atomic absorption

Comparing the results by this method with those of atomic absorption, a good agreement is found between them.

ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION FO ALUMINIUM. DETERMINATION OF MANGANESE CONTENT. FLAME ATOMIC ABSORPTION METHOD.

ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM. DETERMINATION OF CALCIUM. ATOMIC ABSORPTION METHOD.

ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM. DETERMINATION OF ZINC. ATOMIC ABSORPTION METHOD.

Coating antimony content is measured by atomic absorption spectrometry, which is accurate and easy to operate.

FRUITS, VEGETABLES AND DERIVED PRODUCTS. DETERMINATION OF THE ZINC CONTENT BY MEANS OF ATOMIC ABSORPTION PHOTOMETRY.

Analysis of the solder pot is done by means of Atomic Absorption Spectrophotometric (AAS) or Inductive Couple Plasma (ICP) .

In atomic absorption spectrophotometry, the calibration curve is always required.

This paper studies the calcined cement clinker with tungsten tailings by means of atomic absorption spectroscopy(AAS) and X-Ray diffraction.

Methods: Using flame atomic absorption spectrophotometry and graphite furnace atomic absorption spectrophotometry to determine the contents.

It was studied that the direct determination of total chromium in water and wastewater by flame atomic absorption spectrophotometry.

Analytical techniques used in this study included qualitative analysis, volumetry, gravimetry and atomic absorption spectrometry.

Method: Atomic absorption spectrophotometry was used to determine the content of trace elements in hair.

A higher temperature flame than atomic absorption spectroscopy (AA) is typically used to produce excitation of analyte atoms.

Methods Graphite furnace atomic absorption spectrometry was used to analyze the nickel in the oil with Zeeman background correction.

Cellulose. Determination of the manganese content. Sodium periodate photometric method and flame atomic absorption spectrometric method.

The atomic absorption law determination calcium has the sensitivity to be high, reproduction quality good characteristic.

Formaldehyde method can be used to replace flame atomic absorption method in the determination of manganese in hair.

Cellulose. Determination of the calcium content. Edta titrimetric method and flame atomic absorption spectrometric method.

CHEMICAL ANALYSIS OF FERROALLOYS. DETERMINATION OF ALUMINIUM IN FERROSILICON. ATOMIC ABSORPTION SPECTROMETRIC METHOD.

Liming materials - Determination of magnesium content - Atomic absorption spectrometric method.

FRUIT JUICE AND VEGETABLE JUICE. DETERMINATION OF THE ZINC, COPPER AND IRON CONTENTS. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.

CHEMICAL ANALYSIS OF ALUMINIUM AND ITS ALLOYS. DETERMINATION OF CHROMIUM. ATOMIC ABSORPTION METHOD.

Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method.

Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method.

The contents of copper in juice beverages and water for drinking were determined by a highly sensitive flame atomic absorption spectrometer.

Uncertainty of determination cadmium in recycled water samples with graphic furnace atomic absorption spectrometry was introduced.

Phosphoric acid for industrial use (including foodstuffs). Determination of calcium content. Flame atomic absorption method.

PTFE tube was used as transferring line of capillary column gas chromatograph with graphite furnace atomic absorption spectrometer.

stationary source emission . determination of cadmium . graphitic furnace atomic absorption spectrophotometric method.

Water quality - Determination of aluminium - Atomic absorption spectrometric methods.

For the acid eluent, cobalt ion content was tested by atomic absorption and ligand content were determined by the Kjeldahl method.

PIGMENTS AND EXTENDERS. TITANIUM DIOXIDE. DETERMINATION OF ADDITIVE ELEMENTS BY ATOMIC ABSORPTION SPECTROMETRY.

CHEMICAL ANALYSIS OF COPPER AND COPPER ALLOYS. DETERMINATION OF MANGANESE CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.

The acidity conditions were discussed about determination of total chromium with AAS(flame atomic absorption spectrophotometry).

