ansys

Aimed by the finite element software ANSYS, this paper carries out a dynamical and time-history analysis of a frame structure.

ANSYS was used to calculate the stress within membranes of welded metal bellows used for mechanical sealing.

The static and dynamic characteristics of the beam of a gantry-type machining center are analyzed by means of ADAMS and ANSYS.

The elastoplastic finite element analysis, strength reduction method and ANSYS software are used for the calculation.

Then one of the finite element analysis software, ANSYS was used in this paper for mechanical analysis.

the finite element tool ANSYS and theory calculation were used for the specimen STJ-4, and compared to the experimental results.

The Ansys software was used for simulating the 3D electric field distributions of the impedance sensor in stratified flow.

The stress of clamping of the closing sleeve is calculated by means of finite element of ANSYS to optimize clamping structure.

ANSYS software was used to find the best reinforcement of the whole slab within the low and up bounds.

Then, the SMA damper passive control of a frame structure is simulated by ANSYS according to its relative parameter selection.

In this paper; we present a computational study of the jetting process using ANSYS fluid-structure interaction (FSI) analysis tools and .

Shape optimization for bracket is studied, by means of the Random Designs and the Sub-problem method by ANSYS Software.

The electro-acoustic characteristics of the miniature broadband and wide-beam longitudinal transducer are simulated by the ANSYS software.

The mechanism of heat conduction in polyfoam-fly ash thermal insulation materials (FP) was studied with a finite element software ANSYS.

The article analyzes the stress state of asphalt overlay in vehicle load by a calculation of finite dement procedure ANSYS.

Experience: Working knowledge with ANSYS is preferred. Experience in semiconductor manufacturing is an added advantage.

Through bidirectional data interchange between ADAMS and ANSYS, dynamic stress analysis of this elastic mechanism is conducted.

The important part of this article is to simulate the stable and transient thermal distribution using the Analysis system (ANSYS) software.

By the first-order method in the optimized design module of ANSYS, the optimized design program is worded out in the APDL language.

In this paper, ANSYS software is introduced and is used for the analysis of no-load magnetic field of the synchronous generator.

For the first used software - ANSYS, the author namely has carried on the narration to the static theory of the finite element analysis.

In addition, through a instance ANSYS software was applied to optimize electromagnetic thrust fluctuation design.

The software ANSYS was used to analyze two different examples and utilized the result to make precision evaluation on the formula.

About the safety performance of the Ye Sanhe suspended-pipe bridge, this paper carried out a full-bridge simulation analysis using ANSYS.

Introduce an analyses process by doing FEA calculate to the U-style BOP's body and intermediate flange with ANSYS.

Analysis of the non- linear finite element for the structural model of a short-leg shear wall is done by using ANSYS software.

Thirdly, the main frame has been designed optimally by the means of statics and modal analysis in ANSYS software.

Through ANSYS analysis, equivalent load method is found to be applicability in finite element analysis.

The contact behavior between the reinforcement pad and the vessel shell was analyzed with nonlinear method of the software ANSYS.

Then the author of this article employs ANSYS software to investigate the creep effect of twice-prestressed concrete composite beam.

ADAMS & ANSYS is combined by using neutral file in the system, and this system can simulate the automotive seat's performance during impact.

Making APDL command by using this algorithm, appending the menu to the main menu of the ANSYS, the system is completed.

Based on the experimental data, the stress and strain of oil tube were calculated by means of the finite element software ANSYS.

The results of the analysis by ANSYS indicated that the resistance factors in the cold-formed steel specification is slightly small.

Utilizing ANSYS, the static deformation and natural frequency for the spindle of the NC boring-milling machine are analyzed.

ANSYS, a finite element software, was used to analyze the structural behavior to guide the fatigue test.

This thesis does secondary development to realize raft foundation analysis with intuitionistic model, simply calculation and convenient use.

In this thesis, a program for the form finding of the BSS is compiled with the APDL language used in ANSYS parametric design.

Analyse the traveling wave induction launcher temperature field with the method of ANSYS electromagnetic analysis (thermal coupling module).

