surface modification

A novel non-toxic chemical conversion treatment with low energy consumption was used for the surface modification of magnesium alloys.

The interface bonding of the fiber can be improved by the surface modification with the liquid-phase oxidation and plasma treatment.

Finally from the surface modification, metal-coated carbon-doped and an analysis of three modified to have greater advantages.

In plasma source ion implantation process, the sheath evolution has a very important influence on the surface modification of materials.

The test results show that the surface modification of GCC by cation starch for improving its retention rate is a rather economical choice.

RESULTS AND CONCLUSION: The surface modification methods include plasma spraying, micro-arc oxidation, sol-gel and biomimetic methods.

The single fiber pull-out method and NOL ring test were used to characterize the surface modification properties of UHSPE fiber.

The surface modification has been studied on AN filler of solid propellants in this paper, by using silane and titanate coupling agents.

OBJECTIVE: To conduct the surface modification of PLA and improve its hydrophilicity with low temperature plasma treatment.

The surface modification to the particles can dramatically influence their application values.

The surface modification of coal fly ash and its adsorption mechanism are summarized.

The combustion synthesizing(self-propagating high temperature synthesizing) is one of the active techniques for surface modification.

The surface modification is pentaerythritol ester, triple phenoxy phosphorus or acrylic ester.

A great many of methods could be used for surface modification, as a whole, which mainly included chemical and physical method.

The surface modification makes no obvious difference in depurated efficiency.

The thermal shock resistance test indicates that the surface modification cladding is very stable and shows firm adherence.

The technology of surface modification was an efficient way to increase fatigue life of the mainshaft bearing of the aircraft engines.

In the area of manufacturing, lasers are used for drilling, cutting, joining, hardening, surface modification and micromachining.

After the surface modification, CNTs was mixed with polyester powder and then been extruded and chipped.

Surface modification has been shown to be a significant method to improve anticoagulation of conventional biomaterial contacting with blood.

Surface modification has been shown to be a significant method to improve anticoagulation of conventional biomaterial contact with blood.

Plastic additives, after the surface modification.

Low temperature gas plasma treatment was used for surface modification of wool to perfect wear behavior.

Powder Engineering and its Surface Modification ; -Water Treatment Technology ; -Instrumental Analysis .

The surface modification of ultra-high modulus polyethylene(UHMPE)fiber was conducted by atmospheric pressure plasma jet(APPJ)treatment.

Finally the influence of surface modification by means of plasma treatment on the thin-film devices are also studied and presented.

Blending with biodegradable polymers, cross-linking treatment and surface modification are the main methods used currently.

The FAS surface modification does not influence the optical properties of the coating, but improve its hydrophobicity remarkably.

So proper surface modification to improve the corrosion and wear resistance of magnesium alloys is of great importance.

The research status of surface modification on cermet coating microstructure by rare earths and its application development were introduced.

The dispersion and surface modification in the preparation of nanometer magnesium hydroxide and its application are briefly introduced.

Laser cladding is an advanced surface modification technique, having high potential in manufacturing wear-resistant coatings.

Uniform glow discharge at atmospheric pressure is widely used in surface modification and plasma sterilization.

In the modern semiconductor industry, cold plasma is commonly used in thin film deposition, etching and surface modification.

The low temperature plasma technology, as a rapid, easy and pollution-free process, is being widely applied in fiber surface modification.

The invention discloses a carbon fiber surface modification method, and relates to a carbon fiber modification method.

It can be extensively used for surface modification treatment of various pigments and fillers.

Chemical modification as manifested in crosslinked enzyme crystal, covalent attachment of polymers and surface modification retain useful.

Hydrogen-absorbing alloy, method of surface modification of the alloy, negative electrode for battery and alkaline secondary battery.

On the basis of using reasonable material, Surface modification to normal die & mold material is an optimal process method.

Study on the Surface Modification of Nanosized .

Diffusion metallizing is commonly used in material surface modification.

Various auxiliaries are applied to organic pigment synthesis and surface modification.

Plasma treatment conditions should be appropriate during surface modification of PBO fibers by oxygen plasma.

The basic properties, surface modification technology of nano-particles and the preparation of nano - modification coating are introduced.

