axial load

Self-aligning bearings have high radial load capacity and to adapt to a number of both radial and axial load of a mixed load.

Tests results show that the bearing capacity of the columns increases, but the ductility decreases with an increase of axial load ratio.

Slewing ring bearing( slewing bearing), is a bearing that able to bear axial load, radial load and overturning torque.

With this situation, any amount of axial load can be applied to compressive bar of arbitrary length without bending.

Tangent modulus theory was introduced to determine the stability capacity of this new type of composite columns subjected to axial load.

Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.

This paper investigates behaviors of the restrained column under axial load in fire through using a calibrated finite element method model.

If the actual load is a combined radial and axial load , then an equivalent static bearing load must be calculated .

In the range of research, the tubing failure is not strength calculation problem under internal pressure and axial load.

This type of bearings is separable , which can only carry axial load .

After failure of the reinforced concrete, the concrete-filled steel tube can still bear the axial load and deformation.

therefore, this paper focuses on the shear lag effect of box girder in the state of transverse and axial load.

The results show that increasing the boundary confinement ratio of the walls can raise allowable axial load ratio.

Axial-load ratio is a vital element affecting the seismic behavior of the shear wall and deciding its ductility .

Double row tapered roller bearings can accommodate simultaneously radial load and also axial load in double directions.

The distribution curve of axial load and preload-torque is obtained, and the computed torque coefficient is reasonable and accurate.

The radial load is divided equally over the two bearings ; the axial load is shared according to the bearing arrangement.

Self-aligning ball bearings may withstand the big radial direction load, also can withstand the axial load.

This separable bearing can support axial load with low limit rotation speed, and has single and double direction two kinds.

Thrust ball bearing is separable bearing and only can be subject to axial load.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 6405 : optical elements - Axial load.

On the base of other isolation lead-rubber bearings, a new bearing model including the axial-load effect is developed.

However, the radial load must not exceed 50 % of the simultaneously acting axial load.

Based on the ultimate equilibrium theory, the ultimate cross-section bearing capacity formula of the column under axial-load was given.

The axial load in the tripod of the solar array can increase the swaying frequency largely.

the stress-strain curve of composite material compressed under axial load is analysed.

Axial load was not considered to have a clinically relevant effect on spinal canal diameters.

Furthermore, a cut out test procedure with dynamic axial load testing was performed.

Can bear radial load and two direction of axial load.

The actual axial load Fa must not exceed the value given in table 1 for the permissible axial load.

The effect of axial load series of train and the distribution of load by the rigidity of track of support is noticed.

Other test parameters include the level of axial load in the CFST column, the load level in the RC beam and the beam-column stiffness ratio.

The 30-50% higher compressive strength for central rather than for peripheral trabecular bone adapts to the shifts in axial load.

OBJECTIVE: To investigate the impact of axial load on lumbar dural sac.

These bearings have a particularly high axial load carrying capacity and are used primarily as thrust bearings in rolling mill applications.

A single-row Tapered roller bearing can support a combined radial and axial load.

FASTENERS. FATIGUE TEST UNDER AXIAL LOAD.

It is concluded that calculating exactly the axial load is the key to the settlement of work roll bearing damage.

If a bar is subjected to an axial load, and hence a stress, the bar will change in length.

Tests were performed for no axial load and for axial loads of 700 N with and without external torques of 1 and 5 Nm on the ankle.

Spherical plain thrust bearings can carry a radial load Fr in addition to the axial load Fa.

TIMKEN-aligning roller bearings with two rollers, the main path a load to bear, but also can withstand axial load in either direction.

For applications where the axial load is heavier than the radial load (fig 7).

Strength of concrete under axial load.

Based on the in-situ test data of bored piles, the mechanism of axial load transfer was analyzed.

When axial load increases and then decreases in CD test, volume of some Kinds of soil is not expanding but contracting.

Generally, however, the axial load on the bearing should not exceed 0, 25 C0.

High radial load capacity, especially for heavy loads or vibration, but can not afford a pure axial load.

This type of bearings can carry not only radial load but also axial load in two directions.

45-degree steel ball's contact angle makes a better axial load.

Dynamic force calibration of axial load fatigue testing machines by means of a strain gauge technique

The requisite minimum axial load to be applied to needle roller thrust bearings can be estimated using

The requisite minimum axial load to be applied to thrust ball bearings can be estimated using

Verification of Constant Amplitude Dynamic Loads on Displacements in an Axial Load Fatigue Testing System

Buckling and free vibration study of orthotropic circular cylindrical shell under axial load

To avoid any risk of flange breakage, the constantly acting axial load applied to the bearings should never exceed

Calculating Analysis of the Load Capacity of Steel Hollow Rectangle Short Columns Filled with Plain Concrete Under Axial Load

Numerical computation of buckling of a double-walled carbon nanotube under axial load

Experimental research and finite element analysis on the performance of rapid wall filled with concrete under eccentric axial load,

Relationship between Moment and Axial Load of Reinforced Concrete Columns Strengthened with Prestressed Struts

The requisite minimum axial load for the angular contact ball bearing can be obtained from

