the font

The FontCollection allows you to get a list of the font families contained in the collection with its Families property.

So, after the baptism, lurking maliciously at the font, I found myself squaring up to one of the godmothers with disapproval in my eye.

Depending on the typeface used, the sequence f and i is often replaced with a single fi glyph, depending on the font chosen.

The font used to clean, easy to recognize, strange interrupting my eloquent writing or the font if long into the adverse instead, readers.

But that depends on the font and whether the font is proportional and other things that aren't so easy to calculate.

In real-life typography , the point size of a font is not so precisely related to the actual size of the font characters.

Therefore, with this structure, an X server may be configured to manage fonts by itself or to use fonts from the font server, or both.

There are also the name of the food label to the font size of all sizes, it's easy to confuse the consumer.

Note that the length of the first line depends on a number of factors, including the width of the page, the font size, etc.

This means that the starting point, the 'e', already defined that the rest of the font cannot be a sans serif typeface.

Each membership card before there was an error on the designer of the producers ' comments about most is the font.

The designer of the font might make the actual characters a bit larger or smaller than the point size would indicate.

If international characters appear incorrectly on a Web page, try changing the font used for the respective language.

If the user wanted to see a font at another size, the Font Manager found the closest match and applied a basic scaling algorithm.

The other printer driver may measure the font wider and the length of the text may grow resulting in truncated text on your report.

By means of the speculation on the sounds and meanings of the characters, the font style of Ba and Shu characters can be analyzed.

He rode around in the font, with a long blood-shake sword in hand, shouting out his cheerful vows.

That represents the font to apply to the current text selection or to text entered after the insertion point.

These glyphs can be stored in any order in the font file, and is typically accessed through a simple glyph index.

Changes the font style and size for the text that appears in statement completion pop-up in the editor.

Specifies the character set of the font specified by a visual style for a particular element.

As shown in Listing 4, at the top of our base stylesheet (base. css) we defined the styles, including the font size.

The font color for magic items in hireling inventories should be a bit easier to read.

When you add multiple charts to a workbook with this setting enabled, the font limitation for a workbook may be reached.

Returns the font object used for standard interface items that are rendered in boldface type in the specified size.

Returns the font object used for standard interface items that are rendered in italic type in the specified size.

If the font that you want exists on the report server but not on the local computer, you can type the name of the font.

The text field used in the search form at the top of the page increases in width as the font size is increased.

This information is known as the metrics of the font, and is stored with each font.

The font size of the h1 element is smaller (actually, I hit upon the size I wanted through a little trial and error).

You can see that the background color of the form and the font style of the text fields are applied as we defined them in the custom theme.

While he explained that it's difficult to know why the Digg widget works better, he speculates it may be the sizing of the font used.

The next time the component is rendered (typically on next screen refresh), you can apply the font changes then.

Notice that the font colour of this expression and value turns red to alert you that it has changed.

Provides a list of choices for the font to be used for text displayed in this style.

Class allows applications to install a private version of an existing font without the need to replace the system version of the font.

The font can be easily stenciled and is appropriate for different uses (street art, retail, independent shops, street markets).

I would like the font style to be consistent across all platforms.

This causes them to jump to something like the font on the bottom because it feels more unique and interesting.

The font and color attributes of the p element are used to set the font, font size and color of the text respectively.

It has been suggested that this is because the small size of the font causes serif fonts to appear excessively cluttered on the screen.

Attributes are relative to individual fonts, the amount of boldness varies according to the font to which it is being applied.

The characters printed on the seals shall be the simplified characters promulgated by the State Council with the font of Song typeface.

In Notepad, replace the font name with the name of another font on your system.

Common style settings include font properties and a foreground color for the font used by the PathSeparator property.

Returns the font object used for standard interface items in the specified size.

At runtime, the default system font of the user's machine was used to initialize the Font property of the Form class.

The font size is a little smaller than recommended for body text, but this isn't supposed to be body text.

Duplicate the text layer and hide the original one. Change the font and size of the duplicate text layer. Try to use a bold font.

Embedded technology guarantees that the font is not installed on the computer to the original format use the original font for printing.

This class is commonly used in a property for a class that requires font information, such as the Font property of the WebControl class.

The font does not match between the article title and summary; and the spacing is too large between the title and summary.

Be aware that you will reduce the usability of a diagram if you need to reduce the font too much or crowd the symbols and lines.

You can use this method to determine the size a form would autoscale to for a specific font before applying the font to the form.

The font includes upper and lowercase alphabets, numbers, punctuation, accented characters, symbols, and miscellaneous characters.