The advantages and properties of low temperature plasma surface modification technology for textiles are described .

When processed through different surface modification technology, the modified kaolin in coal measures has d. . .

Transformation behavior and flexural strength of tetragonal zirconia (TZ3Y) are affected significantly by surface modification.

Measurement results show that the PTFE surface modification effect by AC pulse plasma is better that that by DC pulse plasma.

OBJECTIVE: To review the application and surface modification of bone tissue engineering matrix materials.

This paper introduced plasma and grafting methods of surface modification of materials and the application in tissue engineering.

The processing technology and necessarily of surface modification for cast aluminum alloy are presented.

The principle and method for surface modification of calcium carbonate with titanate coupling agent is described.

The dispersion and other properties of red iron oxide pigment can be greatly improved by surface modification.

Take attapulgite which through surface modification as materials to make filler and filling into rubber.

Surface modification was developed via self-polymerization of dopamine and covalent graft of heparin.

The technological process for surface modification of Shanxi Datong kaolin was researched in this article.

At the same time, the challenges for the application of new polymers for surface modification were also proposed here.

It is suitable for precise machinery, especially for surface modification of relatively moving parts in space machinery.

Albumin and PEG is used for surface modification of medical polymers to improve its hemocompatibility.

The necessarily of surface modification on wrought magnesium alloy was simply discussed.

Nanoparticles powder is inclined to agglomerate, so surface-modification of the nanoparticles powder is necessary.

Results This paper summarizes surface modification methods for metal materials, as well comments on all kinds of methods.

Several all-metal , large - volume plasma treatment equipments for polymer surface modification are developed.

The potential application field of stainless steel is extended by the laser surface modification technology.

PP; nano-sized ATH; red phosphorus; surface modification; flame retardancy; mechanical property.

The effect of vacuum ultraviolet radiation to surface modification was initially described.

In addition, the effect of surface modification on improving wear resistance, erosion resistance and biological properties was illuminated.

Organic surface modification of nano-attapulgite with silane coupling reagent LM -N308 was studied.

The process of surface modification of ATH and various factors effecting the process were described.

Nickel powder surface modification is the important part before being applicated.

To date, plasma and grafting has become main methods of surface modification of polymers.

In order to improve wearing resistance of the seal and prolong the operational life span, surface modification must be done to the seal.

Therefore, the development and application of surface modification technology is the key to improving mold lifetime.

The mechanism of surface modification is also discussed.

Fluorine-containing surfactants are mainly used as demoulding agent, surface modification agent, an static agent and so on.

Amylatic reaction, IR and EDS analysis indicate the MWNTs surface modification by soluble starch.

AIM: To observe the development changes of silicone intraocular lenses (IOLs) of surface modification implanted into rabbit eyes for 180d.

The dispersion and stability theory, surface modification methods and technology of nanoparticles as load-carry additives were described.

We can improve the high-temperature transmittance of sapphire by surface modification.

Polar reagents such as hydrofluoric acid, phosphoric acid, formic acid and 2-propanol were used as surface modification reagents.

Plasma technology has been applied in polymer material surface modification more and more extensively.

The Surface Modification of the Superfine Talc Powder and Its Influence upon the PP

the research findings and the industrialized technologies of the surface modification of fumed silica in recent years were reviewed

A Method for the Surface Modification Processing of the Polycrystalline Iron Fiber

Application progress of low temperature plasm technique in the surface modification of textile material

Research on tooth surface modification of meshing pair of the movable toothed end face harmonic gear transmission

A New Plasma Source and Its Application in the Surface Modification of Fabric Materials

Application of Low-temperature Plasma on the Surface Modification of Protein Biomaterials

The surface modification of the dental aluminum alloy splint by anodic oxidation

The Surface Modification and Characterization of Nano-Attapulgite

Study on the Surface Modification Technology of Aluminosilicate Trade Waste

Research on the Surface Modification of the Metal-Hydride Electrode

Study on the Surface Modification of Ultra-high Molecular Weight Polyethylene Fiber

The study of the surface modification of biomaterials in tissue engineering

The Surface Modification of nano-Calcium Carbonate by In-situ Polymerization

The Surface Modification of Collagen Fibers and Function of Tanning Process Based on the Low-temperature Plasma Technology

