combustion chamber

This fan is used to blow up to 90% of the air around the outside of the compressor and combustion chamber.

and the crown part is provided with a piston top and a piston ring belt which form the lower wall of a combustion chamber.

A method and apparatus are provided for accurately metering a gaseous into a combustion chamber of an internal combustion engine.

The internal combustion engine is a heat engine in which the burning of a fuel occurs in a confined space called a combustion chamber.

For the simplified system was applied in a constant volume combustion chamber, the combustible mixture can be ignited at any situation.

A secondary combustion chamber is arranged above the combustion chamber and is provided with a secondary air inlet.

With your combustion chamber filled by cooler, oxygen-rich air, fuel burns at a more efficient mixture.

This article introduces a designing means of mold of the fibre winding solid rocket motor combustion chamber shell.

The combustion chamber is hot enough to completely vaporize the fuel, providing better combustion and reducing emissions.

Besides, the matching stress between the strut and the bottom of combustion chamber is also very important.

Those vortices happen to match the natural vibrating frequencies of the motor's combustion chamber, and that combination causes the shaking.

A jet engine has thousands of parts assembled into the few components that comprise the compressor, combustion chamber and turbine.

When the spark ignites the air-fuel mixture, a flame front spreads out across the combustion chamber to consume the mixture.

A type of engine that uses a centrifugal compressor to force air into a combustion chamber where it is sprayed with fuel.

PCV system will be a mixture of leaking into the crankcase leap into air intake system in the combustion chamber, then a second combustion.

The system that carries exhaust gasese from the combustion chamber to the rear of the car is called the exhaust system.

The remainder of the air-fuel charge in the combustion chamber can consist solely of fresh and residual gases, without unburned fuel.

The body of the double-layer stainless steel combustion chamber, so that operation of heater body to maintain normal temperature.

Combustion chamber deposits increase exhaust emissions. Oils must be formulated to reduce such deposits.

The swirl intensity retention concept is introduced to evaluate the new shape of combustion chamber and its flow characteristics.

Our first explosion used up the available oxygen in the combustion chamber and it needs to be refreshed.

The feasibility about lowering the interior and exterior temperatures of the double base propellant combustion chamber is discussed.

The spray can travel nearly eight inches, about 2000 times the length of the insect's combustion chamber.

FSI takes the TDI principal of directly injecting fuel into the combustion chamber at a very high pressure.

This air is guided and diffused by static blades to allow for easier ignition when it mixed with fuel and ignited in a combustion chamber.

All three of these terms refer to the shape of the engine's combustion chamber.

The gas-sampling valve needs only one millisecond to take a sample, before leaving the combustion chamber again.

A hydrogen engine 10 supplies hydrogen, oxygen, and an argon gas serving as a working to a combustion chamber 21 to combust the hydrogen.

When the pressure is high enough, a membrane at the other end of the combustion chamber opens, and the mist and liquid fires.

The combustion chamber and the bypass regulating system were used to adjust the exhaust temperature.

The result shows that gas velocity, temperature and pressure at the exit of the combustion chamber, regular distributions have low . . .

The result of study will be more beneficial to on-line control of temperature in combustion chamber of lead column in Shaoguan Smelter.

Also, the acceptable material temperatures of the encircling walls (6) surrounding the combustion chamber (12) must not be exceeded.

The service condition and superalloys for combustion chamber of gas-turbine engines have been introduced.

By preheating the combustion air, the amount of fuel gas required to maintain the combustion chamber outlet temperature decreases.

Remarkable difference between combustion simulation with and without combustion chamber's acoustic was presented.

Acoustic characteristic of combustion chamber greatly affects the pressure variation of combustion process.

The thermal test is also conducted, including test of temperature, pressure, concentration of CO at the exit of the combustion chamber.

A combustion chamber and its igniters, injectors, and other related apparatus in a jet engine or GAS turbine.

The structural parameters of injector, the structural parameters and swirl ratio of combustion chamber were modified and optimized.

Deposits, including oil-derived, accumulate in the combustion chamber, increasing the compression radio and creating hot spots.