You have control over the font, color, and alignment of the text in a text view, but only as they apply to the entirety of the text.

Gets or sets a value indicating whether the form adjusts its size to fit the height of the font used on the form and scales its controls .

It sets the font to a 24-point bold monospaced font by default, and a 48-point italic serif font when the mouse moves over the button.

You can put names as many as you can to fill in any vacancy as the font size is small.

The font you choose is an important aspect of your document's readability, and it also affects its style and entertainment value.

Gets or sets a value indicating whether the height of the control automatically adjusts when the font assigned to the control is changed.

In the Font box, click Wingdings, and then scroll to the bottom of the list.

This module implements a font list and combo box that you can use as a substitute for the font dialog box.

The geometric use of the letter H and the font that accompanies it with the dark black background.

The typeface field of the FONT option in the DIALOG statement must be an ASCII character string enclosed in double quotation marks.

The font mapper transforms the value into device units and matches its absolute value against the character height of the available fonts.

Specifies that appearance of the font does not matter.

The font, font style (normal, italic, oblique), and font size can be controlled in the generated table of contents and on the page footers.

Under Apply a font scheme, choose the font scheme that you use for your business.

Use the Font page to select the desired font type, its base attributes (Italic, Bold, etc. ) as well as the size.

The name of the font used to display text.

This results in the font setting being written out to the resource files, where localizers can edit it.

Getting the font and ID card working can be tricky on some systems, but the source in the script archive calls out the problem areas.

If you don't select the text in the Caption and Description boxes before changing the font, the settings you specify will not be applied.

Lets the user specify the font used for the text on the control.

Different fonts include different special characters. If you do not find a particular special character, try changing the Font selection.

The size (in points) to which the font is scaled. This value must be greater than 0. 0.

The teleprompter letters can be made larger, Nelson offered. But with the font-size maximized, Kidman still struggled.

You can choose to print text in a different font face and size than the font face and size that you use when editing in the Code Editor.

This guarantees that the system calls the Dispose method on the font when your code exits the block.

Provides basic information about the font specified by a visual style for a particular element.

Along with this I would like to be able to change background Item and color. And to be able to change the font and color.

This listing says the font size differences having the same em values are due to the hierarchical layout of different child selectors.

Changes the font size for window title bars, menus, and other features. This option does not increase the size of text inside windows.

In previous ages, the man of ideas, the priest or the philosopher was regarded as the font of wisdom.

Thus, taking advantage of the font selected by the user is as easy as reading a property.

Note how the font used is too bold to be clear to read.

Click the arrow next to the Font box, and then move the pointer over the fonts that you want to preview.

You can install and use the font properties shell extension to check the embedding properties of your fonts.

The font, color, and size of the annotation text can be customized for more visibility.

Gets or sets a value indicating whether the font specifies a horizontal line through the characters.

The first tab page uses the four components to open a file, save a file, and set the font and color of the text.

If the version information does not provide resolution, the font with latest timestamp is returned.

The font design is an important part of modern visual communication and transmission design system.

This dialog lets you merge outlines of font symbols in the currently open SWF files before saving the font as a TTF (True Type Font) file.

Among the font image processing, programming can be pictures according to their own needs editing interface fonts.

Is there another earth in the universe? so many questions that we can not answer, In the font of universe, we seem to be so small.

Reference to the Material containing the characters to be drawn. If set, this property overrides the one in the Font asset.

Select the font name, size, weight and text color you want on your label, and click Next.

For all height comparisons, the font mapper looks for the largest font that does not exceed the requested size.

Indicates whether the font color attribute can be sent to the output stream.

In the Set the font used in the terminal window section, click on Change. . . and use the font dialog to select a readable font.

If you add charts manually or if you copy and paste existing charts, you can reach the font limitation for a workbook.

Computing the bounding metrics requires the complete set of metrics for the font.

Indicates whether the font name attribute can be sent to the output stream.

If you are straining to read what's on your screen, use the magical keys 'Ctrl and ' to increase the font on your web pages.

The fully specified name of the font. This name incorporates both the font family name and the specific style information for the font.

When macular degeneration recently made reading difficult, he learned to enlarge the font on what he calls his Gimble.

Allows you to set the font and color of text in the grid.

Allows you to set the font and color of text in the list.

Will the font size smaller, decipher presentation, the user visible increase the resolution to your situation.

You can create an XML file that specifies the font matrix file location. The format we chose is shown in Listing 3.

Returns the size and location of the specified string when drawn with the font of the current visual style element.

If Asian Typography has been enabled, the Font page looks like the figure below.

The font mapper transforms the value into device units and matches it against the cell height of the available fonts.

