单词 | virtual prototype |
释义 | 例句释义: 虚拟样机,虚拟原型,虚拟样机技术,数字模型即虚拟样机 1. The validity research of this kind of virtual prototype has a guiding significance on the design and manufacturing of light arms equipment. 这种虚拟样机的有效性研究时轻武器装备的设计和制造具有指导意义。 www.ceps.com.tw 2. With proper signal adjusting, different actual units can interacted with radar virtual prototype expediently in virtue of the system. 不同的实装操作部件经过适当的信号调理均可以通过该系统方便地实现与雷达虚拟样机之间的交互。 www.ceps.com.tw 3. In terms of multi-rigidity-body kinetic theory, kinetic emulating analysis is done to the virtual prototype module of high-speed machine. 根据多刚体动力学理论,对高速机床的虚拟样机模型进行动力学仿真分析。 www.chemyq.com 4. The results of dynamic simulation show that the virtual prototype model of the planet-cycloid reducer is valid and reliability. 仿真分析结果表明,提出的摆线针轮减速机虚拟样机建模正确,有较好的可靠性和实用价值。 www.ceps.com.tw 5. The virtual prototype simulation analysis of this kind of pipe robot was also made. 同时,对该管道机器人进行了虚拟样机仿真分析。 airiti.com 6. Rotational speeds, meshing forces, and meshing frequencies of the gears are obtained by dynamic simulation of the virtual prototype. 对虚拟样机模型进行动力学仿真,得到各级转速、齿轮啮合力及啮合频率。 epub.cnki.net 7. To set up integrated virtual prototype model more rapidly, a component-based collaborative assembly method was presented. 为快速建立集成化虚拟样机模型,提出了一种组件化协同装配方法。 dictsearch.appspot.com 8. This dissertation is concerned with the research and development of the RF system of a compact cyclotron on a virtual prototype platform. 本文是在虚拟样机平台下的回旋加速器高频系统的研究与设计。 www.fabiao.net 9. Finally the author has operated the virtual prototype smoothly, and obtained more satisfactory results about dynamic simulation. 最后作者通过模拟工况的基本条件顺利的运行了虚拟样机,并得出了较为满意的动态仿真结果。 paper.pet2008.cn 10. The virtual prototype of the vibration device of block forming machine was developed with the CATIA software. 采用CATIA软件开发了砌块机振动装置的虚拟样机。 www.ceps.com.tw 1. Thirdly, the establishment of virtual prototype and analysis of Kinetic Characteristics. 第三,虚拟样机的建立和运动学特性分析。 www.fabiao.net 2. Virtual prototype technology(VPT) applied in axial piston pump simulation research was introduced. 介绍了虚拟样机技术在轴向柱塞泵仿真研究中的应用。 www.cmemo.org.cn 3. based thorough analysis in space docking dynamics and loop control , test - bed ' s virtual prototype is presented in paper. 基于对空间对接动力学和大回路控制的深入分析,文章建立了对接机构综合试验台的虚拟样机。 www.ichacha.net 4. The subject is a part of SMT2520 research and development project. The subject uses Virtual prototype. 本课题是全视觉电子元件贴装设备(简称贴片机)研制项目的一部分。 www.fabiao.net 5. A scheme is proposed that can speed the building of mechanical product virtual prototype considering tribology behavior. 提出了一种包含摩擦学行为的机械产品虚拟样机快速实现方案。 www.juhe8.com 6. The Virtual Prototype (VP) technology applies a powerful development measure to solve these problems. 虚拟样机技术为解决这些问题提供了强有力的开发工具和手段。 www.juhe8.com 7. The application of ADAMS can help users to conveniently analyze virtual prototype in kinematics a nd dynamics. 运用ADAMS软件,用户可以很方便地对虚拟样机进行静力学、运动学和动力学分析。 www.magsci.org 8. The basic research of project management system, COSIM-PM is introduced, which supports the complex virtual prototype engineering. 主要介绍了正在研究和开发的,支持复杂虚拟样机工程的项目管理系统COSIM-PM。 www.dictall.com 9. PC passes the response of the object to the virtual prototype hardware platform. 上位机同时还将制约对象的响应传给虚拟样机硬件平台。 www.zidir.com 10. Meanwhile the motion theory of grain in the 3-DOF air-and-screen cleaning device virtual prototype deduced above is verified. 同时验证了前述所推导的颗粒物料在三自由度风筛式清选装置虚拟样机中的运动理论。 www.13191.com 1. Introduction and enhancement of ADAMS-virtual prototype technology[M]. Beijing: China Machine Press, 2002. ADAMS-虚拟样机技术入门与提高[M]。北京:机械工业出版社,2002。 elec.wanfangdata.com.cn 2. The virtual prototype can also be generated by a kind of geometric modeling that is specialized for that purpose. 虚拟原型也可由专为此设计的某类几何建模系统来产生。 www.kancaimi.cn 3. ADAMS, and establish virtual prototype of the working device. 建立了工作装置的虚拟样机。 www.boshuo.net 4. IP virtual prototype machine uses the universal data format and encapsulating method, but doesn't use the special data format like VINT etc. IP虚拟原型机没有象VINT等专业化虚拟测试平台一样使用专用的数据格式,而是采用了通用的数据报格式和封装方法。 