armature

and a plurality of equidistant inspection holes are formed on the armature of the electromagnet along the direction of an axial line.

An armature is similar to a rotor except that it includes windings of copper wire to which electric current is supplied via a commutator.

A two or three plate mold may be used to mold the plastic around the armature.

At this point, the armature is not posed , but I'm still hoping to get a sense of the final product even at this early stage.

As the armature strikes the bar beneath it, a sharp click is heard.

Groove's first look at their capacity to determine the size of two is to look at the armature windings of the linear and fixed.

The Earth behaves like an huge electric armature negatively charged, which repels the electrons and attracts the positive ions.

In the dynamo, mechanical energy is. used for rotating the armature between the poles of an electromagnet.

If one built a similar machine using a disk type armature instead of a cylinder, it would be much simpler.

At this point, the rollers move back into the shell, and the pinion gear turns faster than the armature shaft.

Be suitable for armature winding wire head auto-pressing into the welding slot of commutator to supply the next welding process.

The improvement will increase the range of the attracting force for armature, and improve the system stability.

A linear permanent magnet brushless DC motor(LPMBDCM) composed of an armature and a permanent magnet stator was introduced.

However, the interaction between the permanent magnet and slotted armature lamination produces cogging, which may cause noise and vibration.

An electric motor's normal force between stator and armature in SLIM electric motors is perpendicular to the direction of travel.

The manner in which the armature and field circuits of a DC motors are connected determines its basic characteristics.

A friction plate with a hole for connecting piece of axle is superposed on the armature.

Since your tube requires some alterations to the armature, it did not make the first cut.

By the study found that core length, length of armature coil resistance for the electromagnetic system the key design parameters.

Voltage remaining in capacitor inside armature after turning off the power. Avoid electrical shock.

Thissimple design of a proportional electric solenoid has a sliding armature whose magnetic force is proportional to the input coil current.

The invention relates to an armature-free reaction alternator, in particular to a three-phase alternator.

Thissimple design of a proportional electric solenoid has a rotating armature whose angular position is proportional to input coil current.

A short circuit device is arranged on an armature winding of electric power generation of the fan-driven generator.

Thus the insulating paper is inserted into the slots of an armature preciously and efficiently .

If the film's characters are anachronisms, the armature of "You Will Meet a Tall Dark Stranger" is positively creaky.

Then, when they approach their synchronous speed, a dc voltage is applied to the armature (rotor) to create poles of fixed polarity.

This kind of top grade film is specially provided for the high-end armature photographers and the professional photographers .

A contactor is a special type of electromechanical relay, where the contacts are attached to the armature.

A practical approach for open-closed armature position of the press's high spot closed-armature mechanism was introduced.

As the key components of the railgun, the armature has an important impact on the performance of launch.

But beneath the vat-grown clone flesh exterior are powerful synthetic muscles and composite armature giving them incredible strength.

Among DC electric motors most widely used as servo motors are commutator motors with separate excitation and variable armature voltage.

It is connected in series with the armature, hence the name series winding.

It gives me the armature for the whole thing you're going to be going through.

The plunger moves by movement of the armature to open or close the first orifice.

Spot welding of commutator and armature loops of motor engine and automobile engine, whose wire diameters are rather large .

If the diameter is less than the minimum, replace the starter armature assembly.

Ground the machine and armature. Take dust-proof and damp-proof measures. Maintainance and repair should be performed by professional.

Using an ohmmeter, check the resistance between the commutator and the armature core.

When the rotor, and hence the magnetic field, rotates, the armature coil cuts the magnetic-curves and produces electromotive force.

Relay which uses the electromagnetic field of a coil to attract an armature and close the contact points.

The invention also relates to an armature winding wiring method of the generator.

In the dynamo , mechanical energy is used for rotating the armature in the field .

These early headphones used moving iron drivers, either single ended or balanced armature.

Usage: suitable for open slot armature insulated paper automatic insertion.

In order to adjust motor armature and dynamic balance, the ends of the rotor magnetopolaron is equipped with a counterweight, respectively.

The armature includes an armature iron core having slots and teeth and armature windings wound in the slots.

We will see why control of current direction in the armature is important later, in the section on theory of operation of electric motors.

