wafer

The invention relates to a radiator fan, which comprises a fan frame, an inner rotor motor, at least an impeller and a circuit wafer.

Virgin Test Wafer- A wafer that has not been used in manufacturing or other processes.

And a Y-type waveguide coupler on silicon-on-insulator(SOI)wafer used for an Intergrated optoelectronic Model was designed.

The sub-threshold current test, which is often done at the wafer level, is a measure of how quickly the device will turn on and off.

A small disk or wafer of wax, lead, or paper bearing such an imprint and affixed to a document to prove authenticity or to secure it.

Egyptian priests practiced "transubstantiation" , claiming to be able to transfer the sun god Osiris into a circular wafer.

I went into a clean room with a fresh silicon wafer, and then I just cranked away at all the big machines for about 100 hours.

The great game of short-term borrowing, used to purchase longer-term and risky assets, on wafer-thin equity, would be ruled out.

Chip: The individual circuit or component of a silicon wafer, the leadless form of an electronic component.

The method for forming a solder mold for transferring solder to a wafer includes etching a plurality of solder cavities into a substrate.

Area Contamination - Any foreign particles or material that are found on the surface of a wafer.

Contamination Particulate - Particles found on the surface of a silicon wafer.

The invention is capable of forming an even spread source coat on the surface of the wafer.

The surface grinding temperature of the silicon wafer ground by diamond wheels is studied.

Alternatively, coating the wafer with a nanotube-containing solvent by spinning the disk like a phonograph record also had its problems.

The peripheral portion of the wafer-mounting portion may be formed as a detachable graphite member covered with silicon carbide.

Extremely wet sticky glutinous rice flour, a small group had to hand-pulling the wet surface, extruded into a wafer shape.

At least once within the past year, Cree executives decided against moving wafer-making outside the U. S.

Ophthalmic surgical blades (734) are manufactured from either a crystalline or polycrystalline material, preferably in the form of a wafer.

Waviness - Widely spaced imperfections on the surface of a wafer.

Minimal Conditions or Dimensions - The allowable conditions for determining whether or not a wafer is considered acceptable.

However, due to manufacturing variances, the frequency response of the FBAR devices may vary slightly across the wafer.

The differential microphone is formed using silicon fabrication techniques applied only to a single, front face of a silicon wafer.

Mounting of the LCD driver wafer on the PCB with gold wires used to connect it to other circuits. It is covered with epoxy.

Disclosed are embodiments of a wafer that incorporates fill structures with varying configurations to provide uniform reflectance.

The empty area includes an area around the wafer and a cut area for dividing the adjacent ICs.

Waves - Curves and contours found on the surface of the wafer that can be seen by the naked eye.

The final Ic is made by sequentially transferring the features from each mask, level by level, to the surface of the silicon wafer.

Electrochemical wafer processing tools are often configured with several different types of chambers to support a processing sequence.

The results show that it is feasibility to simulate the wear and interaction of a nano-particle of the CMP on the wafer with AFM.

The wafer producer noted that the expansions were to keep pace with tier-one customers' expansion requests.

This one looks rather like a sponge: thousands of parallel channels perforate a thin wafer of silicon.

Deposition of nanotubes onto the wafer using a gas vapor required temperatures so high that the circuitry already in place would be ruined.

The slicing method of the invention is capable of implementing high area utilization efficiency of the photovoltaic wafer.

The invention relates to a wafer-level lens module and a manufacturing method thereof.

Researchers view each hair-thin wafer of brain tissue under a microscope outfitted with a laser for precision dissection.

and a plurality of column holes are formed in the silicon wafer platform for leading the telescopic vacuum columns to penetrate through.

The silicon wafer comprises a silicon substrate, an insulating layer, at least one electric element and at least one perforating hole.

The invention provides a silicon wafer cross-connecting device and a silicon wafer cross-connecting method thereof.

A number of companies around the world are developing or have begun offering devices processed and packaged in the wafer format.

It specializes in an unusual kind of wafer, making it hard to share research and development costs with other companies.

Researchers took a 200-millimeter silicon-wafer chip and drilled a 3-nanometer-wide hole (known as a nanopore) through it.

Small manufacturers, many of which operate on wafer-thin margins, are faced with a simple choice, go up the value chain, or go bust.

and with the increase of the number of wafer the flow factor decrease.

Generally all defects found on a mask need to repair, despite the fact that many of them would not cause problems on wafer.

The invention discloses a silicon wafer with perforating holes and a manufacturing method thereof.