www.digimanusci.com 5. The basic connotation of artillery virtual prototype was depicted. 在阐述火炮虚拟样机技术基本内涵的基础上。 www.ceps.com.tw 6. This method which based on the model of virtual prototype has general applicability to the optimal research of loaders' working device. 这种基于虚拟样机模型的参数化建模,对于装载机工作装置的设计研究具有普遍的适用性。 www.ceps.com.tw 7. Based on optimum project of design theory, virtual prototype of the storage ammunition system is founded. 依据择优方案的设计原理,建立了该弹库系统的虚拟样机; paper.pet2008.cn 8. Solid-liquid coupling virtual prototype of axial piston pump was put up based on the interface of the two models. 利用二者模型的底层接口,搭建了液固耦合的轴向柱塞泵虚拟样机模型。 www.cmemo.org.cn 9. The dynamic performance of roller coaster under different wind force was studied based on technology of virtual prototype. 研究基于虚拟样机技术在不同风力下过山车的动态性能。 www.ceps.com.tw 10. Virtual prototype hardware platform communicates with controller via RS-485 serial bus. 虚拟样机硬件平台与上位机之间通过RS-485串行总线进行通信。 www.zidir.com 1. In this paper, based on virtual prototype of workspace determination for parallel manipulator, a new method is put forward and analysed. 提出了基于虚拟样机的并联机器人工作空间的求解方法,分析了其实现过程。 www.ceps.com.tw 2. Then, the virtual prototype for the washing machine is built using the software of ADAMS. 继而,在ADAMS环境下,建立滚筒洗衣机的虚拟样机。 soso.361xs.com 3. Roadheader built a virtual prototype model of cutting unit. 构建了掘进机截割部虚拟样机模型。 goabroad.zhishi.sohu.com 4. Its mathematical model and the virtual prototype are established based on the dynamics simulation software ADAMS. 给出了此缓冲器的数学模型,并基于动力学仿真软件ADAMS建立了该缓冲器的虚拟样机; www.ceps.com.tw 5. A virtual prototype has been built based on ADAMS and use the virtual prototype technology to make simulation of stamping process curves. 基于ADAMS进行虚拟样机建模,利用虚拟样机技术进行冲压工艺曲线的数值仿真实验。 www.zidir.com 6. The application of virtual prototype brings people a convenient and efficient way to design the aero-engine. 虚拟样机技术的应用为航空发动机设计提供了一种方便、有效的途径。 www.ceps.com.tw 7. The fuze componental models are validated with a standard sphere. At the end, the development of the virtual prototype is described. 并以标准球为目标信号验证了引信部件模型,最后简述了虚拟样机技术的发展趋势。 dictsearch.appspot.com 8. In the paper, this problem of motor selection for robot design based on virtual prototype technology is solved. 针对仿人机器人设计中电机选型的问题,提出基于虚拟样机技术的电机选型方法。 www.dictall.com 9. Virtual prototype of friction elements in armament is set up by use of ADAMS software. 利用ADAMS软件建立装备操纵摩擦元件虚拟样机。 www.dictall.com 10. The model of the whole machine of Backhoe loader WZ30-25 was set up based on the virtual prototype technology and ADAMS software. 将虚拟样机技术与ADAMS软件相结合,建立了挖掘装载机WZ30-25的整机参数化模型; www.ceps.com.tw 1. Based on the virtual prototype, the method how to update the counterweight and to optimize the structural design is carried out. 基于虚拟样机,对悬挂系统配重的修正方法、结构参数的动态优化设计等进行一系列规范化研究; soso.361xs.com 2. Virtual prototype of a midibus and investigation to its handling stability 客车的虚拟样机模型和操纵稳定性研究 www.ilib.cn 3. Analysis of the application of a double mass system vibration to screening equipment by virtual prototype technique 用虚拟样机技术分析双质体振动在筛分设备中的应用 www.ilib.cn 4. Dynamics Simulation of Rifle Launching of Certain Missile by Means of Virtual Prototype Technology 基于虚拟样机技术的某型导弹来复线发射动力学仿真 www.ilib.cn 5. Simulation and Optimization of a Tipper Lifting Mechanism Using Virtual Prototype Technology 基于虚拟样机技术的自卸车举升机构仿真与优化 ilib.cn 6. Computational Grid and Its Application Research in the Collaborative Environment of Virtual Prototype 计算网格及其在虚拟样机协同环境中的应用探讨 www.ilib.cn 7. Research on heterogeneous product structure information integration in virtual prototype engineering 复杂产品虚拟样机异构的结构信息集成研究 ilib.cn 8. Research on Implementation Approach of Hydro-mechanical Transmission System Multi-disciplinary Virtual Prototype 液压机械传动多领域虚拟样机实现策略研究 www.ilib.cn 9. Virtual Prototype to be A Key Technique for Development of New Low-Voltage Apparatus 虚拟样机成为开发新型低压电器的关键技术 www.ilib.cn 10. Research