的裂纹扩展与爆裂的关系
www.ilib.cn
9.
Gray Residual Difference Identification Prediction Method on Fatigue Crack Growth
疲劳裂纹的灰色残差预测
ilib.cn
10.
Application of mathematical model to the analysis of hydride-introduced steady-state crack growth in metals
氢化物诱致金属稳态裂纹扩展数学模型的应用
www.ilib.cn
1.
Prediction of Surface Fatigue Crack Growth Lives of Structures under Bending Loads at Elevated Temperature
高温受弯构件表面裂纹疲劳扩展寿命预测
service.ilib.cn
2.
Relationship Between Fatigue Crack Growth Behaviour and Microstructures in Co-Ni Ultra-high Strength Steel
Co-Ni超高强度钢的疲劳裂纹扩展行为与组织的关系
www.ilib.cn
3.
Fractographic Analysis of Ruptured Sucker Rod and Estimation of Its Residual Strength on Crack Growth Stage
抽油杆断口失效分析及裂纹扩展期剩余强度预测
www.ilib.cn
4.
Orthogonal Polynomial and Three Parameter Exponent Function Model to Treat Fatigue Crack Growth Curve
疲劳裂纹扩展曲线的正交多项式与三参数指数函数拟合法
www.ilib.cn
5.
Researches on the Fatigue Crack Growth of the Nozzle Weld Seams of Hydrogeneration Reactors
加氢反应器接管焊缝疲劳裂纹的扩展研究
www.ilib.cn
6.
Experimental research on fatigue crack growth for cross shaped welded joint with partial penetration
部分熔透十字焊接接头疲劳性能试验
service.ilib.cn
7.
Fatigue Crack Growth and Life Estimation of a Crude Oil Pipeline
石油输送管线的疲劳裂纹扩展与寿命预估
service.ilib.cn
8.
Application of Displacement Discontinuity Method on Simulation of Crack Growth
位移不连续法在裂纹扩展仿真中的应用
service.ilib.cn
9.
Metallic materials - Fatigue testing - Fatigue crack growth method
金属材料.疲劳试验.疲劳裂痕增长试验
www.mapeng.net
10.
Simulative Investigation of Fatigue Crack Growth for Steel-Concrete Interface
循环荷载作用下钢筋与混凝土界面裂纹扩展的模拟
www.ilib.cn
1.
Differential Equation Approximation of Fatigue Crack Growth Curve
疲劳裂纹扩展曲线的微分方程拟合法
www.ilib.cn
2.
The Fracture Criterion of the Maximum Size of Plastic Zone of Mixed Mode Crack Growth
复合型裂纹扩展的最大塑性区尺度准则
ilib.cn
3.
Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth Polyethylene Pipes and Resins
测量聚乙烯管和树脂抗裂纹缓慢增长的切口拉伸试验的试验方法
www.isres.com
4.
Fatigue Crack Growth Experiments and Model in Corrosive Environment for Aluminum Alloy
腐蚀条件下铝合金疲劳裂纹扩展试验及模型
168.160.184.78
5.
Testing for Measurement of Fatigue Crack Growth Rate of metal Materials
实验五、测定金属材料疲劳裂纹扩展速率
www.jpkc.cq.edu.cn
6.
Characteristics of fracture toughness and fatigue crack growth of steel pipeline
管线钢断裂和疲劳裂纹扩展特性研究
ilib.cn
7.
A Method for Estimating Fatigue Crack Growth Reliability Using Fatigue Crack Growth Data
使用疲劳裂纹扩展数据的疲劳裂纹扩展的可靠性分析方法
www.ilib.cn
8.
Effect of experimental parameters on small fatigue crack growth threshold in high-strength steel
试验参数对高强钢疲劳小裂纹门槛值测试的影响
www.ilib.cn
9.
Study on Fatigue Crack Growth Life Assessment of Aerospace Launcher Steel Structure
航天发射塔架钢结构件疲劳裂纹扩展寿命评估研究
www.ilib.cn
10.