CHEMICAL ANALYSIS OF CHROMIUM ORES. DETERMINATION OF LEAD . ATOMIC ABSORPTION SPECTROMETRIC METHOD AFTER SEPARATION ON ION-EXCHANGE RESIN.

stationary source emission . determination of nickel . graphitic furnace atomic absorption spectrophotometric method.

A novel method, indirect atomic absorption spectrometry, was established to determine oxalate in food.

CHEMICAL ANALYSIS OF ALUMINIUM AND ITS ALLOYS. DETERMINATION OF LEAD. ATOMIC ABSORPTION METHOD.

CHEMICAL ANALYSIS OF ALUMINIUM AND ITS ALLOYS. DETERMINATION OF ZINC. ATOMIC ABSORPTION METHOD.

Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method.

Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry.

The content of trace elements in tea and its extraction liquid was determined by atomic-absorption spectrometry.

Chemical analysis of ferrous materials. Determination of calcium in steels. Flame atomic absorption spectrometric method.

Fertilizers and soils conditioners. Determination of calcium by atomic absorption spectrometric method.

CHEMICAL ANALYSIS OF COPPER ALLOYS. DETERMINATION OF ANTIMONY CONTENT. ATOMIC ABSORPTION SPECTROMETRY METHOD.

LIQUID PETROLEUM PRODUCTS. DETERMINATION OF HIGH LEAD CONCENTRATIONS IN FUELS. METHOD BY ATOMIC ABSORPTION SPECTROMETRY.

The acidity conditions are discussed about determination of calcium with AAS(flame atomic absorption spectrophotometry).

POTASSIUM HYDROXIDE FOR INDUSTRIAL USE. DETERMINATION OF CALCIUM AND MAGNESIUM CONTENTS. FLAME ATOMIC ABSORPTION METHOD.

Chemical analysis of ferrous materials. Determination of nickel in steels and irons. Flame atomic absorption spectrometric method.

Chemical analysis of ferrous materials. Determination of titanium in steel and iron. Flame atomic absorption spectrometric method.

A method for the determination of silver in metal cluster compounds with halogen by flame atomic absorption spectrometry is described.

Animal feeding stuffs. Determination of calcium content. Atomic absorption spectrometric method.

SODIUM SULPHATE FOR INDUSTRIAL USE. DETERMINATION OF CALCIUM CONTENT FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.

The content of micro selenium was determined by flow injection-hydride generation-atomic absorption spectrometry after digestion.

CHEMICAL ANALYSIS OF STEEL AND CAST IRON. DETERMINATION OF MOLYBDENUM CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.

stationary source emission . determination of tin . graphitic furnace atomic absorption spectrophotometric method.

Water quality. Determination of chromium. Atomic absorption spectrometric methods.

CHEMICAL ANALYSIS OF STEEL. DETERMINATION OF SILICON CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.

Copper and copper alloys. Determination of aluminium content. Flame atomic absorption spectrometric method.

Animal and vegetable fats and oils - Determination of cadmium content by direct graphite furnace atomic absorption spectrometry.

Chemical analysis of ferrous materials. Determination of lead in steels. Flame atomic absorption spectrometric method.

The recoveries of plumbum were determined in different enrichment conditions by flame atomic absorption spectrometry.

PHOSPHORIC ACID FOR INDUSTRIAL USE. DETERMINATION OF LEAD CONTENT. ATOMIC ABSORPTION SPECTROMETRIC METHOD.

abstract: Objective: Establish graphite furnace atomic absorption spectrometry urine test methods of iron.

COPPER AND COPPER ALLOYS. DETERMINATION OF CHROMIUM CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.

COPPER ALLOYS. DETERMINATION OF CADMIUM CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.

FRUITS, VEGETABLES AND DERIVED PRODUCTS. DETERMINATION OF THE COPPER CONTENT. FALME ATOMIC ABSORPTION SPETROMETRIC METHOD.

