coating

He was trying to make safe surface coatings for food containers using chemicals less hazardous than those found in household cleaners.

The surface texture of the coatings also turned out to be important.

As a new technique for changing the surface properties, laser cladding shows the unique advantages for producing HA bioceramic coatings.

SEM observation suggested that the wear mechanism of FEP coatings appeared to be obvious fatigue wear at relatively high temperatures.

Coatings have been used to a limited extent, primarily in specialized applications, such as the plungers in reciprocating pumps.

Wood Coatings can also be used for children's toys on the surface, the new product is environmentally friendly, absolutely pollution-free.

Infrared radiative coatings have been used in more and more fields in industry due to its energy saving effect.

Human Osteosarcoma MG63 cells have been used to investigate the bioactivity of HA coatings.

Titanium dioxide pigment (TiO2) is a fine, white powder used in coatings, cosmetic & personal care industry for whiteness and opacity.

The surface qualities and adhesion of the coatings obtained with several common acids and coordinating agents were compared.

It has primarily been used in paints, coatings and batteries.

Coatings for toys: any liquid or solid paint can be applied on the surface layer of toys to form a coating.

Aluminum and water-based aluminum insulation coatings did not achieve the thermal insulation performance.

Melamine is a chemical that is usually used for coatings, laminates, adhesives, and other industrial applications.

Moreover, the surface roughness of MAO coatings has a clear influence on the roughness of the electrophoresis film.

In the textile industry, cenosphere used for thermal insulation coatings and optical reflective fabric development, obviously.

The coatings did not affect the ability of the cells to produce insulin, the researchers add.

Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances.

The equation to residual stress within the surface coatings on the remanufactured components was perfected.

This paper has analyzed the surface and cross-section morphology and the phase composition of the ceramic coatings by using SEM, XRD.

Used for bottom paint in ship manufacture, coatings, dyestuff, metallurgy, chemicals and pharmaceuticals.

Thirdly, the surface hardness of the laser cladding coatings are much higher than the plasma spray welding coatings.

Sol-gel hydrophobic protective coatings have been widely used due to its easy preparation and excellent properties.

This article has described the surface characteristics of flexible graphite and the requirement for its coatings.

The surface appearance and corrosion products of Zn-Mg alloy coatings with different content of Mg were analyzed by SEM and XRD.

from crude petroleum; used for candles and for preservative or waterproof coatings.

Thin organic coatings commonly are used for insulating microelectrodes and electronic packages designed for implant applications.

The composite coatings, with the above-mentioned properties, are one of direction of wear-resistant coatings.

Chemical conversion coatings have been developed rapidly as a simple, effective face-treatment of corrosion protection.

The coulometric method can only be used if the phosphorus or boron contents of these coatings are within certain limits.

Of the drug Chemicals (Wuxi) products mainly used for PCB inks, UV-curable coatings and UV-curable Varnish.

Ics building technologies offers a full line of esd coatings and toppings , allowing you to cost effectively design an esd-control system.

It is well known that the microstructure of these coatings significantly influences their mechanical properties and biocompatibility.

SUPERIOR EPOXY PRIMER 171 will penetrate into concrete, sealing the surface to improve adhesion of epoxy toppings and coatings.

Mechanism of the technique was preliminary investigated, and inspection standard of coatings were proposed as well.

Potassium silicate based zinc-rich coatings are widely used for the corrosion protection of steel.

And points out the direction of investigation on chemical conversion coatings of aluminum and its alloys.

It was shown that polyamide from cottonseed oil was suitable as curing agent for automobile coatings, and had been found wide application.

Various decoration also up in 2009 the decoration of the spring season, can give a weak one needle into the coatings market cardiotonic ?

the surface holes are caused by forming gas in coatings, and the deep-seated blowholes are due to excessive gas content of liquid-Al.

BYK is one of the world's leading suppliers of additives used in the coatings, inks , and plastics industry.