on Virtual Prototype Technology of Mechanical and Electrical Products and Its Prospects 机电产品虚拟样机技术研究与展望 ilib.cn 1. Implementation of Virtual Prototype of an Automobile Air Conditioning Compressor 汽车空调压缩机虚拟样机的设计研究 168.160.184.78 2. Heave Compensation Equipment Virtual Prototype Practicing Technology in Deep-ocean Exploitation System 深海开采系统升沉补偿装置虚拟样机实践技术 service.ilib.cn 3. Modeling and Reality of the Virtual Prototype for Numerical Control Machine Tool Under Integrated Environment 集成环境下数控机床虚拟样机的建造与实现 ilib.cn 4. Research and Implementation of the Virtual Prototype Technology for Aircraft Maintenance 飞机维护虚拟样机技术研究与实现 www.ilib.cn 5. Virtual Prototype Technology and Its Application in Mechanism Designing 虚拟样机技术及其在机构设计中的应用 www.ilib.cn 6. Research of Virtual Prototype Collaborative Development Platform Technology for Complex Product 复杂产品虚拟样机协同开发平台技术研究 www.ilib.cn 7. Model theory and virtual prototype of a new type of parallel-link coordinate measuring machine 并联坐标测量机建模理论及其虚拟原型设计 www.ilib.cn 8. The Acceleration Simulation of Multi-disciplinary Virtual Prototype of Hydro-mechanical Transmission System 液压机械传动多领域虚拟样机加速性仿真研究 ilib.cn 9. Integration and Application of Modeling Tools in Virtual Prototype Collaborative Modeling Environment 虚拟样机协同建模环境中建模工具的集成与应用 www.ilib.cn 10. Research on Multidisciplinary Cooperative Design in Virtual Prototype Environment 关于虚拟样机环境下领域协同设计的研究 ilib.cn 1. Kinematics and dynamics simulation of a diesel engine's crank-connecting rod-piston mechanism based on virtual prototype technology 基于虚拟样机技术的柴油机曲轴-连杆-活塞机构运动学、动力学仿真分析 ilib.cn 2. Study on Virtual Prototype Modeling and Co-simulation Techniques for Mechanic-electronic-hydraulic Interacted System 机电液一体化虚拟样机建模与协同仿真技术研究 scholar.ilib.cn 3. Research on Motorcycle Vibration Damping Technology under Virtual Prototype Environment 虚拟样机环境下的摩托车减振技术研究 www.ilib.cn 4. The Dynamic Simulation of the Virtual Prototype of the Two-axes Position Mechanism for Satellite Antennas 卫星天线双轴定位系统虚拟样机动力学仿真 www.ilib.cn 5. The Simulation Study on Electromagnetic Vibrated Seeding Apparatus by Virtual Prototype Technology 电磁振动排种器仿真研究 www.ilib.cn 6. Study on Vibration Mechanism and Measures for Vibration Reducing to the Handle of Cultivator by Virtual Prototype Technology 耕整机扶手架振动机理及减振措施的虚拟研究 www.ilib.cn 7. Analyzing effects of suspension bushing elasticity on vehicle yaw response character with virtual prototype method 用虚拟样机方法分析悬架衬套弹性对整车转向特性的影响 scholar.ilib.cn 8. Simulation Experiment of Virtual Prototype Kinematics for Parallel Manipulators 并联机器人机构的虚拟样机运动仿真实验研究 scholar.ilib.cn 9. Research on the Key Technology of Collaborative Simulation Platform Supporting Virtual Prototype 支持虚拟样机的协同仿真平台关键技术研究 service.ilib.cn 10. Model Establishment and Simulation of the Air Suspension Automobile Based on Virtual Prototype Technique 基于虚拟技术的空气悬架汽车的建模及仿真 www.ilib.cn 1. Research on Simulation of a Certain Vehicle's Performances Based on Virtual Prototype Technology with Adams ATV 基于虚拟样机技术的某车辆性能仿真研究 www.ilib.cn 2. Analysis of Brake Dynamics of Tractor-Semitrailer Combinations With Virtual Prototype Technology 应用虚拟样机技术进行半挂汽车列车制动动力学分析 ilib.cn 3. A Method to Develop Mechanical Product Virtual Prototype Considering Tribological Behavior 考虑摩擦学行为的机械产品虚拟样机实现方法 ilib.cn 4. The System Simulation Technology Based on a Virtual Prototype and its Application in the Development of a Mechanical fuze 基于虚拟样机的系统仿真技术及其在机械引信研制中的应用 ilib.cn 5. Research into Virtual Prototype Modeling for Electromechanical Products 面向机电产品的虚拟样机建模方法研究 ilib.cn 6. Research of Wrapping and Publishing Simulation Models in Virtual Prototype Engineering for Complex Product 虚拟样机工程中仿真模型包装与发布机制 www.ilib.cn 7. Cooperative Developing Technology of Virtual Prototype of Mechanical Products 机械产品虚拟样机协同开发技术 service.ilib.cn 8. Implementation Of Distributed Simulation for Flight Vehicle Virtual Prototype 飞行器虚拟样机分布仿真实现 www.ilib.cn 9. Heterogeneous Modeling and Simulation for Virtual Prototype of Electro-Mechanical Systems 机电一体化系统虚拟样机的异构建模和仿真 