Trace cadmium in soaking solution of domestic ceramics was determined by cold-vapor generation-atomic absorption spectrometry.

The determination of chromium, manganese and nickel in biological agents has obtained by flame atomic absorption spectrometry.

CHEMICAL ANALYSIS OF MANGANESE ORES. DETERMINATION OF COPPER, ZINC AND LEAD. ATOMIC ABSORPTION SPECTROMETRIC METHOD.

A determination of total chromium in environmental samples by flame atomic absorption spectrophotometry was studied.

The copper in electroplating sludge was determined by microwave digestion-atomic absorption spectrometry.

CHEMICAL ANALYSIS OF ALUMINIUM ALLOYS. DETERMINATION OF ANTIMONY. (ATOMIC ABSORPTION METHOD).

CHEMICAL ANALYSIS OF MANGANESE ORES. DETERMINATION OF IRON. ATOMIC ABSORPTION SPECTROMETRIC METHOD.

Ammonium phosphate was adopted as matrix modifier to determinate the lead by graphite furnace atomic absorption spectrometry.

The method for determination magnesium oxide content in zinc concentrates by flame atomic absorption spectrometry is studied.

Objective: To find the metrical uncertainty of determination of manganese in drinking water by lame atomic absorption spectrometric method.

Copper and copper alloys. Determination of nickel content. Flame atomic absorption spectrometric method.

AIR QUALITY. AMBIANT AIR. DETERMINATION OF LEAD IN AIRBORNE PARTICULATE. ATOMIC ABSORPTION SPECTROMETRY.

Iron ores. Determination of aluminium content. Flame atomic absorption spectrometric method.

Testing water. Determination of sodium and potassium. Atomic absorption spectrometry method.

The method for determination of Hg in eels by microwave digestion-hydride generation atomic absorption spectrometry was studied.

Methods Vanadium content in cassia seed was measured by graphite furnace atomic absorption spectrophotometer.

The most frequently used testing method of blood lead is also described: atomic absorption spectrometry and its operative process.

The determination of lead in corn by direct solid sampling-graphite furnace atomic absorption spectrometry was established.

CHEMICAL ANALYSIS OF ZINC. DETERMINATION OF LEAD, CADMIUM, COPPER AND ALUMINIUM. (ATOMIC ABSORPTION METHOD).

COPPER ALLOYS. DETERMINATION OF LEAD CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.

CHEMICAL ANALYSIS OF COPPER ALLOYS. DETERMINATION OF BERYLLIUM. (ATOMIC ABSORPTION METHOD).

Objective The macro mineral and trace mineral in gall were determined and analysed by atomic absorption spectrophotometry.

milk and milk products . determination of zinc content . flame atomic absorption spectrometric method.

Copper and copper alloys. Determination of iron content. Flame atomic absorption spectrometric method.

Put a high concentration of graphite furnace atomic absorption spectrometry method of unleaded gasoline in the lead.

A method for the determination of micro Pb in snow by flow injection-hydride generation-atomic absorption spectrometry has been developed.

SODIUM HYDROXIDE FOR INDUSTRIAL USE. DETERMINATION OF MERCURY CONTENT. FLAMELESS ATOMIC ABSORPTION SPECTROMETRIC METHOD.

IRON ORES. DETERMINATION OF COPPER CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.

Methods: The membrane of red blood cells got broken in low osmotic pressure and zinc was determined by atomic absorption spectroscopy.

Methods: Microwave digestion and atomic absorption spectrophotometer common water Fe and Mn content.

METHODS The contents of the three trace elements were determined by flow injection hydride generation-atomic absorption spectrometry.

The lead in waste gas was traded with microwave digestion and acid digestion, then determined by flame atomic absorption spectrum.

Paints and varnishes. Determination of soluble mercury content. Flameless atomic absorption spectrometric method.

A method for the determination of lead in stibium concentrates by flame atomic absorption spectrometry has been described in this paper.

