weld

the hoe hoop is welded with the top of the hoe sheet as a whole; and the upper part of the hoe sheet is provided with a leaking hole.

Draft marks made of steel plate shall be welded and painted on both sides of the fore, middle, aft of the ship.

The heat for fusion welding is generated in several ways, depending on the sort of metal, which is being welded, and on its shape.

Cluster Breakers are typically welded to the bottom of a slope-sided infeed hopper, and positioned over a second discharge hopper.

He now has a deep dislike for a man whose Bluetooth headset is welded to his head.

The safety bar is composed of a bar head welded on a longitudinal safety bar body and a bar body welded on an automobile chassis.

Place Assuming the frame is properly grounded to the welder, the gussets are ready to be welded to the frame.

In such cases, the pump end of the assembly must be supported by either contacting the base, or by means of a support block welded in place.

cylinder , aluminium, whether or not welded, of any capacity, for the transport of storage of compressed or liquefied gases.

A bottom flange of the B-pillar is welded to a lower edge flange of the rocker reinforcement and a lower edge flange of the side sill.

Steel seems to be the best material, but not if it is welded to form a rigid structure.

Welded steel spherical digester made from carbon steel is often used as a pulp digester.

P The strength of the welded joints along the anchorage length of welded fabric shall be sufficient to resist the design forces.

ANSYS was used to calculate the stress within membranes of welded metal bellows used for mechanical sealing.

cylinder , of iron or steel, whether or not welded, of any capacity, for the transport or stroge of compressed or liquefied gases.

It shall be welded to the connection rails which are formed of standard rails from its four ends by an electrical weld.

Working together for a month welded them into a strong team.

Also insure that the other side of the angle extrusion arms are welded as shown in the side view drawing.

Weldability is a much-used word , obviously intended to describe the ease_or otherwise with which a metal may be welded .

A relatively permanent offshore platform made of welded tubular steel in which the legs are attached to the sea bottom by piles.

The freeboard marks are made of the steel plate, welded and painted on both sides of the ship.

The tops should NOT be welded to the bottom, since we are going to make measurements.

If the welder has not welded with a process during a period of 6 months or more, his qualification of that process shall expire.

And a plurality of reinforcing steel bars are welded between the short fins to enhance the integrity and stability of the fins.

the overall quality and performance of the door welded by laser are better, and the laser welding process reflects a higher flexibility.

The Carrying Shelves are made of bent sheet metal or welded steel profiles depending on the product to be carried.

There is no significant difference between the pull-out forces of the joint expanded prior to welding and that welded prior to expansion.

Using the digital control mode to prevent the run is expected to prevent the surface of the workpiece to be welded slip injury.

B. The main frame is welded structural steel to which are bolted the channel iron lift support beams.

Welding T91 steel pipe is usually used TIG welding, mechanical behavior under high temperature of welded joints played an important role.

The printed label material is trimmed and then seamed or welded to turn it into a tube.

If they were on when the couplers were welded and machined, then the side bars will move from the heat as soon as I break the bars off.

This Volkswagen Passat has Kevlar, steel and polyethylene composite plates welded to the frame and inside the door panels.

A solid fillet should be welded around the entire circumference of each cross-member tube.

The fatigue life of welded tubular joints in offshore platforms is determined by the magnitude and the distribution of the hot spot stress.

Some people may with to drill the holes after the shoot sides are welded to the tank and the door is in position.

The thermostatic spring is made up of two different metal strips welded together and formed into a spiral.

It becomes light deformed when bottom of Tube are welded sheet iron by worker. But it is nothing for using of the products.

The shell parts of reactor pressure vessels have been often fabricated with formed plates welded together, especially in USA and Japan.

All specimens consisted of a concrete-filled square hollow section column and four H-shaped beams welded to it.

The bar steels adopt I steels, angle steels or channel steels, or adopt steel plates which are welded into a cross shaped section.

The welded metal bellows mechanical seal is largely used for the axial seal of hot oil pump in refinery.

The roof of a combined workshop is an orthogonal spatial square pyramid grid with bolt-sphere joints and welded-sphere joints.

A solid fillet should be welded around the entire circumference of each tube.

The invention relates to a friction welded anodic aluminum guide-bar unit and a friction welder thereof.

When used as a wedge welder, heavier weight materials can be welded together to make large weather resistant products and structures.

Stellite faced Seat Rings are welded into the body. This provides a positive no-leak seal of the ring in the valve body.

Tensile testing, fracture analysis, microstructure analysis, hardness test were carried out on the welded joint.

Therein the first and second thermoplastic materials are selected to be capable of being welded together.