www.ilib.cn 10. Organization and Expression of Knowledge for Intelligence Diagnosis System Base on Virtual Prototype 基于虚拟样机的智能诊断系统知识组织与表达 ilib.cn 1. Research on Information Integration of Collaborative Virtual Prototype 协同虚拟样机的信息集成研究 www.ilib.cn 2. Research on component-based collaborative assembly technology for virtual prototype unit 组件化虚拟样机单元协同装配技术研究 ilib.cn 3. Discussion on the Modeling of Virtual Prototype for the Crawler Chassis of Self-propelled Sea-bed Service Vehicle 自行海底作业车履带式底盘虚拟样机建模探讨 ilib.cn 4. Research on technology of virtual prototype used in flying vehicle design 虚拟样机技术在飞行器设计中的应用 service.ilib.cn 5. The calculation and analysis method for the model and the virtual prototype of the column-roller cam in space 空间滚柱凸轮曲面建模及虚拟样机计算处理方法 ilib.cn 6. Application of virtual prototype technology in fully mechanized equipment mating design 虚拟原型技术在综采配套设计中的应用 www.ilib.cn 7. Virtual Prototype Simulation and Reliability Analysis of Space Station Expand Mechanism 空间站展开机构虚拟样机仿真及可靠性分析 www.ilib.cn 8. A Study of Shock Absorption Method under the Environment of Virtual Prototype Motorcycle 虚拟样机环境下摩托车减振技术的研究 scholar.ilib.cn 9. Study and Experiment on Virtual Prototype and Its Relating Technology 虚拟样机及其相关技术研究和实践 www.ilib.cn 10. Design of Inertial Loading Brake Test-bed and its Virtual Prototype Simulation 惯性负载制动器试验台设计及虚拟样机仿真分析 ilib.cn 1. Design of Inertial Loading Brake Test-bed and its Virtual Prototype Simulation 惯性负载制动器试验台设计及虚拟样机仿真分析 ilib.cn 2. Roller and Pushing-rod Locking Device for Cable Breaking and the Design of its Virtual Prototype 滚轮顶杆式断缆锁紧装置及其虚拟样机设计 www.ilib.cn 3. Modeling and Simulation of Flexible Parallel Robots Using Virtual Prototype Technology 基于虚拟样机技术的柔性并联机器人建模与仿真 www.ilib.cn 4. Generation of parts for virtual prototype concerning about dimensional tolerance 计入尺寸公差的虚拟样机零件生成 www.ilib.cn 5. Collaborative Modeling Technology of Virtual Prototype for Complex Product 复杂产品虚拟样机协同仿真建模技术研究 www.ilib.cn 6. Mechanical Virtual Prototype Technology and Its Practice on DDM 机械虚拟样机技术及其在DDM中的实践 www.ilib.cn 7. Research on the Ground Pressure Distribution of a Self-propelled Gun Based on Virtual Prototype Technology 基于虚拟样机技术的自行火炮接地压力分布研究 scholar.ilib.cn 8. Research on technology of virtual prototype used in aero-engine design 虚拟样机技术在航空发动机设计中的应用 www.ilib.cn 9. The Research and Implementation of Virtual Prototype in the Top Drive Drilling System 顶驱钻机虚拟样机原型系统研究与实践 202.114.9.36:8001 10. Research on Key Technology of Data Collaboration Supporting Railway Vehicle's Virtual Prototype 铁路机车车辆虚拟样机数据协调关键技术研究 www.ilib.cn 1. Handling stability investigation of air spring suspension bus virtual prototype 空气悬架客车虚拟样机的操纵稳定性研究 www.ilib.cn 2. Application of Virtual Prototype Technology in Deep-ocean Resource Exploitation 深海资源开发装备虚拟样机技术应用研究 www.ilib.cn 3. Virtual prototype technology using in shearer regulating mechanical 虚拟样机技术在采煤机滚筒调高系统中的应用 ilib.cn 4. Application of virtual prototype technology in construction vehicle 虚拟样机技术在工程车辆中的应用 service.ilib.cn 5. Application of Virtual Prototype Technique on the Design and Analysis of the Oil-drawn Machine 虚拟样机技术在抽油机运动学分析中的应用 service.ilib.cn 6. Application of Virtual Prototype Technique in Flight Control Software Development for Air-to-Air Missile 空空导弹飞控软件研制中的虚拟样机应用 www.ilib.cn 7. Research on Design Patterns Simulation Model in Virtual Prototype Multibody Dynamics 虚拟原型多体动力学中设计模式仿真模型研究 www.ilib.cn 8. Virtual-Prototype-Technology-Based Simulation and Study on Ride Performance of Air-Suspension Buses 基于虚拟样机技术的空气悬架客车平顺性仿真研究 ilib.cn 9. Study of kinetics characteristics of belt conveyor based on virtual prototype technology 基于虚拟样机技术的带式输送机动力学特性研究 ilib.cn 10. Virtual Prototype Technology: Connotation and Realization in Development of Machinery Products 虚拟样机技术的内涵及其在机械产品开发中的实现 ilib.cn 1. Virtual prototype of shearer ranging arm and its dynamics analysis 采煤机摇臂虚拟样机及其动力学分析 www.ilib.cn 2. Constraint Models Systems for Virtual Prototype Multibody Dynamics 虚拟原型多体动力学约束模型研究 www.ilib.cn 3. Cooperative