Methods: After microwave digestion, we determine mercury in marine products by cold atomic absorption method.

Steel and cast iron. Determination of copper content. Flame atomic absorption spectrometric method.

TESTING WATER. DETERMINATION OF CALCIUM AND MAGNESIUM BY ATOMIC ABSORPTION SPECTROMETRY.

CHEMICAL ANALYSIS OF ALUMINIUM ALLOYS. DETERMINATION OF TIN. (ATOMIC ABSORPTION METHOD).

This review has reported recent advance of atomic absorption spectrophotometry in medicine and pharmacy.

FRUITS JUICE AND VEGETABLES JUICE. DETERMINATION OF THE LEAD CONTENT. FLAMELESS ATOMIC ABSORPTION PHOTOMETRY.

Use atomic absorption spectroscopy to determine the content of calcium in kidney.

The analysis method of lead in petrol is studied using graphite furnace atomic absorption spectrometry lead in unleaded gasoline.

CHEMICAL ANALYSIS OF LEAD ALLOYS. DETERMINATION OF ANTIMONY (ATOMIC ABSORPTION METHOD).

CHEMICAL ANALYSIS OF LEAD. DETERMINATION OF ANTIMONY. (ATOMIC ABSORPTION METHOD).

Methods: After microwave digestion, we determined lead in tea by graphite furnace atomic absorption method.

Direct determination of total chromium in water by flame atomic absorption spectrophotometry has been investigated.

After acidifying the solution with HCl, the content of Ga was determined by flame atomic absorption spectrometry(FAAS).

Antimony in the sample solution was determined by Graphite Furnace atomic absorption spectrometry.

The absorbency of lead standard solution was determined with flame atomic absorption spectrometry, and the working curve was made.

NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 1 : GENERAL REQUIREMENTS AND SAMPLE DISSOLUTION.

CHEMICAL ANALYSIS OF LEAD. DETERMINATION OF BISMUTH. (ATOMIC ABSORPTION METHOD).

The trace elements were detected by flame atomic absorption spectrometry(FAAS). And the correlations were analyzed by SPSS.

Food products. Edible gelatine. Determination of copper, lead, iron and zinc contents by atomic absorption spectrophomometry-.

Methods: Wetnitration and flame atomic absorption spectrophotometry were employed. Results: Plumbum and Cadmium were not detected.

ATOMIC ABSORPTION SPECTROSCOPY. GENERAL APPROACH TO PRACTICE.

A new measure method of cadmium bismuth copper lead and iron in refined antimony by atomic absorption spectrophotometer was present.

CHEMICAL ANALYSIS OF MANGANESE ORES. DETERMINATION OF ALUMINA, LIME AND MAGNESIA ATOMIC ABSORPTION SPECTROMETRIE METHOD.

CHEMICAL ANALYSIS OF LEAD. DETERMINATION OF CADMIUM (ATOMIC ABSORPTION METHOD).

A determination of trace manganese in drink water by flame atomic absorption method using iron lamp as light resource has been investigated.

glass . resistance to attack by hydrochloric acid at 100 degrees celsius . flame emission or flame atomic absorption spectrometric method.

CHEMICAL ANALYSIS OF LEAD. DETERMINATION OF COPPER (ATOMIC ABSORPTION METHOD).

NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 6 : DETERMINATION OF MANGANESE CONTENT.

Rubber. Determination of metal content by atomic absorption spectrometry. Part 4 : determination of manganese content.

The organic layer in the neck of the flask is aspirated into the atomic absorption burner.

SODIUM HYDROXYDE FOR INDUSTRIAL USE. DETERMINATION OF CALCIUM AND MAGNESIUM CONTENTS. FLAME ATOMIC ABSORPTION METHOD.

NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 3 : DETERMINATION OF CHROMIUM CONTENT.

Mn, Mg and Fe had serious disturbances on the determination of Pb in waste water by atomic absorption spectrometry.

