welded joints

P The strength of the welded joints along the anchorage length of welded fabric shall be sufficient to resist the design forces.

Welding T91 steel pipe is usually used TIG welding, mechanical behavior under high temperature of welded joints played an important role.

The maximum shear strength of welded joints can be increased by optimizing the form of lap welding.

The corrosion resistance of welded joints is dependent on inclusions, chemical compositions and microstructure of the joint.

The under-matched welded joints should be used in actual engineering structure to improve the fracture resistance.

The deposition efficiency of welding wires metal, microstructure and mechanical properties of welded joints were studied.

All welded joints to determine the final welding process, the preparation of welding technology cards.

Welding and allied processes. Radiographic testing of resistance spot and seam welded joints. Recommended practice.

The results show that the select process parameters for laser welding obtain good shaping, out weld defects in welded joints.

The results showed that the strength of laser welded joints was increased and the elongation rate was decreased compared with base metal.

Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.

The welded joints were completed by the X-ray test, mechanical properties tests and metallographic analysis.

Welding of metallic materials is mainly determined by the organization and properties of welded joints.

RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF UNALLOYED OR LOW ALLOYED STEELS. RULES FOR CONCEPTION AND REALIZATION.

The mechanical properties of welded joints with different welding parameters were studied through tensile test.

Non-destructive examination of welds - Radiographic examination of welded joints.

Its a new method to increase fatigue strength of welded joints and structure by peening toe of weld with ultrasonic peening equipment.

Satisfied laser wire welded joints and laser-arc hybrid welded joints were obtained at several plate thicknesses.

The tensile and fatigue properties of TC4 titanium alloy sheet and its laser welded joints were investigated.

Tensile strength and impact toughness of welded joints are slightly higher than that of the base metal.

Meanw-bile, hardness distribution and microstructure of the alloy and welded joints were investigated.

Proportions of welded joints have been standardized.

ALUMINIUM AND ALLOY THEREOF. WELDING. CLASSIFICATION AND TESTING OF WELDED JOINTS.

The results show that the stretch strength of beth welded joints are correspond the bases, but the plasticities obviously decrease.

Three types of strength matching of welded joints for different steels were reviewed.

Weld of CLAM plates T-welded joints was good shape, but there existed an obvious angle distortion in joint flange.

All socket-welded joints shall be dye- penetrant examined final pass only.

Lifting and handling. Welded joints. Part 2 : weld quality classes. Extent of the non-destructive testing.

Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination.

Welding - Fusion-welded joints in steel, nickel, titanium, and their alloys.

The effect of post-weld heat treatment on the impact toughness in inertia friction welded joints of carbon steel was studied in this paper.

The fatigue properties of aluminum alloy welded joints are sensitive to mean stress.

The corrosion mechanism of friction stir welded joints was discussed.

Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.

Hardness and microstructural studies of electron beam welded joints of Zircaloy-4 and stainless steel.

Mechanical properties and metallographic structure of different welded joints for duplex stainless steel 2205 were investigated.

Testing of welded joints of thermoplastics semi-finished products - Part 3 : tensile creep test.

The weld ability of Q460C low alloy structural steel welded joints is theoretically analyzed in this paper.

Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test.

Testing of welded joints of thermoplastics semi-finished products - Part 1 : bend test.

Testing of welded joints of thermoplastics semi-finished products - Part 7 : tensile test with waisted test specimens.

This paper has studied the effect of heat treatment on the mechanical properties and structure of the welded joints.

lifting and handling . welded joints . part 1 : fabrication.

Finally, a fatigue life prediction equation for spot-welded joints is given based on fatigue testing data.

Furthermore, fatigue strength of welded joints subjected to operating loads has been intensively examined (Refs. 1-12).

The results show that mis-matched welded joints have some influences on fracture driving force.

At the same time, I have analyzed of the organizations and microhardness of the laser welded joints of medium carbon alloy steel 30CrMnSi.

How many types of the welded joints are there ?

Two kinds of welded joints had micro-M_(23)C_6 carbide precipitate.

A Study of the Accelerated-life Test Specification for the Coil-tube Welded Joints of a Utility Boiler

Probability Distribution of Fatigue Life of Notched Friction Welded Joints under Variable-amplitude Loading and Its Simulation

Study on Properties of Welded Joints Micro-zones in Aluminium Alloy Profiles Used for Train

Accelerated Test Study of Residual Life Mathematical Model for the Friction Welded Joints in Boiler Snake Pipe

Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys

An Analysis of Cracking of Welded Joints Between a Elbow and a Guide Steam Tube of HP Lower Cylinder and Countermeasures

Defects in Metallic Welded Joints; Cracks, Classification, Denominations, Explanatory Notes

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections

Arc-welded joints in aluminium and its weldable alloys - Guidance on quality levels for imperfections

