tapered

A tapered, often bullet-nosed device fitted with a check valve and typically found at the bottom of a casing string.

At this point, I came to the realization that I had not tapered the osage thin enough.

The tapered plug or "needle" is screwed in or out of a mating orifice in the body and thus controls the effective orifice size.

Calls on it sounded fine, and its tapered build and light, 4. 57-ounce weight made it easy to hold and carry.

The limit load would be overestimated if only one element was used for a tapered member.

It has much more sharply tapered edges, and a new, optional, white color adds to the sense of lightness.

A steel tool with a cylindrical or tapered shank around which longitudinal teeth are ground, used for smoothing the bores of holes.

A tapered, often bullet-nosed piece of equipment often found on the bottom of a casing string.

If the historic tapered pins rise up in their holes and become loose, reseat them with a tap from your tuning hammer.

Conclusions can be drawn that the best scheme is to use side-pump with tapered fiber bundle and fiber grating as the reflector of laser.

When those hills tapered off the pilots curled right again toward the city center and made their final approach.

There are certain limits to which Cylinders may wear tapered or out of round before they require refinishing.

The lower part of the tank is a side tapered structure, and the top wall of the tank is provided with a repair hole with a sealing cover.

The metering rod either has two or more steps of different diameters or is tapered at its lower end .

Guideline values for the tightening angle a have been established, providing accurate positioning of the bearing on its tapered seating.

The lamp envelope is constructed having an upper curved face portion and a lower tapered portion which extends partly within the housing.

The compound eye of an insect like the housefly is effectively a bound of tapered fiber optical filaments.

Individual birds can grow up to three feet in length, with nearly half that length consisting of long, tapered tail feathers.

By controlling the taper end size of the fiber, the unique tapered fiber can convert a multi-mode beam into a single-mode one.

The system of claim 1 wherein the leading edge device arrangement has at least two tapered portions, including.

The shaft, (axle) of an automobile fits through the bore of a cone of the tapered roller bearing.

A toy having one end tapered to a point, allowing it to be spun, as by suddenly pulling a string wound around it.

The RPC Blackburn design is injection moulded with a compact base and a tapered neck for ease of pouring.

The results show that the proposed method can be reasonably applied to the plastic analysis of frames with tapered members.

Bearings with a tapered bore are always mounted with an interference fit .

RACEWAY : Also called a race; the tapered surface of either a cup or cone. The surface against which rollers revolve.

The opposite end is tapered to a small opening, threaded to accommodate the installation of a valve.

Try to put the tapered: a printed sheet of printer paper also has a very thin.

The set plug must be clean and calibrated to ensure it is not nicked, tapered, or out of tolerance.

A compact rectangular monopole antenna fed by a tapered coplanar waveguide(CPW) with a band-notch function is proposed.

This equipment is comprised of a jacketed cylinder with ellipsoidal head and tapered bottom, three-blade propeller, gear motor, etc.

The hole in the open side of the quill is tapered to enable mounting of lathe centers or other tools like twist drills or boring bars.

The tail flats feature swept-back tips forward of the swept-back and tapered fin with a blunt tip.

This invention designs a magnetic therapeutic apparatus composed of two tapered massage devices with different magnetic poles.

The utility model relates to a uterine catheter. A tightening-moderate and tractive tapered piston is sheathed on a catheter.

In this dissertation a new category of ultra- wideband (UWB) planar antennas with a unique tapered-slot feeding structure is presented.

Bevelled-face or tapered wheels used for grinding threads, gear teeth, and the like.

Combined with the characteristics of tapered fiber, the property of energy transfer in cladding are investigated in experiment.

Both the inner metal piece and the outer metal piece may include at least one tapered end.

As the tapered-section member extends increasingly , it's very necessary to find an exact method to consider its stability.

For bearings having a tapered bore , inner rings are always mounted with an interference fit .

As the bearing is driven up the tapered seating, its radial internal clearance is reduced .

Process of using blue dye to coat a surface of a master, gauge, or piece of product to check a flat, circular, or tapered surface.

the valve device is the needle valve, the front of needle is matched with tapered hole which is installed at both sides of guide groove.

A fastener with a tapered threaded shank and a slotted head .

The military style had no pleats and was tapered at the leg bottom to conserve fabric.

They come in an array of shapes, including spiky stilettos, tapered cones, sloping wedges and thick wooden posts.

