control algorithm

Simulated results show that this cascade control algorithm is rather strong in following up, adjustability and robustness.

The simulation of an industrial process with time delay shows that the control algorithm can improve the dynamic performance of the system.

The system is composted of a high accuracy thermocouple and a 8031 single chip computer while adaptive PID control algorithm is employed.

Secondly, a distributed model predictive control algorithm was proposed, and a model of the optimal control sequence was established.

As a simulation study, the new predictive control algorithm is applied to a non-linear distillation column system.

The system adopts non-proportion radial homing control algorithm with modified PID blind zone, and its control capability is great.

An improved repetitive control algorithm was developed to improve tracking accuracy for a linear servo unit in a numerical piston lathe.

It has revealed that the adaptive self-tuning control algorithm used in the control system is feasible and effective.

The structure and characteristic of the electronic throttle is introduced in this paper and a fuzzy control algorithm is presented.

A temperature follow control algorithm and its realization method in the heat-supply net are presented.

A prototype of control algorithm for traction control system was designed and a vehicle dynamic model of acceleration are established.

Thus, it has great and practical significance to development an intelligent control algorithm of beam-pump unit for the economy benefit.

Simulation results show that the iterative control algorithm is applied to stone weighing control system, can achieve the desired results.

The respiratory airflow signal in an inner loop of the control algorithm is monitored to detect an airway obstruction.

Conventional predictive control algorithm possesses good overall performance, but it needs to solve the complicated Diophantine equation.

The control algorithm that the controller can be used to achieve rapid , accuracy and stability.

Performance of Five 915-MHz Wind Profilers and an Associated Automated Quality Control Algorithm in an Operational Environment.

The system runs with both principal and subordinate CPUs to implement control detection and control algorithm.

A fast control algorithm, based on fuzzy control, can be used to shorten the heating time of domestic gas boilers.

The off-line simulation of APF(Active Power Filter) can validate only the control algorithm, but not the actual dynamic characteristics.

With the positive position feedback control algorithm, active control of the cantilever beam's first-order modal vibration is researched.

Through study of the recognition of fault data, a data quality control algorithm is put forward.

Stability condition of the proportional control algorithm is given for a fixed target.

The fuzzy control algorithm used at large error had been explained especially and simulated with MATLAB.

VMM actually has a memory load control algorithm, which can detect if the system is thrashing and actually tries to remedy the situation.

According to the system performance and control algorithm requirements the thesis calculates the parameter of IGBT, capacitors and reactor.

It mainly studies the optimization control algorithm, further improves the predictive control algorithm and programs for the sub-computer.

A self-optimization control algorithm of the minimum stator current is proposed with the single-variable optimization method.

The compound control algorithm combines the feed-forward and inferential control algorithm for controlling the speed of the guiding disc.

The stability loop uses the PI control algorithm, which can improve the system type and reduce the steady-state error.

Congestion Control Algorithm plays a very important role in maintaining the steady running of the Internet.

A control algorithm of the crossbar network is discussed, which may control the non-blocking interconnection between any input-output pair.

And introduce the motion control algorithm, including single axis zero positioning algorithm and multi-axis coordinated control algorithm.

furthermore , this section also studies the algorithm of fuzzy reasoning , putting forward the fuzzy interpolation control algorithm.

Based on varieties of the inertia matrix for a combined spacecraft after separation, this paper proposes a adaptive control algorithm.

Then, different factors affecting the LOS stabilization are analyzed, providing a foundation for the control algorithm.

A gradient-variation iteration learning control algorithm for one kind of nonlinear systems was discussed to improve the control quality.

The net lifetime and fault tolerance can be improved using appropriate topology control algorithm.

through simulation , a control model with controllers for hydraulic shovel is established and relevant control algorithm is developed.

In control algorithm, the intelligent controller which includes fuzzy controller and PID controller was designed in this dissertation.

And then a model predictive control algorithm is designed for the closed-loop system to obtain good dynamic qualities and robustness.

A control algorithm of increment-PID was adopted to build imitating system that used in front and rear differential independently.

Laser scanning control algorithm of Rapid Prototyping equipment was studied and the program of the motion control board was designed.

On this basis, the basic model of main - shaft - less concave printer and ADRC are combined to get a new control algorithm.

This paper studies the intelligent mechanical ventilation bed system and the intelligent control algorithm synchronized with breath.

The simulation shows that the new control algorithm has good performances with fast response, stability and robustness.

and a new adaptive fuzzy PID control algorithm of vehicle cruise control was suggested based on the traditional cruise fuzzy controller.