Gets or sets the character to be substituted for characters not in the font.

The CSS font properties allow you to change the font family, boldness, size, and the style of a text.

Notably, the font, indentations, colors, and auto-completion can be configured.

The second argument specifies the size of the font measured in units identified by the fourth argument.

The key for retrieving the style from the embedded style sheet for the Size property of the Font property.

They first read in the resource file the name and size of the font to be used (lines 64 through 70).

Use the Font setting to set the font, typeface and size for a field.

Changes here usually only affect the font colors of your [[navigation]].

Font size setting preference for List View - In the Preferences screen, you adjust the font size of the list view text.

The font used for the column headers.

We conclude that it seems to work best to use headlines with the font size between 17 and 25px.

The font used for the message displayed while the report is being executed.

Select sans serif as the font family and small as the font size for the unselected font from the drop down lists.

On many pricing tables, the font size of prices, titles and important headlines are larger and stronger to make them stand out .

Gets or sets the font used for the control.

The template sets the font for the line of text (and, therefore, the height of the line) using the element's height attribute.

To load the font matrix file, load userconfig. xml using the Struts plug-in and Java code as shown in Listing 5.

Modify the appearance of the font or the background color in dialog boxes and tool windows.

Creates a size object and uses it, the font object, and the maximum string width to measure the size of the string.

To choose the size of the font, click the arrow next to the Font Size box on the Formatting toolbar.

e. Click CC Project Settings to change the font, size, color, background, and the number of lines in which the captions must be displayed.

You can custom the font type and size for the PDF file creation, set the PDF file page layout and margin values, and much more.

Update the appearance of the font by calling the UpdateBoldedDates method.

you are saying that the left magin of paragraphs should be 1. 5 times the height of the font of that paragraph.

Gets or sets the font used for column headers.

In the Formatting toolbar, the two rectangular areas on the left are the Font Name and Font Size menus.

Specifies the font to use for line numbers when printing. This will only take effect if the "Print Line Numbers" option is non-zero.

Documents containing the font may be opened for reading, editing is permitted, and changes may be saved.

The color is inherited from the external style sheet and the text-alignment and the font-size is replaced by the internal style sheet.

The name of the font to use for the text in the item.

The font to be used to display the VALUE or FORMATTED_VALUE property.

The font scheme for the entire publication is converted to fonts that are appropriate for Web viewing.

A string up to 32 characters in length that represents the font name.

The test example above tests the font (Georgia vs. Verdana) of a block of body copy.

The specified font is not supported or the font file cannot be found.

Gets the font smoothing contrast value used in ClearType smoothing.

In the Properties dialog, you can set preferences for the design page, including setting the record background color and the font.

You can define styles for anything from the font of a page to the bordering of a table.

Sure, it's broken down into bullet points, but the font is small and there are hardly any images to differentiate between the items.

Adding a theme gives your web site a new look by changing the font, style of bullets , and color or design of the background.

Specifies whether to strike out the font, and specifies the available colors for the font.

Note: The font preference entry is peculiar. It does not take affect immediately.

FreeType tries to emulate a Unicode charmap if the font doesn't contain such a charmap, based on glyph names.

The types of symbols and characters that you can insert depend on the font that you choose.

When the zoom view of the form was changed, the vector of fonts was fetched and the appropriate zoom factor was applied to the font sizes.

format fonts to set the font , size , color , and formatting for the text in your slides .

The final step is to tell your report to use the font.

It also assumes that in the body selector, the value of the font size property is set to 1em.

Add what ever text you feel like with the font of your own choice.

The font size of the data in a cell can automatically adjust to fit in a cell.

Specifies the font to use for a document's body when printing documents.

Through the font design in packaging method, the culture connotation of product brand will be upgraded.

At this point, you have only two solutions: Searching for the font during hours, or using the What the font service.

On the Formatting toolbar , choose the font type , font size, and font color you want .

Listing 9 is a simple CSS stylesheet that changes the font for the labels and aligns the form fields more neatly.

Values that specifies the character set of the font.

For font, goto tools - graphic reports - options - click the command button FONT at bottom left, then select the font.

For more info and optimization when writing non-ASCII characters, check the character option in the font properties.

The font mapper uses a default height value when it searches for a match.

You can modify the font size used to display topics in the document window.

For subscript text, if you want to lower the selected text without changing the font size, enter a lower percentage in the Offset box.

To set the font and font size, click Font, and then make your changes in the font and size boxes.

To choose a font color, click the arrow next to the Font Color icon to display a color palette. Click on the required color.

Describes how the font and color choices in the Editor may affect printing.

The font helps convey the unique geometric style, in a clear and consistent manner.