When the armature starts to spin, the rollers fit tightly between the shell and the pinion gear.

A restoring spring is provided to press the plunger toward the armature.

An armature with its wire winding.

If the result is not as specified, replace the starter armature assembly.

Based on the principle of electrodynamic vibration system, the reason of armature vibration central excursion is simply analyzed.

These disks are laminated on the shaft to build up the armature.

Brazed armature connection to commutator .

A restoring spring presses the armature toward the first orifice.

The pinion gear now turns at the same speed as the armature shaft.

The armature is the collection of conductors that will spin to crank the engine.

To view DC motor from AC armature can provide a useful vision to engineering practices.

The rotor or armature is supported on bearings in the housing of the motor.

But once the engine starts, the ring gear begins to drives the pinion gear faster than the armature's rotation.

This is simply the motor armature oscillating at the speed control's 2500Hz rate and is quite normal.

edit mode : your armature is in what we call rest position , you can move , add and delete the bones it contain.

The paper presents a brushless DC torque motor with coreless armature, which hasn't static friction torque.

The rotor of source source permanent magnet motors is a wound armature.

The plastic may stiffen the armature and increase its critical speed.

Armature manufacture and design of 6-layers-serials printed circuit motor is introduced here.

Factors influencing noise of the motor systems such as cogging torque, HALL signal errors and armature magnetic field are analyzed.

The first step of plaster modeling -tying an armature with newspaper.

The chivalric cafeteria decorate inside hotel is very coarse, put in hall hall have armature.

Eriction disc and armature surface should be kept clean and free of grease.

Power is needed to stall the armature against inertia.

When closing a model make use of form board to reset mould with the coactions between smooth piece , smooth piece and armature pusher.

An exciting coil is provided to move the armature.

The starter drive gear is mounted on the armature shaft.

This design is used where it is not possible to connect the transducer armature to the moving part being measured.

These emfs are generated in three sets of coils are mounted 120 electrical degrees apart on the generator armature.

The inductances of the armature windings and the field windings are calculated by using the flux linkage method.

A tall matte white armature on springy legs.

All electric motors have a central rotating section called a rotor or an armature.

A capacitor (123) is electrically connected with diodes (124, 125) and field winding (122) of field magnet and armature.

All softwares concerning this armature have been installed in C disk and a backup in E disk before leaving the factory;

Calculation of Armature Resistance and Inductance for Linear Generator Used in Magnetic Levitation Vehicle

Comparison Study of the q-Axis Armature Reaction of D. C. Generator and Synchronous Generator

The armature reaction and differential leakage reactance in free space of a long stator linear synchronous motor

The Demagnetization Analysis of Armature Reaction about Permanent Magnet Synchronization Generator

Problems on thyristor DC speed control system armature current discontinuous and its solving method

Electromagnetic Relay Having A Pivoted Armature Fixed with A Permanent Magnet

Study of armature correction system of electrical vibration table with high-linear-acceleration

Study on Molding Technology of Disc Armature of the Motors Used in Electric Vehicles

Design of mechanical device of the armature parameter intelligent detection instrument

Armature Response of Permanent Magnet Propulsion Motor and its Solving Measure

Model Study of Armature Equivalent Resistance in Brushless DC Motor

Effects of the DC Motor Vibration Monitoring System in the Analysis of the Short Circuit Accident of the Armature winding

Design of the Armature Parameter Intelligent Detection Instrument

Analysis of Armature Reaction Magnet Potential Influence with the Optimum Commutation of Brushless DC Motor

Study of Armature Equivalent Resistance in Brushless DC Motor

Specification for tractive armature direct current neutral-polar line relays for railway signalling

Characteristic Study Research on Electrothermal Properties of Solid Armature

The Dynamic Balance Technique of Armature Rewinding of Single-phased Series Motivated Electric Sheep-shearer

Specification for tractive armature direct current neutral track and line relays for railway signalling

Simulation and Analysis of the Internal Armature Winding Faults of the Salient Pole Generator

armature resistance R ( usually very small), and plugging in the motor starter switch when the current limiter has a certain effect;

The Resistance between Segments of the Simplex Lap Winding Armature with Non-equalizer

Simulation and Experimental Study on Harmonic Armature Reaction in Brushless Exciter

