autoclave

Some private dentist clinics were not equipped with autoclave and a few clinics did not perform disinfection.

Specifically, HITCO will fabricate three large composite spars that do not need to be cured by an autoclave.

An autoclave is usually necessary for preparation of the culture media.

It is necessary to place the wood in a pressure vessel, usually known as a cylinder or autoclave.

Our hot drape former is used for composite work to form components avoiding fibre wrinkling (Marcelling) before being cured in an autoclave.

abstract: Objective: To evaluate the effect on the surface of nickel-titanium files after two type of multiple autoclave cycles.

VARTM is one of three processing alternatives that proponents claim can achieve aerospace-grade results without resort to autoclave cure.

The multi-stable lattice structure is prepared by an autoclave technology.

Over the years the Autoclaves Group have designed and manufactured autoclave systems for the rubber curing industry.

It involves creating the outer skin with a fibre placement machine and curing it in the autoclave.

Water consumption and the beginning of autoclave cry, stronger and fire force.

A forecast model for the temperature of the medium inside the autoclave is built with indirect temperature measurements.

autoclave; water level; sterilization methods; energy saving; sterilizing efficiency.

It was when my family were happily enjoying the dinner that the autoclave blew up right beside my mother, who was doing the cooking.

Description is made of the present status of alkali autoclave process for tungsten metallurgy.

Label product vials; retrieve samples from storage; sterilize laboratory supplies and reagents by using an autoclave or filtration device.

Methods From the problems of the current drug sterility testing and autoclave sterilized, analyze the importance of both for drug safety.

Prepreg: Shipped to you saturated in resin. You'll need an autoclave to use this. Forget it.

and the autoclave door cover is opened and shut via an oil cylinder, thereby greatly reducing the labor intensity of workers.

Test principle for an autoclave is described briefly.

We use disposable , single-use needles, disposable wells, and use an autoclave for all other equipment.

Hydrogen was introduced to a pressure of1MPa, and then the autoclave was heated.

The reactor used in the experiment is autoclave.

A study on the sculptured and painted landscape Penjingmade of Autoclave Aerated Concrete Blocks.

The brick production steam pressure vessel, such as: boiler, autoclave reactor, pressure vessel from Shandong Taian factory supply.

In 1851 Chevalier-Appert invented an autoclave which lessened the danger involved in the operation of steam pressure vessels.

Autoclave cycle testing No failure occur.

Every shop should have an autoclave (a sterilizing machine) and should keep instruments in sealed packets until they are used.

There is something wrong with autoclave. You'd better have it repaired.

Numerical simulation study on transient heat transfer through the wall made of autoclave-cured aerated concrete

Design of the heat transfer coil pipe in an agitated horizontal autoclave

Establishment and verification of the relationship equation on rapidly predicting the concrete strength by the accelerated autoclave test

Introduce Simply the Relationship between Surface Quality and Safe Life of High Pressure Autoclave for Artificial Crystal

Relation between the PET melt intrinsic viscosity and stirring electric current of final polycondensation autoclave

The secondary set of instrument used in automatic control for autoclave

Industry: Mass transfer equipment; Metal Packaging Machinery; Plastic packaging machinery; Sulfur Dyes; Curing Press; Autoclave;

The HK Fibers Autoclave Process--The Next Generation in Wastepaper Processing

Adjusting Process Parameters of Caustic Autoclave and Increasing Decomposition Rate of Complex Tungsten Ore

Application of Two-stage Autoclave Process for Higher Tungsten Metallurgical Recovery

Industry: Autoclave; Curing Press; Other rubber machinery; Transmission belt; Hydraulic machinery and parts;

Accelerated moisture resistance - Unbiased autoclave

A Abrasion Abrasive Abrasive jet Abrasive nozzle Abrasive particle Abrasive suspension jet Advanced ceramics Air jet Autoclave

The reasons and countermeasures for the liquid level fluctuation of PET final polycondensation autoclave

Inquiring into Overcoming "Wave Marks" on the Woolen-like Cloth Being Conducted Autoclave Decatizing after Calendering