Research on the surface modification of the MH electrode with silver

Experimental Study of Running-in and Surface Modification of Internal Combustion Engine

Research on the Surface Modification of Activated Carbon Carriers

Advances in the Surface Modification of Polyolefin Membranes

Progress in the Surface Modification Research of Inorganic Nano-oxides

Development of the Surface Modification Technology of Carbon Fiber

Study on the surface modification of the MH electrode with cobalt

Study on the Surface Modification of ZSM-5 Zeolite Molecular Sieves for Increasing Propylene Production

Study on Plasma Surface Modification of PolypropyleneNonwovens Fabric Used for Battery Separator

Micro-fabrication and surface modification of fluorinated polymers by means of synchrotron radiation

On the Surface Modification of Calcium Sulphate Whiskers

The Surface Modification of Calcium Carbonate

Study on the Surface Modification and Blood Compatibility of PET

Study on the Surface Modification of Hydrotalcite

Hydrophilic surface modification of polysulfone hollow fiber membrane by acrylic acid treatment and its application to peptide separation

Study on the Surface Modification of Nanometer ATO Powder

Study on the Surface Modification of Ultra-fine AlN Powders

Study of Technology for Powder Surface Modification by Turbulent Air and Adsorption Mechanism of Silane Coupling Agent

Study of the Synthesis, Surface Modification and Optical Properties of CdS Nano-Particles

Surface Modification of Magnetic Silica Microspheres and Its Application to the Isolation of Plant Genomic Nucleic Acids

Choice of dielectric barrier discharge gap at atmospheric pressure and its application to surface modification of materials

Research on surface modification of magnesium hydroxide flame retardant and its application in polypropylene

Progress in Study of Surface Modification Technology of Inorganic Superfine Particle

Study on the Surface Modification of Steel Slag

Surface Modification of Ammonium Nitrate Particles through Coating and Its Hygroscopicity

Pigments and Fillers Used in Exterior Wall Latex Painting with High Properties and Their Surface Modification

Status and Development of Preparation and Surface Modification Methods for Electrophoretic Particle Used in Electronic Ink Displays

Continuous Powder Surface Modification Equipment Used in Large Calcium Carbonate

Surface Modification of Neural Prosthetic Devices with a Novel Conducting Polymer

Surface Modification and Structural Characterization of Titanium Dioxide Nanoparticles

Surface modification of Yichang calcined sedimentary deposit kaolin and its application

Superfine grinding and surface modification of carbon black from pyrolyzed waste tire and its application in NR compound

The situation and the forecast on study of membrane surface modification using photo-grafting polymerization technique

Surface Modification of Polytetrafluoroethylene Film with Electron Cyclotron Resonance Plasma

Status of wollastonite industry and its surface modification and characterization

The Technology of Nanometer Calcium Carbonate Surface Modification and Its Development

Improvement of blood compatibility of small intestinal submucosa used as engineering vascular scaffolds by nano-bionic surface modification

Surface modification of ultrafiltration membrane and its application

A study of surface modification of titanium alloy by chemical treatment following laser fusing

Advances in Biomaterial Surface Modification for Biomolecules Immobilization Using Low-temperature Plasma

Surface Modification of Potassium Titanate Whiskers and Reinforcement Effects of Polyolefin Composite Materials

Elastic Aluminum Solid Surface Modification by Low Temperature Plasma and Its Applications

Surface Modification of Calcined Sedimentary Deposit Kaolin and Its Application

Surface Modification of Polypropylene Microporous Membrane by the Immobilization of Dextran

Surface Modification Analysis of Treated Wollastonite Powder by Infrared Spectrum and Their Preparation Mechanisms

New Technology of Toner Preparation with Mineral Pigments Surface Modification and Suspension Copolymerization

Effects of Surface Modification on Rheological Property of the Zirconium Superfine Powder Suspensions

Surface modification of proton exchange membrane by polyaniline and its performances

Advances of the Application and Research in Surface Modification of Biopolymer Materials Using Ozonization

Progress of Cold-Plasma Techniques of Surface Modification Applied to Metallic Biomaterials

Surface Modification of ATO Powders through Liquid Process and Investigation of Its Mechanism