Our dichroic coatings can be engineered and customized for your particular custom application.

The invention discloses Lyophobic and oleophilic micro nano-coatings applied to oil filtering dehydration and a preparation method thereof.

Thickener is an important assistant, which can be used to adjust the rheologic performance of waterborne coatings.

Melamine as a chemical raw material, can be used in plastics, coatings, adhesives , food packaging materials production.

The principle of electrodeposition, characteristics of cathodic electrodeposition coatings and resins, and its advantages are introduced.

Preferably experience in one of the following fields: optics, thin film coatings, mechanical engineering, industrial engineering.

Usage: can be used for coatings, paints, inks, rubber, plastics, insulation filler zone.

Used in manufacture of rubbers , ceramics, color paints, coatings, pharmaceutical, electromagnet, cosmetics.

Further, these chalcogenides glasses can be deposited in an amorphous thin film for optical coatings or waveguides.

Any of various resins, widely varying in flexibility, used in tough chemical-resistant coatings, adhesives, and foams.

The autodeposition process is simple in comparison to other processes used for applying corrosion-resistant coatings.

The adherence of these coatings to the underlying substrates is a key parameter in their selection for various devices.

Alternatively, the compositions can be used to form skin coatings on exterior portions of a honeycomb body.

Scanning electron microscope was used to observe the conformation and distribution of carbon nanotubes on the initial interface of coatings.

Besides, the parameter used to describe concrete protective coatings increasing materials close-grained capability is fixed on.

Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxide coatings to artificial light.

Dichroic coatings achieve this color or wavelength separation with a much higher degree of accuracy than conventional filters.

Thank you for your samples of striped coatings received today. Please make shipment in accordance with our Order No. 2602 enclosed herewith.

Brass powder known as " gold" , commonly used in the modulation of decorative coatings, instead of " gold" .

The thicknesses of each layer and antireflection coatings have been optimized to improve the optical properties.

Compared with the prior art, the device can be applied to ultra-long work pieces and obtaining of ultra hard and ultra thick coatings.

The research situation and progress in automobile coatings in terms of high-solid, waterborne and powder paints are reviewed.

It has shown that the prepared thermochromatic coatings provides good performance and thermochromatic effect.

This article has reviewed the present status of the fire retardant coatings at home and abroad, and predicted its further development trend.

The test results show that original properties of the coatings can be improved by the laser modification processes.

If you want a particularly high gloss, ultraviolet (UV) coatings for one of the most desirable.

the client is multinational company that serves customers around the world with healthcare products , coatings and chemicals.

akzo nobel is multinational company that serves customers around the world with healthcare products , coatings and chemicals.

Electric current gradient process was a new technique for testing the external coatings of the underground pipelines.

provisions yesterday afternoon, from Beijing hong feng line Chemical Co. , Ltd. for waterborne coatings through identification of an expert.

Herein, classification, characteristics and application of electrodeposited composite coatings were reviewed.

The casting coatings: expand and strengthen the transferred coating, surface alloying paint application fields and its mechanism.

Baker Labels also works with its subsidiary, Baker Materials, which is an HP center of excellence for substrate coatings.

Laser cladding is an advanced surface modification technique, having high potential in manufacturing wear-resistant coatings.

Incorporation of the prepared nano-particles into the styrene acrylic emulsion coatings will improve the coatings performance greatly.

Wear resistance of the coatings was tested on abrasion tester and the wear appearance of the coatings was investigated by SEM.

Depending on the printed inks and coatings, substrate itself to a considerable degree of gloss to the very serious impact.

Metallic coatings, autocatalytic (without foreign current) separated nickel phosphorus alloy coatings, specifications and test methods.

General acrylic paint, wall paint is a water-based application of a wide range of external coatings.

These coatings can degrade over time and affect the appearance of your lenses along the edges.

Micro-arc oxidation is a new technique, which can in-situ form ceramic coatings on the surface of some non-ferrous metals.