Experimental study of tapering columns subjected axial load

Deformation Finite Element Analysis of the Eccentric Worn Tubing under Internal Pressure and Axial Load

The requisite minimum axial load for the thrust ball bearing can be obtained from

Experimental and theoretical research of rapid wall filled with concrete under eccentric axial load

Elements of electrical and optical connection - Test methods - Optical elements - Axial load

Analysis on Limit Values of Axial-Load Ratio and Ductility of Reinforced Concrete Columns Strengthened with CFRP Sheets

Stability analysis of square steel tube columns filled with steel-reinforced concrete under axial load

Discussion on axial load ratio limits of circular steel tube columns filled with steel-reinforced concrete

Calculation on the flexural capacity of steel reinforced concrete member with small eccentricity of axial load

Experimental investigation on L-shaped concrete-filled steel tube stub columns with binding bars under axial load;

An experimental study on the seismic ductility of PVA fiber super-high-strength concrete columns with high axial load ratios

Experimental study on seismic behavior of high-rise RC shear wall with concealed steel truss in different axial-load ratios

Numerical simulation analysis of the load-settlement behavior of pile under axial load

Buckling of a double-walled carbon nanotube under axial load

The Nonlinear Analysis of Regional Confined High Strength Concrete Short Columns under Axial Load,

arranging an axial load carrier collar (5) around the joined tubular ends;

Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results

Finite element analysis of load bearing capacities of centrifuge concrete filled steel tube on axial load

Study and Design of Intelligent Dynamic Monitoring System for Quality of Axial Load in Transport Vehicles

Experimental study on seismic behavior of high strength concrete short-columns with high axial load ratio

Nonlinear finite element analysis of laminated rubber bearings for capacity under axial load

Discussion on Wellhead Safety Affected by Axial Load from Retaining Wellhead Above Seawater

Analysis of axial load influence on mechanics characteristic of ocean deep water drilling riser

Experimental study on seismic behavior of high RC shear wall with concealed steel truss under axial-load ratio

The Performance of Concrete Filled Spiral Welded Rectangular Steel Stubs Under Axial Load

Elements of electrical and optical connection - Test methods - Axial load

Crashworthiness analysis of automobile thin-walled beams under axial load

High radial load capacity, moderate axial load capacity, in combined condition

in the CD test, the void water affects the deformation by sharing the axial-load and humidifying the sand grain;

Dynamic axial load carrying capacity of cylindrical roller bearings

Analysis and Calculation of Axial Load Capacity for Trust Tapered Roller Bearing Used on Mill Roll

Researches and applications on lower columns subjected to high axial load of tall building

Wood - Determination of nail and screw holding power under axial load application

Experimental study about short concrete column limited with CFRP under axial load

The coupling function analysis of the thread-locking ring of rock bit on axial load

test method for axial load temperature cycling of drop cable connector interface

Finite Element Stress Analysis of API Round Connections Under Make- up Torque and Axial Load

Dynamic interaction factor under lateral seismic excitation considering the effect of axial load

The Natural Frequency of Transverse Vibration In Axial Load of Simply Supported Beam

Calculation of Safety Contact Angle and Axial Load Capacity of Deep Groove Ball Bearings

Aerospace series - Elements of electrical and optical connection - Test methods - Part 405: Axial load

Influence of longitudinal steel on ductility of square columns under axial load

applying axial load to the exposed head of the pile or brad with some loading unit;

Analysis of axial load-transfer of large-diameter tubular pile using cast-in-situ concrete

Experimental study on internal inversion of metal tube under axial load

Analysis of Effect of Axial Load on Lateral Vibration of Underwater-to-Surface Missile

Dynamic interaction factor with axial load under lateral load

Maximum constantly or occasionally acting axial load, kN

A new method for testing tubing axial load in high-pressure and high-temperature wells

Brittle buckling of cold-formed welded steel tube struts under axial load

Ductility of High-Strength Concrete Columns Under Axial Load

Experiment on and analysis of force transfer of axial load in granular packs

Analysis of axial load-transfer of large-diameter cast-in-situ tubular pile

Axial load fatigue testing for threaded fasteners

Finite element analysis of effect of axial load level on ductility of CFRT frames

On Nonlinear Dynamics of Foundation Piles under Axial Load

Theoretical analysis on axial load transfer of single pile

Influence of axial load on bend and vibration of simply supported beam

Research on behavior of boring pile grouted at bottom under axial load

Static axial load test on manually excavated belled piles

Axial Load Investigation and Table of Axial Load Analysis

Test System of Multi- Axial Load and Simulating Fatigue of Front Suspension of car

Stability of pipe conveying fluid under axial load

High radial and axial load carrying capacity;

Effect of Axial Load on Casing Threads Connection Stress

Investigation on bearing capacity of square CFT columns under axial load based on neural network

Static axial load factor of the bearing

Analysis of base-grouted pile under axial load

basic dynamic axial load rating

combined radial and axial load

basic static axial load rating

axial load on horizontal pipe

Support radial and axial load in one dire

The axial load ratio lower than 0. 3 has a good benefit on the shear performance of SCC joint;

Study on the axial load in four-high mill

Axial load in one direction

Radial and axial load in one direc