Design for Complex Products in Virtual Prototype Environment 基于虚拟样机环境下的复杂产品协同设计 service.ilib.cn 4. Application of Virtual Prototype Technology in the Profile Modeling Spray Equipment for Fruit Trees 虚拟样机技术及其在果树仿形喷雾装置研制中的应用 www.ilib.cn 5. Scheme decision analysis between physical prototype and virtual prototype for laser 激光器虚拟样机与物理样机方案决策研究 www.ilib.cn 6. Simulation of Changing-arrange Track of Four-lever Combined-arm Crane with Virtual Prototype Technique 运用虚拟样机技术对四连杆组合臂架变幅轨迹的仿真研究 www.ilib.cn 7. Research on Application Technology of Virtual Prototype for Controlled Soft Start System 虚拟样机技术在可控软启动系统中的应用策略 ilib.cn 8. Study on model transformation and computer demonstration of virtual prototype 虚拟样机模型转换及演示技术研究 www.ilib.cn 9. Applications of the virtual prototype technology 虚拟样机技术的应用 www.ilib.cn 10. The Application of Virtual Prototype Technology to the Design of Valvetrain in Vehicle Engine 虚拟样机技术在汽车发动机气门机构设计中的应用 www.ilib.cn 1. Virtual Prototype Design for a Mechanism System 一种机构系统的虚拟样机设计 www.wanfangdata.com.cn 2. Research on Implementation Approach of Virtual Prototype for Excavator-robot 挖掘机器人虚拟样机技术的实现策略 www.ilib.cn 3. Application of virtual prototype technique in analysis of vehicle suspension 虚拟样机技术在汽车悬架分析中的应用 ilib.com.cn 4. Application of Virtual Prototype in Characteristic Analysis of Hydraulic Nog 虚拟样机技术在液压支架性能分析中的应用 www.ilib.cn 5. Research and Practice on Complex Products Virtual Prototype Technology 复杂产品虚拟样机技术的研究与实践 www.ilib.cn 6. Application Research of Virtual Prototype Technology to Concrete Pump Truck 虚拟样机技术在混凝土泵车中的应用研究 www.ilib.cn 7. Modeling Method and Model Accreditation of Virtual Prototype Missile System 虚拟样机导弹系统的建模方法与模型确认 www.ilib.cn 8. Firing Dynamic Characteristics of a Dual-purpose Machine Gun Based on Virtual Prototype 基于虚拟样机的某型机枪射击动态性能研究 www.ilib.cn 9. Virtual prototype analysis of concomitant fork truck's stability and passing capacity 随行叉车牵引行驶性能虚拟样机分析 www.ilib.cn 10. The Application of Virtual Prototype Technique on Vibration Reduce of Motorcycle 虚拟样机技术在摩托车降振中的应用 scholar.ilib.cn 1. An Integrated Process Management System for Virtual Prototype of Complex Product 复杂产品虚拟样机集成开发过程管理系统研究 scholar.ilib.cn 2. Virtual Prototype Simulation on Shearer Regulating System 采煤机调高系统的虚拟样机仿真 www.ilib.cn 3. Simulation of Certain Ramming Mechanism Virtual Prototype 某输弹机虚拟样机仿真 ilib.cn 4. Simulation analysis of NC spinning machine on virtual prototype technology 基于虚拟样机技术的数控旋压机仿真分析 www.ilib.cn 5. The Virtual Prototype Solid Modeling and Analysis of Ground Rocket Experiment System 地面火箭试验系统虚拟样机建模与分析 www.ilib.cn 6. Integration and matching of vehicle and engine and virtual prototype technology 汽车与发动机集成匹配与虚拟样机技术 doctor.jlu.edu.cn 7. The Virtual Prototype Design and Simulation of the Reconfigured Eliminating Rust Machine of Steel Pipe 可重构钢管除锈机虚拟样机设计及仿真 www.ilib.cn 8. Application of Virtual Prototype Technology in the Design of Air Spring Suspension System 虚拟样机技术在空气悬架系统设计中的应用 ilib.cn 9. Application of Virtual Prototype Technology in Design of Reinforced Suspension Precalciner 虚拟样机技术在强化悬浮式分解炉设计中的应用研究 ilib.cn 10. Simulation analysis of concrete pump's boom based upon virtual prototype technology 基于虚拟样机技术的混凝土泵车臂架的仿真研究 ilib.cn 1. Simulation of Dynamic Analysis of the Virtual Prototype of the Wobble-motor 斜盘发动机虚拟样机的动力学仿真分析 ilib.cn 2. The virtual prototype development of sugarcane harvester used in hill 适用于丘陵地带的甘蔗收获机械虚拟样机的研制 ilib.cn 3. Research on technology of design virtual prototype of hydraulic excavator 液压挖掘机虚拟样机设计技术研究 service.ilib.cn 4. Realization of CNC machine tool virtual prototype in UG integrated environment UG集成环境下数控机床虚拟样机的实现 www.ilib.cn 5. Study of Virtual Prototype Based on the Series-Parallel Coordinate Measure Robert 基于串并联坐标测量机器人虚拟样机研究 service.ilib.cn 6. Application of virtual prototype technology in the design of automobile engine hood lock 虚拟样机技术在汽车发动机盖锁设计中的应用 ilib.cn 7. Information Management of Virtual Prototype in General Design Phase 复杂产品虚拟样机中初步设计阶段的信息管理 www.ilib.cn 8. Virtual