The problems of variable-universe fuzzy control algorithm and its convergence are studied in this paper.

An adaptive control algorithm was put forward aiming at two main problems existing in the system.

Besides, in combination of hardware circuit and control algorithm, this paper has designed the software for batching scale controller.

Finally, the simulation results indicate these optimal control algorithm's feasibility and better performance.

The entire control algorithm is implemented as a separate module within this interrupt routine.

According to the characteristic of the electric motor of the actuator, a simple and practical control algorithm is designed.

Such an algorithm divided the control algorithm into two parts: offline part and online part.

Thesis completed control algorithm, control software, control system hardware circuit design, debug and test.

This can improve the precision and mapping ability of neural networks, which will improve the performance of inner model control algorithm.

The MPEG-2 TM5, one of the present rate control algorithm in video compression, is frequently compared as a standard.

The software contains implementation of the interface modules and control algorithm.

Then on the basis of two platforms we give the hardware design of the "three-loop" control circuit and control algorithm flow.

An adaptive congestion control algorithm in code division multiple access (CDMA) systems from the aspect of reducing cost is proposed.

The paper introduced the Fuzzy-PID control algorithm into Bending creep control system, improved the control efficiency.

In the conventional PID control algorithm, the proportional, integral and derivative parts are implemented.

The study of advanced anti-skid control algorithm is of great significance.

A robust predictive control algorithm for polytopic uncertain systems with multiple state delays was proposed.

Using present feeding control algorithm, the problem of accumulative errors in the feeding procedure is not solved well.

The ability to program the on chip microcontroller will enable the auto manufacturer to embed the control algorithm inside the chip.

To decrease the computational complexity and improve the image quality, a novel rate control algorithm was proposed.

In the light of DSP digital control characteristics, a new SPLL control algorithm is proposed.

the compensation control algorithm can reduce the transmission error in NC mechanism effectively.

By experiment and analysis, the validity of image processing algorithm and control algorithm are verified.

The latter design of the converter system has used the carrier modulation PWM control algorithm.

Finally, we introduce the test environment of control algorithm, and give the corresponding test results.

An inferential control algorithm is also used to compensate the error caused by the soft measure method.

This Paper Presents an automatic control algorithm of fixed-point landing for spacecraft with first cosmic speed.

adopted fuzzy decoupling control algorithm for the strongly coupling.

The control method and control algorithm for homing and closing phases of space rendezvous are investigated.

The character of large time delay and inertia in annealing process has been optimized by PID parameter-adaptive fuzzy control algorithm.

To solve the problem of congestion in internet, a fuzzy sliding mode control algorithm is proposed for the queue management.

The intelligent PID control algorithm is taken, and compounding feed-forward control is introduced in the paper.

Then uses the fuzzy control algorithm for frequency control and compares with classical PID algorithm.

So In the effective use of Internet congestion control algorithm as a very valuable important issue.

This paper presents a multi-model frizzy-control algorithm for non-linear Group Decision Support System-GDSS.

A call admission control algorithm for multimedia low orbit satellite networks was proposed.

Based on the basic principle of FC -AE- 1553 network, a network structure model and a control algorithm of data transmission are proposed.

Snapshot Isolation is a concurrency control algorithm that was first described in the paper A Critique of ANSI SQL Isolation Levels.

A controller based on Fuzzy Gain-Scheduling Control Algorithm is designed by analyzing and modeling of the simulative connecting system.

To perfect output performance of the fuel cell, a fuzzy control algorithm is presented.

At the end of my thesis I designed the future researching target of GAF topology control algorithm.

Test results show that the deadbeat SVPWM control algorithm can effectively track the grid voltage and reference current.

After finishing the servo controller, this paper studies control algorithm of servo system.

Therefore, this paper designed an intelligent drainage system of gas for local fan, combining the fuzzy control algorithm.

Therefore, a multimode control algorithm is implemented to overcome this problem.

This paper presents a model predictive control algorithm for affine nonlinear systems.

The double close loop framework is applied in the PFC control circuit and the PI algorithm is adopted as system's control algorithm.

The electronic shutter's control circuit schematic diagram and control algorithm is given.

The digital control algorithm in the closed-loop control was designed, and the dynamic simulation was conducted.

It presents the basic principle of aurostainer, describes the flow and realization of the control algorithm.

The velocity-rate-controlled and pressure-bias-modulated (PBM) control algorithm with balance compensation is used in this system.

