weld

The usage welds the mask and the light mirror suitability, putting on the protection to protect your eyes and the body.

But the wild child boldly gets rid of him with a fluid shield and has yielded a building without welds.

But the wild child strongly gets rid of him with a fluid shield who has yielded a fbellyricgoting without welds.

"When a man is hit by lightning, " Tyler says, "his head burns down to a smoldering baseball and his zipper welds itself shut. "

But the wild child frankly gets rid of him with a fluid shield and they have yielded a undertsimilarg without welds.

About welds the robot to be possible to carry on along the guide rail moves, the work piece fixes on the work table motionless.

Welds and power routing and systems interfaces, even accounting for the fact that it was alien, all seemed so makeshift.

Cracks have been found in the flange and web splices at groove welds in at least four bridges.

Close examination of the plug welds showed the existence of herringbone patterns near the slag and voids in welds.

Following this one hour period, the system pressure shall be reduced to the MAWP of the system and are all welds and joints.

The various panels that go to make a road car are just spot-welded together with small welds every two or three inches.

The case is most preferably made of plastic, the connections preferably being hot-plate welds.

No spalled paint exists at the plug weld and for a short distance each side of the plug welds .

A couplant is needed for a test on stainless steel welds. Numerous Couplant are available. Which should be chosen?

The GMAW short- arc process shall not be used for welding socket welds or the root pass of O-lets and branch connections.

Many useful types can be formed Butt welds may be made using side by side, end to end, and crossed or intersecting wires.

All socket welded connections to have 100% magnetic particle or liquid penetrant examination of the welds.

resistance welding - destructive tests of welds - failure types and geometric measurements for resistance spot , seam and projection welds.

Non-destructive examination of welds. Ultrasonic examination. Characterization of indications in welds.

The Lamb waves are used for the ultrasonic characterization of welds because of their relative long-range propagation.

In the course of automatic welding , the measurement of welds is of great importance.

For single-pass welds, the current should be sufficient for the desired penetration without burn-through.

The Master Jeweler Plus can deliver precise and powerful welds without subjecting precious stones to this type of danger.

Any welds present within a coil shall be butt welded, sanded and planished to final thickness.

Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds.

The whole is in each and every part, and welds it with the rest into an absolute unity . . .

Natural-gas pipelines cannot be used because hydrogen makes the steel tubing brittle and attacks the welds.

Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.

Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds.

Radiographic inspection of all cross-point of welds, as well as all welds showing doubtful ultrasonic indications.

Ultrasonic testing is an important flaw detection technology of oil and gas pipeline girth welds.

Upon completion, check for any subsequent cracks in any of the welds, re-weld and check as required.

Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds.

PLASTICS. THIN POLYETHYLENE SHEETS. RESISTANCE TO SPLITTING OF WELDS UNDER TENSILE STRESS IN THE PRESENCE OF CHEMICAL AGENTS.

At least five (5) percent of the welds are 100 percent radiographed or ultrasonically examined.

Destructive test on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds.

Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels.

An "interbody fusion" is a bony bridge that "welds" the two vertebral bodies together to stop unstable motion.

Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds.

An invisible substrate of microbial life steers the course of life's whole and welds together the different nutrient loops.

Hydroformed parts are stronger and weigh less due to structural integrity and fewer welds or add-on pieces.

Non-destructive examination of welds - Radiographic examination of welded joints.

The body-bonnet welds are made on fully automatic MIG Welders.

Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement.

P There shall be no welds in wires and bars. Individual wires of strands may contain staggered welds made only before cold drawing.

Is mainly engaged, the heavy steel products and the special steel products' prefabrication, welds and the installation work.

All welds shall be visually inspected for defects and slag. All defects and slag found shall be removed.

Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels.

With respect to strength and toughness, chemistry and metallograph, the HIC performance of welds was analysed.

Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness).

The results show that a higher cooling rate for a weld is benefit for the decrease of hot cracks in Ni base alloy welds.

Non-destructive examination of welds - Magnetic particle examination of welds.

DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS. (EUROPEAN STANDARD EN 1321).

Thus the fracture likely initiated from fatigue sharpened cracks originating from slag and void in the plug welds.

Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels.

Examination of welds and castings by X-rays to locate hidden flaws is standard procedure in many industries.

Non-destructive examination of welds - General rules for metallic materials.

Several main ways of demagnetization for welds are introduced from practical experience in the paper.

Steel construction - Welded connections - Details and design of welds.

Non-destructive examination of fusion welds. Visual examination.