Prototype and Collaborative Simulation of Bionic Knee Joint 仿生膝关节虚拟样机与协同仿真方法研究 www.ichacha.net 9. Simulation of Virtual Prototype of ABS Braking System and Braking Performance 汽车ABS虚拟样机仿真与制动性能的研究 ilib.cn 10. Mechanics of Virtual Prototype of Complex Electromotor Driven Six Link System 复杂六连杆机构的虚拟电拖系统研究 www.ilib.cn 1. The Application of Virtual Prototype Technology in Backhoe Loader Design 虚拟样机技术在挖掘装载机中的应用 scholar.ilib.cn 2. Virtual Prototype Modeling and Simulation Analysis of Machine Gun System 机枪系统虚拟样机建模及仿真分析 www.ichacha.net 3. Description Model and Language of Virtual Prototype in Conceptual Design 面向概念设计的虚拟原型描述模型与语言 ilib.cn 4. Modeling and Dynamic Simulation Analysis for Virtual Prototype of Rammer 输弹机虚拟样机建模与动态仿真 service.ilib.cn 5. The Application of Virtual Prototype Technology in Roller Coaster Design 虚拟样机技术在过山车设计中的应用 service.ilib.cn 6. Research on virtual prototype technology of unloading device for top opening fan gate skip 虚拟样机技术在上开式扇形闸门箕斗卸载装置中的应用研究 www.ilib.cn 7. The research on simulation of virtual prototype and experiment to the libration system of automobile 汽车振动系统的虚拟样机仿真及试验研究 www.ilib.cn 8. Dynamic Virtual Prototype Design of Hypersonic Cruise Vehicle 高超声速巡航飞行器动力学虚拟样机设计 www.ilib.cn 9. Application of Database Technology in the Dynamic Virtual Prototype 数据库技术在动力学虚拟样机中的应用 www.ilib.cn 10. Research on virtual prototype modeling technology for gantry crane 装卸桥虚拟样机建模技术 service.ilib.cn 1. Study on Virtual Prototype Technology in Hydraulic Powered Support 液压支架虚拟样机构建技术的研究 ilib.cn 2. Modeling and Dynamic Analysis of Roller Coaster Using Virtual Prototype 过山车虚拟样机的建模与动态仿真分析 service.ilib.cn 3. Verification, Validation and Certification Based on Virtual Prototype Simulation System 基于虚拟样机的仿真系统校核、验证与确认研究 scholar.ilib.cn 4. Application of Virtual Prototype Technology to the Development of a New Hydro-mechanical Stepless Transmission 虚拟样机技术在开发新型液压机械无级变速器中的应用 www.ilib.cn 5. Virtual Prototype Technology and Dynamic Simulation of Operating Mechanism of Pneumatic Pipe Extruding Machine Based on ADAMS 基于ADAMS的气动压管机工作机构虚拟样机设计与动态仿真 ilib.cn 6. Study on a Virtual Prototype Based Hay Highly Compressing Process 基于虚拟样机技术的牧草高密度压捆过程分析 ilib.cn 7. Tools development in product virtual prototype design system 产品虚拟原型设计系统中的工具开发 www.ilib.cn 8. Multidiscipline virtual prototype top-level modeling language for complex product 复杂产品多学科虚拟样机顶层建模语言研究 ilib.cn 9. Virtual Prototype and Dynamic Behavior Analysis of Deep-ocean Mining System 深海采矿系统虚拟样机及联动特性研究 ilib.cn 10. Development of a Multi-Discipline Oriented Virtual Prototype Based on Conceptual Design Tools 面向多学科虚拟样机的概念设计工具研究 www.ilib.cn 1. Virtual prototype technique of complex machinery 复杂机械的虚拟样机技术 ilib.cn 2. Application of Virtual Prototype Technology on Development of Double-Module Control and Guide System 虚拟样机技术在双模制导系统研制中的应用 www.ilib.cn 3. Realization of Virtual Machining on Virtual Prototype of CNC Machine Tools 数控机床虚拟样机的虚拟加工实现 ilib.cn 4. Research on Virtual Prototype of Hydro-pneumatic Suspension 油气悬架系统的虚拟样机研究 www.ilib.cn 5. Technology of Virtual Prototype for Railway Car Engineering 铁道车辆工程的虚拟样机技术 service.ilib.cn 6. Virtual Prototype Solid Modeling and Application of Heavy Truck Brake 重型汽车制动器虚拟样机的建模与应用 www.ilib.cn 7. Model Theory and Virtual Prototype of a Kind of CMM Using Parallel-link Mechanism 并联坐标测量机理论模型及其虚拟原型研究 www.wanfangdata.com.cn 8. The Emulative Analysis of Vibration Actuating and Direction Change Process of Vibratory Rollers Based on Virtual Prototype Technology 虚拟样机技术的振动压路机起振及换向过程仿真分析 service.ilib.cn 9. Test and Simulation on Virtual Prototype of Hydragas Suspension of Dump Truck 自卸车油气悬挂试验和虚拟样机仿真 service.ilib.cn 10. Virtual prototype technique for agile shell-feeding system 敏捷供弹系统虚拟样机技术 ilib.cn 1. Virtual prototype based kinematic modeling for lunar rover 基于虚拟样机的月球探测机器人运动学建模 www.ilib.cn 2. A Simulation Study on Ride Comfort of a Self-propelled Gun Based on Virtual Prototype 基于虚拟样机的自行火炮行驶平顺性仿真研究 ilib.cn 3. Dynamics Simulation of Articulatory Vibration Screen