Control Strategy of Armature Current of Submarines Driver Electric Motor Load Simulator System

The design of speed adjustment of armature control DC motor using pseudo- derivative feedback algorithm

Testing and Analyzing Method of Over-travel Time Armature Actuation Time and Free Moving Time of Electromagnetic Relay

Most conventional permanent magnet motors can accept an armature current three or four times the rated current

The method for revise the magnetic flux density of armature teeth in synchronous generator calculating

Design of the Armature Mature Parameter Auto-detection Instrument

Analysis of Armature Magnetic Field of doubly Salient Permanent Magnet Motor with External Rotor on Inductance Characteristics of Windings

alternator; armature; rectifying unit; field;

Analysis of Armature Current for Rare Earth Permanent Magnet Synchronous Machine

Development of Intelligent Instrument for Measuring Armature Parameters

Fractional-slot Armature Windings and Hall Elements Placement for Brushless DC Motor

Motion analysis approach and application for high spot closed-armature mechanism of the press

The Forming Technology for the Armature Holder and Design of the Mould

Design of a Solid Armature in a Railgun

Rail and Armature Joule Heating of an Electromagnetic Rail Gun

Research on Velocity Measurement of Solid Armature by B-dot Probes in Electromagnetic Launch

Analysis of Armature Reaction of Star Connection Three Slots Permanent Magnet DC Motors

Dynamic Analysis for Outer-armature Spiral Electromagnet

general specification for printed armature dc servomotor

General specification for DC servomotors with wounded disc armature

Injection Mold of Thermosetting Material for Bicycle Motor Armature

ac commutator machine having auxiliary armature winding

Effect of the Armature Reaction on the Phase of the Commutation E. M. F. In Brushless DC Motors

Influence on Harmonic Armature Reaction in Brushless Exciter

Transforming the Motor Armature Insulation Structure of Electric Locomotive Air-compressors

electromagnetic torque T and the armature current I is also directly proportional relationship;

Sensor with replaceable armature installed

Armature of development of civil economics --Anticorrosive coatings

Analysis on Armature Reaction for Permanent Magnet Brushless DC Motor

The Material Selection of the Armature for Print Winding Motor

Armature Reaction Analysis of the Rare-earth PM Brushless DC Motor

The Quality Control and Test Method for the Armature of Print Winding Motor

Attention on armature bond fault in electromagnetic relay

The Load-balance Control Method for the DC-motor Unit Based on the Fuzzy Feedback of the Armature Current

Analysis of the Force Acting on the Armature in Induction Coil Gun

Design of General Cold and Hot Stamping Die for Armature Winding of DC Traction Motor

Analysis of Generator Eletro-magnetic Torque on Armature Winding Inter-turn Short Circuit Fault

Research on New Roll Painting Craft of Armature of Mini-direct Current Dynamo

Anticorrosive coatings are armature of development of civil economics

The Balance Control of Electrodynamic Shaker's Armature

Analysis of Armature Reaction and Losses in PM Synchronous Motor

AC exciter of totally enclosed, selfventilated rotating armature type

Friction dirt and armature surface should kept clean and free of grease;

Research of Calculative Program of DC PM Motor and Armature Reaction

Test Method and Device for Armature Revolution Axis Bending

Forming Technology and Design of Mould for Armature Bracket

Research and Development of Multi-channel Fuel Meter for Free Armature Injector of Motor Engine

New Processing Technics of Motor Narrow-yoke Armature Core

Modeling and Simulation of Double Armature Motor Speed System for 2030 Tandem Cold Rolling Mill

Analysis of Armature MMF and Additional Loss on Rotor Surface of Six-phase LCI-fed Synchronous Motors

Switch on and off much faster than any mechanical relay armature can move

Brushless DC Torque Motor With Coreless Armature

tin coated non - magnetic steel wire for armature binding

The design on the structure of a new type of rotated-armature vane pump

Research on the armature winding structure of long-distance linear synchronous motor

Analysis of Armature Reaction Influence on the Optimum Commutation of Tangential-set Magnet BLDCM Based on Finite Element Simulation

Research on Affection of Permanent Magnet by Armature Reaction in Multi-phase PMSM

Code for armature core length* *

The on Line Way to Detect the Insulation of Armature Windings for DC Generator