The results show that: in the homogeneous soil, the results of simulate using ANSYS is in line with the existing research.

In addition, a real pier is analyzed in practical to show the feasibility of the theory, where the popular software ANSYS is utilized.

Then a program for the finite element modeling has been developed to create data files which can be transferred to ANSYS directly.

And show the ANSYS as one of the most famous finite element software for seismic research value.

Soil disturbance and destruction around the tubular anchor which is driven by pneumatic hammer is simulated by ANSYS software.

Element PLANE42 in ANSYS is used for analyzing and calculating the wall-frame vierendeel truss in this paper.

These plates were simulated by means of ANSYS programs, and afterwards, the accuracies of model were verified.

Then a nonlinear seismic response analysis of a transmission tower, which is located in Shenyang, is studied by the FEM soft ANSYS.

Secondly, the structure was optimized and calculated by means of ANSYS.

Correlation program was programmed with MATLAB and ANSYS to realize multivariable structural optimization using above methods.

ANSYS software simulation of the arch tunnel excavation and support structures of the finite element method were researched.

An intensity analysis was carried out to the friction weld area of turbocharger shaft with ANSYS finite element analysis software.

At last, the developed user element is verified with the ANSYS element by comparing the simulations of the upsetting of cylinder.

Discusses how to take advantage of ANSYS software to optimizing the structure designing of a vacuum smelting vessel.

The whole numerical simulation course of hydraulic expansion between the tube and the tube sheet is solved by ANSYS software.

Then it analyzes the fluid flow and electric field distribution of the designed processing chamber models by ANSYS software.

A thermoelectric FEM model is developed to analyze the transient thermal behavior of resistance spot welding process, using ANSYS program.

While using ANSYS software to simulate thermal stress of mass concrete, it is the key step to read in data of temperature field effectively.

In the thesis, on the basis of the UG drawings, a geometric model of the full scale coach-frame was firstly established utilizing ANSYS.

The system's moving is smoothly. After this we use ANSYS to analysis the system's ford and deformation.

Finite Element based method using ANSYS simulation is proposed to analyze the distribution of electric field in aluminum reduction cell.

Effects of processing parameters on eddy current in Cu-Al-Cu cladding plate have been simulated by ANSYS software.

Furthermore, the ANSYS software is adopted to simulate the stability of the cover terrane and the maximum permit exposure area.

The paper checks the safety and stability of shoulder pole girder for hoisting large dynamotor stator with finite element software ANSYS.

In order to define suitable alloy heaters and achieve their reasonable layouts, thermal analysis was carried out with ANSYS code.

The biggest deflection of elastic unit and the stress were simulated by the ANSYS software. The result proved that the design is right.

The technologies of the analysis with ANSYS on the strengthened structure using fiber lamina are studied.

The linear tools within ANSYS could be easily accessible for evaluating strength of pressure vessels.

The finite element numerical simulation for the triaxial compression tests also had been carried out using the commercial software ANSYS.

And the ANSYS finite element analysis is used to choose the number of hydraulic pressure vats, which are distributed in the pile gripper.

Using ANSYS analyze the reaction of pile-wharf with the link-banked joint and without the link-banked joint in horizontal earthquake.

Simultaneously solves the support reaction of the key components, folloewd by the stress analysis through ANSYS.

Correspondence with the result calculated by finite element software ANSYS, the equations are verified accurately.

ANSYS software will be applied to analyze the stress of connecting rod, and the maximum stress and displaced shape are showed.

Especially the use of calculation software, SAP and ANSYS, get a good effect for the research on the support system of transfer floor.

The result indicates that it is credible and feasible using ANSYS to calculate GMAW temperature field and introducing double-apex heat flux.

This article, we simulated by ANSYS rock the size of the internal stress and strain and change.

Then, using ANSYS user interface design language UIDL, can develop a simple user interface.

A new model of flow in a twin rotor continuous mixer was analyzed with the finite element software ANSYS.

The regressive calculations of three dimensional FEM for the initial geostress in engineering area are achieved through ANSYS software.