MEMC has been a pioneer in the design and development of wafer technologies over the past four decades.

Slip - A defect pattern of small ridges found on the surface of the wafer.

Lithographic tools for transferring Lilliputian circuitry onto a wafer cost up to $50m a pop.

Normally silicon wafers are cut from a larger piece of silicon. This wastes about half of the wafer material.

A magnetic head includes a wafer substrate and a conductive underlayer formed directly on the substrate.

Yet the company is one of the largest solar silicon ingot and wafer producers in China.

The wafer is a piezoelectric resonator, expanding and contracting in response to electrical voltages at a precise, extremely high frequency.

The temperature variation in the internal- mat of wafer-board during hot-pressing is supervised with a temperature sensor.

Localized Light-Scatterer - One feature on the surface of a wafer, such as a pit or a scratch that scatters light.

French figure skater Philippe Candeloro dressed up as a giant chocolate ice cream, complete with a wafer-covered cone.

The Endura platform is a modular, configurable system used to deposit metals and metal alloys on the wafer.

This strategy also eliminates the high cost of owning and operating a semiconductor wafer fabrication facility.

Practical divergent angle is evaluated by the derivative of the standard wafer's grazing exit Xray fluorescence curve.

Proficient in IC design , wafer fab process , test program development, failure analysis, yield improvement and data characterization.

A silicon wafer chip manufacturer tries to close a deal with a solvent service company.

the chip label images are transferred on a chip cutting protecting ring of a wafer, so as to form a chip label.

Mound - A raised defect on the surface of a wafer measuring more than 0. 25 mm.

Besides, the cleaning device can prevent a wafer from scratching and can also prolong the service life of the polishing pad.

Since ASMC's founding, it has dedicated itself to providing niche wafer foundry manufacturing services for semiconductor companies.

Such components are actually networks of interconnected components manufactured on a single wafer of semiconducting material.

Particle - A small piece of material found on a wafer that is not connected with it.

On the growth, IC packaging and testing, wafer material, manufacturing without DRAM and substrate industries are steady growing industries.

Crater - Visible under diffused illumination, a surface imperfection on a wafer that can be distinguished individually.

Flat - A section of the perimeter of a wafer that has been removed for wafer orientation purposes.

It's suitable to have shell test and seal test for flanged end butterfly valves and wafer type butterfly valves.

A laser beam is focused into an inorganic recording material applied on top of a silicone wafer.

Motion control system of an ultra precision wafer stage with application to integrated circuit production was presented.

This work presents a novel method based on the plate wave sensor for in-situ monitoring of the thickness of a wafer during wet etching.

Contamination Area - An area that contains particles that can negatively affect the characteristics of a silicon wafer.

Custom fixtures adapt the devices, which can be wafer, packaged parts, or connectorized modules, to the RI universal interface.

A first defective area in a first wafer is found, and analog characteristics of defective bits in the first defective area are measured.

The adhesion conducting wire is used to connect the adhesion mat of the wafer with the adhesion mat of the circuit board unit electrically.

The invention also relates to a component which is produced on the basis of a wafer which has been treated in this manner.

The part is available in a 32-lead lead frame chip scale package (LFCSP), and a 25-ball wafer level chip scale package (WLCSP).

Semiconductor capital equipment, wafer and chip manufacturers and distributors.

Facet recommends using their wafer style repack coalescers since they allow the first two sections to be replaced when required.

These are tiny pieces of a superconducting material consisting of a niobium film on an aluminium oxide wafer with gaps etched into it.

The accommodating buffer layer is lattice matched to both the underlying silicon wafer and the overlying monocrystalline material layer.

Wafer-level IC test probe card is mainly used in the test of chips electric characters before packaging.

Lay - The main direction of surface texture on a wafer.

It delivers slurry to the wafer workpiece and provides part of the mechanical action in the CMP process.

With a flange less (wafer) or single flange body and wide variety of seals, it can be used in most industry applications.

Today CPUs are manufactured from silicon; one wafer from a silicon ingot can hold hundreds of chips, also called microprocessors.

"The segment most likely affected by the policy are local panel and wafer makers, especially the smaller ones, " Wu said.

Today CPUs are manufactured from silicon; one wafer from a silicon ingot can hold hundreds of chip, also called microprocessors.

Finally, by combining wafer bonding technology with other processes, a micro fluidic chip for hemocytometer is prepared.

One should cover the resistance with metal layer, to avoid the damaged during the wafer level testing.

Nearly any bevel angle can be machined into the wafer which remains after etching.

