axle

Daimler-Benz owned the company then and had the good grace to place the Chrysler chassis on a Mercedes axle and, man, was that a sweet ride!

As shown in the side view above, both angle extrusion arms are situated flush with the bottom of the Axle mount.

Adjust the elevation of the front bearing housing, to ensure the axle neck up-rising to be zero.

Additionally, the newly designed front optimizes the air flow and reduces the lifting forces at the front axle.

The frame consists of TWO straight pressed-steel members, five cross members, the front axle, the rear axle and four wheels.

This new technique even can be employed to measure the surface strain field in a rotary wing, a rotary axle or a flywheel.

One end of the rotation axle is connected with an electromagnet by a pull rod and a weight rod.

The length of the wheel axle was also unified and expressways standardized to ease transportation throughout the country.

Each wheel is provided with its own separate half-shaft connected by a differential gear and meeting at about the center of the axle.

If all the weight is placed well below the axle, the trike is going to have excellent handling regardless of weight distribution.

These systems are used with the wheelsets in-situ on the train -normally only the axle end caps have to be removed.

This selected works have fetched one of the important parts of the internal-combustion engine the bent axle is analysed and researched .

The bus had stopped at a railroad crossing after its axle broke and was hit by the train, an official said.

A piece of axle is arranged in a hole. At the centre and the sides, a hole for axle and a hole for fixing screw are respectively arranged.

The shaft must be strong enough to deliver this twisting force to a loaded axle without deforming or cracking under the strain.

Each guided device is connected in a relatively rotatable fashion about a lateral axle to the lower part of a vertical shaft.

One end of a sliding axle of the balance bridge is fixed on the stander. The sliding axle is movably connected with the balance bridge.

The stabilizer bar under the wishbones of the front axle prevents trike and rider from leaning outward excessively in fast cornering.

The tensing member includes one ratchet and one wheel axle inserted into the center of the ratchet and with one axial notch.

This paper puts forward centripetal suspension design idea in allusion to defect of the general double axle suspension of semi trailer.

Be careful with cross-axle diff locks though as, particularly on the front axle, they severely limit your ability to steer.

The key guard is an organizer and commander of a team; an assistant of the coach, an axle center of the tactic changes and attack rhythm.

A pole connecting the rear axle of a vehicle with the front.

Hence, this type of axle housing is commonly referred to as a banjo type axle housing.

It was prettily devised of Aesop: the fly sat upon the axle-tree of the chariot wheel and said: "What a dust do I raise? "

They're trying all ways possible to put pressure on American Axle, having found themselves at a disadvantageous position in that strike.

The key difference between the new A5 and the rest of Audi's lineup is that the engine will now be placed behind the front axle.

The shaft, (axle) of an automobile fits through the bore of a cone of the tapered roller bearing.

A solid disk or a rigid circular ring connected by spokes to a hub, designed to turn around an axle passed through the center.

All along, the string was tied to the axle, causing the spinning disks to return up the cord immediately after they hit bottom.

The results show that the system is helpful for realizing the knowledge management and intellectualized design of automotive drive axle.

Driving gear unit is fixed on truck with help of flange and operates as an axle of the truck as well as transmission and driving motor.

The ends of the blue bars are attached to the chassis. Note how the axle is free to move up and down, but it can't move side-to-side.

The flow of each axle bush applies speed control valve to regulate, with high precision and low interference effect.

The accident that the axle bush was burns away is averted, the efficiency production is increased and a good effect is obtained.

The utility model provides a radial adjustable core axle, relating to an improvement of a cylindrical grinding fixture of ring-class parts.

On all vehicles it is important to remember that the rear axle dictates the position of the front wheels.

In all the car is important that the rear axle of the front position.

The packing axle seal of the melt urea pump leaked seriously, leading to many harmful effects, so we revamped the form of axle seal.

Pneumatic unload, air expansion axle fixed position, at two rewinding central enclosing roll, at fixed trough go up and down.