Fuel only burns after it becomes a vapour, so these droplets pass through the combustion chamber without being burned.

Damage the internal seal of a spark plug allowing combustion chamber blow-by.

H2S gas supplied to the combustion chamber is fed into a burner nozzle.

Tubby combustion chamber had high ignition reliability and high combustion efficiency.

Dual-Mode combustion chamber , as the key component of the Scramjet, is the most difficult to design.

What would be the shape of the combustion chamber?

Calculates the nonlinear vibration transfer from the combustion chamber to the block surface.

The control unit regulates the fuel flow to the combustion chamber, during starting and normal operation.

Meanwhile, in the combustion chamber top blast door, ensure that set the safe operation of the boiler.

Hot oil alvarnish and carbon deposits may be drawn into the combustion chamber where it increases HC emission.

In the diesel combustion chamber to complete evaporation, a mixture of spontaneous combustion.

Direct fuel injection sprays the fuel into the combustion chamber ata much higher pressure.

Detonation is a secondary explosion that occurs in the combustion chamber after the spark jumps the sparkplug gap.

Given sufficient turbulence in the combustion chamber, detonation is unlikely to occur.

The combustion chamber has a center plug pent-roof combustion chamber with cross-flow intake and exhaust layout.

The mean flow fields in fore combustion chamber of solid rocket motors with grain regression were studied.

Oil dissolving and the fuel is good, prevent the sediment of combustion chamber from producing effectively.

These research will more benefited to on-line control of actual temperature in combustion chamber.

Particularly the following points need considering in the plan of the combustion chamber shape.

Excess heat from the combustion chamber is also a problem, often leaking to other components of the engine.

The geometry of the combustion chamber and the atomisation of the fuel play a decisive role here.

Regardless of the type of fuel delivery system, the goal is to have a 14. 7 to 1 air to fuel ratio in the combustion chamber as it burns.

A simulation method for fuel distribution and impinging in DID engine combustion chamber was proposed to realize 3-D visualization.

In order to further reduce hydrocarbon emission and fuel consumption, mixture distribution in combustion chamber should be improved.

Reducing combustion chamber diameter was propitious to reduce HC emissions under the same compress ratio.

In cars, air is required in the combustion chamber where fuel is burned to produce power.

The fuel control unit supplies and regulates the fuel to the combustion chamber.

The results: more carbon deposits in the combustion chamber and on the fuel injectors.

The method includes providing a furnace having a combustion chamber in which is combusted coal and oxygen.

Combustion chamber can be designed according to the types of wastes.

Note that both valves are closed during compression and combustion so that the combustion chamber is sealed.

The fuel is so precisely dosed and so accurately distributed in the combustion chamber that only minimal amounts of fuel are needed.

When the beetle needs protection, the chemicals flood the combustion chamber.

And uncorrected gasoline additives used would lead to heavy combustion chamber deposits.

In addition, the effects of the combustion chamber shape on flow and spray process were discussed.

This turns the steam back into water, which is then returned to the combustion chamber.

Fuel gushes into the combustion chamber .

A throttle valve (11) controls the amount of air admitted to the combustion chamber.

The combustion chamber exit gases should contain approximately 2. 5% oxygen on a dry basis.

to fill the combustion chamber at a high pressure.

Usually a gas cooler is used between the combustion chamber and hydrator .

The main cause is the engine wear and the combustion chamber caused by carbon.

The test shows that the diesel engine performance can get some improvement when the latter combustion chamber is used.

We inject a quantity of fuel in to the combustion chamber, ignite it and create a single explosion.

Ring tension is necessary only to "scrape" the oil to prevent it from entering the combustion chamber.

The springs (1) are intended to hold the end cap (12) tightly seated on the asbestos washer (11) so as to seal the combustion chamber (7).

