zirconia

One project is trying to use zirconia, a tin byproduct, to create solid oxide fuel cells.

Enter precious jewels, real or that of the cubic zirconia category.

A new method to characterize the surface activity of zirconia powder, iodine adsorption method has been discussed in this paper.

However, the catalytic properties of zirconia, which also acts as support, is not as well understood as alumina.

Raman study of the nanocrystalline effect on the pressure-temperature phase diagram of zirconia grown by Zirconium based alloys oxidation.

Cubic zirconia is recognised as the finest imitation of a diamond and is cut in the same way as diamond is.

A process to produce stabilized zirconia from a solution of zirconium salt and a stabilizing agent.

Separations of these biomolecules on quaternized PEI-zirconia are presented.

In the case of CO2 hydrogenation, methane was formed on monoclinic zirconia while formate species was observed on tetragonal zirconia.

Over the critical content, the mechanical properties of zirconia ceramic gradually decrease.

Zirconia ceramic with high mechanical strength and biocompatibility has shown great potential for dental applications recently.

Behaviour of implanted xenon in yttria-stabilised zirconia as inert matrix of a nuclear fuel.

The electrochemical cell preferably has a solid electrolyte, which may be yttrium stabilized zirconia (YSZ).

And experiment indifferent conditions Make zirconia crystal fiber Of the different diameters.

At fractographic analysis, specimens with fiber posts demonstrated delamination of the veneer ceramic from intact zirconia under structure.

The service life of the nozzle is determined by zirconia content in the nozzle.

The applications of zirconia on ceramic toughening, catalyst and carrier, ionic conductance and biology were introduced.

Microstructure investigation showed that the zirconia and impurity phases were dispersed in the BN layer matrix.

Zirconia matrix ceramic material has good physical and chemical properties, vastly applied in many high-techs industry.

Transformation behavior and flexural strength of tetragonal zirconia (TZ3Y) are affected significantly by surface modification.

A cone-shaped of 8%(in mole) yttria-stabilized zirconia electrolyte tube with a thin wall was fabricated using the slip casting technique.

The yttrium-stabilized zirconia(YSZ)and strontium titanium(STO)film buffer layers were prepared by Sol-gel process on Si substrates.

A nanostructured zirconia coating was deposited by air plasma spraying on nickel-based superalloy substrate.

The continuous zirconia fibers have wide application prospects in industry and aviation and space flight fields.

The rotor of the motor is thermally sleeved with a zirconia ceramic rotating shaft.

The hydrothermal method was important route for synthetic of zirconia. So it was studied a lot since it was invented.

Zirconia ceramic knives of high qualities ceramic knives were prepared using aqueous gel-casting method in this paper.

A large quantity of zirconia powder is used for plasm spraying to prepare thermal barrier coatings.

The fully stabilized zirconia ceramic material has excellent thermal shock resistance and low cost.

The crystal structures and ionic conductivity of yttria stabilized zirconia(YSZ) are analyzed.

In this review, the various modifications of zirconia packings, their application in HPLC separations are outlined.

A nanostructured zirconia coatings was elaborated by plasma spray liquid precursor sol.

We are good at machining fiber optic connector and zirconia ceramics material. Our machining precision can reach micron level .

The effects of temperature, concentration and reagent proportion on the morphology of stick zirconia were analysized.

With a 14-carat white gold-plated band, blue cubic zirconia stone and sparkling crystal setting, these rings sell overseas for $30 to $40.

Advanced technical ceramics - Methods of test for ceramic powders - Part 12 : chemical analysis of zirconia.

When zirconia content is 10%, zirconia infiltrated ceramics is essentially opaque.

DURA-32 Zirconia Toughened Alumina (ZTA) bead was sintered from alumina powder and zirconium silicate powder.

The self-sharing processes of silicon carbide and zirconia were analyzed.

The oxygen sensors include a heater which heats the Zirconia element .

Brazing by in-situ alloying of nickel and titanium foils was performed to braze zirconia to 444-stainless steel.

Nickel- Yttria stabilized Zirconia (Ni-8YSZ) cermet is the universal material in the Solid Oxide Fuel Cell (SOFCs) system presently.

Our products include: cubic zirconia (CZ), crystal, spinel, red and blue corundum , glass and so on with various of attractive colours.

Meaning, right now, we have a historic opportunity to snap up Hope Diamond investments at cubic zirconia prices.

abstract: Objective To study stress distribution of dental zirconia layered structure.

cubic zirconia is a kind of 8 . 5 hard less stone , it can make many kind of style of your request , can make your beautiful life.