Superfine grinding and surface modification of wollastonite and its application in rubber

Experimental Research on Surface Modification of Sepiolite and Its Application

Surface Modification of Potassium Titanate Whiskers with n-octadecyltrichlorosilane

Investigation of Dielectric Barrier Discharge in Air for Materials Surface Modification by Optical Emission Spectrometry

Study progress on preparation and surface modification technology of the sparkling aluminium pigment

Surface Modification of Carbon Black and its Electromagnetic Performance

Research on Surface Modification of Calcined Sedimentary Kaolin and Its Application

Surface modification of microfluidic chip and its application in protein enrichment

Surface modification of fibrillar silicate and properties of its rubber composites

Study of Surface Modification for Coal Kaolin Powder by Infrared Spectrum Analysis

Study on Surface Modification Hydroxyapatite Composites by Monophosphatase Coupling Agent

Recent Developments in Silica Research: Preparation, Surface Modification and Application

Progress in Study of Surface Modification of Nanosilica and Its Application

Inorganic Nanometre Particle's Surface Modification and its Application in Textile

Preparation and Surface Modification of White Electrophoretic Particles Used in E-ink

Influence of Surface Modification Via Grafting Polymerization on the Barrier Properties of Polyethylene Membrane

Separation of Soybean Protein by Ultrafiltration Membrane with Low Temperature Plasma Surface Modification

Surface modification of solid particles and its application in propellants fields

Surface Modification Study of Fine-White Aluminium Hydroxide

Surface Modification of Pyrolytic Carbon Black from Waste Tires and Its Use as Pigment for Offset Printing Ink

Synergistic improving fretting fatigue resistance of Ti alloy at elevated temperature by duplex surface modification

Surface Modification of Polytetrafluoroethylene with Atmospheric Pressure Plasma in Air

Surface Modification Technology of Polyethylene Fiber for Reinforced Composite Material

New Development in Surface Modification Technique for Improving Adhesion Property of Polyethylene Coating in Oil and Gas Pipelines

Surface modification of light calcium carbonate and filled to styrene-butadiene rubber

Study on Surface Modification of Polytetrafluoroethylene Using Atmospheric Pressure Glow Discharge in Air

Laser Surface Modification of Titanium and Its Alloys for Biomedical Application

Study on Surface Modification of Silver-containing Ultrafine Inorganic Antibacterial Particle

Corrosion Behaviors and Surface Modification of Magnesium Alloys for Biomaterial Applications

Surface Modification Technology of the Biomaterials for Tissue Engineering

Development State of Laser Surface Modification Technologies of Mg-Base Alloys

Research on Surface Modification Technology using Electrical Discharge Machining

Preparation of nano-sized strontium titanate powder and research on its surface modification process

Surface Modification of Semiconductor Photocatalyst

Surface Modification Technology of Ultra High Molecular Weight Polyethylene Fiber for Composite Material

Surface modification on magnesium by alkali-heat-treatment and its corrosion behaviors in SBF

Research Status of Biomedical Titanium Alloys and Its Surface Modification

Researches on Surface Modification for Prevention of Bacterial Adhesion to Implanting Biomaterials

Surface Modification of Low Temperature Isotropic Pyrolytic Carbon Artificial Heart Valve Material

Surface Modification of Nano-Silica Used in Cathodic Electro-deposition Paint

Influence of surface modification by mechanical force on corrosion resistance of aluminium-containing coatings on Mg alloys

Enzymatic Surface Modification of Polyacrylonitrile Fibers

Surface modification on cenosphere and its wave absorbing properties

Surface Modification of the Nano-silica and Its Application in Neoprene

The Current Research for Surface Modification of Magnesium Hydroxide as a Flame Retardant

Study and Development on Surface Modification Technology of Aluminum and Its Alloys

Research on Characterization of Surface Modification Wollastonite

Resolving Doubts on Modification Mechanism for SLG Continuous Powder Surface-modification Machine

PAN ultrafiltration membrane surface modification by low temperature plasma treatment with oxygen

Infrared Spectrum Research on Surface Modification of Aluminum Hydroxide Superfine Powder Fillers