It can't be the combustion chamber.

a blower installed in an air feeding line communicated with the combustion chamber;

Numerical Simulation of the Effects of Temperatures and Pressures on Mixture Formation in the Combustion Chamber of a Diesel Engine

pyrolyzing the dried low-rank coals input in a pyrolysis device by utilizing the hypoxic gas supplied by a second combustion chamber;

Feasibility Study of Two-Stage Combustion Technology on Flat Bell Cover-Shaped Combustion Chamber

The evaluation on the condition of combustion chamber by checking the liner scavenge port of ME

Effects of Combustion Chamber Parameters on Combustion and HC Emissions of a Small Diesel Engine at Sudden Load-up Operating Conditions

Study of Dynamic Thermoelastic Stresses within Components of Combustion Chamber for Internal Combustion Engine

Process Analysis and Experimental Study on out of Tolerance of Sealing Performance of Cylinder Head Combustion Chamber

Heat Transfer Augmentation of the Cooling of the Flame-Protective Shell in the Low-NOx Combustion Chamber for a Gas Turbine Power Unit

Effects of Combustion Chamber Shape of the Direct Injection Type Diesel Engine on the Air Current Movement and the Emission Characteristic

Finally, we need some means of igniting the mixture in the top of the cylinder, the part called the combustion chamber;

3D topography of the transition part of an airplane engine combustion chamber was detected by grating projected and data combination method;

The Design and Study of the Annular Combustion Chamber with Centrifugal Fuel Injection

The Temperature Oscillation and Alternating Thermal Stress in the Wall of Combustion Chamber of Diesel Engine

Exergy Analysis of the Combustion Chamber of a Biomass Integrated Gasification Combined Cycle (BIGCC)

Measurement of Thermal Boundary and Influence of Combustion Flame on Thermal Boundary of Combustion Chamber Wall in a Diesel Engine

an electronic proportional gas valve installed in a gas feeding line communicated with the combustion chamber;

Research on Two Dimensional Temperature-field Digital Distribution of Sudden Spread Combustion Chamber Circumfluence Section

Experimental Investigation of Combustion Characteristics With and Without Exhaust Gas Dilution in the Constant Volume Combustion Chamber

Calculation of the Spherical Flame Propagation in the Combustion Chamber of the Gasoline Engine Using a Geometric Modeling Method

FEM Mesh Dissection Rules of Instantaneous Heat Conduction Solution for the Combustion Chamber of Internal Combustion Engines

Geometric characteristic of DI diesel engine shallow reentrant combustion chamber and its effect on emissions

Mixture Preparation in a BUMP Combustion Chamber for the Purpose of Realization of HCCI Combustion

The unique big combustion chamber design, increased the chamber radiation heating area, reduced the boiler volume, reduced Nox discharging;

Effects of combustion chamber structure on combustion and flow of hybrid rocket motor

Numerical Study of Liquid Film Cooling in Combustion Chamber of Liquid Rocket Engine

The Influence of the Fold Smoke Wall's Shape at the Combustion Chamber's Outlet to the Initial Dust- density Emission

The Assemble Welding Process Research of the Gas Turbine Combustion Chamber with Gas Compressor Cylinder Proper

Exploring Suppression of Oscillating Combustion of HAP Tri-Component Propellant in Revolving Combustion Chamber

Oil fouling occurs when oil is allowed to enter the combustion chamber

A CFD Study of the Effect of Combustion Chamber Passage Configuration of Engine on the Current Motion

Investigation of Measurement and Analysis of the Internal Noise of Aeroengine Combustion Chamber

Numerical Simulation of in- Cylinder Flows in Various Working Parameters and Combustion Chamber Configurations

Analysis of Noise Spectrum and Identification of Acoustic Excitation Sources in Annular Combustion Chamber of Aeroengine

Combustion Chamber Simulation and Structure Optimization of Zinc Fractionating Tower in Shaoguan Smelter

Heat Transfer Simulation of Combustion Chamber Components Coupled System Under Transient Condition

Optimization of low-emission combustion system with reentrant combustion chamber for automotive diesel engine

The combustion apparatus includes a combustion chamber of a boiler;

Measurements of Sulfur compounds inside the Combustion chamber of a CFB

Combustion process in secondary combustion chamber of ducted rocket by high speed photography and digital image processing