Finally, this paper primarily establishes a testing method of characterization silicon carbide wafer quality.

John Atta Mills was sworn in as Ghana'snew president after a wafer-thin victory in a run-off against the former ruling party's candidate.

The wafer dicing was accomplished in the Nano-Electro-Mechanical-Systems Research Center of National Taiwan University.

From the basket of bread made without yeast, which is before the Lord , take a loaf, and a cake made with oil, and a wafer.

Quantum Wafer is an environment-friendly green technology company.

In a wafer into the appropriate filling, made into dumplings, and then into the water boiled.

After an analysis of the process of semiconductor fabrication, a proposal of the wafer dicing using micro-abrasive waterjet is put forward.

Analysts say other wafer makers could step in and benefit from a rise in orders.

Roughness - The texture found on the surface of the wafer that is spaced very closely together.

Like a crossing guard, the wafer sends the cells in different directions.

Ideally, all devices formed in a wafer would have the same resonance frequency.

The inspection project please refer "Sputter Station Inspecting Specification" to check the wafer and run-card.

Tours Powerchip Semiconductor Corporation's twelve-inch wafer plant in . . . . County.

A disruption in silicon wafer production can then stall makers of memory chips and, ultimately, consumer products.

The drilling machine for large glass wafer processing is a production machine for silicon pressure sensors.

Wafer slicing would increase to 500MW by the end of the second quarter, with further capacity expansions in the planning stage.

Finally, a simulation model based on an actual wafer fab was built to compare CMRA with the existing scheduling method in the fab.

The assembly of MOSFET is consisted of five main processes, which are wafer sawing, die attach, wire bond, molding, trim and form.

Donor - A contaminate that has donated extra "free" electrons, thus making a wafer " N-Type " .

Cutting groove grids on wafer surface in a special size and shape depends upon the costumers needs.

At present, the proposed method has been applied to the actual wafer fab with better performance.

The new Chinese Oreo was four layers of crispy wafer filled with vanilla and chocolate cream, coated in chocolate.

Depletion Layer -A region on a wafer that contains an electrical field that sweeps out charge carriers.

In one variant of this process the bumps are etched onto the tape rather than deposited on the wafer.

Other typical low current measurements on wafer level semiconductors are related to the dielectric, either the oxide or compound quality.

pick up the corresponding wafer from the normal process flow when the after mass loss value is more than the mass loss safety value.

All valves should have flanged connections. Flangeless, wafer or lugged flange style control valves shall not be used.

As showed in figure 1 below, this increase in capability then allow the street size to be reduced down to 26um, allowing more die per wafer.

Lab 1 apparatus: hot plate heater with silicon wafer (right), connected to a temperature probe (left).

The tuning fork is fabricated from a single wafer of monocrystalline piezoelectric quartz by chemical etching.

ZHANG Y X. Study on surface layer damage in monocrystalline silicon wafer induced by ultra-precision grinding[D].

The new device is a silicon wafer about the shape and size of a playing card.

We are mainly engaged in the designing, producing, sales and providing services of Solar Silicon ingots, Wafer, Solar cell and Solar module.

Haze - A mass concentration of surface imperfections, often giving a hazy appearance to the wafer.

Main customers for the red, green, blue, orange, yellow, Yellow-green, purple, white and other colors and low-cost chip and wafer-edge.

Each diode is cut from a wafer of crystals layered over a base of silicon or sapphire.

YMS-50 Laser cutting machine special used in cutting for solar cell and semiconductor silicon wafer.

The wafer level packages meet both the trend and low cost requirement. The wafer level packages get popular in market.

Connection type for V type ball valve is of wafer flanged connection.

Using silicon wafer as substrate makes compatibility with IC technology possible.

The conduct trace, conduct belt and test welding point are deposited on the empty area in the wafer during * IC on the wafer.

Isopropyl alcohol (IPA) remains inside nano-pore structure on the wafer surface after wafer is cleaned.

Further growth of continuous compound semiconductor thick films (15) or wafer is achieved by epitaxial lateral overgrowth using HVPE.

In many export industries, particularly steel, margins are already wafer-thin.

Ingot- and wafer-makers hope a surge in the silicon supply will expose a lack of capacity in their fields.

Such light gloomy mood in full wafer silver world happiness under cover many appear insignificant!

The silicon wafer is tacked with tiny pillars that catch abnormal cells that are, in the end, potentially cancerous.

In India, there's the Gujarati pancake. Crispy and wafer-thin, it comes stuffed with spicy potatoes and yogurt.

