database name

To shut down Derby, however, this connection URL must be devoid of any reference to a database name.

However, if you do not specify a database name, Notification Services creates a new instance database with the name instanceNameNSMain.

The next screen prompts for the Drupal database name you created earlier, as well as a login and password to access the database.

Argument , then table names do not need to be qualified with a database name .

Note that this step is the same as the configuration step in the export section, except that the database name is ABCINS rather than ABCFIN.

STOP DATABASE clause The database-name is the name of a database (other than the current database) running on the current server.

Track the number of transactions per day grouped by database name, partition number, and timestamp to help with workload planning.

If a fully qualified table name, including a database name, is provided, the database name must be the name of the current database.

Type drupaldemo for the database name, then type the name and password of a user who has access to the database.

To see recovery history file, you can issue the following command, substituting your own database name for "sample"

The database name specifies the database to which a connection should be made.

In the Select or enter a database name list, select the name of the database that you want to use.

Remember, the Sybase database name where the stored procedure was located is part of the WebSphere Information Integrator server definition.

DATABASE: Name of the database that the 4GL function might have used.

Table_or_view_name must be delimited by single quotation marks and can be fully qualified by database name and schema name.

In this panel you can define the database name, size of the database and upload any supporting scheme file, as shown in Figure 19.

Enter the database name as well as the username and password for the database that you created in Step 3: Create Drupal's database.

SID field, enter the system identifier. The SID defaults to the database name and uniquely identifies the instance that runs the database.

All object references that do not specify a database name are assumed to refer to the current database.

However, in this code, the same location is handled by the setDatabaseName method as a part of a database name.

One can define server name, URL of that server, Database name, port No. , Login ID and Password.

Enter the appropriate details for the connection, including the instance type (DB2), database name (TPOX), and a valid user ID and password.

Change the database name and stored procedure name to reference the database and stored procedure that you want.

If you are working in project mode, you can change the database name for the next deployment of the project.

Specify the appropriate connection information, including the instance type (DB2), database name (TPOX), and a valid user ID and password.

Unable to roll back operation on database [database name]: all future database updates will be rejected.

For each primary database, the status and name of the current server instance (as the primary server), along with the primary database name.

After resolving any issues that you encounter, rerun the ALTER DATABASE database_name SET PARTNER statement on the principal server.

The file is consistent with the database and can be brought online without using RESTORE DATABASE database_name WITH RECOVERY.

In the Select or enter a database name box, select or type the name of the database, and then click OK.

The database_name must specify the name of an existing database.

In the example above, the database name required would be 'consoleDB', as shown in figure 20.

Then he enters the database name or selects one from the drop-down, if it is a local database, and clicks Next.

Unable to retrieve offline database name from offline system database.

In the New Database dialog box, in Database name, type the name of the new database.

To open a Code Editor window using a particular database, right-click the database name, and then click New Query.

The connection URL has three parts: a protocol (jdbc: cloudscape), a database name (SimpleDB), and an attribute (create=true).

The database name is the name you want to use to refer to your database.

If the column is an alias data type, this column is the database name in which the user-defined data type was created.

To do this, we prepend as_ at the beginning of the database name.

On the Database Setup page, in Database Name, select the database you created in step 5 of the previous set of the instructions.

You can specify the database name, database location, alias, comments, and whether you want automatic storage.

In the Connect to a database section, in the Select or enter a database name drop-down list, select AdventureWorks.

This second release of the plugin assumes only one database per project, and the database name is hardcoded as "database" .

In the SSL properties, verify that the location of the key repository matches your key database name and location.

Define the application database, specifying only a database name and schema name.

If the job is run by an alert, the database name value automatically replaces this token in the job step.

Indexes can be created on tables or views in another database by specifying a qualified database name.

When a temporary table name is specified, the database name must come before the temporary table name, unless the current database is.

The database name of the XML schema collection of a typed XML instance.

The two pieces of information you just added are now here on this screen: the user name and the database name.

when the agent is associated with a transaction , the process name shows its associated database name.

In previous versions, Notification Services always used the instance name to construct the instance database name.

Replace server_name with the appropriate server name and replace Mailbox_Database. Edb with the mailbox database name.

