trunnion

WILLIAMSONs metal to metal sealed trunnion ball valve is in general of the front ball sealing structure.

The trunnion assembly is supported by air bearings at the end of each arm and is held in position by brake shoes at each bearings.

In general, WILLIAMSONs trunnion ball valve features the front ball sealing design structure.

The load and air cylinder can swing round the pin in a plan, if the stroke is long, adopt the intermediate fixed or movable trunnion type.

Trunnion design allows multi-directional flow; means that the valve is in no danger of being installed "backwards. "

The showering trunnion mounting water cock, the choice is shorter, does not use the too long water pipe showering.

Special Trunnion sizes and configurations are available. Consult factory when ordering.

and an adaptive curved cushion group is arranged between the trunnion ring retainer seats(3) and the converter shell seat(4).

Handling and transport design of converter trunnion for Panzhihua ISC .

Trunnion Design: Upper and lower supports retain ball under pressure.

Application : Slag line of ladle , trunnion of converter and the line of EAF .

The discharge trunnion liner, finally it finally fell to the ground and broke his leg.

screw yoke apart from the transmission output shaft and remove the trunnion cross.

journal of the shock strut in the aft trunnion bearing(Fig. 408).

The QTCV-T1 trunnion-mounted rotary control valve designed for general control valve service.

so that the shock strut will not touch it(Stage2, Fig. 405). Attach the trunnion link in position to clear the gear.

The trunnion journal (22) is made by cutting hardened steel with using no cutting fluid.

support shaft(5) through the reaction link universal(3) and the trunnion link pin(6) from the aft side.

Refined Calculation on Tilting Moment for AOD Converter and Presentation of the Safety Position of the Trunnion

Performance, reliability, and provision of the horizontal trunnion type

Fitting up and welding technology of steelmaking converter trunnion ring

Dynamic load capacities for horizontal and trunnion type centrifugal casting machines are:

Shipbuilding and marine structures; Trunnion pieces for span bearings and lead block bearings

Processing Plan to Ensure Trunnion Co-axiality During Assembly Welding of Converter Trunnion Ring at Site

Profile Modeling for Longitudinal Forward Kinematic Track of Push-arm Trunnion of Bulldozer

Trunnion mounts handle high differential pressures and prevent side loading

Design of Hydraulic Hoists for Eccentric Trunnion Sector Gates of Xiaolangdi Project

Repair and improvement to the trunnion on a cutter suction dredger

The Improvement of Turbine Guide Vane Trunnion Seal for Sanmenxia Water Power Plant

Measurement and Analyses for Trunnion Pin's Disalignment of Converter

Dynamic Analysis of Middle Axis of Double Ring- and- trunnion Universal Joint

Improvement in technology of Large steel water pitcher trunnion

Finite Element Analysis of Double Ring-and-trunnion Universal Joint

Technology Development of Lower Trunnion Centre Drive and Its Application for Ljungstrom Air Preheater

FORWARD TRUNNION BEARING FUSE FASTENER;

Study and application of VSR technique on trunnion steel girder

The study of riding comfort model of triple-axles truck with trunnion suspension

Cracks Emergency Treatment on Trunnion and Mill shell

Reparative try ofseriously damaged ball mill trunnion in Shaoguan Power Plant

Repair Welding of Converter Trunnion at Driven Side

AFT TRUNNION BEARING FUSE FASTENER;

Treatment of axial cracks on trunnion R-zone of ball mill

trunnion wheel is dead level with each other trunnion wheel in all possible

double yoke pieces for span trunnion

From 2 tons to 25 tons, choose from clevis or trunnion mounting;