Welded short-link and very short-link calibrated loading chains used for lifting appliances.

All-welded stainless steel CFXTM heat exchangers can be used in many applications where copper or other metals are not suitable.

By the method, the hitting surface material can be welded with the titanium alloy shell to form a whole structure.

In my opinion, an aluminum frame properly welded is a work of art that has no equal.

and a reinforcing plate is welded with the installation frame and the side wall frame.

The other end of each steel plate is welded on another annular steel plate, and the annular steel plate and the steel ring are concentric.

The black metal piece between the electric motor and Porsche transmission is an adapter I designed, machined, and welded myself.

The characteristic and its production process flow of high strength welded pipe are introduced.

the nominal stress and hot spot stress are calculated and compared for the welded shock absorber bearing of a locomotive bogie frame.

The maximum shear strength of welded joints can be increased by optimizing the form of lap welding.

Once satisfied, clean all areas to be welded with a stainless steel brush and weld as shown below.

For welded steel tank, installation of pump set top box, the side panel thickness should be appropriately increased.

Steel tubes. Welded tubes intended to be coated or protected for use in water piping systems. Dimensions. Technical delivery conditions.

The permanent stainless steel supported footing of staging to be welded on slope area in advance where the stage to be fitted.

The yoke might be rigidly welded to the shaft tube or it might be a spline, or slip yoke.

The difficulties arising during the removal of a cold- welded locking head screw will attest to the value of using this instrument.

The parts of the crashed car had to be welded together in the garage.

In addition, the high residual stress occurs at the bottom of a tube welded on pipelines.

A good electrical connection to the material to be welded must be established.

The microhardness distribution of the welded joint is along the welding line. The microhardness is higher in nugget zone, and lowest in HAZ.

NO DEFORMATION: Width of the welded joint is small and only a little quantity of heat is produced, since wire electrodes are used.

Its sealing surfaces is welded with cobalt, chromium, tungsten alloy and seat and shaft are made of stainless steel.

Buckling distortion is inevitable in thin-walled structures. This is one of the main problems which affect the quality of welded products.

These two men welded their city and their music into a single identity, making Vienna and the waltz almost a single thought.

The welded joint with good appearance, defect-free and excellent mechanical properties can be obtained under optimum joining conditions.

The various panels that go to make a road car are just spot-welded together with small welds every two or three inches.

So it has to be refined, forged, welded, and cast in a vacuum or under inert gas, an expensive process.

Assuming that the Knuckle Face Plates have been fabricated (and welded to the frame), the steering knuckle assembly can now be assembled.

The flying sawing machine is one of the key units of the straight welded pipe production line.

The view shows the tank with the door assembled with the door seal and hinges welded in place.

WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. FRICTION WELDING MACHINES. QUALIFICATION SPECIFICATIONS.

The stainless steel pipe may be welded in the way of argon protected welding and high frequency welding upon the customers request.

The design of positioner for the shaping of triangular solves the question that the reinforcement is shaped and welded in small space.

While aluminum obviously obeys the same laws of mechanics as all other materials, it must be approached differently than steel when welded.

The parts of the bicycle had to be welded together.

The tail end of the previous coil is cropped. The tail end of previous coil and leaving end of next coil is put in the welder and welded.

Over the years people have been crushed, hit on the head, welded and even had molten aluminium poured over them by robots.

Containers, pipes and tanks which used to fill with flaable gas, liquid without cleaning and measuring, should not be welded and scalpeled.

The guide vane-operating ring shall be made of welded steel plate and shall be of rigid design.

Welded and brazed assemblies for aerospace constructions. Electron beam welding machine. Qualification specifications.

Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies.

The crystal grains in the heat affected zone were finer and the heat affected zone was smaller when welded with pulsed TIG welding.

the anti-creeping guard plate can be directly welded on a metal object, or riveted or fixed by screws on a place needing protection.

DESERTED streets, drains welded shut, fighters patrolling the sky.

Welded pressure vessels are widely used in modem energy, power machinery and chemical engineering industries.

Welded-type clamp liner: Clamp liner intended to be joined to a pipe end by butt welding.

Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.

In the petrochemical industry, joints are either welded or bolted together by means of flanges.

Electric welding is the heating of two pieces of metal to be welded by electricity.

Cabinet: a welded steel plate as the main material to become a major test bed enclosure support structure.

INDUSTRIAL INSTALLATIONS. MECHANICALLY WELDED UNITS. GENERAL TOLERANCES.

Various customized non-standard fastener, mechanical component, bolts, screw, nuts, studs , welded frame, fixtures, auto accessories, etc.

