| 单词 | deformation temperature |
| 释义 | 例句释义: 形变温度,变形温度 1. The resin toughness, the casting of the thermal deformation temperature is a good comprehensive performance winding resin. 该树脂韧性好，是一种综合性能良好的缠绕用树脂。 www.hongenupr.com 2. Deformation temperature and the deformation velocity will affect critical deformation, and thereby affect the dynamic recrystallization. 变形温度，变形速度等因素都会影响临界变形量，从而影响动态再结晶。 www.fabiao.net 3. The results showed that the flow stress and deformed microstructure were greatly affected by strain rate and deformation temperature. 结果表明：应变速率和变形温度对合金的流变应力与变形组织有显著影响。 www.rm-journal.com 4. Within a certain range, grain size becomes small as deformation temperature declines and strain rate rises. 在一定范围内，降低变形温度提高变形速度可使动态再结晶晶粒尺寸减小，随变形程度增大，晶粒变得细小。 www.ceps.com.tw 5. The results show that the flow stress decreases with the deformation temperature increasing and strain rate decreasing. 结果表明：合金的流变应力随着变形温度的升高和应变速率的降低而降低； www.rmme.ac.cn 6. decreasing deformation temperature, the kinetics of phase transformation was accelerated. 随着形变温度的降低，过冷度增加，相变动力学过程加快。 www.dictall.com 7. The evolution law of microstructure and properties of 7A04 alloy at different deformation temperature and times was studied. 研究了不同变形温度和变形次数下7A04铝合金组织与性能的变化规律。 rjggy.net 8. The results show that the softening ratio increases with the increase of deformation temperature and interval time. 结果表明，其静态软化率随变形温度的升高和道次间隔时间的延长而不断增加。 rjggy.net 9. The degree of crystallinity and thermal deformation temperature of plasticized PP were also increased. 增塑PP的结晶度和热变形温度也有所提高。 www.chemyq.com 10. When deformation temperature is constant, flow stress increases with the increase of strain rate. 当温度一定时，流变应力随着应变速率的升高而增大。 www.rjggy.net 1. When strain rate is constant, flow stress decreases with the increase of deformation temperature. 当应变速率一定时，流变应力随变形温度的升高而降低； www.rjggy.net 2. An increase in deformation temperature enhanced the above processes. 提高温度有利于上述复合过程的进行。 www.ceps.com.tw 3. The effect of deformation temperature and initial strain rate on the super plasticity of the alloy was observed. 考察了变形温度、初始应变速率对其影响，并测定其力学性能。 www.chemyq.com 4. Effect of strain rates on peak flow stress is relate to deformation temperature. 应变速率对峰值应力的影响与变形温度有关。 www.chemyq.com 5. The effect of the deformation temperature on flow stress is related to strain rate. 而变形温度对流动应力的影响程度与应变速率的大小有关。 www.ceps.com.tw 6. Calcite Twins as An Application of Analysis of Maximum Deformation Temperature 方解石双晶在最大变形温度分析中的应用 service.ilib.cn 7. Design of Vicat Soft Temperature and Hot Deformation Temperature PC 维卡软化点热变形温度微机控制系统的设计与实现 ilib.cn |
| 随便看 |
英汉双解词典包含2704715条英汉词条，基本涵盖了全部常用单词的翻译及用法，是英语学习的有利工具。