Laser Shearing-Interferometry for Measurement of Temperature Field in Combustion Chamber of Gasoline Engine

Theoretical Study on Measurement of Cross Section Temperature Distribution in Combustion Chamber with CCD Camera

Design and Study of Nozzle of Firework Type Gas Generator Combustion Chamber

Three - Dimensional Numerical Simulation of the Process in Combustion Chamber of Swirl Chamber Diesel Engine

Calculation Investigation on Influence of Combustion Chamber Profile on Combustion Process

Experimental system and measurement technique for the micro-gas turbine combustion chamber

Evaluation for Configuration Characteristic of Reentrant Combustion Chamber on Heavy-duty DI Diesel Engine

The Influence on Diesel Engine Performance and Emissions with Thin Ceramic Thermal Barrier Coating on Combustion Chamber

Pressure High-frequency Oscillation in Combustion Chamber of Regenerative Liquid Propellant Gun

Calculation of the Smallest Volume for the Heater Combustion Chamber for Vehicles

Numerical simulation of combustion process in DI diesel with the secondary injection by combustion chamber wall

Application and related thoughts for composites of combustion chamber crust on large scale solid missile engine abroad

Studies on Combustion Chamber Improvement for Reducing Exhaust Emissions in Swirl Chamber Diesel Engines

Application of optical measurement for detecting particulate in the combustion chamber of diesel engines

Diesel Nozzle-the Determining Interface Between Injection System and Combustion Chamber

Effect of the Combustion Chamber Cylindrical Section Diameter on the Pulse-Jet Engine Performance

Numerical Simulation of Two-Phase Flow in SolidRocket Motor Combustion Chamber under Overload Regime

Device and calculation research for rolling combustion chamber cooling structure

The Effect of Combustion Chamber Shape on Thermal and Mechanical Loads of a Diesel Engine Piston

Numerical Calculation of The Three-Dimensional Wall Temperature of The Combustion Chamber Using Heat - flow Coupling Method

Calculation of Turbulent Flow in Combustion Chamber of Cylindrical Pit in Internal-Combustion Engine

Analysis of Compact Evaluation Parameter for Gasoline Engine Combustion Chamber

Adiabatic film cooling effectiveness downstream of primary jet in combustion chamber

Numerical Simulation for Transient Temperature in Combustion Chamber of Micro-rocket

Temperature Control for the Overhaul of Suspended Ceiling of Combustion Chamber in Coke Oven

Relationship Between Primary Air Factor and Negative Pressure in Combustion Chamber

Effect on Direct-injection Unit Pump Diesel's Preferment and Emission by Matching Intake Vortex, oil and combustion chamber

Research on evaporation mode of accumulated fuel in combustion chamber during diesel engine cold start

The reconstruction and temperature control of combustion chamber of directed fired dryer

Processing of the Complex Contour for the Inner Wall of Combustion Chamber

Photoelastic Analysis of Combustion Chamber of Solid Propellant Rocket Engine

Effect of Injector Improvement on Emissions from Diesel Engine with Spherical Combustion Chamber

Quasi-dimensional combustion model for engines of LPG-diesel dual fuels with swirl combustion chamber

Numerical Simulation of Combustion Chamber and Nozzle Flow in Classical Hybrid Rocket Motors

Research on temperature measurement in diesel engine combustion chamber

The New Way of Improving Fatigue and Crack Resistance of Piston Combustion Chamber

Influence upon Mixture Formation by Different Combustion Chamber in Diesel Engine

Compactness Analysis of Gasoline Engine Combustion Chamber by Surface to Surface Ratio

Analysis of Spray and Combustion Chamber Matching for D. I. Diesel Engine by Using AutoCAD Second Development Technique

light industry: industry and domestic boiler combustion chamber liner;

Application of SiC Ceramics to Manufacture of Spacecraft Combustion Chamber

Data Acquisition and Analysis in Testing for Combustion Chamber Using Single Injector