For the combine tire assembly, the current approach is to use manual labor to carry the tire to the axle, and then locate assembly.

The plastic limit analysis and parametric design of a hollow cast steel roll with axle sleeve of the high-speed paper machine are studied.

The permitted gross vehicle weight and maximum permitted axle weights of a goods vehicle are marked on either side of the vehicle.

The article introduces the structure feature and heat treatment technology of a low vacuum nitriding furnace for treating axle work pieces.

His absolute authority and rule over His creation is the axle around which all of His other attributes revolve.

On the horizontal projection plane, an included angle is formed between the thrusting bars and the longitudinal center line of the axle.

Its major products include rigid axle, steering axle, tandem axletridem axles used for varies of wheeled vehicles.

The bad news is that it wrapped around the axle and threw the car down an embankment, head-on into a tree.

The solid axle suspension uses a solid steel dead axle (does not turn with wheels) with a leaf spring at each side.

Analysis results indicate that the intensity and rigidity of this drive axle housing is enough, fatigue life reach the national standard.

Thus the wheel and axle came into being, and with them the first carts.

Its major products include rigid axle, steering axle, tandem axle and tridem axles used for varies of wheeled vehicles.

The paper gives detailed description of the improved design for wet drive axle used in motor grader of Sichuan Chengdu Chenggong .

This paper introduces the design plan of a coupling for high precision axle-angle position coder, the rigidity is small except torsional.

The increase of axle load and track regularity are the key factors affecting the dynamic stress of subgrade as the speed of train increases.

I can always do that I can drill a hole have an axle, nicely frictionless bearing and I can force it to rotate about that.

The two impellers are arranged at the lower end of the axle sleeve to ensure moderate air-draft amount.

The gas flows through curved vanes or rotors on an axle, causing the axle to turn.

This electric motor powers the third axle right at the rear of the vehicle, while the front and middle axles are combustion engine powered.

the spherical hinge axle is articulated and matched with the spherical hinge sleeve through a spherical curved surface.

A friction plate with a hole for connecting piece of axle is superposed on the armature.

The vibration of micro vehicle rear axle main producer is one of main affecting comfortable factors.

An ultra-fine roll mill comprises a base, a host cylinder, a centre axle, a bracket, a grinding ring and a grinding roller device.

The present invention also provides for reducing load concentration on an interface between a pedestal roof and an axle.

The analytical findings provide some referential basis for the design of a rear axle housing structure.

Where coil, torsion bar or air springs are used, which of course cannot locate the axle, other measures have to be introduced.

On frame-type vehicles, two-wheel alignments are taken from the frame and the rear axle is assumed to be in correct alignment.

Anhui Axle Company is a memory with a long history, profound cultural background of the auto-parts manufacturers.

In this cavern are three massive stone wheels, each with a huge pole through its centre as an axle.

The author uses the multi-axle strength criterion, which can bitterly reflect true working state of the arch dams.

It was mainly used in the oil seal, O ring and gasket etc. of automobile engine, transmission system and wheel axle.

The front axle load determines which of the three different power-steering systems are used.

The process analysis, key equipment selection, and index of technical economy about one axle production line of lorry have been introduced.

Designed without axle sleeve. The body is completely sealed to protect the liquid from leaking.

The road wheel is connected with the soleplate through an axle and a bearing bracket.

The guiding gear's central line must be vertical with the central point of the roller's central axle line.

The rotational axle of a first roller has a fixed mounting whilst the rotational axle of a second roller has a displaceable mounting.

It smelled of grain and of harness dressing and of axle grease and of rubber boots and of new rope.

In spite of these checks, there were occasional and sometimes spectacular accidents due to wheel or axle fractures on trains in service.

aircraft ground support equipment - specific requirements - aircraft jacks , axle jacks , and hydraulic tail stanchions.

For preventing the transmission of shock from uneven road surfaces to the vehicle, springs are used to support the vehicle on the axle.

Automotive drive axle of the main reducer and differential assembly is a key automotive power train components.