Imperfections in plastic welded joints; classification, terminology

Experiment on dressing for improving fatigue strengths of welded joints with low transformation temperature electrode

Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels

Comparison of Ultrasonic Peening Method on Improving the Fatigue Behavior of Welded Joints with TIG Dressing under Variable-Amplitude Load

Numerical Analysis on Fracture Mechanics Parameters of Mechanical Heterogeneous Welded Joints

Microstructure Characteristics and Weld Cracking Formation in Nickel Superalloy Laser Welded Joints

Study of Microstructure and Properties of Non- Electric Welded Joints

Testing of welded joints of thermoplastics semi-finished products - Macroscopic examination

Non destructive testing of welded joints of thermoplastics semi-finished products - Visual examination

Ultrasonic peening improves the fatigue strength of welded joints in a ultra-fine grained steel

Characteristics of stress distribution and prediction of strength in heat-affected zone softened welded joints

Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints

Influences of Heat Treatment on Mechanical Performances of Welded Joints of High Strength Bainite Wear-resistant Plate

Stress distribution and deformation within strength mismatched welded joints

Application of Wavelet Packet Analysis Method to Signal Denoising in Ultrasonic Testing of Friction Welded Joints

Investigation on ductile crack propagation for welded joints considering micro-plastic damage

Observation of Carbon Distribution in Pearlite-Austenite Dissimilar Steel Welded Joints

Improving the Fatigue Strength of Welded Joints by Low Transformation Temperature Electrodes

Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel

Non destructive examination of welded joints - Ultrasonic examination of welded joints

Testing of welded joints of thermoplastics semi-finished products - Requirements

Prediction of fracture toughness for welded joints in brittle-ductile transition temperture

Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints

Testing of welded joints of thermoplastics semi-finished products - Low temperature tensile test

Fatigue Strength of Welded Joints for Architecture Reinforcement Steel Bar With Ultrafine Grains

Stress Corrosion Cracking and its Precautions on Welded Joints

Influence of welding residual stress on the failure assessment curve in welded joints with transverse crack

Corrosion resistance properties of duplex stainless steels welded joints

Research on Accumulative Damage of Anti-Seismic Welded Joints Under Seismic Cyclic Load Simulation

Improvement of fatigue properties of welded joints for titanium alloy by ultrasonic peening method

Crack-tip stress field and fracture parameter of welded joints with cracks located at fusion line under mixed loading

Numerical Simulation of the Residual Stress in Laser Beam Welded and TIG Welded Joints of Thin Plat

Computer simulation of the fatigue strength of cruciform welded joints

Capacity Analysis with Fracture Mechanics on Welded Joints of Structural Member in Machinery

Welding distortion of welded joints with low transformation temperature weld metal

Welding - Multilingual terms for welded joints with illustrations

Fatigue assessment of duplex stainless steel welded joints by volumetric approach

Testing of welded joints of thermoplastics semi-finished products - Tensile creep test

Technical factors influencing the quality of the fusion welded joints in steel

Nondestructive Inspection of Corner Welded Joints in Inserting Headers

Microbiological Corrosion of Stainless Steel Welded Joints

Development of Steel Plates for Architectural Construction with Excellent Toughness in Large Heat Input Welded Joints

Numerical Finite Element Analysis of J-integral Fracture Parameters for Welded Joints

Testing of welded joints of thermoplastics semi-finished products - Tensile test

Mechanical properties of welded joints of fine-grained steels with softened heat-affected zone

Standard Specification for Welded Joints for Shipboard Piping Systems

Safety assessment of duplex stainless steel pipe mismatch welded joints with surface flaw

Key role of temperature on forming ferrite-band structure in welded joints of aluminium-bearing steel

the different wire spacing microhardness peak of welded joints all appears in heat affected zone;

Non-destructive testing of welds - Radiographic testing of fusion-welded joints

Narrowing HAZ During Induction Heating for Friction Welded Joints of High Strength Steel

Experimental Research on the Fracture Performance of Welded Joints under Pre-strain

Electron and laser beam welded joints in steel; guidance on quality levels for imperfections

Experimental study on the mechanical properties of aluminum welded joints

Design and Development of Defect Assessment Method and Its Assisted Assessment System of Welded Joints

Stress Corrosion Cracking of Pipeline Steel Welded Joints and Controlling

Non destructive testing of welded joints of thermoplastics semi-finished products - Part 3: Ultrasonic testing

Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination

Numerical study on influence of rupture strain on crack driving force of welded joints with damage