In vitro Surface Modification of Spherical Calcite Polycrystalline via Microwave Heating Reaction

Effect of surface modification and particle size on the properties of the bonded NdFeB magnet prepared by injection molding

Preparation of Oral Galantamine Sustained-release Suspension by Resins Surface Modification

Technology of Particle Surface Modification and Its Evaluation

Surface Modification of Wollastonite and its Effect Evaluation

Analysis of Ferrite Magnetic Field and Its Effect on Surface Modification of PET by Fluorocarbon Plasmas

Surface Modification of Calcined Coal-measures Kaolin in Yichang and Its Application in SBR

Flame sprayed and plasma spraying could be adopted to surface modification of wrought magnesium alloy;

Study progress on preparation and surface modification technology of the nanometer zinc oxide

Research progress of atmospheric pressure glow discharge plasma and polymer surface modification

Application of Dielectric Barrier Discharge in Surface Modification of Insulating Material

Surface modification of high molecular textile materials with dielectric barrier discharge

Material Surface Modification Processing with Laminar Plasma Technology

Study on New Atmospheric-pressure Plasma Reactor and Application to Surface Modification of Blood-filtering Material

Nano-Structuralized Surface Modification for Biomedical Titanium

Surface Modification of Non-metallic Mineral Powder and Evaluation of Its Effect

Effects of Surface Modification and Dispersion Mode of Magnetic Particles on the Stability of Silicon-oil Based Magnetic Liquid

Application of cold plasma in surface modification of polytetrafluoroethylene

Investigation on EPS Surface Modification and EPS Thermal Insulation Mortar's Weather-resisting and Crack-resisting

Study on ultra-fine grinding and surface modification of sericite and its application

Surface Modification of Nano-Calcium Carbonate and Its Application to Rubber

Research on NURBS Surface Weight and Its Application in Surface Modification

Surface Modification and Microwave Adsorption Properties of Hollow Nickel Sub-microsphere

Application of surface modification on improving the properties of interventional devices

improving the performances of mica - titanium pearlescent pigment by surface modification

Study on synthesis of nano Zn-Al hydrotalcite-like compounds and its surface modification

Surface Modification Techniques to Improve Corrosion-Resistance of Magnesium Alloys

Welding Quality Supervision Management of In-service Boilers in Heating Surface Modification Project

Surface Modification and Microstructure of Single-walled Carbon Nanotubes for Dental Composite Resin

Surface Modification of Magnesium Hydroxide and Its Application in LDPE

A Study of Rubber Surface Modification Using Microwave Plasma

Research on surface modification of microelectrode biochemical sensors

Fabrication and Surface Modification on Biocompatible Porous Magnesium

Surface Modification on Ceramic Coating by Rare Earths and its Development Trend

Effect of Rare Earth in Surface Modification on High Temperature Oxidation Resistance and Corrosion Resistance of Materials

Photochemical Immobilization-A New Approach to Surface Modification of Medical Polymer Materials

Preparation and Surface Modification of Hydrated Aluminum Silicate from Aluminum Bearing Waste

Surface modification of glass slides by monoclonal antibody for protein microarray fabrication

Current Status of Research on Electrical and Magnetic Properties And Surface Modification of Carton Nanotubes

The Applications of Low-temperature Plasma Treatment in Surface Modification of Polymeric Materials

Research Progress in Surface Modification and Micro-Tribological Behavior of Single-Crystal Silicon

Progress of research on osseointegration and implanting surface modification

Surface Modification and Thermal Decomposition Action of Aluminium Hydroxide

Ammonium nitrate surface modification through spraying and drying technology

Progress on Synthesis and Surface-modification of Thermoplastic Polyurethane

Preparation of Gelatin Nanoparticles by Desolvation and Surface Modification

Surface modification of materials by ion implantation and tribological application

Research Progress of PBO Fiber and its Surface Modification Technology

Synthesis and Surface Modification of Tin-Copper Alloy Anode for Lithium Ion Battery by Electrodeposition Process

Preparation of Mg-Ni hydrogen storage alloy by two-step method and its surface modification

Study on Surface Modification of Sericite and Its Application in Natural Rubber

Study on Methods of Biomaterial Surface Modification for Improving the Antibacterial Adhesion