The taper gauges can b3e used to meet the Interchange of tapered parts In machIne Industry and achieve taper transfer and calibration.

The designation suffixes used to identify certain features of SKF single row tapered roller bearings are explained in the following.

It allows large spherical roller and CARB bearings on tapered seatings to be mounted quickly and precisely.

The limit point of view of individual powder drop tube can be tapered lower part of the expansion pipe solution to.

Nau also has a slim tapered jean made from unworn, un-distressed organic cotton, with a tapered leg cut and dyed a dark shade.

The M-shaped jet plate, the tapered end plates and the column plate are formed into a cover.

The gain and saturation of tapered laser amplifier are the function of temperature and injection current.

In 2000, she says, around the time she discovered the mind-control forums, the voices stopped and the surveillance tapered off.

These open pitched helical mechanical components could be cylindrical, conical, tapered, concave or convex is shape.

The tapered I-section Beam-Columns with Slender Web is widely used in portal frame structure for its rational force form.

One end of a pencil is tapered off to a point.

A threaded neck ring is attached to the tapered end to allow a protective cylinder cap to be installed.

His wrists are narrow and his fingers tapered and deft, like those of a pianist or a surgeon.

Where tapered roller bearings are concerned , this interchangeability also extends to the outer rings and inner ring assemblies .

The miniature motor and the tapered sharpener body are connected through a big and a small gears.

The tail flats are high-mounted, swept-back with a swept-back and tapered fin.

Application, construction and principle of a hydrogen sensor based on surface plasmon resonance using tapered fiber are studied.

This paper gives researches and analyses on the tapered members which are widely used in gable portal frame.

According to the product should be regulated properly controlled General coated paper, uncoated paper appropriate tapered thickness control.

When condition has improved the dosage is reduced under continuous observation, to the lowest possible level or tapered off completely.

It indicates that the effect of the tapered angle cannot be ignored in the study of pulsating flow.

The packer is particularly designed for non-round containers and reverse tapered, locking shape, trigger and unstable bottles and flasks.

The roller is tapered, has a somewhat spherical shape and when assembled fits against the large rib of the cone.

Where the beams have been tapered, each swipe of the plane is continuous.

Even if scrappage schemes are continued or tapered , there may not be many buyers left who meet the qualifications.

Unlike the other two, it isn't tapered at the edges, and my test unit sported an orange color, though it also comes in gray.

It is experimentally demonstrated that tapered fiber liquid sensors have high sensitivity, reliability and immunity from interferes.

A hefty Hutt, Jabba resembled a worm-like slug, with a legless, tapered body coated in slime.

A tapered beam element model is used to simulate the behaviour of a masonry arch bridge with loading.

on the contrary, tapered temperature when compared with other business card printing and membership card making holdout to thick.

The testing results of static piling equal section pile or tapered pile with different side obliquity are also compared and analyzed.

NAEP test score gaps in math and reading between Caucasian and minority students have tapered to the smallest margins in three decades.

It consists of a vertical, tapered glass tube containing a movable weight.

Another difficulty, which occurs in predicting the stress in bevel-gear teeth, is the fact the teeth are tapered.

This enables the zip to run freely without catching the tapered ends when closing the zip puller.

Fund raising tapered off through the course of the year and fees , too, are coming off .

The centre disc is sometimes tapered from the centre towards the gate to save material and to reduce the bulk for cooling reasons.

One kind of new die less drawing method for tapered wire-pole with square cross-section is introduced in this paper.

Double row tapered roller bearings can accommodate simultaneously radial load and also axial load in double directions.

The catheter and the tapered piston are made of rubbery material.

The tapered plug is precision ground from hardened high alloy material or an overlaid stainless to assure a tight seal and easy operation.

The housing is ergonomic with a tapered design and curved back to fit nicely in your hand.

The flow field in tapered jacket-type flow distributor in heat exchanger is simulated with computational fluid dynamics(CFD).

The carpenter tapered the end of the fence post with an axe.

This article introduced the structure design and the computation of nose flow with tapered clothes rack type for developing the product.

The carpenter tapered the end of the fence post with an ax.

The shape of the section of each medicine liquor barrel is tapered.

Tapered roller bearings have tapered inner and outer ring raceways between which tapered rollers are arranged.

The straight keys fit snugly on the sides of the keyways only, the tapered keys on all sides.

SKF produces double row tapered roller bearings of the TDI configuration mainly in the designs described in the following .