Is the database name used to return the corresponding database ID.

Specifies the database name to be deleted from the maintenance plan.

The database name must be specified with the keyword 'database'.

In ADO, specify the database name in the Initial Catalog property of an ADO connection object.

This includes the instance type (DB2), database name (TPOX), and a valid user ID and password.

To choose a different database file, type the database name into the text box or click the Browse button to locate one.

If database name or user changes, edit wp-config. php to have the correct values.

The four options shown here (database name, workload, connection type, and session name) are mandatory.

For Cloudscape datasources, enter values for Name, JNDI name, and database name, and accept default values for the remaining fields.

Again, please make sure you replace dbname with your database name and user1 with your username in all the listings.

For convenience, the database name can be stored in the DSN configuration.

ALTER DATABASE database_name SET PARTNER FAILOVER, where database_name is the mirrored database.

The connection string that includes the source database name, and other parameters needed to establish the initial connection.

Ensure that the logical database name is selected (in this example, MAR), and then click Properties.

When using DB_ID without specifying a database name, the compatibility level of the current database must be 90.

A server name or database name cannot be specified.

IMPORTANT: The database specified in the Database name field must already exist prior to connecting.

Parameter must be a valid database name.

This example specifies DB_ID as the first parameter without specifying a database name.

A client connects to the database using the connect statement specifying the database name and optionally the userid and password.

Note that the backup path must include the database name in the backup, not just the backup location.

Class with the specified column name, type, database name, owning schema, and object name.

A number of constants are defined for the database version, database name, and table name (see Listing 10).

Under Connect to a database, choose Select or enter a database name.

Create a new, blank project using specified database driver and database name and exit immediately.

Change the IP of the database, database name, username and password. Save and exit.

Connection string option that permits attaching databases at runtime and autogenerates database name.

It queries the system catalog to find the database name corresponding to DatabaseID.

Invalid database name. A non-empty string was expected. Enter a name using valid characters and try again.

To enable or disable a database for both types of replication, double-click the database name.

You can specify a database name in the instance configuration and each application definition.

Replication requires a persistent logical database name.

Ensure that you have provided the correct database host name, database port, and database name of the database that you are monitoring.

dj -- the Sybase database name where the stored procedure is defined.

This GUID remains the same after the database is restored or attached, even if the database name is changed.

Both scripts expect the database name and the database username and password as input parameters.

For example, it may be necessary to change the database name from Sales to SalesCopy to indicate that this is a copy of a database.

The summary includes the database name, its owner, total size allocated, total size used, dbspace name, and date created.

To access a mirrored database, a connection string must contain the database name.

Select DB2 as Database type and fill in the required Hostname, Port number, Database Name, Schema, Username, and Password.

If you specified a database name in the instance configuration, use that database name.

The system automatically suggests a default name based on the database name and the backup type.

If the database name you used is different from BPEDB, then appropriate changes need to be made.

Externalizing the database name makes it easier for a consumer to change it without hunting through our code.

In Notification Services, you can specify the instance database name.

For the sake of these examples, we will use the database name "RSS_AGG" (see Listing 6).

Enter the database host name, the port number, and the database name, and then click Test connection.

Under Select or enter a database name, type TestNorthwind, and click OK to close the Connection Properties dialog box.

Use your correct database name, user ID and password, hostname, and port number.

Adds a secondary database name to an existing primary database.

However, if you are changing the database name then you would specify the current name and the new name, separated by a comma.

Database name and owner name are optional in table name specification.

if name conflicts exist , you must resolve them manually on the destination server before you can use the source database name there.

Each database snapshot requires a unique database name.

On the "Stage" page, fill in the DB2 connection information: database name, username, and password.

The database name is different from the database name recorded in the backup set.

When no database_name is provided, the queue is created in the current database.

Is the database name in which the specified table or view resides.

Error during starting temporary connection using "%1" database name.

Select the Select or enter a database name button, and then enter Northwind.

In the Properties window, select the BannerText property and type Specify Database Name.

Ensure that the database name specified upon executing the tool exists in the STMM log file.

The database name at the peer that generated the response.

This field is disabled if the Database Name field is populated.