The paper analyzes the control algorithm of PI, external characteristic of power source and the feeding speed.

Finally, we develop an OPNET process model for leaky bucket congestion control algorithm.

Furthermore, an incremental rate control algorithm is proposed.

Software, including PID control algorithm, level control.

A cascade control algorithm was designed. The speed regulation experiment is taken under the hardware-in-loop simulation system.

A water temperature control system for applications of magnetostrictive material is introduced, based on the logic rule control algorithm.

Finally, this paper studies the fuzzy control algorithm of the AGV control.

A nonlinear model predictive control algorithm based on parallel support vector machines for multivariable systems is presented.

Then, the position location property of metal seal cylinder has been researched by PID control algorithm.

Based on the quadratic form indicators of the single neuron learning algorithm for adaptive control algorithm, can refer to!

The motion control system's hardware architecture is showed in detail, and the control algorithm is also analyzed and designed.

The whole data transmission process of FC -AE- 1553 network is controlled by the proposed control algorithm of data transmission.

PI control algorithm based on regulator output saturation is designed, which achieves control over saturation withdraw point of system.

The traditional TCP congestion control algorithm has a poor performance in high bandwidth-delay product(HBDP) and wireless link.

That composed of Butterworth digital filter and PID control algorithm On the basis of WinAC, the data process and control is realized.

In addition, the fuzzy PID control algorithm appling to the speed control of the model machine is proved effective.

Fuzzy control algorithm is programmed by Borland C , control of inverted pendulum hardware system is realized.

ROI based overall quality optimized rate control algorithm is proposed.

The proposed stability control algorithm based on the vehicle state feedback improves effectively the vehicle stability.

On this basis, the temperature control system for this type stack is designed, and the fuzzy-PID fusion control algorithm is used.

But, the situation has been better in recent years, especially in model building, control algorithm and their application.

The optimal adaptive algorithm has origirally been proposed for the control algorithm.

Second, based on task hierarchy and NR control equation for SR, motion control algorithm with minimum attitude disturbance be developed.

This paper also analysis the control algorithm and the vary circumstance of PID parameter .

The control algorithm has not only the quickness and fuzzy control system and control system of PI.

In order to perform time-variety successive trajectory tracking, the PD control algorithm was applied to control the servo motor.

then the design of control algorithm is accord with software design on the soft tools.

How to improve the control algorithm further and achieve practical application of the theory will be the focus in the further work.

K-connected cluster topology control algorithm is proposed in this paper.

Discrete optimal control algorithm can be designed based on the augmented state sys.

This paper introduces the main structure of system, principle, PWM constant current charge and SPWM inverter control Algorithm.

This paper presents a fuzzy decoupling control algorithm.

A stability control algorithm was proposed to correct the steering angle dynamically based on the vehicle state feedback.

Based on the support vector machine method, a motion control algorithm for the spherical robot is introduced.

A robust adaptive control algorithm for time-varying discrete systems based on indirect pole-zero placement was proposed.

From the perspective of end system control, a nominal receiving rate based on congestion control algorithm(NBCC) is proposed.

and position brake use BangBang control algorithm to ensure the rapidity of brake and accuracy of position.

As far as SRTDBS, the concurrency control algorithm in transaction management should meet the security and timeliness.

PID control algorithm was researched and analyzed.

The simulation result indicated proposed the control algorithm has the good rapidity and the stability.

To solve the aforementioned problems, this thesis proposed a rate-control algorithm based on motion-detection.

By simulation, the autbor illustrates the superiority of PID control algorithm.

In this thesis, we illustrate the media access control algorithm in CRN.

All in all, NN PID control algorithm is very meaningful refer to the inter-satellite laser communication.

A shock isolation control algorithm of multi-degree of freedom system is presented based on the model of magnetorheological (MR) damper.

In this thesis, a new rate control Algorithm based on novel coding complexity metric and the relative improvement scheme is discussed.

The fair access control algorithm, which shares the access time based on special policies for each host is proposed.

At last, the Fault Control Algorithm is analyzed by emulator.

The access control algorithm is used to conduct XML document protection according to the security rules.

A control algorithm in 5-axis simultaneous feed was presented to cut and grind the stone sculpture.

The proposed system uses PI control algorithm to improvement rising time and eliminate steady state error.

It also make simple introduction to shape code under really low bit rates and realization of MPEG-4 code rate control algorithm.