For tapered H-section members, thin and high webs are adopted, and the design fully develops flange bearing capacity and save materials.

A tube is a pipe tapered at both ends. Each end is threaded to allow the installation of valves, connections, or relief devices.

This thesis researches the fuse-tapered polarization-maintaining optic fiber coupler.

Like birds, airplanes have tapered bodies with wings. Unlike birds, planes have engines that allow them to lift off and remain in flight.

Special tapered shape, makes sure that fillings can open easily or properly shrink to suiting different caliber.

A new government has since restored some of Honduras's international ties, and the flights have tapered off.

The march tapered off after about an hour, with most of the protesters apparently dispersing.

passenger cars . windscreen wiper systems . tapered , knurled shaft ends and arm - holes.

While its tapered opening flexes for instant Kodak moment capturing without risk of unintended fallout.

US personal income fell slightly more than expected in June as payments from the US economic stimulus tapered off.

In front of them, the mountains tapered into hills for several miles before the rocky soil surrendered to the trs of a dense forest.

Both of these keys may either be straight or tapered in depth.

All fittings, unions, etc. shall normally be with tapered threads (NPT) unless otherwise required.

SKF single row metric tapered roller bearings are manufactured to Normal tolerances as standard .

TAPERED ROLLER BEARINGS. FLANGED CUPS. BOUNDARY DIMENSIONS.

Many portal frames are designed with tapered section so as to adapt to the change of the bending moment and save the steel.

A tapered back gives the sofa comfort, while the deep armrest conceals storage in a hinged panel that pulls down to reveal two pockets.

The projection lines of all the tapered surfaces meet at a common point on the bearing axis.

widely distributed fast-moving ten-armed cephalopod mollusk having a long tapered body with triangular tail fins.

A few relatively wide bearings have inner rings with a tapered bore of 1: 30.

The tapered slot antenna fed by inclined microstrip-slot line transition was introduced.

Tapered bearing seatings are checked using ring gauges , special taper gauges or sine bars .

TAPERED ROLLER BEARINGS, DIMENSION PLAN AND ISO CLASSIFICATION OF SERIES.

The following objects to cylindrical, tapered as an example to illustrate the method screen printing surface.

It is the world's largest manufacturer of tapered roller bearings and seamless mechanical steel tubing. Headquartered in Canton, Ohio, U.

This thesis is mainly focused on the tapered fibers and supercontinuum generation.

The muffler is an irregular shaped tapered type mid-ship muffler.

Specifies dimensions and gauging of tapered pipe threads on plastic pipe and fittings.

An elegant pear-shaped diamond is gracefully embraced by tapered baguette side stones.

SKF single row inch tapered roller bearings are produced to Normal tolerances as standard.

Countershaft assembly uses tapered bearings to reduce end play and extend gear life .

The jogging bottom has endured a taxing evolution. First, we wore them tapered for aerobics.

The tapered ends of both the inner metal piece and the outer metal piece each may include a double taper.

When thrust must be accepted, the tapered roller bearing of the type sketched in Fig. 9. 3(b) is employed.

Tapered jeans, dress shoes, colored button-downs, women in elegant sun dresses.

The profile may be formed by including tapered sidewalls.

Icicles are formed when water dripping from an object freezes, forming long, tapered spikes.

Two centuries of Viking raids into Europe tapered off following the adoption of Christianity by King Olav Tryggvason in 994.

Expectations of renminbi appreciation , according to the futures market, have tapered off in recent days .

Using the combined deformation analysis method, the author mache an analysis of tapered bit forced in operating.

It's certainly thicker feeling, but they rocked it Treo-style and really tapered those edges, so it just doesn't feel that different.

Aimed to tapered beam units, the finite element method (FEM) is introduced in this paper.

They can be straight or bent or tapered to desired shapes to meet space requirements with maximum light transmission.

half by a plane passing through its bulbous front and tapered tail.

stigmas capitate. Achenes slightly exceeding persistent perianth, black-brown, shiny, ellipsoid, trigonous, 4-5 mm, tapered at both ends.

The number of tourists in the beach area tapered off after the peak season.

Small bearings may be driven up onto a tapered seating using a nut.

The outsides of the slips are tapered to match the taper of the rotary table.

All vasopressor infusions were titrated and tapered according to protocols to maintain a target blood pressure.

A tapered tuck sewn to adjust the fit of a garment.