Fatigue Crack Growth Rate of Rotor Steel under the Condition of Subcritical Temperature
亚临界温度条件下转子钢疲劳裂纹扩展速率
ilib.cn
1.
Subcritical Crack Growth and Influence of Biaxial Stress in Brittle Materials
脆性材料的亚临界裂纹扩展和双向应力的影响
www.ilib.cn
2.
Fatigue Damaged Crack Growth of Steel Structure Strengthened With FRP Patches
FRP补强疲劳损伤钢结构裂纹扩展研究
ilib.cn
3.
Low cycle fatigue crack growth rate of compacted graphite cast iron
蠕墨铸铁的低周疲劳裂纹扩展速率
service.ilib.cn
4.
A Small Sample Method for Testing Fatigue Crack Growth Rate Curve of Pressure Vessel Steel
用二维单侧容限系数公式测定压力容器钢疲劳裂纹扩展速率的小样本方法
www.ilib.cn
5.
Study on Laser Shock Processing to Decrease the Fatigue Crack Growth Rates of Aluminium Alloy
激光冲击处理降低铝合金裂纹扩展速率的研究
www.ilib.cn
6.
Rubber, vulcanized--Determination of crack growth
硫化橡胶裂口增长的测定
www.qiyeku.com
7.
Effect of welding residual stress on fatigue crack growth of the pressure vessel
焊接残余应力对压力容器疲劳裂纹扩展的影响
www.ilib.cn
8.
On partial gathering of hydrogen and crack growth in hydrogen embrittlement
氢脆中氢的偏聚和裂纹的扩展
www.ilib.cn
9.
Method for Determining Crack Growth Parameters Using Fatigue Life
疲劳裂纹扩展参数的寿命反推方法
service.ilib.cn
10.
Study on crack growth model for duration analysis in corrosive environment
腐蚀条件下结构耐久性分析裂纹扩展规律研究
www.ilib.cn
1.
Method for Determining Crack Growth Parameters Using Fatigue Life
疲劳裂纹扩展参数的寿命反推方法
service.ilib.cn
2.
A method for quickly determining crack growth curve of offshore steel platforms
确定海洋平台钢裂纹扩展曲线的快速方法
www.ilib.cn
3.
Study on crack growth model for duration analysis in corrosive environment
腐蚀条件下结构耐久性分析裂纹扩展规律研究
www.ilib.cn
4.
A New Method for Testing Crack Growth Curve of Mechanical Engineering Materials
机械工程材料裂纹扩展曲线测试新方法
www.ilib.cn
5.
Small Sample Method for Obtaining Surface Fatigue Crack Growth Curve
表面疲劳裂纹扩展性能曲线测试的小样本方法
scholar.ilib.cn
6.
Dual boundary element method of three-dimensional fatigue crack growth
三维疲劳裂纹扩展仿真的双重边界元法
www.ilib.cn
7.
Crack growth model and testing research of high strength steel under random load
高强度钢随机载荷下裂纹扩展模型
ilib.cn
8.
Numerical Simulation to Surface Fatigue Crack Growth
表面裂纹疲劳扩展的数值模拟
www.ilib.cn
9.
Research on fatigue crack growth of nozzle of hydrogenation reactor
加氢反应器接管裂纹的疲劳扩展分析
www.ilib.cn
10.
A modified constitutive relation for fatigue crack growth
一种改进的疲劳裂纹扩展表达式
www.ilib.cn
1.
A modified constitutive relation for fatigue crack growth
一种改进的疲劳裂纹扩展表达式
www.ilib.cn
2.
Determination of Fatigue Crack Growth Rate Using Existing Data
用现有疲劳试验数据确定疲劳裂纹扩展率
www.ilib.cn
3.
A Review for Methods of Determination of Fatigue Crack Growth Threshold
对确定疲劳裂纹扩展理论门槛值方法的评介
www.ilib.cn
4.
Standard Test Method for Measurement of Fatigue Crack Growth Rates
疲劳裂缝增大率测量用测试方法
www.soudoc.com
5.
Test Method for Rubber Deterioration - Crack Growth
测定橡胶龟裂扩展的试验方法
www.isres.com
6.