The microscope comprises a silicon wafer filter membrane which is highly- planar and does not fluoresce.

First, for the thermal analysis, a 2 " wafer model is established to simulate the temperature field after the laser lift-off process. "

Sachet product, packing product, Wafer, Bread, Soap, Mosquito Coils.

Transport steady. Can reduce wafer broken rate arising from transport hard contact.

These valves have better flow than lift checks and most often use a wafer body for low cost and easy installation.

By moving to 25nm technology, manufacturers can double the number of bits stored on a wafer.

Wafer was on the Mavs' radar last summer, but instead of playing in the NBA, signed with Olympiakos in Greece.

A passive brake is composed of braking jaw, passive friction wafer assemblage and braking disc.

Examples of high saturated fat snacks include cookies, wafer biscuits, cakes, egg tart etc.

The slurry is a mixture of erosion solution having an affinity for wafer and sub-micro-scale abrasive.

According to the present invention, defects of traditional wafer bonding process can be avoided.

Plural dies having plural second posts corresponding to the first posts are placed onto the mother device wafer.

With huge oversupply in some industries, and big rises in raw materials costs, many manufacturers are having to endure wafer-thin margins.

In order to accomplish automatically transmission of the wafer during test, a manipulator with synchronous belt transmission is designed.

The wafer is fixed to the transporting arm through the suction holes.

Quantum Wafer makes mainly semiconductor wafers.

Its main wafer plant in Shirakawa was damaged by the earthquake, and the factory is down.

This is of ten the case when switching several Source-Measure Units (SMUs) to multipin devices or wafer level semiconductor measurements.

Espresso Croquant and vanilla Dream ice cream , cream, chocolate shavings , cocoa and wafer biscuit .

Through the silicon bonding, we achieve a wafer-level vacuum package, and the wire-bonding PAD is made after the fabrication is complete.

Bond strength is an important parameter for wafer bond.

Such being the case, the bare silicon wafer CMP has progressed toward planarization polishing or CMP for LSI devices.

So reduction of wafer thickness offers cost-reduction potential.

Attribute to SOI wafer and deep reactive ion etching technology used, the fabrication process of the sensor is easy to control.

Analyze the monthly rolling forecast, work out the wafer plan.

Note: Wafer body will mate with ANSI or ISO flanges. O. D. of wafer body notched to fit ISO bolt circle.

Etch - A process of chemical reactions or physical removal to rid the wafer of excess materials.

Disclosed is a method and system for testing IC in wafer stage by using passive electric network.

A structure and method for fabricating imagers that detect light from the backside of the wafer.

Style G wafer style body valves are designed with flange less bodies with relatively short face-to-face dimensions.

Spermatogonial stem cells with DsRed2 expression were detected on frozen section of testis from the recipient mouse 6 wafer transplantation.

Cycle time is a key performance index for wafer foundries and should not be ignored in their tool planning.

Fat slabs of foie gras, accompanied by wafer-thin toast and rocket salad, arrive.

There are three procedures in LED production, namely epitaxial wafer, tube core and encapsulation.

8226; Production in IC, Semi-conductor, IC Chip, Wafer, LCD, Embedded Systems, electronic components and other IT components etc.

Base Silicon Layer - The silicon wafer that is located underneath the insulator layer, which supports the silicon film on top of the wafer.

Maintain record for wafer receiving and wafer issuing in system.

Research progresses in recent 10 years in metallic microcontamnation of silicon wafer during wet cleaning are briefly reviewed.

Low cost is assured by trimming and calibration at the wafer level.

Considering that a single experimental run in a wafer fabrication facility can take from hours to days.

An image of the patterns on the mask is projected onto the resist-coated wafer , which is many centimeters away.

Spreading Machine: Spread the cream or chocolate on wafer sheets according to the PLC instruction.

Different catalysts coat each side of the wafer.

High performance Robust Panel PC with IP-65 protection on dust and wafer ideal for PC based machine control.

As one of the newly-emerged enabling technologies, wafer direct bonding has been playing key roles in more and more fields.

Die: Integrated circuit chip as diced or cut from a finished wafer.

The micro machinery commonly is formed by a semiconductor substrate such as a silicon wafer.

In 2006, SMIC began construction of a 300-mm wafer fab in Wuhan Hubei Province, China.

Handle the returned wafer from the customer and coordinate FA.

Making integrated circuits involves depositing layers of materials such as semiconductors and metals on a silicon wafer.

Hot plate with silicon wafer lowered to heating position.

SEM studies show that on the wafer substrate, the film is smooth and dense.