It will most likely be in a 1. 5-milliliter tapered plastic centrifuge tube "smaller than my little finger. "

The tapered design reduces installation time, making alignment faster and more accurate.

Spindle is supported by precision tapered bearing.

The new painting process for tapered leaf spring is introduced and some suggestion is given to further studies.

METAL PACKAGING. FLAT OR TAPERED TOP CANS WITH HOLES FOR PLASTIC SPOUTS.

He has tapered down his smoking from two to one package of cigarettes a day.

The legs curve inward until they unite in a single tapered tower.

A flat (rather than tapered) edge gives them a shape that increases lift.

Chopsticks are two long, thin, usually tapered, pieces of wood.

The screw fixing hole and the screw adjusting holes are tapered counter bores.

Concealer - F70- The rounded, tapered, flat shape makes this brush ideal to conceal the under eye area.

The Bicon implant is a tapered implant design with fins or plateaus.

Tubes shall be provided with tapered ends, tapered-cut angle 45 degrees.

Meanwhile, steer clear of tapered leg openings or a wide bell-bottomed look.

Also, that hole has a tapered surface to allow mounting a plain lathe center.

A single-row Tapered roller bearing can support a combined radial and axial load.

He tapered the stick with a knife.

T-handle on the Scienceware Tapered Plug Sampler applies rotating force to cut sample.

However, some bearings with a tapered bore 1: 12 can be supplied (fig 18).

Capsule ovoid, tapered, slightly oblique, ca. 1 cm, with sparse short scaly hairs.

The inner rings have cylindrical or tapered bores.

Out came a battalion of tapered trouser suits, and the hair got shorter.

Spindle tapered bore no bruising, grind.

A tapered steel pin for enlarging and aligning holes.

The diamonds are Tapered Baguettes and Round Brilliant cut , SI2 clarity, G - H color and weighs . 20 Carat Total Weight.

Bearing with tapered bore, taper 1: 12, intermediate ring between the outer rings and pressed steel cages (fig 14).

She favors tops that are tapered but not revealing, flats, lip gloss.

The dog's tail tapered off to a point.

The chemical milling process forms a tapered portion (18) of the endodontic file (10).

The reason is that a quietly tapered phrase ending is achieved by lifting the weight of the arm rather than by lowering it into the keys.

It is very difficult to grind tapered bore in a large diameter gear without dedicated equipment.

Medium Angled Shading - E70- Angled, tapered, flat top.

Based on the experiment, the relationship of ring parameters and vibration of 32210 tapered roller bearing is studied.

Subscriber growth rates have tapered off, and Americans tend to buy new phones less frequently than consumers in Asia.

Each knuckle has 2 tapered bearings for smooth, care free operation.

Tapered distal stem geometries are inherently less stiff than cylindrical ones ( see Fig. 7-24 ).

Overtures from the VCs have since tapered off.

Outer Scale (Fig. 6) - This scale is a micrometer-type scale marked 0-9 at the tapered base of the red handwheel.

Tapered Blending - E40- Rounded and tapered top.

To create a line that is tapered at both ends like the one shown below.

Very large, thin wall tapered tubes.

"It then tapered off and we've seen it rise again with the cold weather , " he says .

Those people cleared out when the rains tapered off about 70, 000 years ago, but then the rains returned and people moved in again.

The boy tapered both ends of the pencil.

Tapered roller bearings generally fit in the dimensional plans according to DIN ISO 355.

The tubes are tapered on both ends.

The through holes (11) are tapered so as to accommodate the fixing means (25) in varying orientations.

Their round tapered tail is about 12 inches long.

segments (3-)5-9, elliptic or oblong, tapered at both ends, densely pubescent, apex mucronate.

Capsule conical-tapered at apex, 10--15 mm, much longer than sepals.

It is applicable for all the male tapered threads such as NPT, BSPT etc.

A movable rail , tapered at the end, such as that used in a railroad switch .

Fishy web server requests tapered off greatly, and while there are still a few every day, it's now become a manageable problem.

GIB : A machine part, usually tapered, that is used on slides for adjustment purposes.