The differential is part of the rear-axle-housing assembly, which includes the differential, rear axles, wheels, and bearings.

O we with the regenerate altering the religion through the whole island, track and moved no more, its rear axle snapped striven?

If the old axle hole in the correct position to connect the center of the color stick as the center of drilling.

Because of inertia, the front and rear axle load will shift when a vehicle braking.

The note pressing wheel axle is also provided with a coded disc and an auxiliary coded disc relative pipe.

RAILWAY TRANSPORT EQUIPMENT. TWO AXLE CARRYING BOGIE FRAMES. DETERMINATION OF REFERENCE ELEMENTS. GEOMETRICAL CHECKS.

Just insert axle into one of the three precision-machined openings and tighten in a bench vise.

Main structures are: power transmission system, hydraulic system, electric system, work attachment, compartment, and front axle etc.

The population spatial distribution took on the form of "pole-axle-circle" pattern.

The manual transmission also comes with specific gear ratios, while automatic models get a modified rear axle ratio.

It stood 80 meters tall, and its 70-ton axle was the largest piece of steel ever created.

Double semi axle design, streamlined disc will increase the flow of medium, so the flow resistance will be smaller.

The valve is mainly made up of body, disc, axle, rocker and heavy hammer etc. It realizes discharging and air locking using trimming moment.

The rear axle delivers an equal amount of torque to Both axle shafts through a differential.

closes the right eye, rotates the middle axle focusing handwheel, looks until the left eye by the clear scenery.

The entire scenic area is by the male danger, but winding northwest - southeast to the canyon is the main axle.

A set of automatic ultrasonic testing system for the huge rotatable axle was researched, based on non-contact ultrasonic testing theory.

Thus, rotation of the differential by the drive shaft causes corresponding rotation of the axle shafts.

We are going to have the central wheel assembly replaced . please get me tow axle jacks.

In the framework of types of vehicles, two wheels at the line was taken from the frame and rear axle in the right assumptions at the line.

The suspension can turn winding it's axle line, the wire rope winding on the rope roller drive the suspension tools by the suspension shaft.

Current palliative measures against fretting damage of the axle have been reviewed and some suggestions have been put forward.

Stomp the throttle at the apex of a 90-degree turn and you'll hear lots of front-inside wheel spin thanks to the open diffs on each axle.

This is a reference unit to determine the average loading on a pavement by what is known as the standard axle.

Soon all the snow had melted and the German panzers and trucks were axle-deep in mud.

Within a short time, investigators locate the axle of a truck that was blown nearly 600 feet away from the federal building.

It also can be significant to enhancing front axle's security, reducing enterprise's design and the experiment cost.

According to structural feature of the roller and its axle in rotary kiln, a finite element model of roller-to-axle contact was developed.

But the European Jetta keeps the Golf's multilink rear axle; U. S. models get a specially developed torsion-beam rear axle.

and wherein said yoke axle of said second universal joint yoke assembly is coupled at a right angle to said second elevator hinge.

Railway transport equipment. Rolling bearings for railway axle-boxes. Acceptance inspection.

There is usually one traction motor on each driven axle.

This differential assembly fits between the axle shafts, with the shafts being splined to the differential side gears.

The paper discusses the geodynamic challenges in high speed and high axle load railway projects, especially for soft ground conditions.

The tube yokes are connected through universal joints to end yokes on the output and input shafts of the transmission and axle.

The belt knife storehouse numerical control engine bed key lies in the manipulator and the main axle trades the knife automatically.

The brake lever axle hole should be pointing towards the top of the kingpin.

The load on a bearing perpendicular to the axle, this and the Thrust load are forces that affect the design and application of bearings.

Through to the main axle common breakdown's diagnosis and the analysis, studies grasps the trouble clearing the method.

Electromagnetic clutch, quick and smooth coupled-axle transmission, quick speed, low noise, low wear and tear, and low breakdown rate.

The difference in effect of motor preposition or postposition on axle weight transfer suspended on frame is not obvious.