Among the traditional applications are coatings, ag chemicals and consumer products.

Experimental results showed that the properties of two coatings were stable and they reached the requirements of the thermal control design.

Occasional involvement with non-ferrous materials as well as plastics, lubricants, elastomers, adhesives, and coatings.

the thickness of coatings and the treating methods of matrix had a great influence on the anti-corrosive properties of coatings.

SHIPBUILDING. MARINE PAINTS. NON-DESTRUCTIVE ON-SITE MEASUREMENT OF THE THICKNESS OF COATINGS ON A METAL SUBSTRATE. REQUIREMENTS.

The flux coatings major task is to vaporize and form a shielding gas to protect the weld puddle from nitrogen, hydrogen and oxygen.

AkzoNobel is the largest global paints and coatings company and a major producer of specialty chemicals.

The technical requirement of oxidation resistant coatings applied to steel billet in high temperature dynamic process was analyzed.

Melamine is commonly used in coatings and laminates, wood adhesives, fabric coatings, ceiling tiles and flame retardants.

The chemical is commonly used in coatings and laminates, wood adhesives, fabric coatings, ceiling tiles and flame retardants.

Some of the commonly specified coatings include epoxies , coal tar derivatives and sacrificial zinc primers.

The corrosion resistances of the coatings were studied by polarization curves and electrochemical impedance spectroscopy.

It is shown that optimized Ni-P alloy coatings can be obtained with electroless nickel plating on the surface of AZ91 magnesium alloys.

Mg and Ti etc. Insulating, wear and corrosion resistant ceramic coatings can be obtained on surfaces of such metals by MAO.

Antimicrobial coatings shall provide a long lasting protection against microorganisms during the lifetime of the coated product.

Nickel ferrite coatings were prepared on the surface of glass beads using the polyacrylamide gel method.

Although dip coatings penetrated into the recessed areas, they were usually washed off by solvent vapors during baking. Thus, Dr.

The formulation and performances of the fire-proof powder coatings for steel structures are introduced.

And phosphating could be well used to improve the endurance of solid lubricant coatings.

As a result, the coatings on hard plastics will chip, bubble, and generally degrade over a period of a few years.

Nonstick Coatings, Ultraviolet-Cured Coatings, Industrial Coatings, Automotive Coatings, Powder Coatings, etc.

Bath compositions and plating conditions, and application fields of palladium and its alloy coatings are discussed in detail.

Twin-screw extrude machine is an important machine in producing powder coatings, the errors affect bigness in producing powder coatings.

Wheel wear test method has its particular advantages in measuring the wear resistance of anodic oxide coatings on aluminum and its alloys.

There was coloring elements in fuscous ceramic coatings energy spectrum, it shows that coloring materials were deposited in the film.

As a result of mounting a content matter, so internal coatings to prevent chemical changes is of vital importance.

Must not be used in paints, coatings and sealants, oils, or flame-retardants in rubber, plastic and textiles.

Besides, the thickness of the coatings film affects the heat - insulation, but the effect is weaker than the pigments and fillers.

If leveling viscosity cooler, and have a lower initial rate of change, coatings can be applied to a faster leveling.

Pigments are essential to the crotal temperature-fall coatings, but the pigments' dispersion is an initial problem to the latex paint.

The assortment, curing system, production technology, application and improvement methods of acrylic powder coatings are introduced.

The next stage, which the team has now embarked on, is to build complete membranes rather than mere coatings.

Paints. Thick plastics coatings. Determination of behaviour of coating applied to alkaline substrate.

Only soils which become strongly attached to coatings at elevated temperatures would be difficult to remove by laundering.

The results showed that cellulose coatings proved to be efficient methods of controlling fat uptake.

Professional site serving the polymer related industries : Plastics , Rubbers , Paints, Coatings, Adhesives and Resins .

Work on hydrogen tanks for vehicles has already produced coatings that can withstand pressures up to 700 kilograms per square centimeter.