Based on real-time transmission, a novel delay control algorithm about jitter in terminal is put forward.

For the lack of rate control model in H. 264, a new macro-block layer rate control algorithm for H. 264 is proposed.

Water temperature control system based on logic rule control algorithm is designed.

The technology of BP neural network was applied to the predictive control algorithm which was studied.

A simple stable direct adaptive PID control algorithm is proposed, which is based on RBF neural network.

So, we should study the effect of the above factors on the remote control, and find new control algorithm and the compensation measures.

This AAS platform can boost the development of advanced control algorithm and offer a friendly simulated condition.

This paper adopts the method, which is based on SQL database file, to realize the control algorithm parameters modify on-line.

In the chapter 4, VSC control algorithm based on the direct intervention yaw moment by active braking is proposed.

Can weave the all kinds of control algorithm program , accomplish closed cycle under the control of as industrial control computer , PLC.

Inner model control is a new control algorithm which is designed based on the math model of the process.

A fast rate control algorithm based on Steepest-Descent (SD) was proposed for JPEG2000.

This paper mainly presents the study on related control algorithm of electrical actuator control system based on DSP chip.

This control algorithm is a good theoretical to study the Brushless Double-Fed Machine in the practical application.

Fuzzy control, one intelligent control algorithm, can not only use specialist knowledge, but also learn new knowledge from data.

Research on Control Algorithm about Two-Axes Rotary Table Used for a Direction Designation

DSP-Based Implementation of an Improved Control Algorithm of a Three-Phase Active Filter for Compensation of Unbalanced Non-Linear Loads

Design and realization of a temperature follow control algorithm in the heat-supply net

A Distributed Topology Control Algorithm for Self-Maintenance of the Minimum-Energy Property of a Wireless Networks Topology

Improved Generalized Predictive Control Algorithm with Offline and Online Identification and Its Application to Fixed Bed Reactor

Bidirectional acceleration airbag control algorithm and its anti-road agitation characteristics

An Optimal Control Algorithm of a Gravity Gradient Stabilized Small Satellite with Momentum Wheel and Magnetic Torque

The Simulation and Research of a Predictive Control Algorithm Applied to the Process Control

Dynamic Matrix Control Algorithm with Stochastic Time-varying Parameters and Its Application in Temperature Plant of Hot-water Networks

Study of the minimum-energy path-preserving topology control algorithm for wireless Ad Hoc networks

Application of a Modified Neural Network Control Algorithm in Electrohydraulic Servo System

Research and Simulation for a Feedforward Generalized Predictive Control Algorithm

Improvement of the Control Algorithm of a Servo-System for Background Projection System

Variable Structure Fuzzy Adaptive Robust Control Algorithm for a Class of Uncertain Nonlinear Systems

Application Research on PID Series Control Algorithm with Generalized Forecasting Compensation-Autocorrection

Variable Structure Adaptive Robust Control Algorithm for a Class of Uncertain Nonlinear Systems

Iterative Learning Control Algorithm and Its Convergence for Process Control in Engineering Modeling

The Control Algorithm of AC Excited Grid Frequency Induction Machine Drive System and Its Main Circuitry Designing Research

Control algorithm of DC voltage for a hybrid active filter applied to high voltage system

Output feedback robust control algorithm applied to ship steering autopilot with uncertain nonlinear system

The Simulation Study of a SAM Based Fuzzy Control Algorithm

Single Step Interpolation Control Algorithm and its Improvement for the Thread Machining on CNC System

The Mathematical Model of Temperature of the Decomposing Furnace and its Control Algorithm

Simulation Research of Constrained Implicit Generalized Predictive Control Algorithm with Constrained Input

Self-organized Predictive Adaptive Control Algorithm for Thermal Compensated Frequency Stabilization

Intelligent control algorithm and its application in structural vibration control

Variable structure robust control algorithm for a class of time-varying uncertain systems

Study of generalized predictive control algorithm and simulation with the MIMO

The application of a reduction-robust control algorithm to diesel engine speed control system

Simple Adaptive Control Algorithm with Quadratic Performance and Its Application

Multi-strategy based fuzzy control algorithm and its optimization for isolated intersection

A Generalized Predictive Control Algorithm Taking Full Advantage of Predictive Information

Investigation of Ignition Control Algorithm of the Pulse Vector Motors of the Endoatmospheric Kinetic Interceptor

Revised Fuzzy Control Algorithm Used in Computational Fluid Dynamic Simulation

Research of the Adaptive Analytic Fuzzy Control Algorithm Applied to Automatic Drive