ANSYS program is a good tool that carries on thermal and structural analysis, and its application on the ladle is very wide.

General FEM package ANSYS is used for describing the behavior of brick masonry under in-plane load.

The moving laser beam is simulated with the employment of ANSYS parametric design language and latent heat is considered by using enthalpy.

Firstly, a commercial FEA software ANSYS is employed to construct a three-dimensional finite element modal of turbine blade.

Finally, the results of FDTD algorithm are compared with the ANSYS simulation results, and the two data curves match well.

Secondly, the model of deck pavement is analyzed by finite element software ANSYS to get its stress and strain distribution.

Using the ANSYS software, the article indicates the numerical simulation analysis of the prototype structure and the damage structure.

The finite element model of the track is established in ANSYS. It includes the rail, the pad, the sleeper, and the ballast.

In this paper, non-linear buckling analysis of the membrane under shearing loads is performed by incorporating the ANSYS SHELL63 element.

The finite element model for press joining mould and sheets is built up on the platform of finite element analysis software ANSYS.

Responsible to perform thermo-mechanical simulations for new product designs using FEA modeling tools e. G. ANSYS.

The electromagnetic fields on the whole supporting system were also simulated by ANSYS to validate and improve the design.

The element size affects greatly the simulation result during finite element analysis of structure, in ANSYS.

In this paper, the statical stresses of the C-arm is studied through using ANSYS software by FEM and experiment.

Dynamic property of Magnesium alloy cooling impeller made of aluminum alloy before was analyzed by ANSYS 7. 0.

In this study, the stress analysis and fatigue life analysis was conducted by ANSYS finite element analysis software.

The elastoplastic analysis is finished with ABAQUS, the upside spatial steel truss and the node analysis is computed with ANSYS.

The steady thermal analysis for the first-wall of CH HCSB TBM module is carried out firstly using the general FE code ANSYS.

We applied finite element software ANSYS to analyze the strength of the motorcycle frame which has been designed.

Finally, the finite element analysis to the stress and displacement of the spindle in ANSYS has been carried on.

A number of related techniques of importing modal neutral file from ANSYS to ADAMS are described.

A computer aided teaching system for muLticomponent phase-equilibria has been devel oped in the workstation based software ANSYS.

The rollers' steady model were established and analyzed by ANSYS Finite Element Analysis Software.

Do model analysis, transient dynamic analysis and kinematics analysis etc by using finite analysis software ANSYS.

Objective Discuss the application of the design and fabrication of mandibular titanium framework based on ANSYS and rapid prototyping.

The usual elements for concrete and steel bar used in ANSYS are introduced.

The plane frame is calculated under horizontal load-wind and earthquake by using ANSYS finite element analysis software.

A finite element numerical analysis model of embedding pipeline is built by using ANSYS finite element analysis program.

Spatial model of finite element analysis of hinge joint voided slab bridge is established by ANSYS software.

Base summing up other's experience, improves the research result to simulate the weld process of board surfacing by FEM soft ANSYS.

PDS module in ANSYS namely Stochastic FEM, is adopted to predict tunnel deformation and the probability of TBM jamming.

Based on the optimization modal in ANSYS, the structural design for the portal framed structure of a double-hull sand dredge was optimized.

According to the analytical results, preliminary support design was given and final support setup optimized with ANSYS code was achieved.

Secondly, PDS module in ANSYS software about main contents of reliability is introduced in detail.

Some comments were also made on the application of the ANSYS in the civil engineering field.

Using ANSYS software, this paper establishes the 3D FE model for the impeller vane, and makes static strength calculation.

In this paper, a finite element model of a frame, which used a new connect analog mode, was established based on ANSYS.

The effect of input angular velocity, angular acceleration and driving speed to Coriolis effects was analyzed by ANSYS software.

In this paper, using ANSYS procedures are completed, the linear beam element simulation stent bar.

According to the principle of the finite element method, simplified finite element model is created in ANSYS by using output loads of ADAMS.

In this paper 192 groups of girder model with the transverse stiffener were calculated with ANSYS finite element system software.