Experimental and theoretical investigation to ultimate load-carrying capacity of a steel portal frame with tapered members

Study on Transmission Mode Characteristics of Optimum Design of a Planar Array of Tapered Waveguides in Wavelength Multiplexer

Primary experimental study of resonator Cerenkov oscillator-tapered amplifier tube operated at low magnetic field

Pressed Die Design for Outer Ring Hardening of Large Size Tapered Roller Bearing Made of Carbonization Steel

Design for hardening press die of outer races of double row tapered roller bearing made of carburizing steel

A clinical study of enhanced continent mechanism of tapered ileum by extramural support from pouch-abdominal wall

Mounting - Mounting bearings with a tapered bore - Measuring the clearance reduction

The cages used for SKF double row tapered roller bearings are either

CARB bearings with a tapered bore can be mounted on smooth or stepped shafts using

Position Determination of Maximum Lateral Flexure for a Tapered Beam by Local Finite Difference Method

Analysis on the Effective Length of Tapered Columns in Single-Span Portal Frames

The discussion on calculation of reinforcing bars in varied cross section by the element stiff matrix of the tapered member

The Design of the long tapered hole tool with small aperture and big depth

Study of Micro Dimensional Behavior of Mill and Analysis of Longevity of Four Row Tapered Roller Bearing

Determination of Diameter of Grinding Wheel Used in Flange Grinding of Thrust Tapered Roller Bearings

Urodynamic study of enhanced continent mechanism using tapered ileum as continent urinary reservoir

Preparation and characterization of functional butadiene styrene tapered block copolymer resins

Bearing, Auto bearings, needle roller bearings, deep groove ball bearings, tapered roller bearings, thrust ball bearings and EMQ Bearings

Arabian heads are short, refined, and dished, with a tapered muzzle; large nostrils;

Fruit elongate, oblong, slightly dorsally compressed, apex abruptly tapered, base rounded, glabrous;

Intelligent Measuring System for End Face Run -out of Tapered Roller Bearing

Mathematical model of flow field around tapered windscreen fan and its analytical solution

Rolling bearings; Metric tapered roller bearings; Boundary dimensions and series designations

Characteristics and construction technology of telescopic steel conduit with tapered adapter

The Effects of Tapered Angle on the Pressure Distribution in an Unsteady Arterial Blood Flow

the vertical circular cylinder (4) is connected with a tangent of the horizontal tapered pipe;

Study on performance of light wave propagation in tapered polymer optical fiber connector

Experimental Observation on the Coupling Characteristics of Tapered and Lensed Fiber and Planar Lightwave Circuit Chip

The Air Hydraulic Pressure Cutter Bucking - out System of Boring a Tapered Pinhole in a Piston

Study on Relationship between Coupling Coefficients and Propagation Constants for Multi-tapered Fibers

Round-tapered lime-soil column and design calculation of its composite foundation

Spherical roller bearings with extended inner rings, spherical roller bearings with tapered bore and extended inner rings

Determination of Presetting Parameters for Tapered Roller Bearing of Automobile Main Decelerator

Design of a Tapered Lens for Semiconductor Laser to Single-Mode Fiber Coupling

Study on the Radial Vibration and Equivalent Circuit of Thin Elastic Annular Plate with Tapered Thickness Along Radial Direction

Shaft and Housing Fits for Metric Radial Ball and Roller Bearings (Except Tapered Roller Bearings) Conforming to Basic Boundary Plan

Improvement on Design of Curvature Radius of Sphere Surface on Big Rib for Tapered Roller Bearings or Spherical Thrust Roller Bearings

Geometrically nonlinear performance of portal frame structures with tapered members

Influence of introducing chirp on bistable characteristics of linear negative tapered Bragg gratings

Numerical Simulation of Flow Distribution of Polymer Melt in a Linearly Tapered Coat-hanger Die

Four Row Tapered Roller Bearing with Single Face Seal Used in Medium Thick Plate Mill Machine

The Analysis of Deflection and Stress of a Rotating Twisted and Tapered Beam

Research and application of ternary element composite foundation of gravel pile and tapered pile in soft roadbed treatment

Mode Transmission Properties of Tapered Fiber and Optimal Fabrication Position of Fiber Microlenses

An Equivalent Omnidirectional Antenna Constructed with Tapered Slot Antennas

Tapered roller bearing with special frictional behaviour and heightened running accuracy

Development of MATLAB-based Computing Program Used in Measuring Ball Method to Detect Reverse Tapered Teeth

Enhanced continent mechanism of the tapered ileum in continent urinary reservoir

Analysis to Fields Synergy for the Affinity Chromatography in a Tapered Bed