Anticorrosion mechanism and application prospects of the polyaniline coatings were discussed.

PASE Group, Inc. manufactures equipment for the food, paint and coatings, chemical, petroleum, personal care and beverage industries.

It has also indicated the importance of testing and control of the composition, and amount of harmful and toxic substances in coatings.

Thank you for your samples of striped coatings received today.

Both coatings have been extensively applied on practical rubber products and satisfactory results have bee. . .

The action between incident light and coatings can be divided into two parts, surface scattering and volume scattering.

An environmental friendly fire resistant coatings for tunnel linings has been developed, which can be used in damp surroundings.

The High-temperature sintered color quartz sand, Sintered triangle sand Coatings use French technology for the exclusive domestic products.

A new process method used for producing metallic ceramic coatings on metals was proposed based on a lot of scientific experiments.

The Valspar Corporation is one of the largest global coatings manufacturers with almost 10000 employees in over 25 countries.

Clients span across a wide array of industries including automotive, graphic arts and printing inks, plastic and industrial coatings.

Spraying distance affects the microstructure of coatings, thereby affecting the electrifying heating properties of coatings.

Particularly suitable for plastic coatings, automotive refinish coatings, car-accessories coatings, art-craft coatings, etc.

This paper introduced the research advances of polyaniline anticorrosion coatings and different mechanisms of anticorrosion.

3-layer PE anti corrosion coatings are widely used for outside anti-corrosion of steel pipes now.

The friction factor of the various composite coatings increased with the addition of particles content.

This article has describes the progress of the two environmental friendly sorts of waterborne coatings and UV curing coatings.

Partial barium borate products used in the coatings industry primer, topcoat, is a new type of anti-corrosion materials.

Applications of electron probe microanalyzer (EPMA) to the strengthening mechanism of moulds with coatings are illustrated by examples.

Unfortunately, several problems due to piping layout, do limit the soundproofing effectiveness of said coatings.

Production of ultra-fine calcined kaolin products are widely used in paints, coatings, paper, pharmaceutical and other industries.

Anodizing of aluminium and its alloys. General specifications for anodic oxide coatings on aluminium.

The painting & thickness of coatings shall be applied in accordance with the manufacturer's recommendation.

Emulsions for coatings, building materials, adhesives, and packaging, textile, leather and paper applications ?

This paper narrates the preparation of environment friendly alkyd antirust coatings with ferrotitanium complex antirust pigment.

Certain precursors for non-wetting coatings selectively attach to certain materials, while substantially not attaching to other materials.

All coatings were prepared by hybrid physical vapor deposition processes, combining magnetron sputtering and pulsed laser deposition.

With this philosophy, we will consolidate our position as the market leader and always stay at the forefront of the coatings industry.

It is used in cosmetics, coatings for food, pencils and soaps due to its compatibility with human skin and edibility .

The heavy anticorrosive waterborne coatings for metals have been made by epoxy zinc rich and polyaniline hybrid method.

Research and product development specialists will find special product solutions for the formulation of modern coatings.

The application of appropriate nanocontainers depends on the demands required from feedback-active anticorrosion coatings.

Cross section of the coatings was observed by metallurgical microscopy. Hardness of the coatings was tested by micro-hardness tester.

For additional information about alternative coatings, please consult the SKF application engineering service.

disseminated ores, sulfides are also encountered as bands, reniform masses, and coatings associated with colloform textures.

This law applies to inspection steel, copper or copper alloy and aluminum alloy substrate surface coatings of polarity of the Yin porosity.

Polyurethane (PU) coating is one of the high-grade coatings.

The main methods protecting metal pipes from corrosion are anticorrosion coatings and cathodic protection.

The effects of coatings on the interfacial performance, mechanical property, thermal resistant property of composites were studied.

Scope The provisions of this procedure apply to the employees of BASF Shanghai Coatings Company Limited.