Zinc and body fat contents were determined by atomic absorption spectrometer and gravimetrically, respectively.

PAINTS AND VARNISHES. DETERMINATION OF TOTAL LEAD. FLAME ATOMIC ABSORPTION METHOD.

CHEMICAL ANALYSIS OF LEAD. DETERMINATION OF ZINC (ATOMIC ABSORPTION METHOD).

Methods The trace element zinc was detected by the atomic absorption technique.

Rubber. Determination of metal content by atomic absorption spectrometry. Part 3 : determination of copper content.

Objective To solve the problem of low and unsteady signal that produced by flame atomic absorption spectrophotometer.

NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 4 : DETERMINATION OF COPPER CONTENT.

NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 2 : DETERMINATION OF COBALT CONTENT.

Determination of Coper, Iron and Zinc in fuse by flame atomic absorption spectrometry was studied .

It is simple and quick to determine trace Pb and Bi in pure copper using the graphite furnace atomic absorption spectrophotometry.

COAL AND COKE. DETERMINATION OF ASHES CONTENT BY ATOMIC ABSORPTION OR PLASMA SPECTROMETRY.

A indirect method of atomic absorption spectrophotometry to measure trace iodide is proposed.

Objective To explore a method for determination of tr ace Pb in water by graphite furnace atomic absorption.

The content of lead in 24 species Chinese medicinal materials in Anhui province was determined by atomic absorption spectrometry(AAS).

Zinc and zinc alloys - Chemical analysis - Part 6 : determination of aluminium and iron by atomic absorption spectrometry.

Atomic absorption spectrophotometry is a relatively new method of analysis.

NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 5 : DETERMINATION OF IRON CONTENT.

A method of ultimate precision in flame atomic absorption spectrophotometry (FAAS) and applicable practice are introduced in this peper.

The content of 6 elements in Dahuang and its processed products was determined by flame atomic absorption spectrometry(FAAS).

The content of hair zinc and copper of 52 cases of children with anorectic was determined by atomic absorption spectrophotometry .

Methods: Zinc (Zn), calcium (Ca) and iron (Fe) of 804 children were determined by atomic absorption spectrophotometer.

Atomic absorption instrument is arranged above the exhaust hood.

Methods: The method of atomic absorption spectrophotometry was used.

The direct determination of Ca in urine by atomic absorption spectrometry is described in the present paper.

PAINTS AND VARNISCHES. DETERMINATION OF TOTAL MERCURY. FLAMELESS ATOMIC ABSORPTION SPECTROSCOPIC METHOD.

Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 1 : general requirements.

The content of K~ in low-sodium salt was first determined by atomic absorption method.

Method Zinc soaked in 4% HAc solution was determined by flame atomic absorption spectrometry.

01%, is suitable to be determined by atomic absorption method at wave length 330.

A new method for direct determination of total chromium in poly aluminium chlode by flame atomic absorption has been established.

A method for the determination of titanium in aluminum alloy by N2O-C2H2 flame atomic absorption spectrometry is studied.

The K, Na in hydrazine hydrate are determinated by Flame Photometry, Ca, Mg are determinated by Flame atomic absorption spectrometry.

Vitamin B1 indirectly by atomic absorption spectroscopy is proposed.

This article inducts that we can determine mercury in food by combine atomic-absorption spectrometer with hydride generator.

Adsorption Cd2 Use the atomic absorption spectrometer about group water Cd2 were determined.

A method for the determination of cobalt in pure nickel by N2O-C2H2 flame atomic absorption spectrometry has been proposed.

The trace copper is extracted in organic phase and separated from the TiO 2 base, then determined by use of atomic absorption spectrometry.

The application of N2O-C2H2 flame atomic absorption spectrometer to measure of Cobalt in The expanded alloy is studied.

A new method of N2O-C2H2 flame atomic absorption spectrometry to measure iron content in the pure silver of silver-zinc cell was studied.