Based on Virtual Prototype Technology 基于虚拟样机技术的节肢振动筛动力学仿真 www.ilib.cn 4. Research on Design and Simulation of Single Stage Reciprocating Air Compressor Based on Virtual Prototype Technology 基于虚拟样机技术的单级往复式空压机的设计和仿真研究 ilib.cn 5. Dynamic Simulation of the Reciprocating Compressor Based on Virtual Prototype 基于虚拟样机的往复压缩机动力学仿真 ilib.cn 6. Modeling and Simulation Analysis of the Vertical Motor Based on Virtual Prototype Technology 立式电机定、转子虚拟样机建模与仿真研究 www.ilib.cn 7. Analysis to Bend Fatigue Life for Spring Brackets of Air Suspension Based on Virtual Prototype Technology and Finite Element Method 汽车空气悬架弹簧支架的动力学仿真与有限元分析一体化疲劳寿命计算 ilib.cn 8. Study on Development of Productive Cane Sugar Harvester Base on Virtual Prototype Technology 基于虚拟样机技术的产品级甘蔗收获机的开发研究 ilib.cn 9. Performance Characteristic Simulation of Friction Buffer Based on Virtual Prototype 基于虚拟样机的摩擦缓冲器工作性能的模拟 ilib.cn 10. Design environment of virtual prototype for weapon system 武器系统虚拟样机设计环境 www.ilib.cn 1. XML-based Integrated Design of Aircraft Virtual Prototype 基于XML的飞行器虚拟样机总体设计 www.ilib.cn 2. Project Management in Virtual Prototype of Complex System 复杂系统虚拟样机信息管理中的项目管理研究 www.ilib.cn 3. Building and Study on Planet-cycloid Gearing Virtual Prototype 行星摆线针轮减速机虚拟样机模型的建立 www.ilib.cn 4. Virtual Prototype of Six-freedom-degree Parallel Mechanism CMM 并联六坐标测量机的虚拟样机 ilib.cn 5. Analysis of virtual prototype test of a car's braking ability based on the theory of multibody system 基于多体理论的车辆制动性能的虚拟试验的实现及评价 ilib.cn 6. Three-gear Four-bar Mechanism Modeled and Analysed by Virtual Prototype 三齿轮四杆机构虚拟样机分析 ilib.cn 7. Study on Virtual-Prototype-Based Failure Diagnosis of Engine Piston Pin 基于虚拟样机的发动机活塞销故障诊断研究 ilib.cn 8. Shaper Mechanism Analysed by Virtual Prototype 牛头刨床机构虚拟样机分析 www.ilib.cn 9. Applications of Virtual Prototype Technique in Construction Ma-chinery Domain 虚拟样机技术在工程机械领域的应用 www.ilib.cn 10. Research on Multibody Dynamics Simulation Model Based on Virtual Prototype Implemented by Component 基于组件的虚拟原型下的多体动力学仿真研究 service.ilib.cn 1. Dynamic Characteristic of Compressor Crankshaft Based on Technique for Virtual Prototype 基于虚拟样机技术的压缩机曲轴动态特性研究 www.ilib.cn 2. Test verification of virtual prototype based on maximum entropy spectral estimation mirror image mapping 基于镜像映射最大熵谱估计的虚拟样机实验验证 scholar.ilib.cn 3. a virtual prototype model of five - axis gantry machining - center 五坐标龙门加工中心虚拟样机的建立 www.ichacha.net 4. Technique for Dynamic Virtual Prototype of Aircraft 飞机动力学虚拟样机技术 service.ilib.cn 5. The Vibration-Reduced Design of the Engine of the Motorcycle Based on the Virtual Prototype Technology 采用虚拟样机技术的摩托车发动机减振设计 www.ilib.cn 6. An Innovative Method of Determining the Kinetic Friction Coefficient Based on the Virtual Prototype of Runaway Escapement 基于虚拟样机的无返回力矩钟表机构动摩擦系数确定方法 www.ilib.cn 7. Credibility Evaluation of Complex Virtual Prototype System Based on Feature Similarity Theory 基于特征相似论的复杂虚拟样机系统置信度评估 ilib.cn 8. Simulation Study on the Anti-Interrupting of Trip Unit in Moulded Case Circuit Breaker Based on Virtual Prototype Technology 基于虚拟样机技术的塑壳断路器拒分现象仿真分析 www.ilib.cn 9. The study of weight self-balancing of portal crane with virtual prototype technology 用虚拟样机技术研究门座起重机的自重平衡 ilib.cn 10. The Kinematic Characteristic Simulation of Axial Piston Pump Based on Virtual Prototype Technology 基于虚拟样机技术的轴向柱塞泵运动特性仿真分析 ilib.cn 1. Vibration characteristic analysis of vibration-impact rammer based on virtual prototype 基于虚拟样机技术的振动冲击夯振动特性分析 service.ilib.cn 2. Dynamical Simulation and Optimization of Shafting Based on Virtual Prototype Technology 基于虚拟样机技术的轴系动力仿真及优化 ilib.cn 3. Automatic Structural Parameters Optimization for Machine Gun Based on Virtual Prototype 基于虚拟样机的机枪自动机结构参数优化 www.ilib.cn 4. Integrated Design Based on Virtual Prototype and Its Application 基于虚拟样机的一体化设计技术及其应用 www.ilib.cn 5. Virtual prototype of underwater self-reconfigurable system 水下分散自重构系统虚拟原型 service.ilib.cn 6. Visualization on the Virtual Prototype of Solid Missile 固体导弹总体方案论证可视化技术 www.ilib.cn 7. Virtual Prototype Model