Study of Preparation of New Fly Ash Cement with Autoclave Method

Specifications for automated autoclave sterilizer

Increasing the single-autoclave yield rate of industrial naphthalene

Gas-Liquid Mass Transfer of Oxygen-Decane-Sodium Sulfite System in a Stirred Autoclave Reactor

Processing Difficulties and Measurements of Autoclave for Artificial Crystal

On Suggestion on Drawing up Standard of Autoclave Fly Ash Brick Industry to Promote Its Development and Extended Application

Good temperature resistance, withstand autoclave and repeating machine wash

The Influence of High-pressure Autoclave on Hydrogen Product during Hydrous Simulation Experiment

The Effects of Water Chemistry and Composition on the Microstructure Evolution of Oxide Films on Zirconium Alloys during Autoclave Tests

Study of New Autoclave-Free Aerated Fly Ash Concrete

Management of autoclave sterilization procedure

The influence of autoclave sterilization on elastic module and flexural strength of five types of posts

Autoclave Sterilization of Vaseline Gauze in Primary Hospitals: An Methodology Study

Influence of aggregate particle size on the expansion behavior of mortar bars under autoclave condition

Control and abnormal treatment of PET final polycondensation autoclave liquid level

Equipment should include an autoclave, certified HEPA filtered class I or II biological safety cabinet

Inspecting method for sterilizing effect of automated autoclave sterilizer

Modification on the mechanical seal of polycondensation autoclave

Consideration and practice of steam autoclave corrosion allowance

Causes for lack of integrity and cracking in autoclave-cured tire casing and their precautions

Causes for appearance defects in autoclave-cured tire and their countermeasures

Cause analysis and quality control for release of tubular bundle of autoclave and leakage of welding seam

Method for determination of the adhesion of autoclave tape to tray wrap material

Autoclave Moulding Technology of Main Load-Bearing Panel of CM Composite Horizontal Tail

Analysis and prevention of wall crack of autoclave sand-lime bricks and concrete building blocks

Maintenance of the table-top autoclave with a special fault

Mechanical Property and Hydrating Mechanism of Non-sintering or Non-autoclave Fly Ash Brick

Causes for water leakage during autoclave cure of tire and their countermeasures

Structure design and calculation of conducting oil heating for autoclave

Damage cause analysis and reforming ideas of autoclave for production of nitric acid

Series of horizontal autoclave sterilizers

Joint Improvement of the Autoclave and The Internal Barrier System

Standard Test Method for Autoclave Expansion of Hydraulic Cement

Measures for improving curing efficiency of autoclave

Production of Aluminum Sulfate from Coal Refuse by Autoclave Process

Corrosion and Protection of Stainless Steel Lining of Autoclave

Microstructure and Component of Abnormal Blue Oxide Film of Zr-4 Tube by Electron-beam Welding after Autoclave Testing

The Fault-tolerant Control Design of Autoclave Piping Mixing Device

Testing method for autoclave expansion of portland cement

Autoclave for high temperature dyeing and bleaching

Design on Door Driving Device and Seal Method for Large Vacuum Autoclave

Autoclave method for soundness of portland cement

Microstructure Evolution of Oxide Films Formed on Zircaloy-4 during Autoclave Tests

Influence of Proportion of Cement Mortar Mixed with MgO on Autoclave ExpansionValue

Study on Wall Block of Non-autoclave Compound-foamed Concrete

autoclave for synthesis strong nitric acid

Application of PLC to vertical autoclave

Design of autoclave for disposal of medical waste

test method for dehydration of crude oil by autoclave

Low Level Measuring of Lower Level Autoclave

Autoclave Products of Two Kinds of Typical Alkali Reactive Rocks in Alkaline Solutions

Immune fuzzy PID control system of autoclave group

Rational Use of Fly Ash in Production of Autoclave-Free Fiber-Reinforced SC Slabs

Expience of antigen fixing by autoclave water bath

The clinic analysis of eye trauma because of autoclave blasting in plateau

Use of waste vapor from autoclave for curing sand-lime brick

The Study on Safety Interlock Device of Autoclave