ROAD TRAFFIC SIGNS. RETROREFLECTIVE COATINGS. TEST METHOD FOR MEASURING COEFFICIENT OF RETROREFLECTION USING A PORTABLE RETROREFLECTORMETER.

Cross - linking FEVE fluororesin coatings show long - term durability, but it would drop if alternate structure were unreasonable.

The structure and properties of the hybrid coatings were studied by FTIR spectroscopy, SEM, TG and test experiment of film performance.

Industries served include apparel and textile, paint and coatings, automotive, plastics, photography, home theater and others.

Spoilage of biocides will influence its performance of preservation during the storage of waterborne coatings.

Formula of the coatings was optimized by orthogonal designs and range analysis, and investigation on the property of the coatings was made.

Metallic powder coatings are powder coatings with a metallic or metallized effect.

Coatings on the market now, wood stain and varnish a wide range of products and choose the right products is a cause for headache.

The methyl phenyl silicone resin for heat resistant coatings was prepared by converse hydrolysis-polycondensation of chlorosilane.

Application: This series of aqueous polyurethane dispersions are mainly used in waterbased wood coatings and metal coatings.

The basic concepts, forming mechanisms, design principles and predictive theories of self- stratifying coatings are reviewed.

Plastics and other commonly used plasticizers, also used in sealants, cleaning agent, paper coatings, inks, gum and adhesives.

Quartz crystal monitoring is an important method to control film thicknesses in non-quarterwave coatings.

Better quality objectives, e. g. with high quality antireflection coatings, minimize the need of light.

Fumed silica is mainly used in silicone rubber, polyester articles, coatings and printing inks.

Even cleaning the lens in the wrong way can wipe away special coatings and increase the chances of a scratch.

Steel tubes and fittings for on and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings.

Safety film ranges in thickness is achieved by mechanically laminating multiple layers of film together with aggressive adhesive coatings.

Metallic coatings and surface treatments of metals. Terminology. Classification. Symbols.

Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.

The coatings can be widely used on the structures that need anti-corrosive and heat-insulating protections .

Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods.

Covering power, throwing power and cathode current efficiency of solution, adhesion and corrosion resistance of coatings were tested.

The morphology, properties and microstructure of the coatings were studied by SEM, XRD, and microhardness tester.

Division I is an industrial coatings business to three major legislation for the sale of paint brands.

The deformations (deflection value) of the patterns with different coatings were measured under different loads.

PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS. METHODS OF THICKNESS DETERMINATION.

Identification, pretreatment and repair coatings of plastic components of automobiles are introduced.

Also used for paper coatings and adhesives.

We possess coatings and resins production facilities backing up by a chemical research center and trading branches at main cities of China.

The paper briefly summarized the current situation and advancement of double block copolymer as pigment dispersant for water-borne coatings.

The porosity of the coatings is obtained by the chemically densifying impregnated process.

The oxidation resistant coatings applied to steel billet at high temperature were summarized.

Recent years, safety problems of preparation and application of powder coatings are worldwide concerned increasingly.

The method of plasma spray coating was used to prepare the FeS coatings on 1045 steel substrate with three thicknesses respectively.

Major End-Use Markets: Paper, building and construction, textiles, paints, coatings, adhesives, packaging.

In this paper, we report the preparation and performances of the sol gel antireflective and protective coatings on KDP crystals.

Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution.

Metallic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes.

This paper introduces the self- stratifying coatings and its research and development.

Clariant produces high performance waxes which are used mainly in plastics, coatings and inks, as well as in adhesives and polishes.

Paint coating iron is the white paint or other internal and external coatings of of tinned.

Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures.

Advocate cleaning coating, promote recycling economics, and develop coating & coatings all together.

The formulations, application process and heat treatment process, etc of metal ceramic coatings on carbon steel surface are researched.

The result shows that the residual stress in thermal barrier coatings is a function of interface topography parameters.

The influencing rule of centimeter wave camouflage coatings in seacoast atmospheric environment was summarized.

