torques

Knowing the state of the rotational motion of a system, determine the external forces or external torques acting on the system.

The results of calculation indicate that the blade frictional torques have a magnitude equal to that of the driving torques.

In order for a gyrocompass to be accurate it is obviously necessary to hold spurious vertical torques to an extremely low level.

By means of numeric calculation, the dynamic response of gear lapping system is obtained under different retarding torques.

A large part of the test effort, if not the greatest part, now is directed toward calibration of bias torques.

Aimed at a uniform distribution of driving torques, an optimization design of pass parameters is carried out for primary bar rolling mills.

But some caution is needed in choosing the center of rotation to be employed in evaluating the torques and calculating the motion.

Though an overall check of the allowable torques of various universal couplings, the corresponding safety coefficients are worked out.

For material to fall inward, the angular momentum must be transferred away by galactic-scale torques. Bars and spirals can do just that.

A speed reducer is elastically connected with an engine base through an elastic combiner to deliver torques.

The effects of interfering torques are discussed from the aspect of two-order weakly damped control systems.

Kinematics is the study of motion in mechanism, while the analysis of force and torques in machined is called dynamics.

Inputs of the spherical robot consist of two perpendicular torques.

output is. divided, part going directly to the tilt-axis. torques and another portion feeding the torques via a thermal integrator.

Angular momentum, torque, cancellation of internal torques, equations of statics.

Under certain conditions, hydrodynamic torque Can meet or exceed seating and unseating torques.

Make relevant calculations for torques, deflections, stresses, etc.

Recommended tightening torques for the cap bolts are provided with the product data.

The research then focuses on the mechanism which a pivot can resist external torques at arbitrary position.

You can also change positions of the torques. In the dialog box preview, drag the torque arrows to the shaft sections as shown on the image.

System introduces a variety of friction factors on the bearing friction torques.

During the past four lectures, we have dealt with angular momentum, torques and rolling objects and rotations.

CYLINDRICAL SHAFT ENDS. LONG AND SHORT SERIES. TRANSMISSIBLE TORQUES.

The Tornado is designed to assess the release and engagement torques of packaging screw closures.

I want you to appreciate the situation of static equilibrium that the sum of all forces 0 and the sum of all torques have to be zero.

the two torques ensure the close contact of the soleplate and the soleplate stand.

The results show that the surplus of torques is uniform and the minimum one has a significant increase.

This is a quick change chuck provided with a tap protection device for pre-adjustable torques and suitableon drilling machines, lathes etc.

The torques are recorded with a torque sensor.

In this paper, we analysis the low-frequency phenomena from the viewpoint of damping torques.

Axial Angular Momentum: Vertical Fluxes and Response to Torques.

The torques are transmitted to the frame by tension and compression forces in the rods.

In manual designs, the driver shifts the gears to deliver different torques.

External torques arise from outside the system.

Torques resulting from this change are called compliance torques.

Validation of Quasigeostrophic Zonal Mean Flow Responses to Torques.

But now we need that 0 the sum of all torques have to be zero.

There will be stray torques from the leads to the detector and some frictional forces from the bearings.

We will encounter cross products when we deal with torques and when we deal with angular momentum which is not the easiest part of 801.

0 pressures, torques, pull dint, abnormal shape etc. precise spring coil.

Tests were performed for no axial load and for axial loads of 700 N with and without external torques of 1 and 5 Nm on the ankle.

It is shown that the rotor hub viscous frictional torques have a larger magnitude than the other retarding torques.

But what is also required, that the sum of all torques relative to 0 any point that you choose is also zero.

The second shrink fit (9) allows greater torques to be transmitted from the gear (4) to the shaft (2) than the first shrink fit (8).

In addition to these are armor, helmets, belts, gauntlets , torques, and rings.

Comparison between the methods about calculating internal torques and external torques in a planetary transmission

Preliminary study of forces and torques exerted by internal solitons on small-diameter cylindrical piles

Angular Momentum - Torques - Conservation of Angular Momentum - Spinning Neutron Stars - Stellar Collapse

Aerospace series - Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads

Calculation of Electromagnetic Torques and Error Analysis of a Wheel PM Motor

An Experimental Study on the Counter-magnetostrictive Effect of Ferromagnetic Material under Different Applied Torques

Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads

Railway vehicles; securing of bolted joints; initial stressing forces and tightening torques

Aerospace - Testing of locking torques for nuts and related threaded parts, with metric screw thread - Test methods

Why Western Boundary Currents in Realistic Oceans are Inviscid: A Link between Form Stress and Bottom Pressure Torques

box wrenches , double end , modified offset , with unequal openings ; test torques series a

Analysis of Harmonic Electromagnetic Torques of Hybrid Stepping Motors

box wrenches , double head , deep offset , with unequal openings ; test torques series a

Shipbuilding; Inland vessels; Steering gear; Values of torques

Analysis and Calculation of Harmonic Torques for Induction Motor Fed Inverter

Resolution dependence of orographic torques

Engineers wrenches, double head, open end, with unequal jaw widths; test torques series D

Engineers wrenches, double head, open end, with unequal jaw widths; test torques series C

box wrenches , double head , with unequal openings ; test torques series b

Chaotic Motion of Redundant Robot with Minimal Joint Torques Planning

The analysis for torques by wind load in the symmetrical and antisymmetrical tower

Double-end flat flare nut wrenches with unequal openings; test torques series C

Measurement of remnant magnetic torques

Experimental Study on Tapping Torques with TiN Coated Taps

Tee handled socket wrenches; double end; test torques series A

Single-head engineers wrenches; test torques series C

Single-head engineers jaw wrenches; test torques series D

Winter time flow over and around Greenland: trajectories related to torques

Extra low operating and seating torques ensured by

box wrenches , single end ; test torques series a

Analysis of harmonic torques in surface permanent magnet BLDCM

Four-way socket wrenches; test torques series A

Tightening torques for the nuts