configured in

If more than one server is configured in a domain, select a server to which the connection pool should be deployed.

Make sure the plug-in is configured in such a way that requests for HTML pages will not be sent to the application server.

Boot loaders are usually configured in one of two ways: either as a primary boot loader or as a secondary boot loader.

An array of 72 to 96 cameras, depending on the size of the set, hang around the perimeter of a sound stage and are configured in a grid.

The SIBus can be configured in two modes on an Application Server cluster, depending upon the requirements of deployment.

Using this code is simply a matter of matching the name of the bridge that you configured in the Flex application.

At the back wall of the housing there is extended another catch mechanism that may be configured in the form of two clasping fingers.

The only user configured in this realm is system with a password of manager, belonging to the admin group and role .

Air casters move heavy loads on air and are usually configured in groups of four air bearings that make up the air caster system.

VIO SCSI disks configured in the global partition can be exported to a WPAR for use as a data disk or as the rootvg for the WPAR.

In actual practice, each bean can be configured in a separate configuration file representing the service provided by the particular bean.

The archive status field can be configured in the archive task profile of the CSLD configuration database, as shown in Figure 2.

Usually, the FTP service is configured in such a way that a specific directory is shared and the user can place here files to be shared.

In the simple case shown in Figure 7, the configuration resources need to be configured in a hierarchical fashion.

The applicable router(s) should be configured in a way such that all the WebSphere cluster members receive an equal proportion of traffic.

The cluster topology installed and configured in the next sections is a common topology for organizing queue managers and repositories.

All faces requests are intercepted by the Faces Servlet, which is configured in the web. xml descriptor of any JSF-based Web application.

Realize that you can also make changes to your monitoring environment from what was configured in the Monitor Test Environment.

The host name of the LPAR that hosts the database is configured in WebSphere and is contained as a binary entry in the transaction logs.

As you can see, interpreters are configured in zero. config by mapping file extensions to interpreter classes.

Therefore, the location data configured in the RTLS provider system must be consistent with the location terminology understood in Maximo.

Each of these items can be switched on and off, and most can be configured in different ways.

The systems can also be configured in a mutual takeover configuration where both servers are actively hosting different databases.

This setting maps the resource reference name "CICSECI_B" to the name of the connection factory configured in the server.

Select the configuration that you configured in the previous section, as shown in Figure 18.

JAAS authorization policies are configured in a plain text file, which makes them a little cumbersome to manage.

The password policies for an Active Directory domain are initially configured in the Default Domain Policy Group Policy Object (GPO).

This means that the binding between the MAC address and the IP address must have already been configured in the BOOTP server.

Notice that this dialog shows the real-name "Sample Security Realm" configured in web. xml (Figure 12).

In addition to the generic Interface a Factory class is generated, which might be configured in the project's config file.

As configured in the definition file in Listing 6, the handleReceiveSaveRequest function is called to handle this event.

Delete the name space binding that you configured in Advanced scenario 1.

Application IDs are also associated with application passwords, which are configured in a resource bundle in ESSearchApplication. war.

This action should be configured in the request rule of your processing policy.

b, decorative effect: can be configured in different colors, novel and beautiful appearance.

The sounds associated with each type of operating system sound event can be configured in Windows Control Panel.

There are a few subtasks that need to be configured in the Base Installation window.

This can be configured in ODBC data sources, in ODBC connection attributes, or OLE DB connection properties.

The solution: replacement of fountain solution, using per manufacturer instructions properly configured in.

Note the certificate templates that are configured in the Certificate Templates folder in the Certification Authority snap-in.

This also enables easier auditing of the environment to ensure that everything is properly configured in production.

Therefore, when comparing a prescan circuit and a postscan circuit, the postscan circuit must be configured in normal operating mode.

The XMLWebApplicationContext object contains references to all the Java beans configured in the XML configuration file.

The text to be replaced and actual replacement text will be configured in the deployment descriptor.

These servers are configured in multiple layers between the Internet and your internal network.

The initial client request to be secured as configured in the client's SAML policy set and bindings.

Input channel selection, gain settings and signal polarity can be configured in software using the bidirectional serial port.

For each core group bridge scenario, an access point group needs to be configured in each cell.

When configured in medium security mode, the dynamic routing information is obtained and used by the secure proxy server.

Set preferences in the Test Log Editor to specify the name of the server configured in Step 1.

This sequence of events repeats each time the queue depth builds beyond the threshold configured in TRIGDEPTH.

This can be configured in ODBC data sources or by setting connection attributes or properties.

Status Offline The backbone will consist of fiber optic cable configured in a star topology . . .

Gain settings, signal polarity and RTD current control can be configured in software using the bidirectional serial port.

This behavior occurs if the correct digital ID is not installed and configured in Outlook Express.