The method is coupled with ANSYS to accomplish the optimal design of one composite wing, and the weight is reduced distinctly.

The stresses and deformations of shell and plate supporting a uniform load are calculated by ANSYS.

ANSYS software is used to simulate the temperature fields, the residual stress fields and the deformation fields about the low-carbon steel.

The method to simulate the temperature field with cooling pipes by ANSYS is proposed, and the key problems in the process is analyzed.

This thesis of ANSYS software of gear static analysis and optimization of virtual design of gear.

This article adopts the ANSYS software to simulate the magnetic field in transformer.

The simulation of magnetic induction lines and energy distribution, reasonable interval angle pole, were got by ANSYS. 3.

The ground stress is also simulated using large scale finite numerical simulation software ANSYS.

The eddy current of spider arms for air core smoothing reactor is simulated with ANSYS software.

Optimum design of the composite shell of pulse motor has been presented using ANSYS soft ware.

The large deformation of the part is dynamically analyzed and computed with ANSYS-DYNA3D software.

It give new method in application development of ANSYS, forecast the location of cables, calculation of tension of cables.

Modal analysis of the component was performed by using ANSYS, and based on the results, modal superposition was calculated and discussed.

The paper developed the special system for finite element analysis and optimization of machine tools components based on the ANSYS software.

At first, used ANSYS to analyze the anchorage zone on the cable bent tower and investigate stress distribution and deformation at the area.

The temperature change of knitting needles during quenching in the mesh-belt furnace was simulated using the ANSYS software.

Given the boundary and initial conditions, thermal field and structure field of sic in metallurgy furnace are computed using ANSYS.

By using ANSYS right ZM110-cat from vertical tower into the standard model, and the various conditions of static analysis.

Applying both HyperMesh and ANSYS to finite element analysis and optimization can advance our work efficiency.

Use the anisotropic material properties setting in ANSYS to simulate the tunnel's horizontal and vertical stiffness. 3.

Heat structural coupling analysis under mechanical and temperature load is analyzed by using the powerful software ANSYS.

we use ANSYS in dealing the stress and strain in the analysis of results , providing relevant information in checking for cracks 3.

This paper introduced the detailed procedures of modeling a 3-D straight through crack with ANSYS solid modeling method.

Utilize the optimize design method in the ANSYS software to optimize to the model size.

The method and the theory of nonlinear calculation in the ANSYS are discussed.

Second a single Li-ion battery " s thermal is analyzed using ANSYS, and this method" s veracity is validated.

By using the ANSYS software for the structural analysis and calculation of the blade of axial flow pump.

The behavior of the cold rolled strip buckling was studied using the ANSYS finite element method.

ANSYS extraction and quality of matrix stiffness matrix method.

Finally, using the finite element method and the ANSYS to analyses the stress of the reconstructed model.

An finite element model is established by ANSYS, the deformation of optical mirrors caused by temperature field is analyzed.

We had made numerical and modal analysis on the dynamic feature of F320 model derrick with ANSYS software and modal analysis technique.

ANSYS as a platform to build two hydro-generator group axis system model.

The stress field of composite plate subjected to low velocity impact was simulated using finite element soft package of ANSYS.

Take the Chongqing Diwei Changjiang road bridge as an example, and use ANSYS to analyse the bridge structure.

The dynamical analysis of quadrangular pyramid grid structure modality and seismic response is made by ANSYS.

By ANSYS parametric design language, parameter modeling and mapped meshing of large scale marine helical gears are carried out.

In this paper, made use of software ANSYS to calculate the strength of a 45-meter double-hull sand dredge structure.

The bend shapes of rail during cooling at air after hot rolling were simulated using the finite element software ANSYS.

This Dissertation take JQ900A type Erector as research object, Using the finite element analysis software ANSYS to simulate the structure.

Because of its operational and extension, ANSYS can be used to design complex PCMs module size and direct the choice of PCMs.

The simulation model of the wheel is set up and the stress of shrink fit has been analyzed by using ANSYS.

It also analyzes the displacement and Von-Mises stress of tank under the load of full water with ANSYS software.