The test result show, it possess higher crack resistance, satisfactory weldability, and im-prove mechanical properties of the welded joint.

We were welded into a fighting collective.

Castings may be welded or reshaped by grinding to repair chips and cracks as long as the repair is blasted to blend in the appearance.

In the strain-controlled test, the fatigue life of crack initiation is measured for the welded joint.

The planar K-type and multiplanar KK-type joints are very commonly used in the directly welded circular hollow section (CHS) structures.

A systematical calculation was conducted for the J integral crack parameter of a welded joint using the finite element method.

Semicircle steel sheets were welded on the wall of evaporation pipes in fluidized bed roaster for anti-abrasion.

The penetration depth shall not be evaluated but the joint must be welded without any lack of fusion.

Set In. Branch fittings that are welded into the wall of the header pipe by a buttweld.

The transverse supporting bar is welded with an installation pedestal which is used for arranging a feeder-beater component.

Series "L" and Series "XL" Air Platforms are heavy-duty, welded steel structures designed for carrying large loads up to 150, 000 lbs.

One-piece stainless steel, fully- lugged , cast body is stronger than welded bodies and less subject to distortion due to thermal stress.

The corrosion resistance of welded joints is dependent on inclusions, chemical compositions and microstructure of the joint.

Equipment base to be welded must be fitted on requirements like and grinded , before it welded .

The wall thickness of welded spherical digester made from carbon steel becomes thinner by corrosion.

Briefed are the process and equipment configuration of the inner burr-removing system for ERW straight welded tubing.

the case with steel plate welded into a snail shell-shaped overall.

The microstructure of welding intracrystalline repair welded with flux does not grow up with increasing time.

All socket welded connections to have 100% magnetic particle or liquid penetrant examination of the welds.

the lower layer coil winding end head is welded with the copper bar of the argon-arc welding through the soldering.

The procedure put forward to achieve two type of procedure in a unit and obtain the manufacture of welded rectangular pipe after forming.

After the aluminized plate was welded in the bottom of the retort, its service life was raised by 6 times.

WELDING AND ALLIED PROCESSES. RESISTANCE SPOT, PROJECTION AND SEAM WELDED LAP JOINTS. CLASSIFICATION OF DEFECTS WITH EXPLANATORY COMMENTS.

The newly developed manufacturing equipment for small-sized precision stainless steel welded pipes is technologically advanced and unique.

While in use, the utility model can be installed at the welded junction of the pipeline inner wall.

The base of the machine adopts a channel steel and the body adopts welded steel plate.

Tailor welded blanks have been widely used in the automobile structure parts because of its' special advantages.

X-RAY-ray inspection using a lead-free solder paste of voids issue, found that the size and diameter welded hollow in acceptable range.

The door was sheet metal welded on to the frame of iron.

WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. FRICTION WELDED ASSEMBLIES. QUALITY OF WELDED ASSEMBLIES.

inclined drain on the road, the pressure can choose the size of seamless steel tubes, welded steel pipes and Cast iron pipe.

The blue circle oxide films on fuel rods near the welded zone by electron beam (EB) welding were formed after corrosion tests.

All attachments welded to pressure envelope shall be compatible with the pressure envelope material.

aerospace series - pipe coupling - coupling end , welded - geometric configuration.

It was assembled using tools designed to manipulate nano-particles, and welded together with tiny deposits of platinum.

Welded and brazed assemblies for aerospace constructions. Resistance spot or seam welded assemblies. Quality of welded assemblies.

The suspension framework was welded by the seamless steel pipe, the hand crane and suspension framework are fixed on the suspension coop.

The usage of standardised sensors, which are welded into the measuring element, makes an automated manufacturing possible.

A core drill bit consists of a steel tube with diamond segments brazed or laser welded on the drilling end.

This section contains the requirements for the preparation, assembly and workmanship of welded steel structures.

The launching wagon is also equipped with "hang" wheels that runs on the top of the same launching rails welded on the structure.

Perforated Sheets, Expanded Metal, Woven Wire Mesh, Textured Sheets, Welded Mesh, Profile Edgings , Wire Cloth Perforated Sheets.

The under-matched welded joints should be used in actual engineering structure to improve the fracture resistance.

As a whole, the specific elongation of the welded joint is smaller than that of basic material.

Uzbek men are now replacing fallen trees with welded iron barriers, to keep out their attackers "until the peacekeepers arrive" .

Results: Tensile strength and micro-hardness of plasma-welded titanium had no difference from the control group.