for Overall Design of Missile System 支持导弹总体设计的虚拟样机模型初探 www.ilib.cn 8. Research of Virtual Prototype MDO Problem Modeling 虚拟样机多学科设计优化问题建模研究 www.ilib.cn 9. Collaborative Digital Missile Design Technology Based on Virtual Prototype 基于虚拟样机的导弹数字化协同设计技术 scholar.ilib.cn 10. Modern Design Method of NC Tool based Virtual Prototype Technology 基于虚拟样机技术的数控机床现代设计方法 ilib.cn 1. Development on Self-motion Advanced Hydraulic Support Based on the Virtual Prototype Technology 基于虚拟样机的自移式超前液压支架的开发 www.ilib.cn 2. Research on Analysis Model Based on Multibody System Virtual Prototype Implemented by Component 基于组件的多体系统虚拟原型的分析模型研究 service.ilib.cn 3. Numerical Simulation of Automatic Weapons Based on Virtual Prototype Technology 基于虚拟样机技术的自动武器数值仿真 www.ilib.cn 4. Missile maintenance training simulation system based on virtual prototype 基于虚拟样机的导弹维修训练仿真系统 www.ilib.cn 5. Simulation of wheelchair durability based on virtual prototype technology 基于虚拟样机技术的轮椅耐久性仿真分析 ilib.cn 6. Simulation of axial piston pump characteristic based on virtual prototype technology 基于虚拟样机技术的轴向柱塞泵特性仿真 ilib.cn 7. Analysis of Pile Driver Extractor Dynamic Characteristics Based on Virtual Prototype 基于虚拟样机的桩机动态特性分析 ilib.cn 8. Service Life Prediction of Friction Elements in Armament Based on Virtual Prototype Technology 基于虚拟样机技术的装备操纵摩擦元件寿命预测 168.160.184.82:8080 9. Modeling and Torsional Vibration Analysis of Engine Based on Virtual Prototype Technology 基于虚拟样机技术的发动机建模与扭振分析 www.ilib.cn 10. Dynamic simulation of mechanical systems based on virtual prototype technology 基于虚拟样机技术的锚杆钻机变角机构动力学仿真 www.ilib.cn 1. Application of Virtual Prototype Technology in the Development for Household Electric Appliances 虚拟样机技术在家电产品开发中的应用 www.ilib.cn 2. The Design and Implementation on IP Virtual Prototype IP虚拟原型的设计与实现 www.ilib.cn 3. Dynamic Properties Analysis of the Diaphragm Pump based on Virtual Prototype 基于虚拟样机的隔膜泵动态特性分析 ilib.cn 4. Study on industrial robot Virtual Prototype 工业机器人虚拟样机系统的研究 ilib.cn 5. Simulation of wheel crane virtual prototype 轮式起重机虚拟样机的仿真 service.ilib.cn 6. Investigation of Explosion-proof Cable-roller Based on Virtual Prototype Technology 基于虚拟样机技术的防爆电缆卷筒开发研究 www.ilib.cn 7. Improvement of Stable Steering Characteristic of Vehicle Based on Virtual Prototype 基于虚拟样机的汽车稳态转向特性改进研究 service.ilib.cn 8. Controlling System Simulation of Maglev Suspension Bogie Based on Virtual Prototype 基于虚拟样机的磁悬浮控制系统仿真 www.ilib.cn 9. Dynamics Simulation of Forced-Steering Mechanism Based on A Virtual Prototype 基于虚拟样机的摆式客车迫导向机构的仿真研究 www.ilib.cn 10. The study of design the roller coaster carriage by using virtual prototype technology 虚拟样机技术在原子滑车箱体设计中的应用研究 www.ilib.cn 1. The Design of tipper lifting mechanism based on virtual prototype technology and finite element method 基于虚拟样机与有限元技术的自卸车举升机构设计 www.ilib.cn 2. Research on Motion Simulation of Spherical Robot Based on Virtual Prototype Technology with ADAMS 基于虚拟样机技术的球形机器人运动仿真研究 www.ilib.cn 3. Research on Virtual Fatigue Test of Working Device of Construction Vehicle Based on Virtual Prototype 基于虚拟样机的工程机械工作装置虚拟疲劳试验研究 168.160.184.82:8080 4. Simulation Analysis System for MLRS Initial Disturbance Based on Virtual Prototype 基于虚拟样机的多管火箭起始扰动仿真系统 www.ilib.cn 5. Probe into Method of Safety Analysis for Recreation Facilities Based on Virtual Prototype Technology 基于虚拟样机技术的游乐设施安全分析方法探讨 www.ilib.cn 6. Research on Dynamic Characteristics of Hammer Mill's Rotor Based on Virtual Prototype Technology 基于虚拟样机的锤片式粉碎机转子动力学特性研究 ilib.cn 7. Modeling and Mode Analysis of Stator of Electrical Machine Based on Virtual Prototype Technology 电机定子虚拟样机建模与模态仿真研究 service.ilib.cn 8. Parameterized Analysis of Hydraulic Nog on Virtual Prototype 基于虚拟样机的液压支架参数化分析 www.ilib.cn 9. Research on Multi Agent Modeling of Individual Character Product Based on Virtual Prototype 基于虚拟样机的个性化产品多Agent建模研究 service.ilib.cn 10. The Development of the Virtual Prototype of a Multi -freedom Mechanism 多自由度机械臂系统的虚拟样机开发 service.ilib.cn |
随便看 |
|
英汉双解词典包含2704715条英汉词条,基本涵盖了全部常用单词的翻译及用法,是英语学习的有利工具。