The key for retrieving the style from the embedded style sheet for setting the Bold property of the Font.

Next, I apply the result to the font-size property in the p selector, as shown in Listing 8.

The font for the specified device context is not a TrueType font.

If you don't see the character that you want, try clicking another font in the Font list.

You can customize the look and feel of the template by changing the font, formatting, or layout of the form.

The maximum number of characters displayed in each cell is dependent on the font size.

Windows starts an automatic installation of the font Unicode Arial MS TrueType.

The font has wide character support and is available for free and commercial use.

If the font itself is in bold type, this ratio should be smaller.

Gets the font properties associated with the advertisement banner control.

On the Symbols tab, in the Font box, click the font that you want.

Alters the algorithm that the font mapper uses when it maps logical fonts to physical fonts.

Specifies whether to underline the font, and specifies the available colors for the font.

If the font is bold, its proportions should also be smaller.

Now navigate to a page and press the bookmarklet to initiate the font change.

When you leave the font dialog, the new font is previewed in the line below and only applied when you click the Apply button below.

Measures the size of the string, using the string, the font object, the maximum layout size, and the string format.

From the Font Name and Font Size menus, you can change the font and its size in selected cells.

Check that the font size and style of the book is suitable for young eyes.

The font has got both the italics and bold versions recently so there are probably only bugs to be fixed.

In this paper, the text font, font, size, respectively, in the book about the font design occupies an important place what.

The Font command is available only when you are in an item. Please open an item, other than a Note.

The Underline font style is applied to the Font and the ForeColor is set to blue to make the label appear as a link.

The Christian incarnation, he says, has been described as "the font of Western realism. "

Retrieves information about the font specified by the current visual style element.

Represents the font effects used in formatting.

If you use another operating system, please follow the standard instructions to install the font.

If this option is turned off, then the font named in the "Editor Font" option will be used instead of the system font.

That provides information about the font specified by the current visual style element.

The font may be embedded but must only be installed temporarily on other systems.

To adjust the font sizes between the desktop and mobile platforms.

The font size is based on your font preference settings. The font may not appear in this size in other browser windows.

The font name of the cells defined by the cell coordinates and condition.

Tip: The font in the compose window can be changed in the fonts preferences.

You can change the foreground and background colors, and the font, font size, and bolding of the text.

Constructs a CStatusBar object, creates a default status-bar font if necessary, and sets the font characteristics to default values.

To change the publication's font scheme, click Font Schemes in the task pane, and then click the font scheme that you want.

Changes the font, size, and color of your message text.

When this occurs using an emulator, the font size on the screen automatically changes so that the entire screen fits in the emulator window.

This equation says the line height and margin are 1 and a half times the font size.

An enumerated value indicating whether the font is italic.

Aside from the font complaint I mentioned earlier, I found only two issues with Jubilee.

Toolbar followed by the font, size, bold, italic, underline and font color.

An elderly man squints at an automated teller machine (ATM) screen and the font size doubles almost instantly.

Returns or sets the font used in individual cells or ranges of cells.

Under Size , select the font size that, according to your font documentation, meets USPS requirements .

Increase or decrease the font size on your smartphone.

FontSize specifies the size of the font of the disclaimer text when the text is added to an e-mail message.

Normally, as the heading number gets bigger, the font gets smaller.

Changes the font style and size for the text that appears in ToolTips displayed in the editor.

Then I add the result to the font size property like shown in Listing 11.

This means your web page won't look great to the majority of your viewers. They will only see the font they have on their own computers.

Structure that specifies the upper left-hand coordinates of where to draw the font.

You can see the disproportion between the font size and the size of the icons.

In the "Text translation" frame, you can specify the font family, size, style, text color and line height.

Specifies the font family that describes the font in a general way .

The font contains 192 characters and two weights (regular and bold) and is available in OTF for PC or Mac.

Select sans serif as the font family and small as the font size from the drop down list.

With this, if the viewer's computer doesn't have the font you are using, it has alternative choices.

Changes the font and character spacing formats of the selected text.

Notice how the font-size is used to make the different pricing plans more distinctive.

An enumerated value indicating whether the font is bold.

You can create e-mail stationery so that your messages will always have the font and formatting that you prefer.

The font that students should use throughout the document should be size 12 Time Roman.

The font size also corresponds to a Fibonacci number.

Gets or sets the font used to display text in the control.

Font specifies the font of the disclaimer text when the text is added to an e-mail message.

Can be modified according to user needs the font, color, size, etc. , suitable for beginners.

The font may be embedded and temporarily loaded on the remote system.

Represents the font size used in formatting.