It introduces the plating zinc and painting plastic procedure of double layers welded pipe and its equipment.

Buried welded-pipes for underground services like transporting oil, gas and water are subject to corrosion by the soil.

The welded seam has no holes, cracks and other defects.

Laser holographic interferometry is used for non-destructive test of the welded dots on PCB.

The results show that the experimental and analytical methods are feasible for the study of strength and ductility of laser welded joint.

The influence of RE on the microstructure and hardness of welded joint was studied by the experiments adding RE in electrode covering.

A large number of these cracks occurred because the groove welded component was considered a secondary member or attachment.

A composite step-like sawblade matrix comprises a sawblade matrix which is welded with a step-like matrix concentric with the sawblade.

Frame - Liebherr-made, torsion resistant welded construction. Consisting of high tensile fine grain structural steel.

WELDED ASSEMBLIES OF HOLLOW SECTIONS AND RECTANGULAR HOLLOW SECTIONS SUBJECTED TO STATIC LOADING. DESIGN AND VERIFICATION.

Components for containment enclosures. Part 2 : gloves, welded bags, gaiters for remote-handling tongs and for manipulators.

The enclosing crate has been made using square-section galvanised-steel tubes which have been automatically electric welded.

Briefed in the article are the inner burr formation of and the burring method for the hi-frequency straight welded tube.

The second method involves construction of a vehicle frame from steel tubing formed and welded together.

The transmission mechanism is composed of a guiding ring which is welded on a machine frame, and four rods crank mechanism.

The deposition efficiency of welding wires metal, microstructure and mechanical properties of welded joints were studied.

Flow switch can be installed in a reducing tee, standard tee or welded fitting.

metal structures . welded assemblies of circular hollow sections . construction.

This? welding? line? should? be? gouged? and? welded? again? before? tightness? inspection.

Any welds present within a coil shall be butt welded, sanded and planished to final thickness.

The analysis method provides some theories foundation for the safe assessment on welded joint strength in rotation blade.

All welded joints to determine the final welding process, the preparation of welding technology cards.

Welding and allied processes. Radiographic testing of resistance spot and seam welded joints. Recommended practice.

The weld zone is the weakest in welded joint due to effects of chemical components of filler and crystallization process.

All-steel welded structure, the integrated treatment (VSR, heat) Elimination of internal stress, a very good rigidity and stability.

Producers of castings, pressings, welded shapes; fabricators and erectors of structural steelwork.

Once I had welded the surrounds on to the keyboard, I measured it on the case and trimmed and bent it to shape.

The second bend and the first bend are welded together such that the wall of the cylindrical tank is formed.

An explosion bulge test on a welded plate specimen without a crack starter and sin1ulated weld specimen was conducted.

A method of repairing and a repaired friction stir welded assembly is disclosed.

Accessible seams on the inside of the enclosure shall be welded with continuous filet weld.

may contain a large number of molten tin, continuous welded and will not lower the temperature of molten tin.

Metal skins will be welded together with lasers, eliminating thousands of fasteners.

Seat Rings: Seat rings are seal welded to eliminate leak path behind rings and for long trouble-free service.

Computer fixed length flying cutter applied in large diameter and thick wall thickness longitudinal welded pipe was introduced.

The results show that the select process parameters for laser welding obtain good shaping, out weld defects in welded joints.

The results showed that the strength of laser welded joints was increased and the elongation rate was decreased compared with base metal.

Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.

This procedure prescribes ultrasonic testing method and quality classification for welded joint .

The seam of the reducer connection is not welded thoroughly and needs welding and grinding.

Its production welded wire mesh machine, and the production of welded wire mesh machine repeatedly applied for the national patent.

The conventional welding connections for the welded thin-wall box member have poor stiffness and low bearing capacity.

The interrelated action principle of beam and rail of continuously welded rails on bridge is the pivotal technique of track engineering.

The welded joints were completed by the X-ray test, mechanical properties tests and metallographic analysis.

The graphic displayed is a typical causeless "air bag" , welded fabric seams and an inflation system.

Cast ball-and-socket joint is used as the column support, while circular hollow section welded joint is used at the top of the tube.

Seamless or longitudinally welded stainless steel tubes for exchangers in aircraft construction.

Welding of metallic materials is mainly determined by the organization and properties of welded joints.

The results showed that the method could improve the reliability of inspection for car body coated steel spot-welded joint.

RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF UNALLOYED OR LOW ALLOYED STEELS. RULES FOR CONCEPTION AND REALIZATION.

Even complete car body shells may not be further assembled if the stabilizing elements are not welded.