The ANSYS software is used to analyze the pretension of cable based on truly simulating the boundary condition and supporting rigidity.

According to the idea of simulative experiment, the bearing capacity is analyzed on L-shaped shot-leg shear wall by using ANSYS.

The contact finite element optimization model based on Augmented Lagrange method was established by ANSYS parametric design language (APDL).

By using the heat analysis module of ANSYS code, the 3D temperature field of the floating tile was calculated.

Eddy current testing system of carburized materials was developed by using ANSYS software as second development platform.

The application of ANSYS for calculation of piled wharf under the traveling load was studied.

Based on the Shengli kaifa 1# bottom supported platform, the ANSYS-finite element analysis software makes the earthquake response analysis.

Based on the substructure technique of FEM, the model of the fin heat exchanger using the commercial software ANSYS is analyzed.

In order to elevate the precision of applying ANSYS to solve a two-dimensional unbounded electrostatic field, a mapping method is presented.

The shear lag in the curve box beams is analyzed by calculating with ANSYS.

And it also analyzed the under stress of the main parts in ANSYS.

The paper uses ANSYS to establish a finite element model of bearing-spindle system and do the modal analysis.

In this paper, the death cell of ANSYS is used to simulate the secondary load.

The common methods of theoretical analyze contains ANSYS, theory of gray forecast model and so on.

According as above failure mode, a series of numerical analysis is accomplished based on finite element program ANSYS.

ANSYS software based on the quality of clutch two-car spin fatigue damage simulation methods.

This thesis analyst a certain type conveyor's driving drum based on the software of ANSYS.

This paper researches the effect of non-uniformity settlement on upper structure by using large-scale FEM software ANSYS. 1.

However, the test range was relatively reduced while the micro channel width was narrowed.

ANSYS software is used to design the axial compensator using the static electromagnetic field finite element analysis is carried out.

The interference fits of bushing bearing has been calculated by finite element method based on ANSYS.

The burst of soft rock is studied by program ANSYS.

The fatigue critical site aside turbine disk pin-hole was located based on the FEA of ANSYS.

The finite element 3-D model of smoking desulfuration absorber tower is established based on ANSYS.

The steady stated temperature field of end bearing was analyzed b3 the ANSYS software.

The paper uses PKPM-SATEWE and ANSYS on space analysis to this system.

Tow mechanics models of pile group of 4 or 9 piles were established with ANSYS software.

A laser forming FEA system has been developed by using VB and APDL which is a secondary development tool provided by ANSYS.

Drilling riser in deepwater, which was often acted on by extreme load of wave and current, was analyzed by ANSYS.

Based on ANSYS, this paper illustrates how to design the structure of injection mold cavity with finite element analysis efficiently.

The 3D finite element numerical dynamic simulation of welding between hollow ball and pipe was carried out based on ANSYS.

Then, analysis, which was based on three finite element models, was carried on a cantilever beam.

There is a tool called ANSYS, it can study stone as elastoplasticity.

Supporting design of a certain extra-large foundation pit engineering and its ANSYS deformation simulation

Study of the Influence of Paper-pulp Material Structure on Cushion Performance with ANSYS Simulation

the processes using ansys to carry through strength analysis and optimum design are introduced as a focal point

ANSYS analysis and regularity distribution study of internal force on short-shear wall structure system,

The wind-resistance and aseismic analysis of tall building structure based on ANSYS

ANSYS- based Structure Analysis and Experimental Study of Box - shaped Steel - structure Load - bea

Used the software ANSYS to carry out the finite element simulation analysis of the cutting temperature field of the work piece;

Problems of simulating reinforced concrete component with ANSYS and its countermeasures

ANSYS Software and Its Application in a Radar Antenna-pedestal Structure Design

The optimum design of the fire-resistant protection of simply-supported steel beam by ANSYS analysis

We used the ANSYS to establish the arm support structure shell model, and has carried on the simplification to it;

ANSYS Software and its Application in Determination of Initial Cable Forces in Cable-stayed Bridges under Dead Loads