A default regional plan applies to the supplier's contact address, as configured in the supplier's Ariba Supplier Network account.

The hardware was configured in a three-tier environment using various pSeries AIX servers.

The following default compilation element is not explicitly configured in the Machine. Config file or in the root Web. Config file.

This example uses the ActiveDirectoryRealm object configured in an INI file to authenticate users.

Password based authentication is configured in two places.

Similarly, to register an Oracle server, you refer to it using the node name you configured in the Oracle client.

The SMTP domains for which you want to receive Internet mail are configured in Exchange System Manager in Recipient Policies.

Similarly, you can search for users configured in the LDAP server by selecting the Manage Users option and selecting Search again.

The File and SMTP delivery protocols simply need to be declared in the ICF and configured in each ADF.

By default, the primitive is configured in URL mode and no additional configuration is required.

There is no DHCP server configured in the system, therefore we need to enter the configuration data manually while the appliance boots.

The V2. 0 server components can be set up and configured in various topologies and configurations that affect performance and scalability.

The DefaultStylesComponent is configured in faces-config. xml, as shown in Listing 18.

If the two host names are configured in DNS, configure the correct DNS server for the two hosts.

Each plugin provides some goals whose configuration, such as binding to a specific build phase, can be configured in pom. xml.

Images for your application window are configured in this section (see Figure 12).

BPS fully-automated dry-to dry stations can be configured in almost any fashion.

In addition, a connection configured in the Connections Navigator is available as a datasource for JSP applications.

The hibernate1. cfg. xml and hibernate2. cfg. xml are to be configured in a similar fashion.

Attention indicators also display when this feature is configured in the Lotus iNotes preferences.

The JAX-RS User libraries are added to the project, and the JAX-RS Servlet and the Servlet mapping are configured in web. xml.

In our example code let us modify department entity to be configured in the second level cache.

The JAX-RS User libraries get added to the project, and the JAX-RS servlet and servlet mapping get configured in web. xml.

Corresponding traffic control report lines are configured in the M management module.

Notice that the login dialog displays dw-db-realm, as configured in the applications web. xml.

Like any custom JSF component, HelpOnFocusComponent must be configured in faces-config. xml (see Listing 17).

Both manager classes are configured in Spring configuration file applicationContext. xml, which will be discussed later.

and (4) analysis jobs are distributed across computers configured in a backend cluster.

Stereo channels are configured in the same way, but with a fixed-frequency 4-band EQ (blue).

It displays the maintenance state and alarm status of each AP that is configured in the system.

A release encompasses the full range of artifacts that can be deployed and configured in the portal.

For each emitter factory profile configured in the application server, an EmitterFactory object is bound into JNDI on startup.

Delivery extensions are configured in the RSReportServer configuration file.

The servlet container instantiates all listeners configured in the web. xml file.

They contain the Web and EJB security-related J2EE deployment descriptor information configured in the container.

Analyze ClearQuest database as configured in cqconverterconfig. Xml.

The primary WINS server address is not configured in the registry.

The cache settings can be configured in the portlet settings section (Figure 10).

Timers configured in this manner give the service every opportunity to respond.

Acegi's authenticator constructs one DN from each DN pattern configured in the userDnPatterns property of the authenticator bean.

The backup WINS server address is not configured in the registry.

The second parameter on the method is the ActivationSpec that you configured in the previous section.

Scoop eggplant color to the recipe as just configured in accordance with soup.

The call leg is configured in accordance with the mapped Quality of Service type.

Your Web site can also be configured in IIS to only accept HTTPS connections.

I could do a clean install of Red Hat Linux 8. 0 and have it fully patched and configured in less than an hour.

The providers are explicitly configured in the Machine. Config file.

The Fan Out mediation is configured in this instance to fire its output terminal only once.

But the quota is configured in the security policy, and can be set.

This section applies only when a UE is configured in MIMO mode.

It can be useful to hide the directory server information (ip, port etc) configured in the Cognos Configuration for namespaces.

Some packaging types are available from plugins configured in pom. xml.

Categories can be created and configured in any order.

In this task, you will modify the Flat File connection manager that you created and configured in Lesson 1.

The sample code provided with this article has the location configured in the Java source code.

If the MDBs are subscribers, they will all share the subscription properties configured in the activation specification.

Each routing process calculates its cost differently and the costs may need to be manually configured in order to achieve load balancing.

The Solr server is already configured in the Solr version included in the download.

The shard ID will be mapped with respect to the virtual shard ID map configured in the later steps.

To improve how components are configured in application.

This topic assumes that only one Edge Transport server has been configured in your organization.

Creates a channel that is used to send messages to a service whose endpoint is configured in a specified way.

failure. jsp will be launched, as configured in the default module's struts-config. xml file.