Numerical Detection of Crack Growth Process in Tire Structure
轮胎疲劳损伤过程的数值监测
www.ilib.cn
7.
Research on crack growth orientation of tire-rubber materials
轮胎橡胶材料裂纹开裂方向的研究
www.ilib.cn
8.
Standard Test Method for Measurement of Creep Crack Growth Rates in Metals
测量金属蠕变开裂增长速度的试验方法
www.soudoc.com
9.
Analysis of Fatigue Crack Growth in Concrete and the Anti-cracking Mechanism of Fiber
混凝土疲劳裂缝扩展及纤维阻裂机理的研究
www.ilib.cn
10.
Testing Research on Small Fatigue Crack Growth in Complex Phase Steel
复相钢的疲劳小裂纹扩展实验研究
www.ilib.cn
1.
Testing Research on Small Fatigue Crack Growth in Complex Phase Steel
复相钢的疲劳小裂纹扩展实验研究
www.ilib.cn
2.
Fatigue Crack Growth of Ship Structures Under Random Loading
随机载荷作用下平台结构疲劳寿命预测
www.ilib.cn
3.
Fractal Effects on Subcritical Crack Growth of Concrete
混凝土亚临界裂纹扩展的分形效应
www.ilib.cn
4.
Grey method of engineering prediction on fatigue crack growth
疲劳裂纹预测的灰方法
service.ilib.cn
5.
Effect of Anode Dissolution on Corrosive Fatigue Crack Growth
腐蚀疲劳裂纹扩展过程中裂尖阳极溶解的贡献
www.ilib.cn
6.
Test Method for Measurement of Fatigue Crack Growth Rates
疲劳裂缝增大率测量用试验方法
www.mapeng.net
7.
Study on subcritical crack growth and thresholds of rocks
岩石亚临界裂纹扩展试验及门槛值研究
www.ilib.cn
8.
Simulation and Analysis of Surface Crack Growth in Round Bars
圆柱形部件表面疲劳裂纹扩展仿真及分析
www.ilib.cn
9.
Effect of Soft Interphase On the Crack Growth in The Bimetallic Laminate
双金属层状板中软界面层对裂纹扩展的影响
service.ilib.cn
10.
Grey System Assessment Method of Fatigue Crack Growth
疲劳裂纹扩展的灰色系统预测
www.ilib.cn
1.
Grey System Assessment Method of Fatigue Crack Growth
疲劳裂纹扩展的灰色系统预测
www.ilib.cn
2.
Test method for fatigue crack growth rates of welded joints
焊接接頭疲勞裂紋擴展速率試驗方法
www.china-customs.com
3.
stress intensity factor for slow crack growth;
应力强度因子门槛值；
www.chemyq.com
4.
Simulation and Analysis of Corner Crack Growth
孔边角疲劳裂纹的扩展仿真及分析
www.ilib.cn
5.
Fatigue Crack Growth under Random Loading
随机载荷作用下的疲劳裂纹扩展
www.ilib.cn
6.
Creep Crack Growth Rate Measurement
高温蠕变裂纹扩展试验技术
httd.njuct.edu.cn
7.
Research on the crack growth path of high-speed shearing
高速剪切裂纹扩展方向的研究
ilib.cn
8.
New Cyclic J-Integral for Low-Cycle Fatigue Crack Growth
描述低周疲劳裂纹扩展速率的循环J积分新参量
www.ilib.cn
9.
Effect of Laser Alloying on the Fatigue Crack Growth Rate
激光合金化对疲劳裂纹扩展速率的影响
www.opticsjournal.net
10.
Test System of Low-Cycle Fatigue Crack Growth Rate
低周疲劳裂纹扩展速率的试验系统
www.ilib.cn
随便看

　

英汉双解词典包含2704715条英汉词条，基本涵盖了全部常用单词的翻译及用法，是英语学习的有利工具。

　

Copyright © 2004-2022 Newdu.com All Rights Reserved
更新时间：2025/2/5 23:58:54