Urumqi; Cylinder concrete pipe; Self-compacting concrete; Orthogonal experiment; ANSYS analysis;

Use ANSYS to Predict the Turbulent Flow in the Heat Exchanger Tube with Hydraulic Turbine

A Simulation Study of Multi-electrode Capacitance Sensor Using ANSYS Software

ANSYS analysis and experiment comparison of the force-frequency characteristics of quartz resonator

Behavior analysis of energy dissipated low - rise concrete shear wall with mezzanine rubber cushion by ANSYS

Accept Force and Distortion Analysis of Airproof Component of Oxygen Sensor Used in Vehicle Based in ANSYS

Numerical Simulation Technology of Practical Engineering and Its Practice on ANSYS

ANSYS-based Finite Element Analyses on Three-dimensioned Stress State of Cracking Tip for Stretch Slab

ANSYS Secondary Development for the Finite Element Analysis of Pre-stressed Reinforced Concrete Structures

Application of composite support in foundation pit support and its simulation applying for ANSYS

Application of ANSYS Program in Deformation Analysis of a Milling Arc Component

Mechanical Analysis of Bridge-pavement Crack about Simple-support before Continuous Bridge Model by the Software of ANSYS

Vibration Analysis of the Aerospace Rugged Computer Using ANSYS Dynamic Simulation Technique

A Study of the Accurate Exertion of Cable Forces of Cable-Stayed Bridges by ANSYS

Application of ANSYS Parametric Design Language in Optimization Design on Load-crossbeam of Electrical Dust Precipitator

Simplified algorithm of vibration on large span cable-stayed bridges and its realization in ANSYS

Application of ANSYS software in design of the sectionalized capacitance liquid-level indicator

A Pre-processing Software of ANSYS for Analyzing Transfer Structures and Its Application

Application of Finite Element Software ANSYS to Calculate Characteristic Impedance of Transmission Line

Redevelopment of ANSYS and Its Application in the Thermal Sealing Analysis of Pressure Vessel

Optimization Of Design Parameters; Bridge Approach Slab; ANSYS; Research Bridge-Head Bump; Beam on Elastic Foundation;

Secondary Development Technology of ANSYS and Heat Transfer Module of Shallow Buried Underground Engineering

Stress Analysis of a Tripod Sliding Universal Joint with ANSYS Software

Using ANSYS Numerically Simulating the Influence of River Water Fluctuating on Geoelectric Observation

Stress analysis of the numerical control omnipotence mill principal axis using ANSYS software

In this paper, the static strength analysis of one gantry crane were accomplished on difference working conditions by the ANSYS;

Using ANSYS based CAE technology to simulate and analyze electronic equipment cabinet structure statics testing data

Then we have used ANSYS modal analysis module to calculate the arm support structure natural frequency and modality mode of vibration;

Application of ANSYS in the Flow Field in the Cleaning Device of a Rape's Combine Harvester

ANSYS in analysis concrete structure temperature field and temperature stress application

Investigation of ANSYS-based nonlinear optimization of bridge-completing cable force of large-span cable-stayed bridges

Discussion on Structural Analysis with Finite Element Analysis Program ANSYS for Suspension Pipe Bridge System

Geometric Non-linearity Theory in ANSYS and Its Application to Bridge Structures

Analysis and design with ANSYS for rubber piston membrane used in pneumatic brakes

ANSYS redevelopment and its application based on partitioned solution procedures of coupled mechanical systems

Application of ANSYS Program for structural Transformation and Optimization

ANSYS software and its application in the parameter optimum design of double thin-wall pier

Research on the Mechanical Behavior and ANSYS Analysis of Steel Reinforced High Strength Concrete Frame Joints,

Comparison of crystal thermal distortion between simulation by ANSYS and experimental result

Application of ANSYS in Analysis of No-load Harmonic Magnetic Field for Harmonic Excited Synchronous Generator

Application of ANSYS Secondary Development Technology in Excavation of Deep Foundation Pits

Structural Analysis of Hydraulic Reinforced Concrete Tunnel by Ansys Finite Elements System