Products include different sized lower clip, curve clip axle center, and maybe cooperated with import ground spring for operation.

Stepless adjustment and positioning of axle, for the different floor grinding intensity effects.

The differential case is assembled on the left axle But can rotate on a bearing independently of the axle .

The suspension system of claim 1, further including an upper torque rod linking said axle to one of said cross frame members.

Engineers have fitted VW's Variant 1 stainless steel suspension upgrade, which lowers the car at either axle by up to 50mm.

Assembling, incl. chassis measuringStabilizerImproved stabilizer for front axle.

A semi-annular bearing with an opening is used to support both ends of inside engaged gear or for fixed-axle gear box.

The quenching distortion of rear axle spiral bevel gear used in FLAT tractor is studied in this paper.

In contrast to the RMR layout, however, the center of gravity of the engine itself is actually past the rear axle.

The thermal insulation water wall blind formed by waterproof cloth and water bag is connected to the main axle.

The axle-load mass of vehicles running on roads should conform to the technical standards as set by road engineering requirements.

the axle shaft end up the chain of boxes to continue a small sprocket rotation axis.

Application of the algorithm in vehicle drive axle fault detection indicated that the exactness amounted to 95%.

Company specialize in automobile fittings, sandy beach car rear axle always succeeding and auxiliary products.

Confucius also said that an untrustworthy person is like two wheels without the axle to lock them in place-how could they support the cart?

The rim supports the weight of the bicycle and it's rider through the thin wire spokes that connect it to the axle.

The cardan shaft of the original power axle of F500 mud pump set frequently destroyed by the torsional vibration of the power axis.

the measuring accuracy is high, especially suits the great size axle diameter's survey.

Therefore, medium carbon steel is suggested for the material of railway axle when the steel can meet the requirement of strength design.

A spindle or an axle used to secure or support material being machined or milled.

To be sustained or supported on a pivot , an axle, or another point .

The selection method of roll forging process parameters of middle tonnage automobile front axle and die design outline were stressed.

Thus, the side gear on the outer-wheel axle turns more rapidly than the side gear on the inner-wheel axle.

RAILWAY ROLLING STOCK. ROLLER BEARING AXLE BOXES FOR OUTSIDE AXLE JOURNALS. TOLERANCES. SURFACE FINISH.

Properties of manufactured bi-metallic squeezing axle had achieved or surpassed the fixed requirements.

A super precise optical odometer built to slide on the robot's axle does not fit together properly.

"wheel" is a mechanical rotating around the axle.

the major part of pump have : Pump aspect , impeller , pump axle and close and outstanding frames of machinery etc .

aircraft ground support equipment - specific requirements - part 19 : aircraft jacks , axle jacks and hydraulic tail stanchions.

The work principle and technical advantages of two-axle roll bending with elastic medium(RSEM) are described.

This "split wishbone" design lowered the front axle about 1 inch (2. 5 cm) and improved vehicle handling.

Properties of manufactured twin metals squeezing axle had achieved or surpassed to fixed requirements.

Hydraulic feeding, air expansion axle fixed position, central roll placing, safe clamping chuck fixed.

radius arms , cross members , radius arm brackets and cross member brackets rebuilt or modified for new axle locations.

This system monitors the state of bogie, wheel, axle box, coupler and pantograph based on the the requirements of maintenance.

For surfacing welding or repair the wear out face made by low carbon steels and middle carbon steels, as axle, gear and blade of mixer.

of the main driver axle. Knowing this dimension, as well as.

RAILWAY ROLLING STOCK. TESTS METHOD OF GREASES FOR AXLE-BOXES TO ROLLING BEARINGS. DYNAMIC TEST FOR STABILITY TO OXYDATION OF GREASE.

The driving device consists of battery, motor, transmission shaft, rear axle, magneto generator.

the axle of a self-propelled vehicle that provides the driving power.

The rotation axle is horizontally provided with a valve plate.

Install differential case and dummy bearings in axle housing (without shims) and tighten retaining cap bolts.