Specifying the database name and owner names is optional.

If database_name is omitted, the current database ID is returned.

You can provide translations for the database name and description for one or more languages.

You must specify the database name if you want to migrate tables from only one database on the remote server.

The database name must be specified using the -d option.

Cannot drop database - name not specified.

Enter the database name, user, and password values.

To choose a new database type the database name into the text box.

Depending on the source, you set options such as the authentication mode, server name, database name, and file format.

Under Select or enter a database name, enter Northwind.

The runsql command takes a database name, which we configured in the zero. config, and the script name.

Click on the Database Logon tab, and then fill in your database name, user id, and password.

If you use an existing database, you only need to define the database name and schema name.

Add the server name, database name, user ID, and password.

Is the database name in the instance registry correct?

Please note that our database name in this article is SECTION.

You can restore the database using the original database name, or you can specify a new database name.

Under the splog directory, create a directory with same name as your database name.

If a table name , owner, or database name is given, the list of columns is limited to only those that match .

In Select or enter a database name, choose Northwind.

You can specify the database name, schema name, filegroups, log files, default filegroup, and collation.

Select the Server and the Database where the job step will run, or type the server or database name.

The dialog box title will change to the database name.

The database name is extracted from the current URL.

The primary and standby database name for the HADR setup is jsbmain.

If NULL, the stored procedure constructs a file name using the database name.

In the Database list box, verify the database name.

Select Standard, fill in the Database name and Alias as MYDEDB, and click Finish.

The database name is shown as dbnameyou need to modify it to match your environment.

Now that we have the database name, table names, and column names we can put them together and pull information from them.

Catalog or database name of the table-valued function.

Server and database name are omitted.

The database name is not valid.

If an entry exists, we use the database name in that entry.

Note: The database name is docter. yygl, modified suffix.

If the database name is not changing then you only need to specify the current name (that is, you don't need to list a new name).

Property to the new database name.

Voice commands could not create a new database name.

You should see the database name that you added previously.

Certainly, any database configurations (for example, the database name, database user name, and password) should be configurable.

If there is not explicit USE database_name clause in the workload, you must use the -d argument.

Your C program must call this method, because it obtains the database name from the dbInfo DB2 structure to set the log file name.

Choose the database name, in our case DAISY_DB, and click OK.

Because the database name does not already exist, a new one is created by using the files in the backup.

In the Select or enter a database name list, enter a valid database on the server, such as Northwind.

Finally, install DB2 UDB, create an instance of the DB2 database (name it DB2).

On the Step 3 panel (Figure 21), enter JPATEST for the database name, then Next.

The database name that is explicitly supplied when you restore a database is used automatically as the new database name.

To change the database name, you must edit the properties of the project.

Typically, the database name is used.

Parameters such as database name and table name are null.

For example, the request in the Quick Start example includes no database name and no parameters.

In the list, you should see the database name you provided in step 3.

For example, if the instance name is News, the default instance database name is NewsNSMain.

If you supply only the SQL Server name, it is assumed the database name is ProjectServer.

In SQL Server, this contains the database name.

Type in the DB2 database name, host name where the target database resides, and listener port number for target data source.

Add "; create=true" to the database name in the databaseName data source custom property in the WebSphere admin console.

The database name is the only required parameter the others default to the following

b Validates the local database creation and connection with the given database name. This parameter is ignored in the following scenarios

This batch program takes the following parameters: Control Database Name, Hostname, Userid, Password

Example #5: Moving a database to a new machine (changing instance name, database path, and database name)

Screen cap: Create database wizard, with fields for database name, default path, alias, and comment

Enter in a database name of SAMPLE and the correct User Id and Password and click

FIX: Error Removing Log Shipping on Secondary Database When Database Name Has a Quote

Error Removing Log Shipping on Secondary Database When Database Name Has a Quote

Referencing the Database Name in Object Definitions

If database names are not specified, the default instance database name is

Otherwise, use the default instance database name, which is a concatenation of

And the default application database name is

To specify a database name that contains a space or single quotation mark, you must use the

Scroll down to the section where you can see the database name

To specify the database name

Before running the update script, the following job step script uses a job step token to print the appropriate database name