Determination of zirconium in zirconia corundum by means of back titration with zirconium oxychloride standard solution

Development and property study of zirconia toughened nano-composite alumina ceramic powder for dental application

Study of Influence of Calcination Atmosphere on Phase Transformation of Zirconia by UV Raman Spectroscopy

Study of Factors Influencing Pore Size of Zirconia Ultrafiltration Membrane

Preparation and Physicochemical Properties for Zirconia as High Performance Liquid Chromatographic Packing Materials

Chromatographic Characterization of Fosfomycin-Modified Zirconia Support

Preparation of Spherical Zirconia Powder by Nano-Reactor of Microemulsion and Its Densification Behavior

Synthesis and characterization of cerium doped zirconia nanocrystallites by a surfactant- assisted route

Study on High-Temperature Electronic Conductivity and Thermal Shock Resistance of Zirconia Used as an Oxygen Sensor

Densification and mechanical properties of hydroxyapatite-zirconia composite materials

Preparation of Yttria Stabilized Zirconia Ultrafiltration Membranes with Inorganic Precursors

Study on Preparation of Spherical Zirconia Powder in Micro emulsion System and its Surface Characteristics

Preparation of Dye Ligand Urea Formaldehyde Resin-Zirconia Composite Microspheres and Their Extraction Property for Bovine Serum Albumin

Preparation of Graded Zirconia-hydroxyapatite Composite Bioceramic And Its Immunocompatibility In Vitro

Chromatographic Characterization of Dodecencylsuccinic Acid Modified Zirconia Stationary Phase

Preparation and Characterization of Zirconia Nanoparticle Multilayers on Micrometer-sized Silica Particle for HPLC Support

Preparation and Chromatographic Properties of the Dodecylamine N-Acetic Acid-N-Methylenephosphonic Acid Modified Zirconia Stationary Phase

Synthesis and Characterization of Palladium Loaded Mesoporous Zirconia Composite Catalysts

Synthesis of Mesoporous Zirconia with Hydrothermal Homogeneous Precipitation Method

Preparation of Mesopore Zirconia-Alumina Composite and Its Application to Normal HPLC Support

Microstructure of Nanostructured Zirconia Coating Prepared by Atmospheric Plasma Spraying

Influence on Mechanical Properties and Microstructure of Nano-zirconia Toughened Alumina Ceramics with Nano-zirconia Content

Preparation and Evaluation of Dodecyl Bonded Zirconia Stationary Phase for High Performance Liquid Chromatography

Preparation, property and microstructure of bauxite-based fused corundum -zirconia and mullite-zirconia materials

Determination of Trace Aluminum in Nano-size Zirconia Powders by Graphite Furnace Atomic Absorption Spectrometry with Slurry Sampling

Preparation and Characterization of Zirconia Support for High Performance Liquid Chromatography

Advanced technical ceramics - Ceramic powders - Determination of crystalline phases in zirconia

ESR analysis on existential electrovalence of changeable electrovalence oxide in fusion-cast corundum and zirconia corundum

Normal Chromatographic Characterization of Titania-zirconia Packing

Influence of Dispersant Contents on Rheological Behavior of Nano-sized Tetragonal Polycrystals Zirconia's Suspensions

Synthesis and Characterization of Aluminum Doped Zirconia Nanocrystallites

Zirconia Aluminosilicate, Germany Refractory Ceramic Fibres

Temperature-Independent Activation Energy for Ionic Conduction of Zirconia Based Solid Electrolytes

Influence of Process Factors on Polymerizing Behaviors of Nano-sized Tetragonal Polycrystals Zirconia Slurries

Friction and Wear Behavior of Rod-Like Mullite Dispersed Yttria-Stabilized Tetragonal Zirconia Polycrystal Ceramics

Preparation of High-performance Zirconia-doped Cobalt Catalysts for Methane Combustion from Co-containing Carbonate

Preparation of Machinable Zirconia Ceramics as a Dental Prosthetic Material

Peripheral blood mononuclear cells activated by graded zirconia- hydroxyapatite composite in vitro

Preparation, characterization and three-way catalytic performance of ceria-zirconia solid solution

Preparation of Uniform Zirconia-based Support Materials for High Performance Liquid Chromatography

Comparison of Properties of Plasma Sprayed Nanostructured and Conventional Zirconia Coatings

