coating thickness

if the required coating thickness has not been achieved , it should be touched up with airless spray or with brush or roller.

The results show that the near infrared properties of the coating have relationship with the coating thickness, powder percentage.

Deposition continues until the coating thickness becomes sufficient to form a barrier against further paint attraction.

The factors of the dulling efficiency was studied from pore volume, particle size, surface finishing, dry coating thickness.

Further increase in the PMMA coating thickness adversely reduces the tensile strength of the composites.

Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.

Micrograph technology was used to measure film coating thickness.

Coating thickness of the coating should conform to the standard design or construction requirements.

Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution.

Surface layer numbers, each coating thickness, surface coating and substrate Composition test respectively etc.

The grain size of Pd is increased with increasing current density or bath temperature, but is slightly affected by coating thickness.

The influence of coating thickness upon the fatigue strength will decrease along with the increase of cycling times.

Coating thickness measurement control depends on the speed of the gap and roller.

Leather - Physical and mechanical tests - Determination of surface coating thickness.

The deposition rate and coating thickness were determined, and the effects were compared with those of electroplating.

Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method.

Metallic and oxide coatings. Measurement of coating thickness. Microscopical method.

Measurement of coating thickness in the proof-test of IC packages and metal cases using X-Ray Fluorescence (XRF) spectrometry is described.

The effect of electrolyte temperature on the sparking voltage, coating thickness, and ceramic coating surface morphology was investigated.

With the increase of heat flow density, the influence of coating thickness on the interior temperature of tool is enhanced.

Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method.

Peripherin-coating quality including coating thickness.

Metallic coatings. Test methods for electrodeposited silver and silver alloys coatings. Part 1 : determination of coating thickness.

In the production of film thickness measurements you can use the advanced coating thickness, you can use simple and practical measure.

In the course of color coating steel plate production, coating thickness directly effects product cost and quality.

If by hand coating technology is impossible in this size of wire online guarantee an even coating thickness.

Metallic coatings. Measurement of coating thickness. Profilometric method.

This coating has sturdier edges due to the lower coating thickness.

PMMA coating thickness has less significant effect on the izod impact strength of the composites than CaCO3 volume fraction.

The coated lens manufactured with the method is provided with even coating thickness.

another bath in the PH value (methyl - acid content) also affect the coating thickness and the apparent quality.

the varnish coating thickness should be unanimous.

Uniform coating thickness is ensured by robot controlled HVOF spraying.

construction technology according to the design of coating thickness and the construction condition, adjust.

Advanced technical ceramics - Methods of test for ceramic coatings - Part 1 : determination of coating thickness by contact probe filometer.

Reducing plating time and coating thickness can solve these problems. So these methods can solve quality problem of the bubbling and. . .

Wet film thickness gauges may be used during coating to ensure correct coating thickness.

Refractory test coatings choice points of two kinds of domestic and abroad, coating thickness choices are also different.

It is special release when coating thickness don't conform with drawing as following.

it should be uniform coating thickness.

Adhesive coating thickness is too small, the amount is too thin, the adhesive film is, easy to come off.

Second, the electrolysis-photoptic, centrfugal, coating thickness at 2%.

Coil coated metals - Test methods - Part 1 : coating thickness.

Weight will constraint coating thickness, for large areas, to as little as ~1 mm.

The back of the coating thickness according to need.

For 3, that is, an online measuring roll coating, the coating thickness can refer to the following data to calculate.

surfactant reduces the surface tension on and enhance its leveling, uniformity favour of coating thickness;

Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section

Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by the crater grinding method

Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method

Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by the cap grinding method

Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods

Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by contact probe profilometer

Principles of coating thickness measurement; selection criteria and basic measurement procedures

Difference of Determination between Metal Alloy and Electroplated Coating Thickness by Direct Reading Spectrometry

Cyclophosphamide calendering resin (Polish high viscosity oil), coating thickness;

Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods

The Photoelectric Measurement Method of White Latex Coating Thickness and Its Implement

Measurement of coating thickness; non contact measurement of coating thickness on continuously moving objects

appropriately increased on appropriate coating thickness;

The measurement of coating thickness of electrodeposited nickel coatings on magnetic and non-magnetic subtracts

non - conductive coatings on non - magnetic basis metals - measurement of coating thickness - eddy current

Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods

Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods

Comparison of Two Measurement Method for Coating Thickness

Measurement of coating thickness; Wedge cut method for measuring the thickness of paints and related coatings

Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by contact probe filometer

Metallic coatings; Test methods for electrodeposited silver and silver alloy coatings; Part 1 : Determination of coating thickness

A Study on Coulometric-Weighting Test Method for Metallic Coating Thickness Determination

Effect of Current Distribution on Coating Thickness of Acidic Copper Plating Cylindrical Articles

fluorescence automatic coating thickness gauge

Performance and Application of Coating Thickness Gauge by Magnetic Method and Eddy Current Method

Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

Test Procedure for Metallic Coating Thickness Measurements of Contacts

Evolvement model of photoresist spin coating thickness on spherical surface

Error analysis and coating thickness control method for the narrow band DWDM filter

Casing gradienter Coating thickness Measurer

Online Measurement of Coating Thickness of Absorbing Material

Methods for measuring coating thickness by non-destructive testing

Design of the Measuring System for Coating Thickness in Portable

Film coating thickness of Compound Danshen Dropping Pills by NIRS fast detecting

Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

Test method of plating and coating thickness by beta backscattering for printed boards

Present Status and Prospect of Magnetic-Type Coating Thickness Tester

Coil coated metals - Test methods - Coating thickness

Control on Coating Thickness in Color Coating Steel Plate Production

Coating thickness to be control

And aim at increasing the calendering resin coating thickness;

Application of XRF to Coating Thickness Measurement of Metal Cases

Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

select solid high adhesive coating thickness;

A Thin Film Filter with Variable Coating Thickness Along Surface

minimum coating thickness on measuring part

Effect of Coating Thickness and DMF Content on the Properties of Fabrics

Test Method for Coating Thickness by X-Ray Fluorescence

Coating thickness On measuring part

Relation Between Coating Thickness and Carbon Content and Holding Time in Carbon Steel's Mixed Salt Bath Vanadinizing

Coating Thickness of PCB Board

X-ray tin coating thickness gauge X

An Investigation for Coating Thickness Uniformity and Technology of Ellipsoidal Mirror