A disproportionately high percentage of the damage to road infrastructure is caused by trucks with axle loads higher than legally permitted.

In this paper, the author introduces the normal causes for oil leak in rear axle of minibuses and methods of prevention and shooting.

The result shows that the objection left during the machining of the axle lead to the notch sensitivity of the axle.

RAILWAY ROLLING STOCK. ROLLER BEARING AXLE BOXES FOR OUTSIDE AXLE JOURNALS. MATERIALS. QUALITY.

RUGGEDNESS . Automotive ring gear differential. Axle shafts on roller bearings.

For connecting the output shaft of the gear box to the rear axle, a ling shaft known as propeller shaft is used.

concept car featured a rear-mounted engine spinning the rear axle but this option was ruled out due to cost.

Axle heat damage caused by a wheel bearing fracture may lead to such a condition.

There is a strechable U- shaped structure in the center of the axle supporting the body when the cart in stationary .

Solar wheel axle module is an essential part and parcel of transmission system.

There are two Basic types of axle : dead axles and live axle. The dead axle does not rotate; the wheel rotates on it.

The circular outer part of a wheel, furthest from the axle.

The above fourth method for manufacturing the banjo type axle housings is relatively simple and efficient.

Place riding-type stresses on the wheel by squeezing spokes or rolling the wheel while holding the axle and pressing down.

The present invention discloses an integrated extruding method for producing automobile axle shell.

Furthermore, the crack resistance is affected by temperature drop range and axle load difference.

The requirements on steel types and features of wheels with increase of axle load of heavy haul vehicles are discussed.

The joint of robot usually adopts two linked single axle joint that hass non-powerful bionic characteristics.

The rate which the axle turns is calibrated to the velocity of the flowing gas.

Upgraded suspension of ST road car includes revised front knuckles and strengthened twist beam rear axle.

The "AP" Bearing also contains a spacer, seal, seal wear rings, axle end cap, cap screws, locking plate and backing ring.

Clearly the member B will transmit the thrust from the axle to the frame and will also take the torque reaction.

The wheel and axle is really a sort of lever.

High carbon value prevent high sulphur engine axle bush that diesel oil lead to the fact from corrode wearing and tearing .

the drive axle of motor is equipped with two belt wheels which are connected with said two drive wheels through drive belt.

An eccentric wheel can cause extreme loads on the wheel, axle, bearing and suspension, leading to failures.

Gross vehicle or axle weight includes the weight of the vehicle and any passengers and load etc.

chain will be broken out; or the axle shaft end up the chain of boxes, so that the chain axis from the hole leakage, taking the chain off.

The wheel swivel on each end via a pivot arrangement between the axle and the wheel spindle .

The wheels swivel on each end via a pivot arrangement between the axle and the wheel spindle.

RAILWAY ROLLING STOCK. METHOD OF TESTING ROLLING BEARINGS FOR AXLE-BOXES. ENDURING TEST ON AXLE BOXES TEST MACHINE.

With heavy-duty specific drive axle, own the ability to overcome obstacles, high load-carrying capacity.

DiGiovanni said the American Axle strike has cost GM some fleet sales, which amount to about 7, 000 to 10, 000 vehicles.

The turbodiesel engine can be shut off, leaving the car powered by the third axle alone, allowing a zero emissions drive.

RAILWAY ROLLING STOCK. ROLLER-BEARING AXLE-BOXES FOR WHEELSETS WITH OUTSIDE AXLE-JOURNALS.

The two walkouts are in addition to a long strike at one of G. M. 's parts suppliers, American Axle and Manufacturing, which forced G.

Lehman Brothers singles out American Axle, Lear and Tenneco as most vulnerable among GM's tier one suppliers.

If you are referring to calibration and gain - The Committee is assuming that the axle being measured is uniform.

When the wheel is done the rim should be centered between the axle locknuts.

chain so that axle shaft hole-side up there will be a new chain from the hole to put in.

RAILWAY ROLLING STOCK. METHOD OF TESTING ROLLER BEARING AXLE-BOX CASES. THERMAL TEST ON AXLE BOXES TEST MACHINE.