Preparation and agglomeration control of zirconia nano -powder by alcohol - aqueous co - precipitation method

Preparation and Its Application of Nano Zirconia by the Liquid- Phase Method

High-Temperature Creep Properties of Continuous Zirconia Fibers and Their Investigation Methods

Application and improvement of fluid bed pneumatic pulverizer in zirconia ultrafine powders production

Preparation and Chromatographic Evaluation of Benzylphosphonic Acid Modified Zirconia Stationary Phase

Preparation and Characterization of Silica-Zirconia Composite Membranes

Effect of Zirconia Content on Flexural Strength and Fracture Toughness of Dental Zirconia Toughened Composite Alumina Ceramic

Measurement of electronic characteristic oxygen pressure of zirconia by taking out oxygen from aluminium liquid

Calculation of the Elastic Constants for the Tetragonal Zirconia Crystal

Synthesis and Characterization of Samaria Stabilized Zirconia Powders by Buffer-Solution Method

Investigation of the Tribological Behavior of Zirconia Toughened Alumina Sliding in Air

A Study on the Mechanical Properties and Microstructure of Alumina-zirconia Nano-composite Infiltrated Ceramic

Progress for Application and Preparation of Ceria-Zirconia Composite and Prospects for the Markets

Preparation of Activated Zirconia for the Production of Automobile Exhaust Purifier

Preparation and Evaluation of Polymer-encapsulated Zirconia-based Packing Stationary Phase for HPLC

Influence of Addition of Same Component Nanopowder on Fracture Toughness of Zirconia Nanocomposites

Preparation of Toughness Alumina-Zirconia Nano-composite Infiltrated Ceramic

Preparation and Application of Agglomeration-Free and Nanoparticles Zirconia

Experimental Study on Performance of Nanostructured Zirconia Coatings by Plasma Spraying

Preparation of Core-shell Structural Zirconia Coated Alumina Nanocomposite Powders

A Study on the Thermal Expansion Characteristics of Alumina-zirconia Nano-composite Infiltrated Ceramic

Mechanism and Preparation of Nano-sized Zirconia by Microwave Induction Precipitation Process

Preparation of Titanium Dioxide and Titania-Zirconia Microsphere for HPLC Packing by Oil Emulsion Technology

Synthesis and Characterization of Mesoporous Zirconia Molecular Sieve

Study of Nano-crystalline Zirconia Modified and Coated by Carbon

Mechanical Properties of Hydroxyapatite-Zirconia Ceramics as Dental Implant

Preparation and Properties Research of Toughened Colorful Zirconia Ceramics

Latest Developments in Techniques of Zirconia-based Solid Electrolyte Preparation

Preparation of Mesoporous Zirconia and Analysis by Nitrogen Adsorption-Desorption

Industrial Application of Zirconia Special Fireproof Materials

The application of zirconia oxygen analyzer and its regeneration

the inorganic material is the arbitrary mixture of one or a great deal of titania, alumina, silica, zirconia and zinc oxide;

Influence of Ceria-Zirconia Solid Solution on Performance of Noble Metal Monolithic Oxidation Catalyst

Synthesis of butyl acetate catalyzed by ceria-zirconia solid solution under microwave irradiation

Advanced technical ceramics - Methods of test for ceramic powders - Chemical analysis of zirconia

Effects of Rare Earth Oxides on the Microstructure and the Mechanical Properties of Zirconia Toughened Alumina Ceramics

Measurement of Conductivity of MgO-stabilized Zirconia by Impedance Spectroscopy

Ultrafine Non-Agglomerative Zirconia Powders Prepared by Subzero Treatment

Improvement of the Method for the External Zirconia Examining the Oxygen in the FCCU Smoke

Progress in Manufacturing Zirconia Nanopowder and New Research Trend of Doped Zirconia Materials

Study on Preparation of Nano-Zirconia Dioxide and its Optical Properties

Preparation of Zirconia Powder with High Surface Area and High Thermal Stability by High-temperature-aging Method

Zirconia and Its Application in Slide Nozzle Plate for Calcium-Treated Steel

Research on thermal conductivity of zirconia-containing high alumina refractory fiber felt

Synthetic Research of Nanocrystalline Zirconia Ceramic

Evaluation of Zirconia Support for High Performance Liquid Chromatography

Preparation Method of Nano Zirconia and its Application in Catalytic Field

Study on the Combining Strength between Zirconia-Glass Composites and Opaque-dentine Porcelain