Model the machine: Adopting a steel and special kind welds the craft manufacturing, very fastness.

Post-weld heat treatment can help to restore the mechanical properties of welds in heat treatable alloys.

Destructive tests on welds in metallic materials - Torsion test of resistance spot welds.

International pressure vessel welds for testing is the most widely used non-destructive testing.

It is assumed that the load is uniformly distributed between the welds.

The welds passed the exwasin of radiographic test (ultrasonic inspection. . . magnetic testing).

Fits, assembles and welds metal parts and subassemblies to fabricate production machines and other equipment.

Assembles, welds and repairs pressure vessels and pipes to relevant standards.

The strengthening effects of C and V on high strength austenite stainless steel welds were studied.

All butt welds shall be full penetration and done in accordance with ASME code.

welds . working positions . definitions of angles of slope and rotation.

The embrittlement of the welds increases with the increase of quenching temperature of PWHT.

The effect of non-metallic inclusions on the fracture toughness master curve in high copper reactor pressure vessel welds.

I purposely made it short so curved welds can be made.

Begins ability, has the practical work experience, welds the production and the management familiar.

A welding apparatus is provided for carrying a welding gun across or past a surface for making welds.

When welding is required, all welds are subject to leak test to ensure the washer is water tight.

piping spools and field welds shall be determined by others.

Drag onto the page to add concave, convex, or flush welds. Increase height to fit above other weld shapes.

The welds pear ended the exarein of radvertisementsiographic test (ultrasonic inspection: magnetic testing).

The dimensions of welds feet shall comply with drawing requirements.

RAILWAY FIXED EQUIPMENT. THERMIT WELDING OF RAILS. WELDS PERFORMED BY COMPAGNIES. PERFORMANCE AND ACCEPTANCE CONDITONS OF WORKS.

Welds standardized test plates for Code conformance.

The electroslag welds were found to have a lower level of fracture toughness than implied from qualification tests.

note the different plate thickness approval range for fillet welds.

DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. FRACTURE TEST. (EUROPEAN STANDARD EN 1320).

Cracks that have developed in the web at lateral connection plates have generally occurred because of intersecting welds.

The welds pbummed the examining of r driving instructorographic test (ultrasonic inspection: magnetic testing).

ALL WELDS CONTINUOUS UNLESS OTHERWISE STATED.

Definition of welds on drawings of aerospace equipment.

This will occur if the two spot welds are too close together, and it will happen with all metals.

ZENG Yue. The modern welds a technical manual. Science technique publisher in Shanghai, 1993.

Dye-penetrant and magnetic particle inspection techniques were used on the repaired and other 21 remaining original welds.

STEEL CONSTRUCITON. WELDED CONNECTIONS. DETAILS AND DESIGN OF WELDS.

A welding method that produces welds that are smooth and free of defects such as automatic orbital welding should be employed.

A worker welds at the China-Kazakhstan pipeline junction in Xinjiang, China, in 2008.

Welds quality of the product meets the requirements of Grade . It can be acceptable.

The height of tack welding don't exceed normal welds , eliminating postweld slag at once .

Arc strikes outside of the welds were avoided.

The welds cracks and local buckling were found at steel joints.

Welds in steel. Calibration block number 2 for ultrasonic examination of welds.

c. 3. All welds and solder joints will have wire brushed clean and washed with hot water, or solvent, to prevent corrosion.

Introduces an automatic sped modulation system for welding turner, which is used in the automatic . welding of spiral plane welds.

The whole world spells welds the board output to rise year by year, the rising momentum is very strong.

Samples of welds are broken and examined for defects.

The welds on the board are scanned with lasers for defects.

Tack welds shall be made in accordance with qualified procedures and by qualified welders.

Nothing welds a family more than these.

Company's product type model is complete, covers "welds" "shears" "guards against" and so on many domains.

It is recommended that when welding around a perimeter, a series of tack welds should be used.

The box corner welds were made with E70 electrodes.

Steel welds are classified into three grades in order to evaluate their quality.

You can either use it as welds and leave it on or remove it and get good scribes just like Kevin is on the Oscar.

It can satisfy the requirement of automatic testing to tubular joint welds.

Check condition of all welds.

One cause of delay in the development of new steels has been that welds have failed, causing cracking.

For certain welds an electric arc is used.