Analysis of design calculation methods of scramjet combustion chamber

Measurement error about temperature in combustion chamber of lead column in zinc refining

Influence of Combustion Chamber Geometry on In-cylinder Flow Field and Engine Performance

The Arch of the Chain Grate Stoker Boiler's Combustion Chamber for Fujian Anthracite

Structure Optimization of Shuttle Kiln Combustion Chamber

The Status and Development of the Numerical Simulations of an Areoengine Combustion Chamber

Research on the Factors Influencing Lube Oil Consumption in Combustion Chamber

Numerical Simulation on Intake Airflow in Combustion Chamber of Vehicle Fuel Heater

Design and Investigation of Reentrant Combustion Chamber for Small DI Diesel Engine

Investigation on the three-dimensional isothermal flow field in a swirl combustion chamber

Effects of Combustion Chamber and Nozzle on Homogeneous Mixture Formation

Analysis of Operating Process of Combustion Chamber at Different Calibre Ratio and Calibre-Depth Ratio

Studying on the Performance Effected by the Shape of Combustion Chamber

Specific calorific intensity of combustion chamber

Flow-field computation for turbofan engine combustion chamber

Development Of Pre-combustion Chamber with Gas Film Cooling Protection for Circulating Fluidized Bed Boiler Start up

Numerical Simulation on the Effect of Combustion Chamber Geometry on Diesel Engine Combustion Process

Investigation on the Spray's Distribution in Combustion Chamber of Small D. I. Diesel Engine

Measurement Method of Diesel Engine Piston Combustion Chamber Volume

Cause and Solving Method for no Combusting of Combustible Gas in the Second-combustion Chamber of Coke-binding Furnace

Technical measures on combustion of mixing coal in combustion chamber

Numerical Simulation of Air Flow in the Cylinder Affected by Combustion Chamber's Shape

Safety limits design system of heat protection for combustion chamber and nozzle of solid rocket motor

Numerical simulation of the three-dimensional flow in the micro-gas turbine combustion chamber

Cause and Prevention of Starting Hole Blockade in Combustion Chamber

Numerical Study on Spray Impingement in BUMP Combustion Chamber

Development of Computer Simulation of Heat Transfer for Components in Combustion Chamber

Numerical Simulation for the Fuel Jet and Inner Flowfield of Scramjet Combustion Chamber

Diagnosis about problem of heat conditions in combustion chamber of lead column in the zinc refining

Matching Performance of Combustion Chamber with D. I. Desiel Engine

Effect of Steam Injection on NOx and CO Formation in Pulverized Coal Combustion Chamber

Advances in Application of Ceramic-matrixed Composite on Floating Pit Combustion Chamber

Brick lining material for combustion chamber boiler plant

Expert System Design of Gasoline Engine TJ-Jet Combustion Chamber

Port linking combustion chamber of upper and lower cylinders

CVCC Constant Volume Combustion Chamber

Thermal intensity of combustion chamber

On Improvement of Dust Collector in Water Gas Combustion Chamber

The combustion chamber design of small DI-diesel engine for highland

The Repair Practice of Combustion Chamber of Alloy Iron Tunnel Kiln

3-D visualization; Combustion chamber; DI diesel engine; Injection fuel spray;

Effect of partition on ceramic burner and the flow process in the combustion chamber

Design of Combustion Chamber of Rotary Selenium Kiln

Application of Dynamic Characteristics of Gas in Combustion Chamber of RLPG

Effect of Offesting Combustion Chamber for Air Blast Diesel Engine to Side Pressure of Piston Skirt

The Effect of Combustion Chamber Shape on the Fast Mixture Combustion Process

Study on the Temperature Field of Engine Combustion Chamber in Spark Ignition Engines

Analysis and study mainly from the following considerations: (1) Effect of water jet on the combustion chamber temperature field;

area ratio of combustion chamber passage

Calibre ratio of combustion chamber

Air chamber type combustion chamber

Three Dimensional FEA for the Thermal Field of Combustion Chamber

Wholly corrugated furnace is used in combustion chamber