If I can increase the torque by putting some weight here on the axle, I have this. . .

This system can detect the traffic load parameters e. g. speed, axle load, complete weight, axle base, etc.

Critical plane criteria is applied to analyze the axle housing.

The axle is self-lubricating axle and with hole for rotor axle rod throughing.

CYCLES. PEDAL AXLE AND CRANK ASSEMBLY WITH SQUARE END FITTING. ASSEMBLY DIMENSIONS.

"Grand Army" brand brake products with more than cars chassis plant supporting axle.

Slide plate with twisting force axle and forcedly simultaneous structure.

Clean all surfaces around axle mount portion and Faceplate using a stainless steel brush.

When the axle journal and work parts, mouth worn compression will immediately let, producing a sliding off, cause ink.

This paper particularly analyzes steering of Mid-position cylinder for axle using the method of conversion cartesian coordinate.

The four-axle 3D numerical controlled rolling-forging machining technology for die impression is studied and developed.

But the axle load, high-density traffic put forward higher requirements on railway alignment.

METAL-HOSE CLAMPS FOR GENERAL PURPOSES ; BAND TYPE, WITHOUT SCREWS, RE-USABLE, PIN OR AXLE CLAMPS.

shaft shortens as the angle increases is that the rear axle and differential move in a shorter ARC than the propeller shaft.

Check the seal condition of rotating axle regularly and exchange or fill with graphite filler.

Aimed at the wear problem of roll axle neck, failure analysis and rebuilding were made for multi-roller mill.

The preliminary bracing and temporary construction are simulated with space iso-parametric shell element that can bear axle bending.

axle suspension uses a solid steel dead axle(does not turn with wheels)withaleaf spring at each side.

American Axle & Manufacturing Holdings Inc.

Four wheel drive, with a full sealed front drive axle.

The suspension system of claim 3, further including a torque rod linking said lower axle cap to a hanger on said chassis.

The ellipse edge of the casting was revised to round-like edge of vertical well axle based on geometric rectification technology.

Product Specification : Hub bolt for FUHUA axle, with alloy steel structure.

Self-made Axle and balance box can guarantee the stable power output and reliability. . .

With coil springs, the rear-suspension system requires some method of holding the axle housing in place.

The present invention provides the inner high pressure and reducing formation process of automobile axle shell.

Using the hexagonal head bolt to fasten the axle clamp shrunk to narrow seam to hold the axle center firmly.

The utility model is mainly applied in metering pump driving axle of spinning equipment.

All rig tests of fatigue life, tension intensity, bending intensity for auto drive axle.

Weight was also saved through use of aluminum in the hood, rear hatch, front suspension axle, and brake calipers .

The source of vibration excitation is divided into two components: the axle load and the roughness-induced dynamic loads.

A new plate cutting machine with single axle and asymmetric negative offset is introduced.

Fig. 14 shows the deformation and stress distribution of frames when the center axle wheel gets over the block.

When tire slippage is detected, as much as 100 percent of available torque is instantly routed to the axle with the most traction.

detected on a nose landing gear axle, repair or replace the axle or inner cylinder.

Usual plate gear have big diameter, but thin in depth, and have a axle hole in the center, so it can be simplified into a thin disc ring.

Then, the sample data and the block data in the new coordinate system are sequenced along axle direction.

the steering angle of the first axle has little effect on instantaneous turning center.

The causations of crack initiation in a right landing chassis wheel axle were analyzed.

Meanwhile, a thick axle would hugely increase the amount of friction.

B. Auto industry: steel ring, vehicle body, chasis, axle housing, oil tank, door, etc.

Quadra-Trac II offers a two-speed transfer case and the ability to direct 100 percent of the available torque to either axle.

Axles Heavy duty and reliable axles designed with advanced Cheng Gong Series 50 axle technology. Key seals are imported.

a flange is fixedly connected on the driving axle, and the flange is connected with the roller.