The development of the multidentate complexes applied in the atomic absorption spectrometry has been reviewed.

The content of 10 trace elements in Euphorbia fischeriana Steud was determined by atomic absorption spectrometry.

The contents of zinc, copper and iron of 63 different kinds of foods in Jinn were determined by flame atomic absorption spectrophotometer.

The content of 5 trace elements in 7 kinds of cigarettes was determined by atomic absorption spectrometry.

The development of analytical techniques of flame atomic absorption spectrometry in China sice 1963 is reviewed with 163 references.

Aluminium oxide primarily used for the production of aluminium; Determination of manganese content; Flame atomic absorption method

Determination of Barium in the Surface Water by Graphite Furnace Atomic Absorption Spectrometry

Discussion on determination of total lead in blood by an Electrothermal Atomic Absorption Spectrophotometer

Determination of Arsenic in Blood by an Electrothermal Atomic Absorption Spectrophotometer

Measuring Ferrous Content in Active Carbon by the Means of Microwave Ashing-Flame Atomic Absorption Spectrometry

A study of the analytical method for indirect determination of cephalosporins by atomic absorption spectrometry

Study of Sensitivity Enhancement by Microemulsion in Flame Atomic Absorption Spectrophotometry

Liquid membrane enrichment of trace Nickel in environmental samples and its determination by flame atomic absorption spectrophotometry

Graphite furnace atomic absorption spectrophotometric determination of Tellurium and its compounds in workplace air

Workplace air--Determination of manganese and its compounds Flame atomic absorption spectrophotometric method

Magnesite refractories--Determination of manganese oxide content--Atomic absorption spectrophotometric method

Magnesite-chrome refractories--Determination of manganese oxide content--Atomic absorption spectrophotometric method

Metallurgical-grade fluorspar; determination of antimony content; solvent extraction atomic absorption spectrometric method

Determination of lead in dinosaur fossil and its adjoining rock by electrothermal atomization atomic absorption spectrometry

The software design of digital processing for a radio-frequency powered hollow cathode lamp atomic absorption spectrometer

Workplace air--Determination of nickel and its compounds--Flame atomic absorption spectrophotometric method

Workplace air--Determination of cobalt and its compounds--Flame atomic absorption spectrophotometric method

determination of microelements in tea and its cultivating soil by microwave digestion - atomic absorption spectrometry

Study of the Determination of Mercurywith Organic Matrix Modifier by Graphite Furnace Atomic Absorption Spectrometry

Analytical spectroscopic methods; Flame emission, atomic absorption, and atomic fluorescence; Vocabulary Bilingual edition

Magnesite-chrome refractories--Determination of potassium oxide and sodium oxide contents--Atomic absorption spectrophotometric method

Nickel--Determination of arsenic, antimony, bismuth, tin and lead contents--Electrothermal atomic absorption spectrophotometric method

Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electrothermal atomic absorption spectrometric method

Fast determination of total mercury in aquatic products by thermal oxygenated decomposition-amalgamation-atomic absorption spectrophotometer

Magnesite refractories--Determination of potassium oxide and sodium oxide contents--atomic absorption spectrophotometric method

Silica refractories--Determination of manganese oxide content--Atomic absorption spectrophotometric method

Testing of liquid fuels; determination of the sodium content, determination by atomic absorption spectroscopy after incineration

Method for the determination of the iron, copper, manganese, zinc and magnesium in feedstuffs--Atomic absorption spectroscopy

Metallurgical-grade fluorspar; determination of lead content; solvent extraction atomic absorption spectrometric method

Liquid Membrane Enrichment of Trace Silver and Its Determination by Flame Atomic Absorption Spectrophotometry

Methods for chemical analysis of molybdenum--The atomic absorption spectrophotometric method for the determination of magnesium content

Ambient air; determination of the particulate lead content of aerosols collected on filters; atomic absorption spectrometric method

Estimating Interference Circumstances of Atomic Absorption Spectrophotometry by Solution Dilution