The design and realization of a real-time ultrasonic inspection system for girth welds

Characterization of the Defects in Welds by Ultrasonic Time-of-Flight Diffraction Technique

Calculation of the Length of Welds at CHS Overlapped K-Joint without Eccentricity

Analysis and Assessment on Defects in Welds of Large-Diameter Steam Pipeline Made of Straight Seam Steel Pipes

Microstructures and Mechanical Properties of Al-Li Alloy Friction Stir Welds with a Cone-shape and Non-whorl Pin

Analysis of the Stress around the Shell-to-bottom Fillet Welds of Large Oil Tanks

Standard Practice for Mechanized Ultrasonic Examination of Girth Welds Using Zonal Discrimination with Focused Search Units

Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination

Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels

Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases

Standard qualification procedure for ultrasonic testing technique of aluminium and aluminium alloy welds

Thermodynamic analysis on intermediate transformation mechanism of acicular ferrite in welds

Evaluation of Flaws in High-Thickness Welds by NDE: Comparison between ASME Code-Approved New Technologies And Traditional Methods

Ultrasonic phased array inspection technology of offshore platform structure tubular joint welds

Mechanized Ultrasonic Testing of Pipeline Girth Welds for West-East Natural Gas Transportation Engineering

Study of Ultrasonic Testing Probes for Welds in Steel Space Grid Structures

Experimental research on joint behavior of H-section beams with flanges and end-plates connected by non-completely penetrated welds

Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints

Determination and application of spacing spot welds of the box section members by cold-formed steel hat section

Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds

Standard qualification procedure for radiographic testing technique of welds

Methods of ultrasonic inspection and result classification of circumferential butt welds in steel pipes and tubes

Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys

Development of a Scanning Equipment for Ultrasonic Testing of Small-Diameter Tube Welds

Destructive test on welds in metallic materials - Macroscopic and microscopic examination of welds

Microstructural investigation on friction stir welds of dissimilar metals between mild steel and copper

Classification of imperfections in metallic fusion welds, with explanations

Application of Phased Array Ultrasonic Inspection Technology on Girth Welds in Long Output Pipeline Project

Research into the methods for ultrasonic testing of welds for steel-structure truss with connected lines

Welds in steel; Reference block for the calibration of equipment for ultrasonic examination

Application in the roll welding machine welds part combination change of position control of frequency converter

Edge preparation for welding; matching of inside diameter for circumferential welds on seamless pipes

Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints

The Research on Improvement of the Cryogenic Ductile of Austenite Stainless Steel Welds

Evaluation of Chemical Compositions of Repair Welds of Steel Castings in Power Plant Using Welding Electrodes

Reliability evaluation of NDT techniques for Cu-welds for risk assessment of nuclear waste encapsulation

Modeling and prediction of solidification behavior of low-expansion superalloy welds

Method for manual ultrasonic testing and classification of testing results for ferritic steel welds

Study of defect due to preheating in thermit welds

Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis

Preparation of welds; matching of inside diameters for circumferential welds on welded pipes

Guide for the Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds

Calculation of the minimum distance between two adjacented longitudinal welds on conical transition section

Optimal Selection of Automatic Ultra-sonic Test Process for Welds with Both Sides Submerged Arc Welding

Destructive tests on welds in metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 1: General

Ultrasonic Testing of the Welds in Steel Truss for Incomplete Penetration

Design and Study of Testing Scanner for Pipeline Welds

Flaw Location Evaluation in Ultrasonic Examination to Welds in Unequal Thickness

New Finite Element Modeling Technique for Spot-welds of Autobody in Vehicle Dynamic Simulation

Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination

One Special Technique of Non-destructive Testing--Radiographic Testing on Tube to Tube-sheet Welds

The Characteristic and Industry Application of Helical Fin-to-Tube Welds of High-Frequency Welding

Effect of Activating Fluxes and Welding Parameters on Shape of Welds in A - PAW Welding

Submodeling technique and its practice in the study on stress direction of cross joint with the welds transverse

Double Wire Welding and Automatic Ultrasonic Testing of Girth welds of Submarine Pipeline

Destructive tests on welds in metallic materials - Transverse tensile test

Radiographic Inspection of the Tube Welds of Nuclear Power Station Main Loop

Non-destructive testing of welds - Radiographic testing of fusion-welded joints

Brief Introduction of Helium Mass Spectrometer Leak Test for the Welds of Tube and Tube-sheet

Monte carlo computer method for simulating microstructure evolution in HAZ of welds

THREADED-IN STRENGTH WELDED BONNETS (Full-penetration welds on special orders only)

Reference Radiographs for Examination of Aluminum Fusion Welds

Non-destructive testing of welds - General rules for fusion welds in metallic materials

The finite element analysis on the annular welds of a vessel and it's tolerance discuss