Mechanics properties of welded joints between pure copper and stainless steel

Testing of welded joints of thermoplastics semi-finished products - Peel test

Numerical Simulation on Stress and Strain Distributions of Spot-welded Joints

Nondestructive Testing of Electron Beam Welded Joints in Titanium Base Alloys

Property of Titanium Alloy Welded Joints Treated with Ultrasonic Peening

Protection of welded joints of sprayed porcelain pipe by self-deposition of enamel coating

EN 1712 Non destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels EN

Mechanical properties of magnesium alloys welded joints

Research progress on fatigue assessment of welded joints by local approaches

Influence of Temperature on Fracture Toughness CTOD in Welded Joints of Thick Steel Plate

Evaluation on Fatigue Strength of Duplex Stainless Steel Welded Joints by Hot Spot Stress

Testing of welded joints of thermoplastics semi-finished products - Tensile test with waisted test specimens

Estimation of fatigue performance of welded joints by local approaches

Mechanical Properties of Stainless Steel Welded Joints

Test on the Properties of Welded Joints of Three Types Steel of under Small Energy Lash of Heaps of Times

Welding of the CWR and defect inspection for the welded joints

Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel

Destructive tests on welds in metallic materials - Hardness test - Part 2: Micro hardness testing on welded joints

Corrosion characteristics of welded joints of copper pipe in seawater

Stress Corrosion Cracking of Pipeline Stell Welded Joints and Defence

The Engineering Treatment Method of J-Q Fracture Criterion of Welded Joints With Cracked Body

Testing of welded joints of thermoplastics semi-finished - Part 5: Macroscopic examination

J-Estimation Method of Pipe Welded Joints with Circumferential Surface Crack

Corrosion behavior of welded joints of copper pipe in artificial seawater

Non-destructive testing of welds - Visual testing of fusion-welded joints

Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test

Discussion on Irradiating Many Welded Joints Once by Ordinary X-ray Generator

Microstructures analysis of magnesium alloy spot welded joints with AC and DC

Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints

Prediction of Fracture Behavior at Dynamic Loading for Welded Joints

Specification for Welded Joints in Machinery and Equipment

Fracture toughness for large welded joints in offshore platform

The effects of electron beam heat treatment on residual stress of Ti alloy welded joints

Research Progress on the Fatigue Behavior of Friction Stir Welded Joints

Experimental Study on the Effect of Mechanical Heterogeneity on Dynamic J-integral for Welded Joints

Boiler pressure parts - Mechanical test for welded joints

methods of radiographic examination for welded joints in steel

Investigation on the Creep Behavior of Stainless Steel Welded Joints by C-C Method

Study on Microstructure and Properties of Manual SHS Welded Joints

Non-destructive testing -- Metal magnetic memory -- Part 3: Inspection of welded joints

Welding Filler Metals for Aluminium; Testing by Welded Joints

Reliability of the Friction Welded Joints in Boiler Serpentine Pipe Based on Accelerated Life Test

Effect of forging force on fatigue behavior of spot-welded joints of aluminium alloy

Method of repeated tension fatigue testing for fusion welded joints

GH3039 laser-welded joints have the same tensile strength as the parent material at room temperature and at elevated temperatures;

Strength and deformation in HAZ-softened welded joints

ASME Code Case and New Rules of Ultrasonic Examination of Welded Joints

Engineering assessment of fracture criterion of welded joints based on stress- triaxiality

Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test

Testing of resistance welded joints - Part 2: Torsion test on resistance spot welded joints

An engineering method of fracture criteria for welded joints

Fatigue Damage Parameter of Spot-welded Joints Based on Dynamic Response Characteristics

Review on the Mechanical Properties of Mg-alloy Welded Joints

A New Method for Analysis and Evaluation of Welded Joints Creep Damage

The Estimation about Endurance of Welded Joints

Fatigue strength of welded joints of high strength steel

Test method for pulsed tensile fatigue of welded joints

Test method for shear tensile fatigue of spot welded joints

Test method for fatigue crack growth rates of welded joints

Fatigue Life Prediction for Welded Joints

Investigation on Dynamic Fracture Behavior for Welded Joints Based on Local Approach

Crack tip stress triaxiality in welded joints

Life forecast of friction welded joints based on stress-strength interference model

Check and Solution of Welded Joints Defects of No. 2 Boiler Drum in Qinhuangdao Power Plant

Advancement on the Brittle Fracture Assessment of Welded Joints Based on Local Approach

Study on Salt Spray Corrosion of Two Kinds of Aviation Light Alloys Sheet and Their Laser-welded Joints

Mechanical tests on welded joints in clad plates

welded joints for spectacle frames

Ultrasonic Inspection of Spot-Welded Joints of Coated Steel for Car Body Based on FFT Processing

Openings through or near welded joints

Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-2:

Fig. 1 Classification of cracking in welded joints

Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; German version EN 12814-2:

Stress analysis and fatigue life estimation of four kinds of super-alloy welded joints