Steel - Determination of antimony content - Electrothermal atomic absorption spectrometric method

Methods for chemical analysis of lead concentrates--The atomic absorption spectrophotometric method for the determination of copper content

Silica refractories--Determination of calcium oxide content and magnesium oxide--Atomic absorption spectrophotometric method

Comparison of Two Methods to Determine Iron Content in Wine by Atomic Absorption Spectrometer

Cryolite, natural and artificial; Determination of sodium content; Flame emission and atomic absorption spectrophotometric methods

Liquid membrane separation and enrichment of trace lead and its determination by flame atomic absorption spectrometry

Determination of arsenic in lead ingots with a flow injection quartz tube atomic absorption spectrometry

Methods for chemical analysis of ferrotungsten The flame atomic absorption spectrometric method for the determination of manganese content

Methods for chemical analysis of ferrosilicon--The flame atomic absorption spectrometric method for the determination of aluminium content

Recent Developments of the Atomization Kinetics in Electrothermal Atomic Absorption Spectrometry

Determination of the Content of Zinc Oxide in Its Liquid by the Method of Atomic Absorption Spectrophotometry

Determination of Trace Elements in Traditional Chinese Medicines by Microwave Digestion-graphite Furnace Atomic Absorption Spectrometry

Workplace air--Determination of antimony and its compounds--Flame atomic absorption spectroscopy

Determination of Aluminium in Compound Aluminium Hydroxide Tablets Using Enhanced Flame Atomic Absorption Spectrophotometry

Aluminium and aluminium alloys; Determination of magnesium; Atomic absorption spectrophotometric method

Methods for chemical analysis of bismuth--Determination of silver and cadmium content--Electrothermal atomic absorption spectrometric method

Workplace air--Determination of tin and its inorganic compounds--Flame atomic absorption spectroscopy

Failure Analysis of Determination of Heavy Metal with Atomic Absorption Spectrophotometer and its Recovery

Methods for chemical analysis of lead concentrates? Determination of silver content? Flame atomic absorption spectrophotometric method

Nickel--Determination of cadmium, cobalt, copper, manganese, lead and zinc contents--Flame atomic absorption spectrophotometric method

Methods for chemical analysis of bismuth--Determination of nickel content--Electrothermal atomic absorption spectrometric method

Comparison between anodic stripping voltammetry and graphite furnace atomic absorption spectrophotometry for blood lead analysis

Microwave Airtight Digestion-An Atomic Absorption Spectrophotometric Method for the Determination of Cadmium in Foodstuff

Copper sulfide concentrates - Determination of gold and silver contents - Fire assay gravimetric and atomic absorption spectrometric method

Orthogonal Polynomial Regression Design for Interference Elimination in Atomic Absorption Spectrometry

Direct Determination of Nickel and Manganese in Cobalt Naphthenate by Microemulsion Flame Atomic Absorption Spectrophotometric Method

Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method

Graphite Furnace Atomic Absorption Spectrophotometer in Detecting Beryllium in the Air of Workplaces

Zinc sulfide concentrates - Determination of silver content - Acid dissolution and flame atomic absorption spectrometric method

Pulps; Determination of manganese content; Sodium periodate photometric and flame atomic absorption spectrometric methods

Determination of arsenic in Tricholoma giganteum by microwave digestion hydride generation atomic absorption spectrometry

Exploration on quantitative adjusting curve to determine lead content in tea pro ducts by atomic absorption spectrography

Municipal domestic refuse. Determination of mercury. Cold atomic absorption spectrophotometric method

Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique)

Ferrosilicon; determination of aluminium content; Flame atomic absorption spectrometric method

Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment

Manganese ores and concentrates; Determination of aluminium, copper, lead and zinc contents; Flame atomic absorption spectrometric method

Manganese ores and concentrates; Determination of calcium and magnesium contents; Flame atomic absorption spectrometric method