A TCP-Friendly Congestion Control Algorithm and Its Application in Multimedia Data Transmission

Application of a Novel Fuzzy Control Algorithm in Water Temperature Control System

Study of Electromagnetic Disturbance Turntable Measurement System Based on a New Predictive Control Algorithm

Multi-Parameter and Time-Section Control Algorithm Applying in Dynamic Resistance Controlled Spot Welding Monitored Control Systems

Optimal Acceleration Control Algorithm for High Speed Laser Sculpture and its Application

A Reverse Variable Gain PID Control Algorithm and its Application to the Earth Pressure Balance Simulation System

The Study of the Generalized Predictive Control Algorithm with the MIMO and Its Applications

PID Control Algorithm Programming and Its Parameter Tuning of Vacuum Modulation Valve on Strip Casting of NanocrystallineAlloys

Position control algorithm study of Permanent magnet linear motor servo unit;

Study of Privilege Control Algorithm on Grouping in MIS for Law Execution in Police Department

Robust Stability Conditions for Predictive Functional Control Algorithm of SISO Integrating Processes

The Realization of an Intelligent Control Algorithm in Intelligent Instrument

Application of a Modified Repetitive Control Algorithm for Digital UPS

Stability of Constrained Generalized Predictive Control Algorithm with Constrained Input

Decoupling control algorithm for a class of distributed parameter system

A Study of the Control Algorithm of the Dual-cylinder Synchronous Motion

Direct multivariable grey generalized predictive control algorithm and simulation

Cellular Automatic Control Algorithm-Based Anisotropic Silicon Wet Etching Physical Simulation

Research on the Control Algorithm of DC Voltage for Active Filter with a Three-level NPC Inverter

Application on fuzzy control algorithm in an opto-electronic tracking servo system

Modified Control Algorithm for the Hybrid Active Power Filter Applied to High Voltage Grid

Discrete-time Sliding Mode Predictive Control Algorithm and Its Application

Application of Intellective Predictive Control Algorithm in Control Systems of Coal Gasification Reactors

Analysis of Monitoring Signal and Control Algorithm for Optical Polarization Mode Dispersion Compensation

A Rate-Based Multicast Congestion Control Algorithm and Its Performance Analysis

Modeling and simulation on a direct torque control algorithm with low ripple for permanent magnet synchronous motors

Intelligent Control Algorithm of Cloud models and Simulation Research of Superheated Steam Temperature Control

adopted model reference fuzzy adaptive control algorithm for the time vary characteristic;

Predictive control algorithm in dynamic weighting of multilevel feeding pulverized material system

An Electrohydraulic Velocity Servo System Using Pseudo-derivative Feedback Control Algorithm

Research and Simulation of a Congestion Control Algorithm in ATM Network

Variable Structure Robust Control Algorithm for Uncertain System with the Absence of Matching Assumptions

In terms of software design: Using the traditional PID control algorithm to adjust wire feed speed;

Predictive Control Algorithm of State Variable Multi-time-delay and Its Application

Continuous-time Generalized Predictive Weighted Control Algorithm for Non-minimum Phase Processes

Simulation Research on Soft Starting of Asynchronous Motor at Constant Current Based on an Adaptive Single Neuron PID Control Algorithm

Hybrid Simulation Research of Implicit Generalized Predictive Self-Tuning Control Algorithm

Control algorithm and strategy for hydraulic driving system in an asphalt paver

Cell cascaded multi-level high voltage inverter is studied in detail include of rectification, topology and PWM control algorithm;

Improved semi-active control algorithm and simulation analysis for vibration reduction of structures using MR dampers

Feasibility of Generalized Predictive Control Algorithm with Constrained Input

Thirdly, explain the predictive control algorithm is used to the decoupling control, and present linear trajectory planning;

Control Algorithm with Fault Detection and Fault Tolerant for a Non-Linear System

A Fuzzy Control Algorithm and Its Application to Main Steam Temperature Control System

Improvement and Analysis of Unidentification Adaptive Control Algorithm

Concurrency Control Algorithm for Centralized Realtime CSCW Environment

A study of fairness of ABR congestion control algorithm under non-max-min criterion

Application of A New Kind of PID Control Algorithm in DC Motor Tracking System

Li Xinyang. Optimization of Model Reconstruction Algorithm and Control Algorithm in Adaptive Optics System

Distributed Control System and Control Algorithm of the Pressure in the Carbonization Furnace