Analysis on the Microstructure of Zirconia Coating Deposited by Plasma Spraying Technique

Phase Diagram Calculation and Fabrication of Multi-component Zirconia-Based Ceramics

Design of a intelligent oxygen analyser on zirconia cell

Stress Analysis and Breakage Evaluation of Zirconia Ceramic Sleeves for Optical Connector

Effect of Reaction Temperature and Ascending Temperature Speed on the Phase Transformation of Zirconia

Comparative study of bond strength between zirconia ceramics and 4 luting cements

Sintering of the carbon coated powders of nanocrystalline zirconia

Measurement of the flexural strength of the Zirconia-glass ceramic composite

Progress in Zirconia Toughened Aluminum Ceramic Composites Powders

lead antimony manganese zirconia titanate(SM-PZT) piezoelectric ceramics

Study on Rheological Properties of Stainless Steel and Zirconia Aqueous Suspensions

Study on thermal shock resistance of zirconia-alumina refractory prepared by wet-chemical process

Influences of Tin Doping Amount on the Mesophase Structures of Mesoporous Zirconia Materials

Study on the Process and Properties of Nano-sized Polycrystal Zirconia Powders by Co-precipitation in Super-alkaline Medium

Ion-exchange and Ligand-exchange Properties of Zirconia and Zirconia-ceria Stationary Phases

Effect of graded composite zirconia-hydroxyapatite on viability of rat osteoblast cells cultured in vitro

Effect of thermal treatment on thermal diffusivity of nanostructured zirconia coating

Rare Earth Catalytic Materials--Study and Application of Ceria-Zirconia Solid Solutions

Research of the Wear Resistance of Zirconia in Reciprocating and Traction Drive

The effects of zirconia additive upon properties of the dental alumina-glas s-composite

A study on preparation of nano-sized zirconia material by uniform precipitation-frothing process

Effect of the Preparation Process on the Thermal Shock Resistance of the Zirconia Ceramics

Research and Application of Zirconia Ceramics as Dental Restorative Material

Effects of Zirconia Additive on the Microstructure of Corundum-mullite Composites

Study on Nano-structure Zirconia-matrix Thermal Barrier and Ablative Composite Coating

Microstructure and Performance of Plasma Sprayed Nano Zirconia Coating

Tribological Behavior of Zirconia Toughened Alumina in Distilled Water

Progress on stabilized zirconia as a solid-state electrolyte

Chemical analysis methods of zirconia-alumina refractories

Synthesis of ceria-zirconia solid solution for automotive exhaust treatment

High Performance Liquid Chromatography of Some Alkaloids on n-Octadecylphosphonic Acid Modified Magnesia-Zirconia Stationary Phase

Effect of additives on sintering property and thermal shock resistance of zirconia metering nozzle

Liquid phase sintering Nano-zirconia toughened dental all-ceramics at low temperature

Effects of corundum types on properties of alumina - zirconia - carbon materials

Development of Lewis Base-Modified Zirconia as Stationary Phases for High Performance Liquid Chromatography

Hydrothermal Preparation of Nano Zirconia in Ethylamine- Water System

States of Development for High Performance Compound Zirconia Industry

Friction and Wear Behaviours of Zirconia Toughened Mullite Composites

Investigation of nano-crystalline zirconia ceramics

Doped Properties and Applications of Zirconia Solid Electrolyte

Manufacture and Application of Yttria Stabilized Zirconia

Adsorption Mode of Di-dentate Ligand Modified Zirconia Stationary Phase Surface

Reviews on the studies of tetragonal phase stabilization in zirconia at room temperature

Application and Study on the Mechanism of the Phase-Stabilized Zirconia

Preparation of Nanosized Yttria Stabilized Zirconia Powders by Phase-Transfer-Separation Process

The effect of sintering temperature on the physical and mechanical properties of dental zirconia toughened ceramic

Effect of Zirconia on the Microstructure and Properties of Magnesia-Based Refractories

A Study on the Thermal Cycling Fatigue Behavior of Zirconia Toughening Mullite Ceramics

Preparation and Characterization of Ceria-Zirconia Mixed Oxide

Effect of Sintering Temperature on Part Physical Properties of Zirconia Dental Ceramic

Evaluation of Uncertainty in Measure and Assay Course of Zirconia Oxygen Analyzers

The Preparation of Zirconia Powders Containing Samarium with High Ratio of Surface Area

The level of process and equipment for the production of zirconia by carbonation- chlorination process