100% heliarc welded, insuring a liquid tight seal on the body of the heater.

Large weldments in die structure will be machined on the mating surfaces, screwed together, welded, and normalized before final machining.

A bumper system includes a roll formed tubular beam (21) with bracket mounts welded to a rear surface for mounting to vehicle frame rails.

Advantages: all-steel welded structure, floating spindle, wear - resistant high - chromium alloy hub.

The mechanical properties of welded joints with different welding parameters were studied through tensile test.

The steel structure surfaces including all welded beads to be painted before the leak test, in general.

The hull and turret are of all welded steel construction with enhanced armour protection over the frontal arc.

The features of electric resistance welded(ERW) carbon steel pipe are analyzed from the viewpoint of design code and material selection.

Continuous welded rail may be included no weld is over 9 inches from the end of the piece of rail. (28A)Rail, Steel No. 2 Cropped Rail Ends.

At last, the technical requirements for laying welded switches in chilly areas have been put forward.

Aluminum pipe precise forming technology makes the ultrasonic welded Aluminum pipe size precise and roundness good.

The stress corrosions in welded plate heat exchangers are studied and associated preventive measures are suggested.

Stumps were inserted and welded between the two straddles so that the girders become an integrated arched girder.

metal structures . welded assemblies of circular hollow sections . design and inspection.

The valve is welded in fine steel, having the features of peculiar structure, non-obstruction, reliable and flexible operation.

import of tinned-cards and membership cards produced by the substrate is a variety of metal welded.

With the example, one method for designing flat cover with welded gasket commonly met in pressure vessel design was presented.

welded - steel - type mill chains , welded - steel - type drag chains , attachments , and sprocket teeth.

products, such as when you used to be welded blank of products operation, avoid high temperature burn plating.

The lower translational velocity can improve the coalescence of the welded plates.

Structure: weaved and welded, using low carbon steel wires, fixed by the linking accessories and steel pipe.

It has high strength. Its plasticity is good in both not state and cold state. It is easy to be cut and welded.

Meanwhile has carried on the experimental analysis and the explanation to the hot melt welded pipe's bearing pressure performance.

Our company is state-owned, and possess electric welded wire mesh factory, chemical industry factory and horse's mane and hair factory.

Welding temperature is an important parameter to the production of welded pipe.

The rack uses the channel steel to take the main body, the middle with stiffener board welded together.

The main form and cause of fatigue failure of steel crane beam are analyzed first, and focused the welded steel crane beam.

Analyzed the uncertainties on the fatigue properties of welded hollow spherical joints plate grid structure.

One common method uses alternating layers of welded wire matting with layers of compacted back-fill earth from the landscaping site.

The most common of these alloys is 7075, which should never be welded for structural applications.

ALUMINIUM AND ALUMINIUM ALLOYS. LARGE DIAMETER WELDED TUBES. DIMENSIONS AND TOLERANCES.

As-welded tube will have the residual weld bead of metal protruding into the ID of the tubing.

A turning point of the back shelf is welded with an installing pipe.

This is in part because this type of aluminum can be easily welded and is relatively strong.

After unwinding, the film is mechanically blocked. A blade moves with the welding bar, the film is cut and welded in the same movement.

Non-destructive examination of welds - Radiographic examination of welded joints.

AM50 plates was welded by AC spot welding. The mechanical properties, microstructure and fracture of the joints were investigated.

The screw plate is made of tray steel or welded single piece steel, so it is a whole one and continuous.

Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series.

With the series size of welded pipe development, it put forward higher requirements for roller design.

The experiments show that the welded seam is good and the metallurgical joint was achieved without melting the shell body.

Laser welded diamond blade is characterized by its high welding strength and good standing ability at high temperature.

Thus, a pipe section for which the ends have been welded would be reported as 60% complete.

This welded seam is found an obvious air hole and an unqualified undercut with macroscopic check.

we could produce plate for structural use , welded structural use , building use , machine structural use and plastic die mold use.

Head cover is of a welded structure of the Q235 steel plate with sufficient strength.

Its a new method to increase fatigue strength of welded joints and structure by peening toe of weld with ultrasonic peening equipment.

Properties of pearlitic steel and austenitic stainless steel compound pipes TIG welded joint are studied in this paper.

What are the major challenges that the Italian welded pipe sector is facing?

Objective: To evaluate the biological compatibility of laser-welded dissimilar alloy in dentistry: Co-Cr and Ni-Cr alloy.

It may provide important imformation for the research on the static and fatigue Load of welded hollow sphere joint.

The seam of the bend is not welded thoroughly and requires welding and grinding.