There is a deflection angle between axis of friction rod and circular center of friction wafer.

The top one is the wafer lift cable (optional).

Mr. Yong Liu has more than 15 years ofoperations management experience at semiconductor wafer and solar cellmanufacturing facilities.

Taiwan's semiconductor companies had to bid for one of three quotas to build less-advanced 8-in wafer fabrication plants in China.

The new company will continue producing semiconductors on a 300 mm wafer line and use a 65nm production process.

Wafer body features four alignment holes.

In addition, I also plant the production of stainless steel filters, stainless steel mesh filter wafer and other components.

thin folded wafer containing a maxim on a slip of paper.

Chuck Mark - A mark found on either surface of a wafer, caused by either a robotic end effector, a chuck, or a wand.

A kind of wafer capsule formerly used by pharmacists for presenting an unpleasant-tasting drug.

MSS SP-67 Covers Butterfly Valves of the Single Flange Type (Lug Wafer).

using IPA and deionized water to clean the wafer surface.

The wafer design also means extra valve strength.

Based on the invention, a plurality of ICs are formed on the semiconductor wafer during * process.

Shown here is a photomask, which bears the patterns that will be printed onto a wafer.

Hand Scribe Mark - A marking that is hand scratched onto the back surface of a wafer for identification purposes.

Smudge - A defect or contamination found on the wafer caused by fingerprints.

The wafer face-to-face design saves pipeline space, is lightweight and is easy to install.

and out the disk drive came a tiny white wafer .

To dispatch the daily special wafer out target.

Wafer Check Valve is a universal one-way flow valve.

Hua luoji crystal perfect cutting, deduce women to dream wafer.

I was working for silicon wafer manufacturing of Semiconductor for 25 years and then quit this company.

Each processing tool must have a defined goal for wafer throughput.

Receive partial wafer from line.

Suggested Use: 1 chewable wafer daily, or as recommended by your health care professional.

Oreo chocolate Wafer is a new member of the family.

A typical plant will churn out 3, 000 silicon wafers every hour, with each wafer forming one solar cell.

and cutting the wafer to form the fragmented chips.

The argument continues that the creation of wafer fabs would have a "catalytic impact on the development downstram and upstream products. "

It takes around 13 cubic metres of freshwater to produce a single 200mm semiconductor wafer, for example.

Maximum wafer size is 6 inch and the minimum feature is 50 nanometer. The accuracy of alignment and stitching is 20 nanometer.

Also, VGF and VB-based substrates made up 64 percent of wafer output in 2007 and this will increase to 75 percent through 2012.

but they would have a wafer-thin equity cushion.

Test Wafer - A silicon wafer that is used in manufacturing for monitoring and testing purposes.

and the wafer (6) is coated with two separate silver films (2).

Scratch - A mark that is found on the wafer surface.

The gas outlet holes (74, 75) and gas channels (70, 80) are configured to support a wafer using the Bernoulli principle.

Crack - A mark found on a wafer that is greater than 0. 25 mm in length.

All the parts and motion are cooperating with each other; it can make the wafer available.

It is a business of minute precision, given that one wafer can yield 100, 000 chips.

A chip , on the other hand, is a silicon wafer that a core resides on.

Front Side - The top side of a silicon wafer. (This term is not preferred; use front surface instead. )

Calculation and analysis of light scattering and differential scattering cross section from a spherical particle on silicon wafer

a catcher adapted to contact and travel passively with a wafer as it is unloaded from the processing portion;

Study of Silicon Wafer Cleaning Effects Using Clean Solutions Containing Surfactants and Chelates

Compound Priority Control Strategy and Its Applications in Semiconductor Wafer Fabrication

Can is equipped with a variety of different frequencies, different wafer size twin probe using;

Among the many steps are four in which the Japanese are indispensable: wafer processing;

Low Temperature Wafer Bonding Technology and Its Applications to Telecommunications Optoelcetronic Devices

The Bottleneck-Oriented Dispatching Strategy and Parameter Optimization in Semiconductor Wafer Fabrication System

connector terminal bar connector Housing wafer wire harness space rated voltage rated current contact resistance insulation resistance

Design and Manufacture on Precision Positioning System of Wafer Stage for a Simulated Macro-motion System of Lithography

Study on the Synchronizing Control and Wafer Deformation Error Compensation Technology for Step Scanning Photoetching Machine

Piezoelectric Wafer Model and its Application in Structural Health Monitoring

Design principles and maintenance of four-pin-probe electrodynamic instrument for semiconductor wafer evaluation