Development of Preparation and Application Prospects of Continuous Zirconia Fibers

Trial Manufacture of Mechanical Sealing Ring with Zirconia Ceramics

Influence of Zirconia Promoter on Catalytic Performance of Cobalt Catalysts for Fischer-Tropsch Synthesis

Effect of Partially Stabilized Zirconia on Sintered Glass-ceramic Substrate

Synthesis and Characterization of Pr-doped Ceria-Zirconia Solid Solution

Application of Zirconia Thermal Barrier Coating in Aeroengine

Progress in Zirconia Toughening Ceramics as Dental Prosthetic

Synthetizing of stable zirconia and application thereof

Development and Prospects for Electric-Melting Zirconia

Preparation and Characterization of Stable Zirconia Sol

Research Progress on Preparation of Ceria-Zirconia Solid Solutions

Grain Size and Thermal Conductivity of Nano-Zirconia Thermal Barrier Coating

Optimal Design of Zirconia-Based Nano-Composite Ceramic Grinding Medium

Active Structure of Zirconia-Supported Ruthenium Oxide Catalyst for Low-Temperature Oxidation of Methanol to Methyl Formate

Preparation of spherical zirconia by the wet chemical method

Measuring Error and Test Method of Measuring Oxygen Content by Zirconia Transmitter

Applications and Prospects for Zirconia by Electric Smelting

Spherical Hollow Zirconia Powder Used as Thermal Barrier Coatings

Production and Applications of Zirconia Ceramics

Study on the Abrasive Wear of Rubber Materials-Zirconia Toughened Ceramics

Preparation of nanometer powder of dental zirconia ceramics

Study on Mechanism of Solid State Synthesis Nanometer Zirconia Powder

Preparation and structural properties of zirconia nanotubules

Progress in the study of preparation of nano-zirconia using chemical precipitation method

Preparation of Stick Zirconia by Direct Precipitation

Preparation and Evaluation of Long-Alkenylene-PBD Coating Zirconia-Based Stationary Phases

Mechanism and Preparation of Nano-sized Zirconia by Low-temperature Aging

Application of Zirconia Oxygen Sensor in Industrial Boiler

A Review on the Stabilized Zirconia Ceramics Doped with Stabilizers

Effects of carbon kinds on properties of alumina-zirconia-carbon slide plate

Influence of Heat Treatment on Performance of Nano-zirconia Powders

Studies on Ceria-zirconia Solid Solution Promoters Modified with Tb

Preparation and application of nano-zirconia with high surface area

The Effect of Zirconia on the Performance of Cu-Cr Catalyst for Low Temperature Methanol Synthesis Slurry Phase

Thermal Stability of Silica-Zirconia Membranes

Phase Structure and Transformation of Zirconia

Stabilizing and Applications of Zirconia

Progress in Zirconia Applied for Dental Restoration

Study on slag resistance of fused magnesia-zirconia materials

Study on Comprehensive Utilization of Scrap of Cubic Zirconia

Study on Thermal Shock Resistance of Zirconia Metering Nozzle

Study on Amorphous Hydrous Zirconia by Infrared Spectrum

Tribological Behavior of Zirconia Toughed Alumina Sliding in Acid and Alkali Solutions

Research of doped zirconia solid electrolytes

Zirconia Ferrule for Connecting Optical Fiber

Treatment for Wastewater From the Production of Zirconia

Research on the Structure of Nanostructured Zirconia Coatings Deposited by Plasma Spraying

Study on Stabilized Zirconia Green Body by Aqueous Gel-Casting Method

Preparation of Nanosized Zirconia Powders by Hydrothermal Method

Zero electric potential of zirconia oxygen sensors

Study on Surface Electricity of Nano Zirconia Precursor

Discussion of the Mechanism of Doped Zirconia

Effect of Salt Ions on the Rheological Properties of Nano-sized Zirconia Slurry

Study on Gemmological Character of Synthetic Colourful Cubic Zirconia

Design of an Oxygen Analyser on Zirconia Cell

Zirconia Composite Silicon Ultra Micro-Power

Preparation of High Surface Area Zirconia by RefluxDigestion in Basic Solutions

Influence of Zirconia Raw Materials on Zirconium Color

Progress of research on planar zirconia oxygen sensors

Application of zirconia ceramic in dental implant

Effects of Parameters of Power Supply on Surface Roughness of Zirconia with ELID High Speed Grinding

The preparation of nanosized zirconia powders by hydrothermal method