Organic compounds. A structure sometimes used in curing agents in Epoxy powder coatings.

ROAD TRAFFIC SIGNS. RETROREFLECTIVE COATINGS. METHOD OF MEASURING COEFFICIENT OF RETROREFLECTION USING A PORTABLE RETROREFLECTOMETER.

For some of the boxes and folders for packaging, all plastic part must shed ink additives and coatings.

In general , the epoxy coatings with doped nano-Polyaniline shows better anticorrosion performance than Emeraldine base .

For coatings to be stable under intensive laser irradiation, post-heating of the evaporated films is necessary.

Effect of contaminants from soluble salts on under film corrosion of the metal substrate and degradation of the coatings was reviewed.

Escherichia coli and Staphylococcus albus were utilized to test the antibacterial ability of the coatings.

the regulated products include architectural paints coatings , printing inks , and six types of consumer goods.

Akzo Nobel , based in the Netherlands, serves customers throughout the world with healthcare products, coatings and chemicals.

In this paper, the properties and applications of inert bioceramics coatings, bio glass coatings and bioceramics coatings are reviewed.

Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods.

Tunnel fire coatings consists mainly of binder, refractory fillers, foaming material and additive composition.

Coatings can be designed freely for embossment, orange-peel of mirror style with metalline touch.

The causes, precautions, solutions and on-the-spot safety emergency preplan of common accidents occurred in coatings are described.

and performance coatings in the form of specialty resins and additives.

Our products and services enable the coloration of coatings, plastics, inks, cosmetics and architectural materials.

Depth of cured coatings, usually in microns or thousands of an inch.

The coatings, comparing to others in the same category, show excellent scrub resistance, water resistance, alkali resistance and w. . .

The new ink mixing bases were created to deliver technically sound color standards that are compatible with aqueous and UV coatings.

The bias voltage can be properly identified to achieve coatings with desired properties.

This technical bulletin describes the determination of the volatile organic compound (VOC) content of paints and other organic coatings.

Thus the principle and liquid systems for the passivation of electrodeposited zinc and zinc alloy coatings were briefed.

Fluoro_containing surfactant has unique properties. It has broad scope of applications in coatings and other fields.

Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys.

The HA coatings with granular morphology have higher resistance to delamination as compared to HA coatings with columnar morphology.

double-coated optical fibers, the physical properties of polymeric coatings and theirthicknesses should be properly selected.

But the mirror to level off, reflective coatings are evenly, otherwise it will cause deformation, reflex the light increases visual fatigue.

Performance requirements of aeronautical engines present a new technology challenge to coatings designed to protect the turbo.

The theoretical models, employed to select materials and predict trend of phase-separation in the self-stratifying coatings are reviewed.

The carbon nanotubes embedded in the coatings could effectively increase the bond strength of Ni-carbon nanotubes composite coatings.

Dozens of new companies here are making rivers of glass into solar cells, panels, and coatings, a fast-growing green industry.

The waterborne nano-complex traffic coatings are fast dry, stong wear, water and weather resistance.

The water uptake and diffusion coefficient in organic coatings were derived from the time dependent coating capacitance.

SEM pictures show surface and core morphology of the coatings under different treatment conditions.

The improvement of corrosion performance of epoxy coatings by modification with "active" and "non-active" silanes is presented.

prayed aluminum coatings afford protection against corrosion and oxidation of iron and steel at elevated temperatures.

Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings.

Heavy-duty anti-corrosive coatings, especially cabinet coatings, is another area which has bright developing prospect.

Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys.

Chromate conversion coatings on zinc or cadmium electrodeposits. Specifications and test methods.

paints . thick plastics coatings . determination of the sensitivity to water . peel test.

The coating compositions are particularly suited for forming shell coatings on solid pharmaceutical dosage forms.

Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron or steel.

In today's Business English listening Brad is a sales manager for Forrest and Brown, a producer of innovative industrial coatings and glues.