Basic element for evaluation of welds or structures or components being fabricated

Standard Reference Radiographs for Examination of Aluminum on Welds

Welds for the same joint dimension can be made with many or few passes;

Non-destructive testing of welds -- General rules for metallic materials

The Warping Torsional Deformation Analysis of Spot-Welded Double-Hat Box-Section Thin-Walled Beam Under the Change of Spot-Welds Pitch

Methods for non-destructive testing of fusion and resistance welds in thin gauge materials

Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Part 3: Externally loaded tests

Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs

Preparation of welds; part 4: matching of inside diameters for circumferential welds on seamless pipes of stainless steels

EN 1712 Non destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels EN

Radiographic Testing of Fillet Welds by Local Compensation and Double-Film Method

Ultrasonic Location of Defects in Austenitic Stainless Steel Welds

Magnetic Particle Inspection of Welds on Refrigerated Storage Tank

Application of template matching technology in image treatment of welds

Non-destructive testing of welds - Magnetic particle testing

Subject to failure (contact welds, spring failures, etc. )

Destructive tests on welds in metallic materials - Fracture tests

Reasons for Tubeplate Joint Welds Corrosion Cracking of Titanium Reboiler and Correction Measures

Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Part 2: Self-restraint tests

Ultrasonic Evaluation of Pipe Welds in Steam Power Plant by Using Mobile Automated Scanning System

methods of ultrasonic angle beam examination for butt welds of aluminium plates

Practice for Examination of Welds Using the Alternating Current Field Measurement Technique

Methods of ultrasonic angle beam examination for welds of aluminium pipes and tubes

Cause for Porosity in Circumferential Welds by Automatic Argon Arc Welding

Destructive tests on welds in metallic materials - Hardness test - Part 2: Micro hardness testing on welded joints

All welds shall be smoothly finished and free from pits and splatter

Welding; peel and chisel testing of resistance spot, projection and seam welds

T joints butt welded only qualify T joints butt welded and fillet welds (see a);

Standard Reference Radiographs for Steel Fusion Welds

Non-destructive testing of welds - Visual testing of fusion-welded joints

Automatic scan device of ultrasonic NDT in detecting the pipeline girth welds

Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints

methods for automatic ultrasonic testing for welds of ferritic steel

Non-destructive testing-Magnetic particle testing of welds

Radiographic Examination Report for Welds

Welds repair of the bush of water flowing diversion bearing of the hydro-generator unit

Guide for the Nondestructive Examination of Welds

Sensor and fuzzy control system for temperature at welds of hi-frequency welded pipe

Study on Automatic Welding Machine for Pipelines All Position Welds

Discussion on Radiographic Exposure Times when the Source put at Convex Side of End Splicing Welds

Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Part 1: General

Nondestructive testing symbols for welds

X-ray Examination on Circumferential Welds on Small Diameter Pipes

Analysis of finite element of residual stresses in different welds

method for ultrasonic examination for welds of ferritic steel

Shearing Stresses of Side Fillet Welds for Overlap Connection

Destructive tests on welds in metallic materials - Bend tests

Nondestructive test for fillet welds in nozzle stubs of HP utility boilers

Crack control of longitudinal welds in thick-walled copper vessel

A study on the design method for aluminum columns with longitudinal welds

Discussion on ultrasonic test on the welds of boiler small diameter pipes

A study into fatigue strength of laser welds of pure titanium and titanium alloy

Non-destructive testing-Penetrant testing of welds

Residual Stress Analysis of Fillet Welds Along Three Orthotropic Directions Based on Finite Element Method

Air tightness or vacuum tightness test for welds on the boundary of tight tanks

The Wuhu ship king welds the material limited company (ship trump card);

Impact Toughness of Pressure Vessel Steel and Welds in High Loading Rate

Brief Introduction to the Water Cooling Apparatus for the Drill Pipe Welds

Method for Fatigue Life Prediction of Automotive Spot-Welds

Study on Carrying Capacity of Beams with Longitudinal Welds

Refabrication of fuel rods - qualification of the end plug welds

Reference Radiographs for Steel Fusion Welds

Destructive tests on welds in metallic materials-

Combined welds of the welded beam in the gate and headstock gear

Optimized Welding Process of Curved Surface Welds of Skin Effect Trace Pipe

Liquid Penetration Technique for Pipe Welds in Boiler

Specification for calibration block No. 2 for ultrasonic examination of welds

Specification for welds - Information on drawings

Discussion on Evaluation of Defects in Welds of Small-sized Tubes