Such plug-in components are registered and configured in the IIS metabase.

When configured in high security mode, the secure proxy server will route application requests based on static route data.

For Cairngorm, we offer a service locator that can be configured in the IoC container.

We have configured in the notification plug-in properties file that a specific governance notifier class gets invoked.

Incorrect settings are configured in the computer BIOS.

You may also use a standard IBM Cognos 8 audit logging database, which should also have been configured in this way.

This article assumes the following products are already installed and configured in your machine.

The following default assemblies element is configured in the root Web. Config file.

This setting is configured in the transformation.

For simplicity's sake, the example scenario will be configured in this manner.

Then the three Notes widget components receive information as configured in the Wiring Pane page.

However, imagine walking down a street full of open access points configured in a mesh (802. 11s).

The following default connectionStrings element is configured in the Machine. Config file.

NAT can be configured in various ways.

The first and third parameter are the same ones originally configured in Part 1.

The classpath is configured in the operating system.

The runsql command takes a database name, which we configured in the zero. config, and the script name.

You'll need to output this dynamically to add the final field, the list of categories configured in your blog.

Whenever a message is received it will be sent to the service endpoint configured in the consume section (#1).

The second request will be secured as configured in the client's trust policy set and bindings.

The Bash shell is already installed and configured in your Linux system.

Pages will be sorted according to the settings configured in the Automatic Sorting section.

Buffer settings are configured in the bufferModes element.

Consider the following print queues configured in AIX.

The site-map provider is configured in the Web. Config file.

Therefore, they are configured in unsecured mode.

It can be configured in both twin-tube and mono-tube body styles, depending on available space.

The following default webServices element is configured in the machine configuration file in the. NET Framework version 1. 0.

Type the jamon setup command and you will see JAMon being configured in your application.

In the sample output, there are four portlets configured in normal mode.

These are used to look up the correct renderer and the component that is configured in faces-config. xml.

The following default compilation element is configured in the Machine. Config file in the. NET Framework version 1. 1.

The package published and the corresponding stored procedure created in the Step 6. 3 is configured in this task.

SQL Server Management Studio is a flexible tool that can be configured in a variety of ways to support your preferences.

This check requires that a database index for the attribute CSCDISIS is configured in CM.

The mail databases were spread across five IBM FastT 200 GB arrays, also configured in RAID 0.

The authenticator creates user DNs using the DN patterns configured in the userDnPatterns property of Listing 5.

The following default rules element is configured in the root Web. Config file in the. NET Framework version 2. 0.

For example, if the application has been configured in IIS to allow anonymous access, IIS performs no credentials check.

On the other hand, "tactical governance" results in which policy gets configured in which SOA platform for specific integrations.

Backup image is from a Job Server, but there is no Job Server configured in the farm.

Figure 6 shows a multi-image pattern configured in version 2. 0.

This is a unidirectional route. You must have a route configured in the opposite direction.

The following default webControls element is configured in the machine configuration file in the. NET Framework versions 1. 0 And 1. 1.

This column is read-only and specifies the name of a parameter configured in a previous step in the Configure Data Source dialog box.

Number of user schedulers configured in the SQL Server process.

When you view journal rules on a Hub Transport server, you can view any journal rule that is configured in the Exchange 2007 organization.

For example, look at the first DN pattern configured in Listing 5, which is uid={0}, ou=employees, ou=partners.

The reference points to this resource reference name and target data source, which is automatically configured in the extended EAR.

The environment can be configured in a number of locations, depending on need

yet another alternative exists on vmebus systems : the ip address can be manually configured in boot rom

A database realm requires two SQL statements to be configured in the security realm

Exception configured in Outlook rule does not prevent move of received message to folder

Allows the section to be configured in any configuration file or directory, as follows

SIF is configured in the XML configuration file as shown in Listing 2

Returns a language name associated with the specified file name extension, as configured in the

the doping regions are configured in the substrate between every two adjacent gate structures;

The Spring variable resolver is configured in the faces-config. xml file using the variable resolver node, as shown in Listing 1

Here is an example of how a service locator can be configured in a Struts Action

APIs to access a manager (which you configured in the zero. config), which then uses the zero. data

element element is configured in the machine configuration file

An instance of the ActiveMQ RA, to access the ActiveMQ message broker configured in Listing 2, using the TCP protocol for transport

multiple asp . net resources configured in a single file

The forwarding of mail for root to the regular user account is configured in

element element is configured in the machine . config file

QFS loads the default Provider as configured in qfs_config. xml

The following list describes the different types of connectors that can be configured in Exchange 2007

Display the colours configured in the pattern

If a resource should be accessible only by a specific user, it is configured in smb. conf as follows

A service timeout has been configured in one or more of the service components

Interceptor filters use three components to make authorization decisions, which I have configured in Listing 7